How to transport an existing infopackage from dev to quality?

Can anyone pls give me the steps for transporting an existing infopackage from dev to qual?
I am not finding any infopackage in RSA - TRANSPORT CONNECTION
Points guranteed.

Here is the steps:
1. rsa1->transport connection
2. left panel choose 'object type', middle panel choose 'infopackage' and 'select objects'. Do a search here with your IP technical name.
3. then choose your IP and 'transfer'
4. will go to right panel, choose collection mode 'manual' and grouping only 'necessary objects'
5. after objects collection finished, create request. Repeat the same steps with grouping 'in dataflow before'
6. If they are $TMP, then change the package.
7. When you click the Save on the change package, it will prompt for transport. Here you can provide an existing open transport request number, or if you like here itself you can create a new one.
8. You can check the request in SE09 to confirm.
9. If everything is ok, release your request and ask your basis/security guy to move to QA.
Also you can open your InfoPackage and click on the truck symbol directly from IP window.
Hope it helps..

Similar Messages

How to transport an LSMW object from dev to Quality and to Production?

hi All,
Could any one please specify how to transport the lSMW object from developmen to Quality and finally to Production?
Thanks in Advance.
Regards.
Abhilash.

Hi,
The "cleaner" way is using normal transport procedure via "Extras->Generate Change Request".
This will transport the entire project though, not possible to transport a single object this way.
step by step
1. Run Tcode LSMW in source system.
2. in the menu bar choose Extras-->Export. Now give the filename and save in your desktop.
3. Now login to destination system. again execute LSMW.
4. Now goto Extras-->Import.Give your file which was downloaded earlier.
5. Now tool bar click on import with diffrent name option and give your new project and subprojectname.
6. Now execute all steps.
Also refer the below link
http://help.sap.com/saphelp_crm50/helpdata/en/da/a22506a3291b418b759524b278dcde/content.htm
Please reward points if it helps
Thanks
Vikranth

How to transport the distribution model from devlopment to quality in idocs

Hi ,
I am developing settings for idocs for the basic idoc type 'MATMAS03'.
By using SM59 , I gave the connections of two logical systems.
I created the distribution model by using BD64. when I generate the partner profiles , automatically, port and partner profiles are created.
How to transport from DEV to QUALITY of RFC connections, Distribution model and automatically generate partner profils and port ?
Plz give me the answer in broad way
Regards
NTR

hi,
Refer to this link...
how to transport distribution model

Error while exporting/transporting the Business system from Dev to Quality

Hi,
We are getting the following error whil exporting/trsnporting the Business system from development(SLD) env to quality(SLD) environment. The error is
404 Not Found
The requested resource does not exist.
Details: Go to main page of this application!
We have followed the following procedure to export :
1. opened the business system.
2. Clicked on export option
3. tried to download
then we got the above error message.
Please provide your precious inputs to resove our problem.
Thanks
Ramesh

Go through the following links for transporting XI objects.
https://service.sap.com/~sapdownload/011000358700001684302005E/HowToSLDandXI.pdf
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/0fa2c490-0201-0010-61b4-df12869c4753
ere's a good link for what you are looking.
Re: Transport design and configuration objects
Here are some blogs.
/people/sravya.talanki2/blog/2005/11/02/overview-of-transition-from-dev-to-qa-in-xi
/people/sap.india5/blog/2005/11/03/xi-software-logistics-1-sld-preparation
Pls reward if useful

How to transport the modified Query from DEV to QA

Hi BW users,
I have made few changes for existing query and transported to QA and the changes are reflecting in QA .But did n't transported to Production .and Now I have to added one more InfoObject.
Now Can I add that Info Object in QA it self or Do I need to add the New Info Object in DEV and Transport it to QA again.
Please let me know as it is very urgent to me.
Thanks in Advance
Sanjay M

Hi Sanjay,
Any changes you should to in DEV only. Do changes in DEV and move transport to Quality and subsequently to Production.

