How to transport a Cube after a remodeling activity?

Hi
I did a remodeling in a cube, where I´ve added 2 new fields.
It´s being working pretty well in Dev, also the update rules, Cube, ODS, infopackage, everything looks fine, but when I closed the request with the remodeling activity and transported to QA, the changes did not appeared.
My question is, should I transport the Cube again? In this case, should I add in the transport package, update rule, ODS, whatever it´s depended of this Cube?
Thanks
Rody

Hi
Guys Thanks for all the support until now! But did not work at all.
I tried this load several time, each time I´ve tried to bring less records setting some restriction in the Infopackage, but did not resolved either.
I´m creating a new request with everything, Cube, Update, Info, fields, and see if this time it will go ahead.
I´ve also tried other load that uses the same logical source system and it worked, so I guess it´s something related to this specific change.
Any clue will be appreciated.
Thanks

Similar Messages

How to trigger an SMS after creation of Activity / Interaction Record

Dear Experts,
Our Client requirement is to trigger an SMS immediately after creation of an Interaction Record. I want to define an Action for this.
But what processing type should I use for SMS, (like Method Call, Smart Forms Mail / Fax / Print and Workflow). We are using an external service provider domain to send SMS to our customers. It has been configured in SCOT.
But from CRM configuration front there is no specific processing type for SMS. then how system reads telephone number from the BP master.
Kindly help me to resolve the issue, your suggestions will be highly appreciated.
Best regards
Raghu ram

Raghu,
In your case you could copy a "print" action method class and create a z-version. Then modify the print action method so that the smartform output triggers a call to your output type.
Or you could just code a new method that creates a new BCS send request using the CL_BCS document and your output type.
It just depends on how whether you want to use smartforms to build the message or build it in some other method.
Take care,
Stephen

HT4623 how to change phone number after its been activated?

After I purchased the iphone 4S and it was activated, I had my old number transported. The Iphone still shows the number originally assigned by the carrier. Apple support says to reset network settings and that will correct the problem. Didn't work. Now what?

Settings/phone then my phone number

How to delete the duplicate requests in a cube after compression.

Hi experts,
1. How to delete the duplicate requests in a cube after compression.?
2. How to show a charaterstics and a keyfigure side by side in a bex query output?
Regards,
Nishuv.

Hi,
You cannot delete the request as its compressed as all the data would have been moved to E table ..
If you have the double records you may use the selective deletion .
Check this thread ..
How to delete duplicate data from compressed requests?
Regards,
shikha

How to transport inforource assignment for virtual cube?

hi,
I have created SAP Remote Cube on dev, transported it and its infosource, but I do not know how to transport cube - infosource assignment.
How to do this?
Regards,
Andrzej

hi Maran,
you were wrong, but I solved this problem - system assignment is not transportable.
http://help.sap.com/saphelp_nw04/helpdata/en/3b/63c620e18411d4b2d90050da4c74dc/frameset.htm
Regards,
Andrzej

The Creation of Export DataSource Failed Error while transporting ODS Cube

Hi All,
I am facing this issue from last 1 week.. i had developed an ODS cube in APO-DP BW which will fetch data from SAP R/3 and its working fine in APO Dev Server. But when i transport this cube into APO PAC(Prodn Server) the below error i am getting..
   Start of the after-import method RS_ODSO_AFTER_IMPORT for object type(s) ODSO (Activation Mode)
   The creation of the export DataSource failed
   Password logon no longer possible - too many failed attempts
   Password logon no longer possible - too many failed attempts
   Error when creating the export DataSource and dependent Objects
   Error when activating DataStore Object ZANAUTSL
I also updated the transport conversion tables but still problem not resolved.
Immediate help is hightly appreciated.
Thanx
AJ

