How to transport a Enhancement Project for extractor (CMOD)

Hi all,
how can i transport a Function Enhancement for a R/3 extractor (created on the CMOD transaction)?.
The extractor and the Structure Enhancement is already transported, but I go to SBIW and select the extractor under SAP-R/3 and select Function Enhancement, enter the project name and it's not transported.
thanks a lot

Hi Juan,
Have you tried activating the components (under this project) and project in the target system.
If you are unable to see the components/projects, you can try activating them in your development system, it will prompt for a transport request, which you can get imported into your target system. Hope it helps,
Sree

Similar Messages

I can't find how to apply sound enhancements (EQ) for the podcasts now with iOS 6.0 update

Dears at Apple:
I can't find how to apply sound enhancements (EQ) for the podcasts now with iOS 6.0 update on any of my devices(iPhone 4s, iPhone Touch (4th Gen), iPad (3rd Gen). Most of the "Podcasts" I listen to are music content based and wanted to apply sound enhancements(EQ) like before when integrated with ipod function. Can you consider to "fix" this issue?
Many Thanks!

OK Emanuel I found a solution! I dowloaded and installed "Denon Audio" app from the iTunes store & it works great! It has an EQ you can set curves on manually or use the (few) built in pre-sets. It is a player like the Music app that comes with the iPhone, etc. but restores the EQ functionality so we can adjust the audio of PODCASTS:-) Until Apple fixes this what I consider a bug I will be using the Denon app as my default music player!

How to publish Captivate (swf) projects for free

Hi Cap Users,
This is not really a question, more of a handy tip.
When I first started using Captivate I tried to find places where I could publish my projects for free. I've also seen lots of posts by instructional designers and students who want to get their projects 'out there' for little or no cost.
Here's a short vid that shows you how to publish .swf projects via Weebly.com. You'll need to create a weebly website first. It's all free and the the site builder elements are drag and drop, so you can have a simple site in place within minutes.
Weebly isn't set up for HTML5 as yet, but I'm sure that won't be far away.
Click this link to see a demonstration - saving your Cap file, uploading and publishing it.
Happy publishing!

Ok, then I Publish the folio in folio producer like Public and Free and that's all, it's ok? Then when I want to sell this folio, back to the folio producer, change to Public and Minorist and in the Android Market build the in-app product, it's ok?
PD: sorry for my english

How should I start my project for editing MP4 in Premiere E9

Hello,
I am new to the forums and to video/picture editing in general. The main disconnect I have is with all the different formats and such.
Long story short. I have Premiere elements 9. Im using a Flip Ultra HD (to my understanding it produces MP4).
I was wondering if someone could point me in the direction of the most accurate way to start my project in Premiere elements 9.
Thank you very much in advance to anyone who may be able to help.
-Jeff

You should select the Settings for a Flip Mino/Ultra HD project, then use Get Media to get the files from your camcorder into your computer.
You can see how to set up a project and get media in the first couple of tutorials in my free 8-part Basic Training tutorials at Premiere Elements support site Muvipix.com.
http://forums.adobe.com/thread/537685?tstart=0

How to load Cj01 create project for WBS level 1,2 and 3

Dear All
I want to load the project for WBS element.I had used IDOC project01 for the same but I am getting error as 'SaveReplica'method was not called up via ALE.I am presently trying with LSMW recording for tcode CJ01 in order to populate the
wbs levels 1 ,2 and 3 since the hierachy is not fixed i:e there is no limit as to how many 2 or 3 wbs levels are there so how shall i proceed with recording.If any body has migrated Projects for WBS elements please do share me.In my recording i am getting error 'Do not enter a level greater than 2'.is it that i have to carry t recording for each level seperately.
Tried with Bapi Bapi_project_maintain and all Bapis related to it most of the cases i am getting
error as to no initialization created though having executed Bapi_Ps_Initialization.
Regards
Somnath

Hi Somnath,
The BAPI, BAPI_PROJECT_MAINTAIN should work for any levels of requirement..and you dont need to initialize it. First, go through the documentation given in the SE37 transaction code. It will explain all. Just concentrate on the reference number. If you see in the example given there, two wbs elements are being created.
Then you have to use methods like create,save...unlike other BAPI's.
Just go through the documentation once.
Regards,
Vishwa.