Transporting an ABAP query from DEV to QAS/PRD

Hi all,
I am trying to modify an existing query in DEV and move it to QAS and then to PRD. After making the changes in DEV, there was new transport request created, in which I had the changes for the query and in se93, i changed the name of the prog to the newly generated prog. after moving the transport to QAS, it is giving me a dump saying that the new prog generated in dev does not exist in QAS and hence the tcode does not work.
after that i tried with the standard SAP report "rsaqr3tr" and tried to make another transport assuming that the program would be together with the transaction and will be transported together. But this does not work.
I need help regarding this please - since it is an urgent rek - how do i transport the query after making changes to the already existing one - from DEV to QAS or PRD?
Please explain in detail where and what I am missing.
Thanks!
Related answers are appreciated and rewarded.

Hi Shyam.
I would like to suggest a few references,
[SDN - References for Query related to transport request|Query Related to Transport Request;
[SDN - Reference for Transport Management System (TMS)|Transport Management System (TMS) of R/3;
[SDN - Reference for Transport Request Problem|Transport reruest problem............;
[SDN - Reference for Transport request Query|Query Transport;
Hope that's usefull.
Good Luck & Regards.
Harsh Dave

Aggregation level transportation from dev to quality

Hi,
I have 2 aggregation levels in my mutiprovider. How can I transport these 2 aggregation levels from dev to Quality systems?

Hi,
you can collect the aggregation levels in transport connection (transaction rsa1 --> transport connection). There is a folder "Planning" and a type "Aggregation Level" (technical name: ALVL). Just select your aggregation levels and add them to a request. Please be aware that depending objects such as the multiprovider have to be transported to your quality system at same time if they are not already existing over there.
Brgds,
Marcel

Transporting a routine from dev to Quality

Hi Frnds,
I have transported a transformation from Dev to Quality. After that i got a requirement, so that i have written routine for a infoobject in Dev. Now i want to transport only that routine to quality.
Here in transport connection i am not able to find out the routine bcoz this transformation having more than 20 routines.Here in transport connection routines are with technical names.
How can I find out my routine technical name?
Or Is there any other way that i can transport this routine only into quality?
Regards,
Sridhar

Hi Sridhar,
Surely you can collect everything and transport it will not impact anything existing. Only if you have made some changes to the transformations in development that are not in quality, will be moved to quality.
Simple way to collect small objects is go to the change mode of the transformation it will ask you for transport request. Give the request number and it is ready for import in quality.
Hope this helps.
Regards,
Viren

Transport Questions and Questionnaires from Dev to QAS or to PRD

Question
How do we transport questions and questionnaires from dev to QAS or to PRD. Do you type all them again or there is process no. What is best process others do
Answer
As you must be aware, Questionnaires are updated from a Recruiter start page in the front end which cannot be saved in a change request.
At least Iu2019m not aware of any other way to move the Questionnaire details across clients.
I know that it is quite a bit of a task to repeat the activity of maintaining questions and response in questionnaire/s across clients, particularly When you have to maintain big questionnaires (with lots of questions & multiple responses).But As it is , Process templates, Questionnaires have been considered as a recruiters day-to-day administration task in SAP which has to be done from the front end even in live environment
Any body has soloution ?
Thanks.
Saquib
http://aspirehr.com/HCM_solutions/hcm_solutions.asp

Hi Vishal,
As you must be aware, Questionaires are updated from a Recruiter start page in the front end which cannot be saved in a change request.
Atleast i'm not aware of any other way to move the Questionnnaire details across clients.
i know that it is quite a bit of a task to repeat the activity of maintaining questions and response in questionnaire/s across clients, particularly When you have to maintain big questionnaires (with lots of questions & multiple responses).But As it is , Process templates, Questionnnaires have been considered as a recruiters day-to-day administration task in SAP which has to be done from the front end even in live environment.
So if you are a part of the Implementation Consulting team, it is your responsibility to train the core team in doing the activity in live environment. Hope this information helps.
Best regards
G Raj

How to transport the webdynpro applications from development production

Hi Experts,
We are implementing the first time NWDI for development.
As per my knowledge . There will only NWDI available for the whole landscape to manage and track the information.
NWDI will only one for the whole landscape?
How do we need to transport the ;build application from the dev sytem to production through NWDI.?
How the transport life cycle will be managed with NWDI and with out using NWDI?
As of my knowledge . we need to specify the production or testing mechine information in the NWDI to transport the build file from deve to -> testing to -> production.
Because my clients not allowing to specify the the production system information in nwdi to transport from dev to prodution using nwdi?
what is the other solution available?
By giving the production information in NWDI will give any problems futher?(like security).
Regards
Vijay

