How to transport a TVARV variant?

Hi experts,
I would like to know, if I have a TVARV variant in the development system, how can I transport it? Is it possible, or I need to recreate the TVARV variant in the productive system also? What is the most common method, to handle this issue?

Hi,
In version 46C , you can create a transport request in SE38 for the variants of a program. You could then use transaction SCC1 to copy those changes from one client to another.
To create transport:
1) Go to transaction SE38 and enter the program name.
2) Click the radio button next to the "Variants" subobject and click the "Change" button
3) On "ABAP: Variants" screen, select menu path "Utilities -> Transport request"
4) Enter the variant(s) you want to copy into the "Variant name" box.
5) Click the execute button and save the data to a new change request.
Regards,
Khushbu.

Similar Messages

How to transport a transaction variant and her related screen variant?

Hello to every SDN member,
I am looking to transport a transaction variant and the related screen variants.
I read the help and I am concerned by the paragraph about the Client-specific transaction variants because when I created the transaction variant, no dialog box appeared.
In the paragraph about the Client-specific transaction variants, it is told to transport the variants with the Transport function but the problem is that I cannot find it. How can I use this function? It is not in the toolbar and not in the differents menus.
Can you please give me the solution to transport the transaction variant and the screen variant?
Thank you very much in advance.
Best regards,
Matthieu Chérier

Hi,
You can transport a variant by :
1. Running the program RSTRANSP. Mention your program and variant name there.
2.Create a variant with prefix 'CUS&'. This type of variants will be automatically transported to target system through transport request.
3.Go to Se38 --> Input report name --> Select Variants
On the screen --> Go to Utilities -> Select transport request
--> Provide the program name and Variant --> Assign Transport request to variant. Then release the transport.
Regards.

How to transport a Screen variant from one system to other

Hi All,
I created a screen variant in Dev. It was included in a transport request. But when I transported the request to Quality, The transaction is not behaving according to the screen variant. i.e. Screen variant has not got transported there.
Please help me out what can be done in this regard.
Thanks a lot.
Himanshu

Check the status of the request which u have transported, whether it includes the screen variant also.

How to transport BEX variants in BI?

Hi,
after the bw-upgrade we have problems with the transport of our variants created in BEX. In BW 3.1 we used saplsvar ( with report-id and variantname) to create a transport. But this doesn't work with BI. Does anyone know which parameter saplsvar need to create a transport in BI?- Or which other alternativ exists to transport a variant.
Thanx in advance.

Hi,
the new variants will be stored only in RSRVARIANT, but not in the VARID. In VARID are only the variants saved in 3.x version.
But how can I transport RSRVARIANT; its a SAP-table?
I'm looking for a program like RSTRANSP, because this program will not work with BI.
Detlef

How to transport Query variant used in APD

Hello Experts,
I have created 2 query variants for a query in Development system. And, these variants are being used in APD. Now, when APD is transported to next system, query variants does not exist in next system, so cannot execute APD.
Please let me know how can i transport the query variants.
Note: Gone through SDN, and found, query variants can be transported through some tables.
Please let me any other possibile sloutions for the same.
Thanks
Lavanya

Hi Lavanya,
To the best of my knowledge, you cannot transport query variants. You have to manually create them in each system. The reason being, when you try to create variants through RSRT -> Query Variants, you are basically trying to create variants for a temporary program generated during run time!
These run time programs do not have TADIR entries (not transportable) and hence any sub elements (like variants) created on these programs are not transportable as well.
Actually you can export variants.Please follow the below steps:
1. Go To TCode SE38.
2. Execute "RSTRANSP".
3. Input your program name.
4. Input your variant name ie. "Z**** ".
5. Execute.
6. Click on continue.
7. You should be able to create a new transport at this point.
Hope It Helps,
Thanks,
Amit Kr.

How to transport variants of queries

Hi all,
I'd like to know the way to transport report variants of queries.
Trying to execute queries, you can find a "Available Variants" field on the top of Variable Entry pages of report (query). With this feature, you can save the settings of variable that you enter and re-use the settings by using saved variants.
We make lots of variants and want to transport them. But I'm not sure how to transport them. (I tried to find those objects in Transport Connection window of RSA1, but I cannot find...)

Hi,
query variants are stored in table RSRVARIANT.
You should transport the table contents(via SE16 or SE10).
If you upgraded from 3.x, make sure you converted the variants by running report RSR_VARIANT_XPRA.

How to transport variable variants

Hi Gurus,
I want to transport the variable variants? how can i do that? in BI7 system.
Regards
Kiran Kumar Manku.

Hi,
Looks Funny, but i got the variants i have created in Dev to QAS. I thought of creating in QA but when i checked them, they already exists. Did u checked in RSRT , Query Variants after transporting the Query ?
In my case i have used the Variant in the APD's.
-Sonti-

KE28 - How to transport variant.?

I have created a couple of variants in KE28 , Need to know how to transport them.
RSTRANSP - doesnt seem to have the solution.
Thanks in advance.
Regards
Arvind.

Download and upload variants from PRD to DEV
Selection Variables / Name of the Variable in a Variant
Selection parameter values to be copied to Excel

How to transport variant?

hi,
can anyone tell how to transport variant?