How to Find implemented Enhancements impementations for any Transaction ?

Hi Folks,
We are having standard transactions to find User Exits, Customer Exits, Filed Exits, BAdis..
Accordingly, in any program, we can find out the enhancement code..
Similarly, If I implement any implicit enhancement , and if others run any transaction containing similar code in part of there application, how can these implementations can be traced out by others, with out debugging entire code..??
<<Text removed>>
Cheers..!!
Edited by: Matt on Feb 16, 2009 10:12 AM - Do not offer points

Goto CMOD
F4 for project,
information system
Yow can find the PLUS button on the pop up window.
Deselect inactive and partially active check box and press enter
You can find the projects activated.
Regards,
santosh reddy

How do I make OBJNR availabe for extractor 0PM_OM_OPA_1

I am woderign how i can see this fied and it value. It is in the structure but not in the extactor

Hi,
The field OBJNR is not found in the extract structure ICORDCST. Perhaps you extract structure was enhanced to add OBJNR. Check in the user exit for the datasource.
Bye
Dinesh

How to transport Authorize Function Group for a table

Hi, Expert,
I created a customize table ZF304 with Authorization Group ZFIG in development environment.   Somehow, the ZFIG did not transprot to QA. The Authorization Group for table ZF034 in QA show: &NC&
I need retransport the ZF304 table with ZFIG to QA.   When I use the SE54 > Utilities > Total Transport, the ZFIG did not show in the object list.
Is it necessay that the ZFIG need specific in the transport? or it is already include int eh ZF304 transport?
In other word, how to make the QA Authorization Group show 'ZFIG' in stead of '&NC&'. How to do the transport in RD0 to make this happen.
Thanks,
Helen

Hi,
Check if you have an entry in the transport request as depicted below:
Definition of a Maintenance and Transport Object     R3TR     TOBJ     ZF304       Object Locked
If not then please add it in your task.
KR Jaideep,

How do I creaet Enhancement Implementations for multiple main programs?

I need to implement an enhancement (ENHANCEMENT-SECTION buchen_03 SPOTS es_mm06ef0b_buchen INCLUDE BOUND.) in an include (MM06EF0B_BUCHEN) that is used by 2 different main programs (SAPLMEPO & SAPMM06E).
When I create an implementation, it is created for a specific main program.
How can I create an implementation that is executed irrespective of which main program calls the include?
Thanks
Rajeev Natarajan

Hello,
plaese apply my note 1020176.
Read the note carefully. It is absolutly necessary to activate the object in the specified order when appling the note!
Alternativly: Import SP12 when it is avialable.
Best Regards
Michael

How to find out Enhancement details for Sales Order

Hello,
Follwing is the scenerio:
As soon as Third Party Sales Order created, Header Billing block gets triggered (from Sales Doc settings in VOV8).
In Sales Order there are 4 items of items:
1. Hardware Material (Price) with Item Category, say A
2. Hardware Material (Free-of-Charge) with item category, say B
3. Service Material (Price) with Item Category, say C
4. Service Material (Free-of-Charge) with item category, say D
Now there is another billing block, at item level, for Hardware Material (Price) - item cat. A, ONLY.
I checked item cat. in VOV7, and this block is not configured there.
Sales Order saved (with pop-up message - Maintain Serial No. for Material, but as it's third party Order, stock is not in Inventory, so no Serial number at this point of time). PR triggered upon saving the Order. from PR, PO gets generated,and then MIRO.
Now, as vendor Invoice received with Stock details (Manufacturer's Serial No.), we go to VA02 and maintain Serial No. (Extra --> Serial No.) for all 4 types of material (Pls note that Billing block is for Hardware Price Material, but we need to maintain Serial No. for all 4 types of material) and save order.
As soon as, serial no. maintained, item level billing block gets removed for Hardware (price) material, automatically.
I need to understand how this functionality has been achieved?
More precisely how and where i can see the technical details, like What program is being developed, which user-exit is being used etc...
Thanks.

Hi Sumitra,
Since the system exit handler has to call your BADI go to SE24 and display
CL_EXITHANDLER
Chose method get_instance and set a break point.
And, then press F8, so it will show all the Badi's.
Regard's,
Shivesh Ranjan.

How to transport the LSNW project from one client to other

I have done one LSMW in DEV 100 client now i want to move the same to other clients. and one more clarification .. is LSMW client dependent or client independent.
thanks in advance !

