How to transport changes done in dev system to quality system.

HI ALL,
Can any one give the procedure to transport the changes done to a parameter group in Dev syystem to Quality system through solution manager.
Thanks & Regards,
Virinchi.

Hi,
once you saved all objects in TRtransport requests then goto SE01 or SE09 or SE10 seelct u r TR .in the seleted TR release sub task of the TR thn the main one.
SE09 and transport connection
if you need some docs on transport
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/3010ba90-0201-0010-2896-e58547c6757e
http://help.sap.com/saphelp_nw2004s/helpdata/en/0b/5ee7377a98c17fe10000009b38f842/frameset.htm
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/e883de94-0501-0010-7d95-de5ffa503a86
http://help.sap.com/saphelp_nw2004s/helpdata/en/b5/1d733b73a8f706e10000000a11402f/frameset.htm
http://help.sap.com/saphelp_nw2004s/helpdata/en/57/38e1824eb711d182bf0000e829fbfe/frameset.htm
Re: Transport Organizer---
transport query (bex objects)
http://help.sap.com/saphelp_nw2004s/helpdata/en/38/5ee7377a98c17fe10000009b38f842/frameset.htm
hope this helps.
Note if u founds useful reward points
mahesh

Similar Messages

Transporting issue from Developement System to Quality System

Hello Experts,
We are facing a problem in which address details in developement system are getting displayed and when the same code is transported to the quality system then the address fields are not getting displayed.
While debugging we found out that there is a variable which is calling the view (responsible for displaying address fields) in the developement system but the same view is not called in the Quality System.
We tried all sorts of backtracking but could not find where the variable is getting the values from.
Kindly Guide.
Regards
Sanket Jain
Edited by: Jain Sanket on Mar 22, 2011 3:57 PM

Hi BW Star,
I am transporting a process chain for deleting ODS change log from dev system to quality system. It is working fine in the dev system, but when transported to quality system, its process variants becomes empty for all the included ods change log delete steps. object_type and object_name field in variant becomes empty.
Thanks for your help.
Regards,
Shankar

Transport system - develop-quality system

Hi,
we would like automate the transport from our change requests from develop-system to quality-system.
Does anyone know if there is a possibility where a user can release change requests without an automatically transport?
Can I define it in the transport route?
Thanks
Michael

HI
GOOD
go through this link, i hope this ll help you to solve your problem.
http://help.sap.com/saphelp_nw04/helpdata/en/90/972715cd8c11d2b41400609419f767/content.htm
thanks
mrutyun^

Issue whilel transporting from production system to quality system

Hi All,
    I am facing issue in process chain when I transport it from production system to quality system. Process chain is related to deleting PSA logs. When transported to quality system object_type and object_name fields in display variant becomes blank. In production system it is showing 8ZXXX_CA, it should become 8ZXXX_HA in quality system.
   Thanks for your help.
Regards,
Shankar

Hi,
    sorry it was frm dev system to quality system, not prod to quality.
Regards,
Shankar

How to Transport changes from Dev. to Quality and production

Hello Friends,
I've done the below changes in IR
1.Added idoc in Imported Idocs
2.Added new Interface Mapping
3.Added new Message Mapping
In ID:
Chagned Receiver Agreement
Changed Interface Agreement
Please let me know how i can move the changes to Quality and Production..
Pls. provide me the steps to create Transport and how to transfer.
Thanks in advance!!!
Best Regards
Prasad

Hi,
By using File system or cms you can transport, better to do the configuration steps manually to avoid ther errors.
We can do some changes to move
Moving Dev to QA changes
1.SLD: are there any changes we need to do.
If you have common SLD, then I doubt if you may need any changes on SLD side.
The Business systems you had used will be the same you may use in Q-Landscape.
2.IR: are there any changes we need to do.
---> No changes required, you need to export .tpz file from Development box and have to import it in Q-box
3.ID: do we need to recreate it fully or after importing,just change the Communication channels will
do.I am confused here.
You need to reconfigure all communication channels, if SLD changes are OK then business system will
change automatically and in communication channel just filled in correct IP/password etc.
---> Similar to IR, you can transport these objects also. But you may need to do related changes to communication channels, if you will be referring to different Sender systems and Receiver systems.
Then as mentioned in previous posts you may need to maintain those Business systems in SLD also.
4.RWB: such as alerts,and if there are any...
--> The Alerts will not be transported....you need to create it as new setup for every box.
Check this link
http://help.sap.com/saphelp_nw04/helpdata/en/09/88f339db9911d2b41a00609419f767/content.htm

How to Transport iViews from Portal Dev system to Prod system?

