How to transport a standard datasource from sap to biw?

hi friends,
I have one standard Datasource which is extracting data from a function module.
But if we see that Data source thr RSO2 then ,there a msg comes with 'Extraction from function module' with some name.
and i saw that function module separately thr se37.
but in RSO2 , i din find that function module name in this Datasource.
so anybody pls tell me how this datasource works and what can i do if i want to transport this data source to BIW?
pls help me out...

Hi Manisha,
You posted this under an ABAP forum, you should have posted it under a BI-forum.
You don't transport from SAP to BI, you just replicate from within BI. (ask you BI consultant).
regards, André

Similar Messages

HOW TO TRANSPORT THE STANDARD TEXT FROM ONE SERVER TO ANOTHER?

After creating the standard text in SO10 transaction
it will not ask for any transport request no while saving ,
i want to transport the standard text from development to test server.
how can we do that?

Hi Riaz,
To transport a Standard Text through a transport request , you need to attach the standard text through the transaction RSTXTRAN.
After executing the report RSTXTRAN , you can enter first the task name then the Object as TEXT , then the name of the standard text , ID as ST, then the language as EN or something else .then execute.
you cannot attach a standard text to an unassigned task.Firat you have to either activate a smartform or a script with that task then only you have to attach a standard text.
I think your query is almost answered .
Reward if you please.
Thanks & regards,
Ram

Steps to enhance a datasource from SAP CRM

Dear Forum,
Could you please provide me with some document to enhance a datasource from SAP CRM. Is it any different from enhancement of datasource from ECC datasources,
Thanks and regards,

Hi,
please look this:
Business Intelligence How-to Guides for SAP NetWeaver 2004 [original link is broken]
or here: How-to Guides for SAP NetWeaver Business Warehouse 7.0 [original link is broken]
Creating a datasource for generic extraction
regards
CSM Reddy

How to transport an LSMW object from dev to Quality and to Production?

hi All,
Could any one please specify how to transport the lSMW object from developmen to Quality and finally to Production?
Thanks in Advance.
Regards.
Abhilash.

Hi,
The "cleaner" way is using normal transport procedure via "Extras->Generate Change Request".
This will transport the entire project though, not possible to transport a single object this way.
step by step
1. Run Tcode LSMW in source system.
2. in the menu bar choose Extras-->Export. Now give the filename and save in your desktop.
3. Now login to destination system. again execute LSMW.
4. Now goto Extras-->Import.Give your file which was downloaded earlier.
5. Now tool bar click on import with diffrent name option and give your new project and subprojectname.
6. Now execute all steps.
Also refer the below link
http://help.sap.com/saphelp_crm50/helpdata/en/da/a22506a3291b418b759524b278dcde/content.htm
Please reward points if it helps
Thanks
Vikranth

How to transport wdj project code from one server to other server?

Hi, experts,
I development 100 wdj component and deployed them to development server(A_development_server).
I have download sca file of my WDJ project from A_development_server.
I have config the SLD and Track in the other development server(B_development_server).
I don't know how to transport the project code from A_development_server to B_development_server for download the project code ?
Do you give me some hint?
Best regards,
tao
Edited by: wang tao on Mar 12, 2010 4:41 AM

Hi Wang,
You can directly deploy project from A_development_server to B_development_server. For that you need to Define Runtime details under RUNTIME tab in landscape configurator for B_development_server in CMS. To access CMS, go through http://host:port/devinf
Automated Deployment into Multiple Production Systems
http://help.sap.com/erp2005_ehp_04/helpdata/EN/44/355093ba830a67e10000000a422035/frameset.htm
Getting Started with the Development Infrastructure
http://help.sap.com/erp2005_ehp_04/helpdata/EN/44/0d18d725301a78e10000000a1553f6/content.htm
Hopt it helps
Regards,
Arun

How do I remove standard apps from an iPhone 5?

I am an IT in a government office who just switched our fleet to iPhones. We are not permitted to use certains apps that are either not in our data contract, touch the Cloud, or cause cost/personnel issues. Those items I try to corral in a folder "Unusable Apps" on a separate page where the user has little eye contact with them (outta sight outta mind right). I go through the motions of turning off every notification, update, share feature, etc. I can find but the icons are still on the phone. I have a fleet of about 100 iPhones and at least half my users are sneaky & curious and often try to reactivate things I have already hidden or turned off per our agency telecommunications policy. I just want them removed all together so I don't have to keep going through this and for those who can't fight temptation - they won't have to anymore. How do I remove standard apps from an iPhone 5?

You may want to repost this in one of the iPhone for Business forums:
https://discussions.apple.com/community/iphone/iphone_in_business_and_education
You'll want to ask about Configurator.
My company uses iPads as part of a Point of Sale System. They have restricted access to many of the built in apps and deployed custom apps.
Best of luck.

