How to transport BO report from Dev to Qas

Dear all,
We have three clients for BO, Dev,Qas and Prd. When we transport the BO reports from Dev to Qas, the parameters in Universe and QAAWS won't be changed automatically,just keep the setting in Dev.
what can I do to change the setting automatically?
Best regards
Tianli

Hi,
you can ask basis to maintain logical system conversion settings .
However if you post the Query in BO forums you would get better response.
Regards,
Satya

Similar Messages

How to tranport XI config from DEV to QAS or PRD

Dear Sir,
We would like to know How to tranport XI config from DEV to QAS or PRD
Thank you and best regards,
Vimol

Hi,
Check some links on transporting Objects.
Transporting IR,ID Objects using File System
http://help.sap.com/saphelp_nw2004s/helpdata/en/93/a3a74046033913e10000000a155106/frameset.htm
http://help.sap.com/saphelp_nw2004s/helpdata/en/a8/5e56006c17e748a68bb3843ed5aab8/frameset.htm
How to handle SLD for Tranporting Dev to Quality ser
https://service.sap.com/~sapdownload/011000358700001684302005E/HowToSLDandXI.pdf
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/0fa2c490-0201-0010-61b4-df12869c4753
Transporting XI from DEV to QA
Transporting XI from DEV to QA
using CMS system. in XI
1. /people/sap.india5/blog/2005/11/03/xi-software-logistics-1-sld-preparation
2. /people/sap.india5/blog/2005/11/09/xi-software-logistics-ii-overview
3. /people/sap.india5/blog/2005/11/28/xi-software-logistics-solution-iii-cms
4. /people/sravya.talanki2/blog/2005/11/02/overview-of-transition-from-dev-to-qa-in-xi --> Overview of Transition from Dev to QA in XI
5. /people/sravya.talanki2/blog/2005/12/20/inconsistencies-while-transporting-rfc-objects-from-dev-to-qa-150-sp12
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/9e76e511-0d01-0010-5c9d-9f768d644808
http://help.sap.com/saphelp_nw2004s/helpdata/en/93/a3a74046033913e10000000a155106/content.htm --> Transporting XI Objects
http://help.sap.com/saphelp_nw04/helpdata/en/ef/a21e3e0987760be10000000a114084/content .htm --> Configuring Groups and Transport Targets
Look into this blog for how to export / improt IR and ID objects,
/people/sap.india5/blog/2005/11/09/xi-software-logistics-ii-overview
/people/sap.india5/blog/2005/11/03/xi-software-logistics-1-sld-preparation
Please go through these links which actualy show you how to configure CMS and also gives you all information regarding it.
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/43f5d790-0201-0010-2984-ff72d822b109
http://help.sap.com/saphelp_nw04/helpdata/en/de/a4214174abef23e10000000a155106/content.htm
/people/daniel.wirbser/blog/2005/10/27/tcsfilecreateexception--error-while-assembly-of-software-components-in-nwdi
http://help.sap.com/saphelp_nw04/helpdata/en/f6/719a2172f74b67b150612a7cd3b7df/content.htm
http://www.sap-hefte.de/download/dateien/964/074_lesesprobe.pdf
Here are some blogs.
/people/sravya.talanki2/blog/2005/11/02/overview-of-transition-from-dev-to-qa-in-xi
/people/sap.india5/blog/2005/11/03/xi-software-logistics-1-sld-preparation
Re: Moving project from Dev to QA
Error while exporting/transporting the Business system from Dev to Quality
Transporting the scenario frm Dev Server to PRD Server
transporting data from Dev to quality using CMS
Regards,
Phani
Reward points if Helpful

How to transport modified query from Dev to QA??