Hello friends,
This is an urgent request and it would be of great help if you can give me a solution to this.
We have a Development Portal and a Production Portal. There is no QAS Portal. We are on EP 5.0 and BW is 3.5. Coming to my question, I have created an iView on a Web Application Designer template and assigned it to a role on the Development Portal. The report displays well on the Portal. Now I want to move this newly created iView to Production Portal. I absolutely have no idea how to do this as it is generally a Portal person's work and I have been asked to do this as the Portal person is currently on leave. I need to move the iView to Production as quickly as possible and I would really appreciate if any of you can send me detailed steps on how to do this.
The best way to say thanks in SDN is to assign points to helpful answers and I will not forget that.
Thanks,
Deepthi.

Hi Deepthi,
observe these links:
Here is some material:
How to Transport Models Within SAP Analytics
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/035be5d4-0a01-0010-b48a-d4c8c9b020b5
Actually, those pieces are also included in my book "SAP NetWeaver Visual Composer" which is already available from SAP-Press ( http://www.sap-press.com/product.cfm?account=&product=H1932 )
If Usefull Asain the points.
Thanks,
kiran.
Message was edited by:
kiran manyam

How to transport modified query from Dev to QA??

Hi All,
I have made a few changes to a query that has already been transported to QA from Dev. I have removed an Infoobject and introduced a new Infoobject and other such changes.
Now I would like to transport the "new version" of the same query from Dev to QA again so that all the new changes are reflected in QA environment as well.
What steps or procedures do I need to follow for this please?
Thanks for your time,
Regards,
Reddy

Reddy,
BW reporting objects (query / Workbook / WAS tempalte) change transport system is different than other BW development objects (Infoobjects, cubes, transfer/update rules etc..).
Before you start making changes to any Query objects (which are already transported before), first you need to assign the respective Request in the "Transport Connection" tab (click on the BEX with truck symbol icon) and assign your request with the package name.
hope this helps a little..
Good luck
Mavi

How to track Changes done in planning book....by whom.....in DP planning

Hi All,
I want to track the changes done in Key figures in planning book ..........mostly by whom .......let me know how to track the same in APO DP planning book...........any std..........way..........like R/3...........pl reply.............your expert guidence will be appreciated..........by rewarding the same..............Thanks...........
Best Regards
Sharad

Hi,
You would be able to tackle this partially by adding a new hidden key figure.
Refer the example below;
Kfig1. Stat forecast: Calculated using stat forecasting
Kfig2. Adjusted forecast: user normally changes this
Kfig3. Hidden copy of Adjusted forecast:
Using macros copy 1st snap shot of stat forecast to Adjusted and Hidden. once adjustments are done, use Macro to compare Adjustments and Hidden copy of original values, or this can be a overnight batch job to generate alerts
Hope this helps.
Pradeep

I want to change my security questions (that I don't remember) but the recovery mail is misspelled wrong by the server (I can't get the email) how I can change done recovery mail without security questions?

So, yesterday I wanted to buy 2 albums but it was the first buy in this device (I reset mi iPad 2 months ago) so it asked me for my security questions to confirm my identity but since is been a long time since I "used" me security questions I don't remember it so, eventually, I asked for the email to change either my password or my security questions but the email has 2 misspelled letters by a server error instead of being hotmail.com is writted a*******@hormail.clm sop I can't get any email, I already tried changing the mail email and the secondary email but still is the same mail a*******@hormail.clm so how I can change this without my security questions?

Security questions:
https://discussions.apple.com/docs/DOC-4551
http://support.apple.com/kb/HT5312
This is also useful:
http://www.macworld.co.uk/ipad-iphone/news/?newsid=3463233&olo=email

How to transport changes made in SE36 - Dynamic Seletion for BRF

Hi Friends,
Please guide me how to transport or assign a request for the changes made in BRF selecion view.
I have assigned and added BKPF-XREF1_HD field for FB03 transaction. Its working fine as per user requirement.
I am facing probelm to assing a transport request for that. I didn't find any transport menu in se36.
So please provide me how to assign a TR which need to import into Production client.
If I have to assign or create a program (standard), then please provide me the program name.
Please reply.
Thanks & Regards
Sankar.
Edited by: sankar babu on Jul 29, 2010 12:26 PM

Solved

How to clear changes done in a popup.