You can "Export" and "Import" from one client to other client rather transport of an LSMW.
To do this, at first goto T.Code LSMW select the "Project", "Sub Project" and "Object" which needs to exported and then go to "Extras" (at top menu) and select "Export Projects" and save text file at desktop.
Now go to other client where you want this lsmw, at Target client, goto initial screen of LSMW and then go to "Extras" and select "Import Project", system asks you select text file. here you give above file and say "Import".
Now LSMW is ready use in target system as well.
REWARD IF FIND USEFUL

How to convert existing Flex project for iPhone?

Hi guys, I have a serious problem here with creating iPhone apps in Flash. I have created an app for the iPhone completely using Flex components long before CS5 came out. I've been looking for tutorials but with no luck. My issue is that I am not very sure how to convert the app to be used on iPhone.
As I've read the forums, some of you suggested compiling using command line. I guess that would be awesome. However, would it work if I'm using Flex framework? I've already tried to import my .SWF in Flash using loader.load() and add the mx.* component using addChild(VideoExample) I need just some solution that would save me days of searching and rewriting code, but any solution will be good. I have started a similar thread in Flash but if I get any answers here I will delete it.
Please respond, help would be very much appreciated!
Here's my mxml wrapper, from which I start the main application:
<?xml version="1.0"?>
<mx:Application xmlns:mx="http://www.adobe.com/2006/mxml" layout="absolute" applicationComplete="EntryPoint.main()">
</mx:Application>
Then I have a class which creates the main container:
package {
import mx.core.*;
public class EntryPoint {
 public static function main():void {
 var client:VideoExample = new VideoExample();
 var mxmlApp:Application = Application(Application.application);
 mxmlApp.addChild(client);
Here is the main class VideoExample:
package {
import mx.controls.*;
import mx.containers.*;
public class VideoExample extends Canvas {
 public function VideoExample() {
 super();
 init();
 private function init():void {
 loadImage();
 loadText();
 loadDisplay();
 startConnection();

I'm so sorry, I'm not really familiar with the codes.

Problem with transporting the enhancement screen.

Hi,
I have transported an enhancement project. The enhancement screen doesnt show up,instead it goes for a dump. How can i resolve this.
Regards,
Sathish.

yeah u can change the package.
check SE80 or se03 here u can change.
[code]IN SE80--->select PACKAGE option in the first LIST BOX
and in the second list box give ur Local PACKAGE like $TMP, then u will get list of OBJECTS in that LOCAL PACKAGE.
2.Select object which PACKAGE u want to change.
3.Right click on that Object ,there u will get option like CHANGE PACKAGE.[/code]
[code]Do one thing, GOTO -->SE51 with program name and Screen --->GOTO(menu item) ->Object Dic.Entry> here u can assign new PACKAGE.[/code]
Regards
Prabhu

How To Transport a Restricted Key Figures

Dear all,
can u plz tell me how to transport Restricted key figures for the first time.
i mean shall i create new package or shall i use the existing package only?
Regards
venu

Dear Venkat,
In qaulity the sales value for a week is showing correctly where as in the production the sales value is showing only for one material that to in the -ve...we have so many materials....
When i open a Query Designer in quality the system is giving a status message
[E865(RSO)]ERRORS: System is not set to Changeable - objects are not changeable
[b]When i click the documetaion on the error message the following is appearing:
Errors: System is not set to changeable - objects are not changeable [E865(RSO)]
Diagnosis
You want to change objects although the system setting is "Not Changeable".
System Response
The objects cannot be changed.
Procedure
Change the setting for the system or client to "changeable". You can do this using transaction SE06 or SCC4.
Venu

After bringing in the movie from a video camera in iMovie and enhancing it tiles and transitions etc how do you and where do you save the project for burning DVD's using iDVD?

Where do you save a movie project for burning DVD's using iDVD?

I recommend that you use SHARE/TO MEDIA BROWSER in Large size. Then in iDVD, you open the Media Browser and navigate to your project. You can drag it into your iDVD project from there.
You can also use SHARE/EXPORT MOVIE and save to the location of your choice. You can then drag and drop into iDVD.

How to transport a Enhancement Project for extractor (CMOD)

Similar Messages

Maybe you are looking for