Hi AJ,
Looking at your error, it seems that the RFC user's password is locked and hence connectivity from R/3 towards APO BW is broken.
You know the name of your export datasource (from R/3 to APO BW). Find out the name of your R/3 source system e.g. PACCLT000, by scrolling to the right against teh export data source.
Take help of your Basis or EAI team to identify the RFC destination corresponding to the connectivity from the R/3 source system (PACCLT000) to your APO BW system. (If needed ask for help from your BW team, I am not very sure how connectivity would be set up from R/3 to APO BW, I guess this would be independent from CIF connectivity)
For this RFC connection from R/3 to APO BW, see which RFC user is maintained in SM59 in APO and ask your security team to reset (or unlock) the password of this RFC user in R/3, and then if required update the user password details in SM59 in APO also.
After this, your issue should get resolved.
Thanks - Pawan

Error while transporting the cube

Hi all,
While I was transporting my cube from Development box to Acceptance box, following error occured.
 Execution of programs after import (XPRA)
 Transport request : GCDK905220
 System : NCA
 tp path : /usr/sap/NCA/DVEBMGS01/exe/tp
 Version and release: 372.04.10 700
 Post-import methods for change/transport request: GCDK905220
 on the application server: bdhp4684
 Post-import method RS_AFTER_IMPORT started for CUBE L, date and time: 20080802045222
 Program terminated (job: RDDEXECL, no.: 04522200)
 See job log
 Execution of programs after import (XPRA)
 End date and time : 20080802045237
 Ended with return code: ===> 12 <===
Actually transport failed but the cube was present in the Acceptance box in inactive state
Please help me for the same.
With thanks and regards
Mukul Singhal

Hi Mukul,
This is an RC=12 issue.Contact the basis team or raise ticket basis team stating that your specified transport request is got terminated.Basis team will resolve the issue and then you can Import the transport into your acceptance system.
I hope it will help you.
Regards
Suresh B.G.

Compare data in R/3 with data in a BW Cube after the daily delta loads

Hi Friends,
How can I compare data in R/3 with data in a BW Cube after the daily delta loads? Are there any standard procedures for checking them or matching the number of records?

Hi Sunil,
If you want to check the records daily instead of checking the data in R/3 manually ......
You can try this...
If you have staging DSO(level 1) that means whatever data is in source system load it to Staging DSO without any routines or any modifications.
Now load this DSO data to Cube or DSO(level 2) as per your requirement with routines etc.
Now Staging DSO contains Source system data.
Now the level 2 Cube or DSO contains BW data with some modifications.
Now create a Multiprovider based on level 1 and level 2 data targets.
Now create a report on which keyfigures you want to test the data.
In Multiprovider there is a field called 0infoprovider in data packet dimension.
you can drag this infoprovider to the columns and restict your keyfigures with level 1 and level 2 data targets.
In the first column you can see the level 1 DSO data ( source system data),in the 2nd column you can see the BW data.
Now create a formula which gives the diffrence b/n level 1 and level2.
that is R/3 data - BW data.
If the diffrence is zero both R/3 and BW data are same.
if the diffrence is not eqaul to zero check whether any routine is there or not.

How to Transport standard text in scpits from 1 client to other

HI I am veerendra,
Can you please tell me,
How to Transport standard text in scpits from 1 client to other
THanks,
Veerendra

Hi veerendara,
1. a little tricky
2. goto se09 and create a new
customizing rqeuest.
3. after that
in the object list,
go in edit mode
and a new window will come
where u can add the objects(in table control)
4. there u put
program id = R3TR
object type = TEXT
object name = TEXT,YHRS_FNF_LTR,YHR1,E
where
TEXT = TEXT
YHRS_FNF_LTR = name of standard text
YHR1 = TEXT ID
E = english language
regards,
amit m.