Hi All,
I am facing a scenario where in a table for each row I am showing a link which opens up a popup showing xml payload attribute for that specific row.
That popup allows user to edit that popup and save the changes.
However, if user makes some changes in the popup and click cancel, the next time he again opens up that popup that previous changes are retained because they are available in entity cache.
The requirement is if the user re-opens the popup after some time, he should see the changes from the database and not from cache.
Any pointers on how to achieve this?
Thanks.

The thing I forgot to add is that on the pop up, there are two components. First one is input text that shows xml payload attribute for the row selected in the table ( for which we are opening the popup ) and the second is a submit button.
The submit button needs to be enabled only if there is a change in the content of input text field. So I have set autosubmit to true on input text field to enable submit button.
The submit button is enabled through a value change listener on the input text field.
Now in this scenario, I need to add a cancel button using which I need to clear the changes done by the user in the input text field.
The resetActionListener does not work in that case.
What approach should I follow to achieve this?

How to check changes done in close in period.

Hi
How to check the changes done for closeing period ( mmpv ).
Thanks
Prashant
Edited by: Prashant U. Maid on Dec 5, 2008 5:28 AM

Hi
You can check thru T.code MMRV the peroid status.If you need to see what are the changes and how has made the changes then go to T.code se11 and check the entries for the table MARV( Material Control Record ) for the desired company code.
Client
Company Code
Fiscal Year of Current Period
Current period (posting period)
Fiscal year of previous period
Month of previous period
Fiscal year of last period of previous year
Last month of previous year
Allow Posting to Previous Period (Backposting)
Indicator: Disallow backposting after a change of period
Name of Person Who Changed Object
Date of Last Change
Time
Indicator: Initialize company code
Fiscal year of period before last
Month of period before last
Fiscal year of last period of year before last
Last period of year before last
Fiscal year of 1st period with dynamic closing
1st period with dynamic closing
Fiscal Year of 1st Period After 4.6C Upgrade
1st Period After 4.6C Upgrade
Regards
suny

Transports from Dev System to Quality System, Objects copied in Local reque

Hi All,
I am doing transports from Dev Box to Quality Box, while collecting the objects , some required objects got collected in a local request(9xxxxxx) and some got collected in Work bench request(9yyyyyy), Now I want to add , the objects collected in the local request to the work bench request to have a single work bench request i.e 9yyyyyy for transport , with all the objects of the local request 9xxxxxx and already collected objects in work bench request 9yyyyyy,
Please provide the solution for the situation
Thanks in advance
suitable answers will be awarded
Prasad

Hi,
1.First see that your workbench request has a different target system than the ones pointed to by the development class/package of the objects you are trying to assign.
or,
The objects are not assigned to correct development class/package.
2. When we try to create a workbench request, we will see only the request and that is fine.
3.Now, release the local request containing your objects.
4.Include the local transport objects to the new workbench request (Ctrl + F11).
and release and transport the workbench request.
Pls assaign the points if it is useful.
Regards,
Raghavendra Rao.Kolli.

How can we change the SID of an existing SAP system.

Hi to all basis experts.
Is it possible to change the SID of an existing SAP system.
i am performing R3copy method and i want to change the SID of the tar

check these link
http://help.sap.com/saphelp_nwmobile71/helpdata/en/aa/1dc94af0fa11d3a6510000e835363f/content.htm
http://sap.ittoolbox.com/documents/changing-the-ltsidgtadm-password-17764

How can I change Siri's time to match the system time?

I'm trying to set an appointment with Siri for 10:00am tomorrow. She completes the task telling me "here is your appointment for 10:00am tomorrow", but the phone is showing that it is setting it for 2:00am. The time difference is exactly 8 hours. How can I change this so that they match?

Doesn't work for me. Tried all time zone settings (both in Date/Time and Calendar) to turn on and off, to set timezone 1 hour less - no result. Everytime I have appointment set 1 hour later than Siri recognizes.
I live in Moscow, Russia, and maybe the problem is that starting this year Russia doesn't switch to winter or summer time.
Any advice?

How to transport changes done in dev system to quality system.

Similar Messages

Maybe you are looking for