How to Transport Factory Calender to QTY and PRS systems

Hi All,
I had done a small change to Holiday calender in SCAL. I have read that it's not suggestive to transport it. Can any one let me know the procedure to transport the change to QTY and PRD systems.
The transport button is greyed out .
Best Regards,
Sri

The following OSS Notes have also been checked.
356483 : Customizing: Current settings in the test system.
077430 : Customizing: Current settings .
328916 : Cust Changes despite "System cannot be changed" setting
Can any one provide an input on the procedure to move a factory calender - Individual entry..
Thanks in advance
Sri

Similar Messages

  • How to extend factory calender to a plant ?

    Hi Ranga:
    How to extend factory calender to a plant ? ( Tcode: SCAL, The calender is not client specific)
    I check marked US factory calender, where after can you tell how to extend factory calender to plant
    Note: I am using IDES ( International Demonstration & Education System)
    Thanks

    Hi Sandeep,
    you need to use the following path
    Go to SPRO>ENTERPRISE STRUCTURE->DEFINITION> LOG GENERAL>DEFINE COPY,DELETE AND CHECK PLANT>DEFINE PLANT
    Here you need to assign the factory calendar. The assignment in work center will only applicable for capacity not for MRP and others.
    <b>For information how to create a factory calendar</b>
    Pl follow the steps
    1.Go to SCAL transaction
    2.there will be three options.
    Click first public holidays and go in change mode.
    Click create and create your holidays there and save.(Generally fixed date will be used in the pop up)
    3.Now click Holiday calendar and go in change mode.
    Click create and give holdiay cal id and description.
    Click assign public holiday and add your holidays one by one and save
    Now holiday cal is created.
    4.Now come out and choose fact calendar and go in change mode
    Click create and give Factory calendar id and description, and validity period.
    Give the holiday calendar ID.
    If you want to give special rule like any of the specific date/ day is the holiday or work day (which is different from holiday calendar you can define)
    and save.
    5.You have to assign factory calendar to PLANT
    Go to SPRO>ENTERPRISE STRUCTURE->DEFINITION> LOG GENERAL>DEFINE COPY,DELETE AND CHECK PLANT>DEFINE PLANT
    Choose your plant and go to details-
    You have to define factory calendar there
    Hope this will help you
    Regards
    Ranga

  • Urgent    how to change factory calender to normal calender  in bw report

    Hi
    how to change factory calender to normal calender  in bw report give me step by step
    prasanth.k

    Prasanth,
    the calenders are maintained in the source system and not in BW - if you have to change the calendar coming into BW - do the needful change for the related transaction in the source system.
    Arun

  • How to transport solution (in dswp)  in solution manager system

    how to transport solution (in dswp)  in solution manager system ??

    Hello,
    I don't think this is possible in DSWP.
    Please refer to this link for information related to change management.
    http://wiki.sdn.sap.com/wiki/display/SM/ChangeRequestManagement
    Regards,
    Paul

  • How to use factory calender in BPM (NWDS 7.1 environement )

    hi guys,
    I have requirement to send u201Cnotification of missed deadlineu201D using factory calendar.
    The time to send notification is in hours and its is less than a day. So a task created on Friday 5u2019o clock should send missed alert on Monday 9 AM (assuming business run from 9 to 5).
    this need to be achieve using BPM workflow can any suggest me how to use factory calendar in BPM .

    Hi,
    You can use "BUSINESS_DATE_CREATE" function module in the ECC system for your requirement.
    This will calculate exact date and time and return next business day.
    You need to some datetime convertions on the BPM side to get it working
    Regards, Anil

  • How to update Factory calender in CRM from ECC?