Hi All,
I have made a few changes to a query that has already been transported to QA from Dev. I have removed an Infoobject and introduced a new Infoobject and other such changes.
Now I would like to transport the "new version" of the same query from Dev to QA again so that all the new changes are reflected in QA environment as well.
What steps or procedures do I need to follow for this please?
Thanks for your time,
Regards,
Reddy

Reddy,
BW reporting objects (query / Workbook / WAS tempalte) change transport system is different than other BW development objects (Infoobjects, cubes, transfer/update rules etc..).
Before you start making changes to any Query objects (which are already transported before), first you need to assign the respective Request in the "Transport Connection" tab (click on the BEX with truck symbol icon) and assign your request with the package name.
hope this helps a little..
Good luck
Mavi

Transporting a role from DEV to QAS in a Workflow

Hi,
I assigned a Role as the possible agent for a std task in DEV. I transported from DEV to QAS, first the Role (where I see the Std. task to which it is assigned and the corresponding WF template in PFCG for the role) with a Customizing Req. and then transported the WFlow template & associated std.task with a WBench TReq.
The transport is successful without any errors.
But, when I see the agent assignment for the task in QAS, the role is gone. Also, When I see the role Maintenance PFCG for this role, I don't see any WFlow tasks in the Workflow tab.
I tried to trasport this sequence(first role and then the wflow & std. task associated with it) twice, but in vain.
Can somebody pl tell me what's going on with the transport of the roles(that should include the wflow tasks & templates).
Thanks in advance
venu

Mike,
Infact I did first time transport in the sequence of WB req and then Cust. Req. It didn't help and then I tried the other sequence too.
And Could you tell me how to look into the WF configuration of the system to see if it is set to transport the Roles?
Actually, i tried transporting 3 roles under one Cust. Tran.Req, but only one Role got transported correctly and the rest two have been failing.
Pl. tell me if I am doing it correctly...
thank you
venu

Transporting SDK's from DEV to QAS

Hi Experts,
I'd like to know if using promotion managment, I would be able to transport my sdk that are already deployed to to DEV server, or I'll have to deploy it on all servers using the designer?
I could only find the option to transport the report itself.
Best
Leandro

I don't know the answer to this but I wonder if the BI Platform is a better place to ask this question as that area covers LCM/Promotion Management...

How to transport process chains from dev to quality ?

I have developed few ip s ,dtp s , transf etc for few iobj. Few are available and few are not in Q. I know if all are available how to move a pc but in this case, what is the best approach to move all the respective objects related to that pc into Q.
I mean do i have to manually verify what is available in Q and then move the missing dtp,ip,tran etc first ...and then move the pc or..... I can just send the respective dtp,ip ,tran etc while transporting the PC. That is my doubt.
I have many objects (dtp,ip,trans)and almost 20 pc need to be moved to Q .Experts, Please suggest the best approach.
Thanks,

Thanks Jaya. Can you please tell me what do you mean by ...first the objects and the process chains need to be moved..... anyway we are moving the objects along with the process chains rite, ..do you mean if anyother obj is locking the obj which is needed for this pc .....for ex I have global_data and I have selected that chain and put necessary obj.
Its showing the chain after collecting the objects. Now do i have to change it to before and after and make the dispaly to list and then compare the obj from Q which are not existing .....and then check or uncheck the respective objects which are not existing and then transport it.
Can u pls tell me if I am doing right ?
Edited by: Daniel on Dec 12, 2011 10:10 AM
Edited by: Daniel on Dec 12, 2011 10:12 AM

Urgent:: How to transport customer exit from dev to test system?

Hi,
We have created a Customer exit in our development system in the $tmp package, and we want to transport it to our test system. Can you please tell us how to proceed on this. We are not able to change the package as our package is a development package and so does not start with Y or Z.
Best Regards,
Charu.

Your package is RSR right.. this is the package for the function group XRSR where in this user exit exists.
you need to have a separate development class either starting with Y or Z. If not, ask any developer or your sap basis team to create one for you. then you can assign this development class to your user exit.
To check this, go to SE38 - enter your program name ZXRSRU01, display, in the menu "goto", CHECK "object Directory entry", you should have this development class.
Hope this helps.
Shakeel.