Hi Rakhi Bose
you can create a transport request in SE38 for the variants of a program. You could then use transaction SCC1 to copy those changes from one client to another.
To create transport:
1) Go to transaction SE38 and enter the program name.
2) Click the radio button next to the "Variants" subobject and click the "Change" button
3) On "ABAP: Variants" screen, select menu path "Utilities -> Transport request"
4) Enter the variant(s) you want to copy into the "Variant name" box.
5) Click the execute button and save the data to a new change request.
To copy to new client:
1) Log on to target client and goto transaction SCC1.
2) Enter the source client and change request number from above.
3) Click the execute button.
Please note that if you're doing this in a downstream system (i.e. not a development box) you may need to change the client settings temporarily to carry out the client to client copy in SCC1.
Reward if helpful
Regards
Lakshman

How to transport display variants in alv

Hi,
Can any one please help me in transporting alv display variants?Actually I have transported the variants ,but only selection variants are getting transported.I want to transport ALV display variants accross the clients.
Please reply soon.It is very urgent.

Hi,
Please use the following :
First execute the report .
Then Menubar Settings> Layout> layout management>select your variant> menubar layout--> transport
This will work only when your variant management is activve in your ALV report.

Can we transport BW QUERY VARIANT (created in DEV) to QAS and PRD?

Hi gurus,
I created a lot of QUERY VARIANT ( parameters saved when we execute queries ) in BW DEV.
I am using those variants in my Analisys Process Designer and i do not want to create again in QAS and PRD.
Somebody knows how to transport those variants?
Is possible to assign by SE03? What is the code that object?
Thanks for any Help!!!
Carlos Eduardo Olinto

I transported my Query Variants.
- Variants must be created in DEV
- Download the records from:
> tables
RSRVARIANT
RSRVARIANTDIR
RSRVARIANTTXT
> Filter Field: VARI = "Query Variants Code"
- Create request in DEV
- Assign R3TR TABU <Table name>
Tables:
RSRVARIANT
RSRVARIANTDIR
RSRVARIANTTXT
- Save the contents in each table (Only KEY FIELDS)
- Verify the Lenght in each field, it must be correct (no spaces for each Field)
I hope it helps you!
Carlos Eduardo

How to transport an ABAP Program

I have an ABAP Program Z_CSFILE_SYSTEMCMD which I want to put in a transport request. Jeevan and I could not figure out how to do that.
Also this ABAP program uses two program variants:
XCS_PARM_CLEAN and XCS_PARM_PREP
If they are not automatically included with ABAP Program transport, how to transport the?
Thanks a lot,

Hi
you can transport the existing program through version management
Step 1
go to se38. give the program name Z_CSFILE_SYSTEMCMD press change.
Step 2
Change the program by introdusing space in the program(make sure the program is not effected)
Step3
after do so save the program . go to utilities on the top of the menu --- version management .
now after saving you can see Modified version there . again go back and activate the program.
Step4
after activating the program go to utilities on the top of the menu --- version management .
now you can see the the active version of the program and below that you can see the versions (eg version 1, 2 , 3 and so on with the request been genrated next to it)
Step 5
Copy the request for example BD1K900578
Step6
go to SE09 create a request (F6) give the name of the request name (create a work bench request)
Step7
once the a new request created.
go to SE09 and and give the user name and display. you will get a new screen where no objects are added.
Step8
Place the curser on the new request name -> include CNTRL+F11->Paste the request name BD1K900578 (Object list from the request) and press enter.
Step9
Refresh it now you can find program Z_CSFILE_SYSTEMCMD included in the request.
Step10
Relese the request and import the same to Quality.
Follow the same procedure for the rest of the varients XCS_PARM_CLEAN and XCS_PARM_PREP or varients can be created in their respective Servers
hope this helps
santosh
Edited by: Santhosh Nagaraj on Oct 29, 2009 12:41 AM

Transport a display variant ( screen variant )

Hi,
I have copied a standard display variant (screen variant to choose the fields on output) to Z variant with some more fields added into it.
I need to tranport this Zvariant to the production system
Can any one help to how do i insert this variant into the tranport.
thanks
Sandhya

the program RSTRANSP is to be run for transportin variants.
plz chk this link:
Re: Transporting Screen variants

How to set up Dynamic Variants for job which is based on Pay Period

Hi,
We need to set up dynamic variant for payroll interface. This interface is based on Pay periods and that is why we need to use different variant for each month. Letus know how to set up dynamic variant which will take care of Pay Periods

Hi, Thnx for reply.
We are not changing the control records, current period will be some old period in system.
payroll is not processed in SAP,

How to transport a deleted query?

I have deleted one query in developmeny system. I thought it will ask for tranport request.But it did not ask for any transport requast.Now it is deleted from development system.Please let me know how to transport this change in production?

Hi Saikat,
Was this query transported to the prod system, or created directlyin prod? If you have transported the query, you would not be able to delete without first assigning a transport request to the BEx dev class...check if there is any request assigned to the BEx dev class (RSA1 > transport connection)
Hope this helps...

How to transport a TVARV variant?

Similar Messages

Maybe you are looking for