    Hi All,
    Factory calenders are downloaded to CRM from ECC, using adapter object DNL_CUST_CAL_C in Initial load (R3AS).  My doubt is, whenever a new holiday is added to Factory calender in ECC, how the particular added holiday will be downloaded to update the same in CRM system?
    Please help me.
    Regards,
    Maddy

    Hello Maddy,
    In my system download object DNL_CUST_CAL_C is for the download from the CRM (online) database to the old consolidated database (CDB, for the offline Mobile Sales scenario). You could see this in transaction R3AC3.
    For your scenario I don't know how to download. This thread here speaks of a manual adjustment in transaction SCAL.
    http://scn.sap.com/thread/274825
    Best regards,
    Thomas Wagner

  • How to transport Factory calendar to Production

    Hello PP Gurus !,
    I have a question regarding transporting factory calendar to production system . Is there  any specific way of moving the transport request from development to production ? or it is as usual like other config transportation ?
    I was told that there is a special procedure to transport factory calendar . Please throw me some light on this .
    Regards,
    Giri

    Jiaul,
    First of all, I only need to transport this configuration from DEV Client 301 to QA.
    Referring to another SDN note, our Basis Team has changed the Client Role to Customizing, and make the system changable and client independent. Now, the "Transport" function is enabled.
    We finally able to transport the Factory Calendar. But when we click on the "Transport", it warned us that "All public holidays, public holiday and factory calendars will be transported.All public holidays, public holiday and factory calendars will first be deleted in the target system."
    Like Xioliu mentioned in the same message: "this kind of transport is a table transport, that is , if you use it, all table entries in the target system will be overwritten from the source client.
    this is not a SAP recommended transport."
    I feel that this is a high risk if we transport the whole table.
    Is that a way that we can just transport the two Factory Calendar entries we added (without manually re-create in the system.). The purpose is that we need a TR # generated, so that we can transport to Production with proper transport log.
    Thanks for advise.
    Kent

  • How to transport standard text in SO10 to different system.

    Hi,
    I need to change the standard text in SO10. I need to change the custom text. We have a custom text id (zval) associated with it. How to transport the changes i have done from Dev to Quality to Production.
    I wanted one clarification: when we create the transport manually, whether only those changes what i have done for the text can be transported or it will include all the other text which are initially present (like table entries). From the program RSTXTRAN, can you give the what are the inputs need to given.
    Please let me know regarding this. Thanks in advance

    Steps..
    Create a work bench CR in the transaction SE09..
    Modify the task to Development correction / Repair..
    Go to the program RSTXTRAN..
    In the name of correction give the task number (Not the CR number)
    Give the Text Key..Your standard text name..
    Press F8...
    Press select all..
    Then Press enter..
    Then press the button "Trsfr texts to corr".
    Now the standard texts will be moved to a CR..
    Then release the CR and move it to QA..

  • How to transport Custom Characteristics in consolidation to other system?

    Hello,
    For consolidation purposes i was creating new characteristic for table ECMCT with T.CODE CX0A1.
    I was genereting the changes i have made, but transport was not created.
    Can someone tell me how to transport custom characteristic?
    Best regards,
    Avishai

    Hi Eli,
    The characteristics can not be transported with this one.
    Our problem comes from table MCDX.
    The content for object dependency is not the same in Development and quality system and I can't find how to update it.

  • How to transport the DATABASE TABLE  into  the Test system ?

    Hi Experts,
    I am working on BI7,  I had created Database table in BDV system using SE11. Tech_name is ZGLACC_TEMP. I had activated it. I had used this database table for the purpose of  writing the start routine in the transformation. while I am transporting the transformations to the test system, It is showing as syntax error in ABAP program,
    In BDV system there are no syntax errors. it is working fine,
    So now I have to transport the database table to test system  so that I can transport the transformations into Test system without any error.
    Kindly anyone can give the answer , it will be appreciate and points will be assigned.
    thanks
    sekhar

    Hi Sekhar,
       Go to SE11, go into the change mode of your table and change the Object Directory entry (Goto -> Object Directory Entry) to some valid package (other than $tmp). Then it will ask for a transport request. Give a transport request and then I believe you know what to do with that transport.
       Another thing to keep in mind ... transport all the data elements and domains you have created for this table. Change their Object Directory Entry and assign them to the same transport request.
    Best regards,
    Kazmi

  • How to transport a package(dev class) to another system?

    dear gurus,
    is it possible to transport a package (development class) from one system to anther system mannully? there is no transport path between the two systems.
    best regards.
    Jun