HI,
NWDI is Simply used to manage life cycle.
A developer will develope application. that time he needs to create an activity.
1. when activity is checked in & activated -> code is sent to DTR in development space, and CBS builds that code and its .sda or .ear file is deplopyed on development server.
2. same when you release it -> code is sent to DTR in Consolidation space and CBS builds and deploy it on consolidation server.
3. after that you can assemble you whole development in single file i.e. .sca file, and its get deployed on test server.
simple..
and if your client dont want to specify production system in NWDI., then when you assemble an .SCA file of your development, just copy it from CMS folder of your NWDI installed drive. and send it to your client..
he will externally deploy it on production

How do I copy existing songs from Computer Hard Drive to IPOD 30GB

How do I copy existing songs from Computer Hard Drive to IPOD 30GB? I am slightly learning disabled and have been unable to figure out how to add and or update. Thnaks

If the songs are in iTunes and the iPod is set to sync automatically, the songs should already be on the iPod; if they aren't, follow the instructions in this article and post back with any error messages.
If the iPod is set to sync manually, drag the songs onto the iPod in the iTunes source list.
(21058)

Unable to transport Integratin Builder objects from Dev to QA correctly

Hi,
System : Pi 711 SPS03
SLD 7.1 with latest model and content
We are trying to transport Integration Builder Objects from Dev to QAS, but the SID translation from DEV to QAS is not working.
The interface is being imported as the source SID.
We checked the SLD configuration for Transport targets, that is when we realised the below issue.
Unable to Assign Business Systems in respective Business System Groups
The expected configuration of the SLD is as below:
UKD_400 - Integration Server for Dev PI 711 server
INTEGRATION_SERVER_UKQ - Integration Server for QAS PI 711 server
XI_QA - Business System Group for all Quality Systems in the landscape
          1) UKD_400
          2) UC1_ECC_60
          3) UED_400
XI_DEV - Business System Group for all Developement Systems in the landscape
          1) INTEGRATION_SERVER_UKQ
          2) UC2_400
          3) UEQ_400
We are unable to put the business systems in their respective groups
All the Business systems are either being assigned in XI_QA or XI_DEV
Please let us know if this is a product error in SLD 7.1, could not find any relevant notes
Thanks,
Govind
Edited by: Govind Prathi on Feb 12, 2010 10:25 PM
Edited by: Govind Prathi on Feb 12, 2010 10:27 PM

We have already assinged the Integration server to their respective business system groups while creating the Business system groups.
   BSG: XI_DEV --> UKD_400( Integration Server DEV )
BSG : XI_QA ---> INTEGRATION_SERVER_UKQ( Integration Server QA)
As per documentation, the business systems should be automatically assigned to their respective Groups based on their association with Integration Server.
But, we are not seeing this behaviour, both the Integration servers are being assigned to the same Business System Group.
Please help me understand if i am something in the configurations.
Thanks
Govind

Process chain transport in BI7.0 from DEV system to PROD system

Hi experts,
I have to create a process chain of master data loading, and i have created the process chain in DEV system, now i want the same in the production system, can you please suggest me which way i do
1) create the same process chain in Production system directly or,
2) should i transport the same process chain to production system, i created in the development system.
and please tell me that what kind of problems in future i will face by following the above steps when the project will be in support state.
thanks in advance for all your expertise experienced help.

It is always advisable to transport the process chain from DEV to Production. You can just do this by simply gather all the necessary objects for process chain into your transport.
During the support phase, you have to monitor the data load through process chain. That can be done via transaction code rspcm. In case there is any error in the process chain ( various errors can be there, data loading error, delta error). In that case you have to go to the step of the process chain when the error occurs (it will be marked as red) , rectify the error and process the step manually at the point so that the following process finishes.
Hope this is clear now.

How to transport wdj project code from one server to other server?