How we will pull the data from Sap-Bi to sap-Bpc

Dear Experts,
Thanks for watching this thread.The whole data is available in SAP-BI.
My system environment is SAP-BPC MS7.5.
Now i want to load the data from Sap-Bi to Sap-Bpc ms.For that we need any Interfaces.
How we will pull the data from SAP-BI to BPC-MS for Master data and Transaction Data.
could you please provide me step by step guide.
Please guide me what should i do.
Regards,
Srinivasan.
Edited by: srinivasan.singari on Jul 22, 2011 8:20 AM

Tough Ask..
Because i have done dashboarding thru scritping (Dyanamic fashion tough) ..It is very good ..But when, coming to the one you asked i have the idea how it works but cannot really tell you wich would be better.
Each Route has its own limitations.That really depends on what exaclty your client is looking after..
So if you new to xcelsius and eager to learn ..I suggest you to give a go at all those..May be you can let me know wich is the best one..
1. QAWS,
2. Bex Query --> Crystal Reports --> Live office --> DashBoard.
3. Bex Query --> WebI --> Live Office --> Dashboard..
4. Webservices consuming BI Query,
5. Xcelsius SAP Netwever Connector.
But i suggest as of now use Xcelsius SAP netweaver Connnection...

How to delete G/L account from Sap?

Hello gurus,
Can any one please suggest me the procedure how to delete the gl account from SAP?
Regards
K.srinivasrao

Dear K.srinivasrao
If there are any Transactions posted in GL Account you cannot delete the GL Account unless the balnce of the GL Account
Go to OBR2 and delete the GL Account
In FS00 U can Mark the GL Account for deletion
hope this will help
Regards
CA.Prasad

Steps to create a generic datasource from SAP CRM

Dear Forum,
Could you please provide me with the steps to create a generic datasource from SAP CRM
Thanks for you time and efforts
Regards,

Hi,
Initially create a view or identify the table to create generic extractions, remaining process is same in all data bases such as CRM........
GENERIC EXTARCTIONS:
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/bi/generic%2bextraction
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/d3219af2-0c01-0010-71ac-dbb4356cf4bf
Generic Delta:
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/84bf4d68-0601-0010-13b5-b062adbb3e33
Assign points if these are useful.
Rgs,
I.R.K

How can distribute 5 lakhs records from sap R/3 setup tables ?

How can distribute 5 lakhs records from sap R/3 setup tables in to multiple requests in sap BI?

Hello,
what is "lakhs" ?
Please use plain English words on a world wide forum...
Regards,
Olivier

PPPI - Process Management - activating standard settings from SAP

System data ECC 5.0
I am trying to use process message category PI_ORDCO. The destination is not assigned. I think the destination should be PI14. PI14 is not listed in the dropdown list.
My guess is the system does not have the current standard settings from SAP "activated". Please help with activating SAP predefined destinations, characteristics, categories, instructions, etc.
Thanks.
(moved by to what I hope is the appropriate forum to get an answer to this)
Message was edited by: Marilyn Pratt

Hi
Please try this ->
<b>http://help.sap.com/saphelp_srm50/helpdata/en/56/54f137a5e6740ae10000009b38f8cf/frameset.htm
http://help.sap.com/saphelp_srm50/helpdata/en/bb/6c0e3b02616a42e10000000a11402f/frameset.htm
http://help.sap.com/saphelp_srm50/helpdata/en/62/fb7d3cb7f58910e10000000a114084/frameset.htm
http://help.sap.com/saphelp_srm50/helpdata/en/5e/88ef3bc8821d0de10000000a114084/frameset.htm</b>
Regards
- Atul

How to see all standard report in sap pm

hi
urgent
can somebody tail me
how to see all standard report in sap pm

hi
manoj
youcan see all the reprts in sap
in trs SAP1
OF ALL MODULES
YOU REQUIRE ANY Ifurther information mailme back

How will we send smtp mail from SAP via Exchange

Hi;
We changed SAP OS between Windows and Linux and still 4.6c . Now we use linux OS.
We used smtp mail at SAP via Exchange with 3.party (sendmail,indigomail etc.) But Now I dont know how will we send smtp mail from SAP.
Please help me,
Thanks for answers.
Moderator message: not directly related to ABAP development, please have look in the Netweaver forums, also search for available information on sending emails.
Edited by: Thomas Zloch on Nov 22, 2010 2:39 PM

Hi,
What is the nature of the URL you wish to include in the e-mail ?
Is it fixed or dynamic ?
Cheers
Colin.

How can i autoforward that mail from SAP INBOX to the outlook

Hi ,
My Requirement is that,
I have to send an email to outlook, whenever PO Created in SRM System
I have created custom workflow, i have added a sendmailtask step, i given the SAP userid to send SAP Mail to the user.
It is sending SAP Mail to the User to his inbox perfectly.
Now, how can i autoforward that mail from SAP INBOX to the outlook. This is has to work for all users.
Please give some suggestions. ot it can be achived any other way.
Note: This is Email Message not a workitem.
I have doubt that RSWW program will work only for workitems.*
Thanks & Regards,
Suresh.

Hi ST,
what I understand from your requirement is that you are able to send messages using SendMail Step to SAP Inbox and now you want it to be sent to users Outlook.
Here you need to create a container which would store users email address of Outlook (which would be stored in SU01 or in a ztable), use this container in your Send Mail step and in the Recepient Type as email.
Hope it helps.
Aditya

How to download Acrobat Standard X from a CD? Do I need to uninstall the existing Acrobat software?

How to download Acrobat Standard X from a CD? Do I need to uninstall the existing Acrobat software?

You download from the internet, not from a CD... you might install or copy things from a CD.
But to answer your question properly:
1. What is your existing Acrobat software, exactly, including version number?
2. Are you trying to install and getting an error? If so please give full details.

How to transport a standard datasource from sap to biw?

Similar Messages

Maybe you are looking for