How to enhance the cube to include 0CS_TRN_QTY

Hi Gurus
In 2004S what are the steps to enhance the field, please help me.
How to enhance the cube to include 0CS_TRN_QTY, this field is coming from GL Totals table? this is new table included to 2004S.
please help me
Thanks
lalit

Hi Lalit,
1) Go to Rsa6 and select the DS that belongs to your particular cube , and double click on it and note down the ES name .It is
2) Go to Se11 and keep the ES name at DATATYPE and clcik on Display. and then Click on Append structure Button.
3) Give the techinica name to AS in the immedaite screen and then give description in other screen and enter the zzfields that you want to add. Finally activate the Append Structure.
4) aggin goto RSA6 and enter into change mode for the DS , and then remove tick mark for newly added fields aginst Hide only .
5) Replicate the DS into BIW.
6) give th ccoding for these newly added fields in CMOD.
7) in CMOD , you need to use already existing project. If there is no project existing,then create new one . While creating take RSAP0001 as Enhance ment assignement.
8) you have to code the ABAP lines in EXIT_SAPLRSAP_001 component and in the include ZXRSAU01.
9) Donot forget the activation of Project and include after every modifications.
Regards,
Lakshman.G

How to transport requests from development to production server

hi gurus
i am new to SDN
can u pls give me detailed information how to transport requests from development server to production server?if possible give me screen shot documents
regards
surya

Hi
Transporting
There are help pages that discuss creation of transports.
In simple terms, you: create a transport package
add objects to the package export the package, plus optionally any related objects to a predefined folder/directory on the portal server into a file with an extension of .EPA copy the .EPA file to the import folder of your QA system and import it test the contents on the QA system copy the .EPA file to the import folder of your production system and import it Create a transport package file
Here is the step by step procedure to create a transport package:
For Export
1. Go to system administration, and click on transport?export.
2. In the middle pane, select the folder you want to export and right click on the Transport Package. 3. Fill in the General Properties i.e the name of the package, id and description. 4. And say finish and open the object for editing.
5. When the object has been opened then right click on the object you want to transport, and say "Add object to the Transport Package".
6. Check the checkbox of the item u have added and see the properties if it has been added properly. 7. Now click on the save button.
8. After the object is saved, click on the export button. 9. U will have an option to select where to store the .epa file which will be generated. U can overwrite an existing one by selecting the browse button, or store it with the generated name in the location it automatically generates. 10. Now Click on the Start Export button.
11. once the export is completed, it shows a report on how much time is taken to generate the .epa file. 12. Here there is an option for downloading the .epa file. Click on the link and download the file. This file is ready to be uploaded into any other EP Server.
For Import:
Pre-requisites: You have to copy the .epa file created while export into the local drive. Optionally, you have to manually copy the .epa file generated in the export function into the Import directory of the server ie. chooseFollow the steps below for importing a certain file. 1. Go to System Administration in the portal, and click on Transport?Import. 2. For the source of the package, Click on the radio button Server for the .epa file you have copied lately. Else, click on the radio button on client if you are operating in the client and select the .epa file you have stored on the local drive. 3. Now select the file from the browse option and click on Upload.
4. Now click on the import button. 5. Once the import process is finished, the report is shown. In the whole process, the par files are not included in the .epa files. For the par files to be included into the .epa files then we have to change the pcdStartup.properties file in the server. The property to be changed is Pcd.TransportApplication.Export.ExcludeObjectTypesAfterRuleProcessing: Keep this property's value as empty for enabling the par files to be uploaded into the .epa. You can check for this property in the portal in the following -System Administration-Support-Portal Content Directory-PCD Configuration.

How to Transport LSMW to development server to Prodution server

Hi all,
I would like to know how we transport LSMW(project, sub-project, Object) from development server to Production server.
Thanks
Vipin Nagpal

Hi Vipin,
Actually, it depends based upon the requirement. There are some advantages and disadvantages with both of the methods.
See the following documentation. I think this would be helpful for you and based upon your requirement you proceed further.
Transport LSMW Projects
The LSM Workbench provides data transport for a project via both the SAP transport system and down-/upload. (Excluded are the presettings for IDoc inbound processing. These presettings should be manually created in every SAP system and every client.)
1. Generate Change Request
Choosing this function creates an SAP change request containing all information about an LSMW project. This SAP change request can be exported / imported with the usual means of SAP correction and transporting. You can find this function in the initial screen under Extras -> Create change request.
When transporting LSMW data this way, you can trace the transports any time in SAP correction and transporting.
Note 1: When importing such a request, the complete project is deleted from the target system first. It is then created again.
Note 2: When exporting the transport request, all changes to the selected project made until the time of export are entered (not only until the time of creation of the transport request.)
2. Export Project
In the initial screen, select Extras  Export project. This first displays the structure tree of the selected project. Via Select / Deselect you can select whether the entire project or parts of the project are exported. Then select Export. The program then creates an ASCII file.
Note: The selected elements are exported together with their documentation
3.Import ProjectThe exported mapping and rules can be imported into another SAP system.
On the selection screen, select Extras -> Import. The program then prompts you to enter the name of the PC file. The file is imported and the contents are analyzed. After the analysis, a list of the subprojects and objects found is displayed.
You can now mark the objects to be imported. Project data existing already are check-marked. They are overwritten by the import.
You can prevent a project already existing in the target system from being overwritten by using function "Import under different name".
Note: The selected elements are imported together with their documentation.
If you feel this is helpful, don't forget to reward points.