Transport Software Component from DEV to QAS

Hi all
I have a swc dev system in PI 7.1 which I transported through CTS to qas successfully, but not visible the swc in the sld of qas, How I can leave the sld of qas consistent with dev?

First you have to add this SWC in SLD QAS.
You can do it synchronizing both SLD, like my answer above.
Help Link:
[How to Use CTS + to Transport Your SAP NetWeaver PI Objects|http://www.sdn.sap.com/irj/scn/shop?rid=/media/uuid/c09ba86f-9660-2b10-6990-aa232459770f|http://www.sdn.sap.com/irj/scn/shop?rid=/media/uuid/c09ba86f-9660-2b10-6990-aa232459770f]
Best Regards.
Bruno

Transporting an ABAP query from DEV to QAS/PRD

Hi all,
I am trying to modify an existing query in DEV and move it to QAS and then to PRD. After making the changes in DEV, there was new transport request created, in which I had the changes for the query and in se93, i changed the name of the prog to the newly generated prog. after moving the transport to QAS, it is giving me a dump saying that the new prog generated in dev does not exist in QAS and hence the tcode does not work.
after that i tried with the standard SAP report "rsaqr3tr" and tried to make another transport assuming that the program would be together with the transaction and will be transported together. But this does not work.
I need help regarding this please - since it is an urgent rek - how do i transport the query after making changes to the already existing one - from DEV to QAS or PRD?
Please explain in detail where and what I am missing.
Thanks!
Related answers are appreciated and rewarded.

Hi Shyam.
I would like to suggest a few references,
[SDN - References for Query related to transport request|Query Related to Transport Request;
[SDN - Reference for Transport Management System (TMS)|Transport Management System (TMS) of R/3;
[SDN - Reference for Transport Request Problem|Transport reruest problem............;
[SDN - Reference for Transport request Query|Query Transport;
Hope that's usefull.
Good Luck & Regards.
Harsh Dave

How to move a report from one account to another account

Dear all ,
How to move a reports from one account to another account.
These are reports sent automatically. Unfortunately, I do not know where to find them and how to export to another account.
Puru

Hi,
You can use the Transaction SCC1 to move the data from One Client to Another Client for a Client dependent table.
The data should be present in a Transport and you can import to Transport to any client using SCC1.
Contact the Basis team to know how to use SCC1.
Regards,
Aj

Error while transporting Data sources from DEV to Qual

System : SCM 5.0 (SP 8), BI 7.0 (SP 12)
1) We are trying to transport Data source objects from Development server to Quality server.
2) Data sources of Type R/3 and Web Service.
3) We are able to transport the objects from Dev.
4) Once we import the objects to Quality server, the objects are becoming into INACTIVE stage.
Please help... Thanx in advance..
Regards
Manoj

HI tanu,
could you let me know how you have solved this issue.
which object not active.
i am having the same issue now.
kris

Transport Questions and Questionnaires from Dev to QAS or to PRD

Question
How do we transport questions and questionnaires from dev to QAS or to PRD. Do you type all them again or there is process no. What is best process others do
Answer
As you must be aware, Questionnaires are updated from a Recruiter start page in the front end which cannot be saved in a change request.
At least Iu2019m not aware of any other way to move the Questionnaire details across clients.
I know that it is quite a bit of a task to repeat the activity of maintaining questions and response in questionnaire/s across clients, particularly When you have to maintain big questionnaires (with lots of questions & multiple responses).But As it is , Process templates, Questionnaires have been considered as a recruiters day-to-day administration task in SAP which has to be done from the front end even in live environment
Any body has soloution ?
Thanks.
Saquib
http://aspirehr.com/HCM_solutions/hcm_solutions.asp

Hi Vishal,
As you must be aware, Questionaires are updated from a Recruiter start page in the front end which cannot be saved in a change request.
Atleast i'm not aware of any other way to move the Questionnnaire details across clients.
i know that it is quite a bit of a task to repeat the activity of maintaining questions and response in questionnaire/s across clients, particularly When you have to maintain big questionnaires (with lots of questions & multiple responses).But As it is , Process templates, Questionnnaires have been considered as a recruiters day-to-day administration task in SAP which has to be done from the front end even in live environment.
So if you are a part of the Implementation Consulting team, it is your responsibility to train the core team in doing the activity in live environment. Hope this information helps.
Best regards
G Raj

Transporting SLD objects from DEV to PROD

Hi,
I need to move My SLD objects from DEV to PROD. There is no QA. Also SLD is not common across DEV and PROD.
Thanks!!
Regards,
Miten.