    Hello Jun
    The "correct" way would be to create a transport request of type Relocation of Complete Package (SE10):
    DE ORDER_MVE
    Short Text
         Select relocation of a complete package
    Definition
         Relocations of complete packages are transports with which you
         simultaneously
         o   move the original location of all objects in a package to the target
             system and
         o   simultaneously assign the package to another transport layer.
    Use
         Changing the transport layer means that you can edit and transport the
         objects consistently in their new original location without delay.
    However, I assume that this is not possible in your system landscape. In this case you can download the transport files using transaction CG3Y (if available => download as BIN not ASC) yourself. A transport request E01K900100 consists of two files (data and log file), e.g.:
    /usr/sap/trans/data/R900100.E01
    /usr/sap/trans/cofiles/K900100.E01
    Please note that the transport directory is likely to be different on your SAP system (check for directory DIR_TRANS in AL11 or ask your basis colleagues).
    Now on your target system you either upload the files into the corresponding transport directories using CG3Z (if available) or ask your basis people to put the files into the directories. Either your basis is importing the request or you can use transaction STMS (Import queue <target system>, menu Extras -> Other Requests -> Add).
    Add the request to the import queue and import it.
    Finally you need to change the original system of the transported object and the transport layer of the package:
    1) SE03 -> Change Object Directory Entries of Objects in Request
    2) SE80 -> Package in Change Modus: maintain transport layer
    Regards
      Uwe

  • How to add factory calender in ABAP Selection Screen?

    Hi,
    Anyone can guide me, how to add the factory or Holiday calender in ABAP Selection screen?
    Thanks in advance.
    VJ.

    Use the below code and it should work.
    AT SELECTION-SCREEN on VALUE-REQUEST FOR p_date. "p_date is your selection screen field.
       CALL FUNCTION 'F4_DATE'
        EXPORTING
          DATE_FOR_FIRST_MONTH               = SY-DATUM
          DISPLAY                                           = ' '
          FACTORY_CALENDAR_ID                = 'US'
          HOLIDAY_CALENDAR_ID                = 'US'
        IMPORTING
          SELECT_DATE                        = p_date
    The thing to note above is DISPLAY should NOT be 'X'.

  • How to transport contents of maintenace  view to one system to another?

    Hi Gurus,
    I have a  urgent need of transporting table contents(through maintenance  view )
    from DEV to QA and  then to PRD. How we can do it using  the transport button in SM30?
    Your appropriate help will be reqarded with points
    -B S B

    Hi,
    Look at the below link
    http://searchsap.techtarget.com/tip/0,289483,sid21_gci1240876,00.html
    Regards
    Sudheer

  • Urgent:: How to transport customer exit from dev to test system?

    Hi,
    We have created a Customer exit in our development system in the $tmp package, and we want to transport it to our test system. Can you please tell us how to proceed on this. We are not able to change the package as our package is a development package and so does not start with Y or Z.
    Best Regards,
    Charu.

    Your package is RSR right.. this is the package for the function group XRSR where in this user exit exists.
    you need to have a separate development class either starting with Y or Z. If not, ask any developer or your sap basis team to create one for you. then you can assign this development class to your user exit.
    To check this, go to SE38 - enter your program name ZXRSRU01, display, in the menu "goto", CHECK "object Directory entry", you should have this development class.
    Hope this helps.
    Shakeel.

  • Factory calender transport

    How to transport factory calender to PRD system from DEV.

    Hi,
    Go to SCAL transaction
    Choose the function Calendar -> Transport, in the holiday and factory calendar initial screen to copy all the holiday and factory calendar data into a request.
    Please pay attention to the information which you get when transporting the holiday and factory calendar
    Transporting of Factory Calendar:
    u2022 Changes to calendar data are not automatically included in a correction request.
    Note: You cannot transport individual public holidays or calendars. You can only transport calendar data in its entirety. When you do this, all public holidays, public holiday and factory calendars existing in the target system are deleted.
    u2022 All changes made to the holiday or factory calendar must be transported manually. The holiday and factory calendars' own transport connection should be used.
    Hope it helps

Maybe you are looking for