How to transport the DTP

Hi Guys,
I have created one new info cube and transformations and DTP's on the info cube in development. Now i want to transport info cube and transformations and DTP 's to quality and production system.
i am tryting to collect these objects into transport in the transport connection and i have selected my info cube and
and i selected the option "Data flow afterwards" in the Grouping
it dsipalyed only info cube name and transformations and info object, it didn't display the DTPS , so how to collect the DTPs and transport DTP's to quality and prodcution system. Please suggest me if i miss anything there.
and also i have another question is
do we need transport DTP from Dev to quality and Production systems or do we create DTP in each system seaprately.
Please suggest me how ti proceed. Please share your thoughts on this.
Thanks
SG
Best regards
SG

Hi,
If you want to transport the DTP just double click on your DTP -
select GO TO menu--Object Directory Entrygive the package name and select the request in which you want to collect it.
Regarding creation of DTP in QA and PRD itself that varies from client to client.Some client give authorization to create directly and QA and PRD whereas some want everything to be transported form one system to another.
Also read about object chageability as well.
http://help.sap.com/saphelp_nw70/helpdata/en/0e/a7343e8c7f6329e10000000a114084/frameset.htm
Hope it helps.
Regards,
AL

How to transport the webdynpro applications from development production

Hi Experts,
We are implementing the first time NWDI for development.
As per my knowledge . There will only NWDI available for the whole landscape to manage and track the information.
NWDI will only one for the whole landscape?
How do we need to transport the ;build application from the dev sytem to production through NWDI.?
How the transport life cycle will be managed with NWDI and with out using NWDI?
As of my knowledge . we need to specify the production or testing mechine information in the NWDI to transport the build file from deve to -> testing to -> production.
Because my clients not allowing to specify the the production system information in nwdi to transport from dev to prodution using nwdi?
what is the other solution available?
By giving the production information in NWDI will give any problems futher?(like security).
Regards
Vijay

HI,
NWDI is Simply used to manage life cycle.
A developer will develope application. that time he needs to create an activity.
1. when activity is checked in & activated -> code is sent to DTR in development space, and CBS builds that code and its .sda or .ear file is deplopyed on development server.
2. same when you release it -> code is sent to DTR in Consolidation space and CBS builds and deploy it on consolidation server.
3. after that you can assemble you whole development in single file i.e. .sca file, and its get deployed on test server.
simple..
and if your client dont want to specify production system in NWDI., then when you assemble an .SCA file of your development, just copy it from CMS folder of your NWDI installed drive. and send it to your client..
he will externally deploy it on production

How to transport the text elements

hi guru's,
i need answer to this question.
how to transport the text elements in the sap script?

Hi,
U mean Standard Text?
Standard Text can create using SO10.
Use RSTXTRAN Standard Program..
Do Like this..
Goto se38 and enter program name as RSTXTRAN
and press F8..
and give Text-key Name as Standard Text Name
then Press F8..
And select Select check box.. and enter
and press on trsfr to corr button..
it asks transfee textxs to a correction..
press on yes button..
it will show request number or create your own request...
and after goto SE10 tcode and Transport it...
Regards,
KK

How to transport a Cube after a remodeling activity?

Similar Messages

Maybe you are looking for