Hi,
How to handle SLD for Tranporting Dev to Quality ser
https://service.sap.com/~sapdownload/011000358700001684302005E/HowToSLDandXI.pdf
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/0fa2c490-0201-0010-61b4-df12869c4753
Transporting XI from DEV to QA
Transporting XI from DEV to QA
using CMS system. in XI
1. /people/sap.india5/blog/2005/11/03/xi-software-logistics-1-sld-preparation
2. /people/sap.india5/blog/2005/11/09/xi-software-logistics-ii-overview
3. /people/sap.india5/blog/2005/11/28/xi-software-logistics-solution-iii-cms
4. /people/sravya.talanki2/blog/2005/11/02/overview-of-transition-from-dev-to-qa-in-xi --> Overview of Transition from Dev to QA in XI
5. /people/sravya.talanki2/blog/2005/12/20/inconsistencies-while-transporting-rfc-objects-from-dev-to-qa-150-sp12
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/9e76e511-0d01-0010-5c9d-9f768d644808
http://help.sap.com/saphelp_nw2004s/helpdata/en/93/a3a74046033913e10000000a155106/content.htm --> Transporting XI Objects
http://help.sap.com/saphelp_nw04/helpdata/en/ef/a21e3e0987760be10000000a114084/content .htm --> Configuring Groups and Transport Targets
Look into this blog for how to export / improt IR and ID objects,
/people/sap.india5/blog/2005/11/09/xi-software-logistics-ii-overview
/people/sap.india5/blog/2005/11/03/xi-software-logistics-1-sld-preparation
Please go through these links which actualy show you how to configure CMS and also gives you all information regarding it.
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/43f5d790-0201-0010-2984-ff72d822b109
http://help.sap.com/saphelp_nw04/helpdata/en/de/a4214174abef23e10000000a155106/content.htm
/people/daniel.wirbser/blog/2005/10/27/tcsfilecreateexception--error-while-assembly-of-software-components-in-nwdi
http://help.sap.com/saphelp_nw04/helpdata/en/f6/719a2172f74b67b150612a7cd3b7df/content.htm
http://www.sap-hefte.de/download/dateien/964/074_lesesprobe.pdf
Here are some blogs.
/people/sravya.talanki2/blog/2005/11/02/overview-of-transition-from-dev-to-qa-in-xi
/people/sap.india5/blog/2005/11/03/xi-software-logistics-1-sld-preparation
Re: Moving project from Dev to QA
Error while exporting/transporting the Business system from Dev to Quality
Transporting the scenario frm Dev Server to PRD Server
transporting data from Dev to quality using CMS
Regards,
Phani
Reward points if Helpful

How to move PI objects in IR and ID from DEV to QAS

Hi experts,
         I am new to PI and with lot of research and help from you all experts I could successfully create a scenario from XML to CSV conversion. I created message interface, interface mapping objects etc.. in "Integration Repository" and conficguration scenario, sender and receiver communication channels etc. in "Integration directory". Everything is working fine in DEV and now I want to move all these to QAS. I went through some documents on SDN and it was talking about XI track and CTS and I am so new to all these, I am not sure how to get started. Could someone please let me know the procedure of moving PI objects from DEV to QAS?
Thanks.
--Mithun