Hi, experts,
I development 100 wdj component and deployed them to development server(A_development_server).
I have download sca file of my WDJ project from A_development_server.
I have config the SLD and Track in the other development server(B_development_server).
I don't know how to transport the project code from A_development_server to B_development_server for download the project code ?
Do you give me some hint?
Best regards,
tao
Edited by: wang tao on Mar 12, 2010 4:41 AM

Hi Wang,
You can directly deploy project from A_development_server to B_development_server. For that you need to Define Runtime details under RUNTIME tab in landscape configurator for B_development_server in CMS. To access CMS, go through http://host:port/devinf
Automated Deployment into Multiple Production Systems
http://help.sap.com/erp2005_ehp_04/helpdata/EN/44/355093ba830a67e10000000a422035/frameset.htm
Getting Started with the Development Infrastructure
http://help.sap.com/erp2005_ehp_04/helpdata/EN/44/0d18d725301a78e10000000a1553f6/content.htm
Hopt it helps
Regards,
Arun

Transport Table with Data from Development to Quality

Hi
Requirement:
Transporting Table with Values from Development to Quality System.
I have a Z* - table, appended one field at the end.
I need to transport data along with the table structure from Development System to Quality System.
In Development System, I have assigned the Transport request in Client 100(We can't add data to the table in this client).
What needs to be done to migrate the new table structure with Values.
Thanks in Advance
Regards,
Baburaj
NOTE: the requirement is to transport table and table entries through a transport request.
There should not be any manual update for the table in the target System (Quality System).

Check the delivery class assigned to the table. Please see the documentation
Delivery class
    The delivery class controls the transport of table data when installing
    or upgrading, in a client copy and when transporting between customer
    systems. The delivery class is also used in the extended table
    maintenance.
    There are the following delivery classes:
    o   A: Application table (master and transaction data).
    o   C: Customer table, data is maintained by the customer only.
    o   L: Table for storing temporary data.
    o   G: Customer table, SAP may insert new data records, but may not
        overwrite or delete existing data records. The customer namespace
        must be defined in table TRESC. (Use Report RDDKOR54 here).
    o   E: System table with its own namespaces for customer entries. The
customer namespace must be defined in table TRESC. (Use Report
RDDKOR54 here.)
S: System table, data changes have the same status as program
changes.
W: System table (e.g. table of the development environment) whose
data is transported with its own transport objects (e.g. R3TR PROG,
R3TR TABL, etc.).
or during client copy
the data of client-specific tables is copied.
Classes C, G, E, S: The data records of the table are copied to the
target client.
Classes W, L: The data records of the table are not copied to the
target client.
Class A: Data records are only copied to the target client if
explicitly requested (parameter option). Normally it does not make
sense to transport such data, but is supported to permit you to copy
an entire client environment.
or during installation, upgrade and language import
behavior differs here for client-specific and cross-client tables.
nt-specific tables
Classes A and C: Data is only imported into client 000. Existing
data records are overwritten.
Classes E, S and W: Data is imported into all clients. Existing data
records are overwritten.
Class G: Existing data records are overwritten in client 000. In all
other clients, new data records are inserted, but existing data
records are not overwritten.
Class L: No data is imported.
Cross-client tables
o   Classes A, L and C: No data is imported.
o   Classes E, S, and W: Data is imported. Exisitng data records with
     the same key are overwritten.
o   Classe G: Data records that do not exist are inserted, but existing
     data records are not overwritten.
ehavior during transport between customer systems
Data records of tables of delivery class L are not imported into the
target system. Data records of tables of delivery classes A, C, E, G, S
and W are imported into the target system (this is done for the target
client specified in the transport for client-specific tables).
se of the delivery class in the extended table maintenance
The delivery class is also analyzed in the extended table maintenance
(SM30). The maintenance interface generated for a table makes the
following checks:
o   You cannot transport the entered data with the transport link of the
    generated maintenance interface for tables of delivery classes W and
    L.
o   When you enter data, there is a check if this data violates the
    namespace defined for the table in table TRESC. If the data violates
    the namespace, the input is rejected.
Thanks,

How to transport an existing infopackage from dev to quality?

Similar Messages

Maybe you are looking for