Not to Worry Mithun Da!
There are two ways to transport ID and IR Object to transport .
1. CTS + : Totally automated Way .,
2. .tpz : Manual Lagacy Import / Import way .
Now . Steps .are :
There are two types of transport mechanisms in XI/PI.
1.      File Transport System.
Files are imported and exported into SAP XI OS Level for Development and Quality Server,
This Process is risky as there is no automated system and there is no track record of imported or Exported Files,
as in this syetem exported files are transported to QA System from DEV System.
file Extension in file transport System : - .tpz
2.     Through CTMS(Change Transport Managment System).
GUI Based tool, Installed on SAP XI BOX, This system provides the automated transport system , which keep tracks of transported Objects and Failed objects.
There are initial level efforts to set up transport system.
Transport Procedure for Various System :-
DESIGN OBJECTS ---> (ENTERPRISE SERVICE REPSITORY OBJECTS) -
> INTEGRATION BUILDER.
Step -I
1. Select NameSpace to trasport.
2. Right Click on NameSpace to Transport.
3. Select Export Option.
4. Check or Select the Software Component Version.
5. Check the Mode of transport.
CTS MOde:-
5.1     Select a required type of Object Set:
     IN OUR CASE: ALL OBJECT OF INDIVIDUAL NAMESPACE.
5.2        Select Transort request.
5.3      Finish the Process.
TRANSPORT USING FILE SYSTEM:-
5.1     Select a required type of Object Set:
     IN OUR CASE: ALL OBJECT OF INDIVIDUAL NAMESPACE.
5.2      Finish the Process.
Step II
1. GO TO TOOLS OPTION IN MENU BAR
2. OPEN CTS TRANSPORT ORGANIZER
3. Select the request to Release.
4. Press Button Release.
Step III( Steps to be Perform at Target System).
1. Execute Transection Code STMS.
2. Check your Transport Request Number.
3. Focus on that Trasport Request Number Through Mouse.
4. Now Import The Transport Request on Specific client of Target System.
5.Click Ok.
FINAL :- NOw on Quality Server all Transported Objects Need to be activated.
CONFIGURATION OBJECTS ---> (INTEGRATION DIRECTORY) -
> INTEGRATION BUILDER.
Step -I
1. Select Configuration Scenario to trasport.
2. Right Click on Configuration Scenario to Transport.
3. Select Export Option.
4. Check or Select the Configuration Scenario.
5. Check the Mode of transport.
CTS MOde:-
5.1     Select a required type of Object Set:
     IN OUR CASE: ALL OBJECT OF Selected Scenario.
5.2        Select Transort request.
5.3      Finish the Process.
TRANSPORT USING FILE SYSTEM:-
5.1     Select a required type of Object Set:
     IN OUR CASE: ALL OBJECT OF Selected Scenario.
5.2      Finish the Process.
Step II
1. GO TO TOOLS OPTION IN MENU BAR
2. OPEN CTS TRANSPORT ORGANIZER
3. Select the request to Release.
4. Press Button Release.
Step III( Steps to be Perform at Target System).
1. Execute Transection Code STMS.
2. Check your Transport Request Number.
3. Focus on that Trasport Request Number Through Mouse.
4. Now Import The Transport Request on Specific client of Target System.
5.Click Ok.
FINAL :- NOw on Quality Server all Transported Objects Need to be activated( CHANGE OBJECTS).

Transporting a routine from dev to Quality

Hi Frnds,
I have transported a transformation from Dev to Quality. After that i got a requirement, so that i have written routine for a infoobject in Dev. Now i want to transport only that routine to quality.
Here in transport connection i am not able to find out the routine bcoz this transformation having more than 20 routines.Here in transport connection routines are with technical names.
How can I find out my routine technical name?
Or Is there any other way that i can transport this routine only into quality?
Regards,
Sridhar

Hi Sridhar,
Surely you can collect everything and transport it will not impact anything existing. Only if you have made some changes to the transformations in development that are not in quality, will be moved to quality.
Simple way to collect small objects is go to the change mode of the transformation it will ask you for transport request. Give the request number and it is ready for import in quality.
Hope this helps.
Regards,
Viren

How to transport BO report from Dev to Qas

Similar Messages

Maybe you are looking for