How to transport FM retraction configuration if source-system changes?

Hi experts,
I have configured FM retraction in ERP through SPRO connecting it to my Dev source system in my Dev ERP. What do I need to do to transport this configuration to my production ERP and make sure the BI source-system changes from Dev to Prod as well? Is there some kind of souce-system mapping as there is in the BI side for the extraction?
For example, I have everything set-up for source-system BWD and I want it to change to BWP when I transport the configuration from ERP dev to ERP prod.
Thanks
Edited by: Pedro Fontes Pais on Dec 2, 2008 6:36 PM

Hi Christian,
Thanks for your reply, but I didn't get anywhere in OKE7 & OKE8 to include the credit records I made in KSAZ in a Transport.
Can you elaborate it more.
Thanks
Amit Goyal

Similar Messages

How to transport Application Component Hierarchy of source system

Hi,
Our BW pulls data from CRM.
In CRM Development, all content/generic datasources are placed under specific nodes in Application Hierarchy which I can see in RSA6.
But all these datasources exist under NODESNOTCONNECTED node in CRM-Quality !!! How can I transport application component hierarchy ??
Any idea?
Regards,
Vikrant.

If your application component hierarchy is assigned to local object then first you need to change the package.
Go to TCode: SE03
For Object Type Selection use: DSAA
Object: APCO
Now change object directory from $TMP to the one being used in your porject.
Also check OSS notes:
542454
382471
For changing the paackage:
Go to TCode: SE03
Select option Change Object Directory entries (Under Folder Object Directory)
In the next screen you box Selection by Object you look for the 1st emptly line
Or you can also click on create object directory button
In the Object type box (Small box for 4 chars) type in DSAA or you can also do F4 and find it..
Then in the box next to it you put in the Object Name
In this case it should be APCO (if this does not work try apco_merged)
Select it and hit execute...
OR
try se09 - choose workbench request - cursor position on request, menu - request/task->object list->include object->freely selected objects
under 'selection by type and name' choose 'selected', mark the checkbox on last blank line, and give 'dsaa' and *
in next screen, cursor on 'apco' and click icon 'in request' (include in request), do the same for 'apco_merged'.
release the request and transport.

How to configure BAPI Source system in BW3.0B

Hi all,
I am using BW 3.0B, i am extracting CSV file from website and want to load its data into infocube for analysis, the problem is for this i need to configure BAPI source system and then i can use DBConnect functionality to get data from CSV,
please inform me how this is possible.
Thanks in advance.

Hi,
please read:
http://help.sap.com/saphelp_nw04/helpdata/en/50/63d6b37bda7f4a92e2dec21b14ceee/content.htm
regards
michael

How to create Web Service as a source system in BI and configure a DS

Hello,
I was wondering if you can give me the links to information where it is explained how to create Web Service as a source system in BI 7 NW 2004s and also how to create a data source that would read data from that Web Service?
Thanks,
AG

Hi AG.
Please check the following documentation which talk about this questions.
[Creating Web Service Source System|http://help.sap.com/saphelp_nw70/helpdata/EN/80/1a618ae07211d2acb80000e829fbfe/frameset.htm]
[Creating DataSources for WebServices|http://help.sap.com/saphelp_nw70/helpdata/EN/43/ec90a315434c5de10000000a155369/frameset.htm]
[Transfering Data Using WebServices|http://help.sap.com/saphelp_nw70/helpdata/EN/80/1a618ae07211d2acb80000e829fbfe/frameset.htm]
I hope that I can be helpful.
Thanks,
Walter Oliveira.

Error in ODI while configuring ERPi Source system

Hi All,
Hyperion Version : Hyperion 11.1.2.1
OS: windows 2008
I'm getting the following Error in ODI while configuring ERPi Source system in workspace.
"942 : 42000 : java.sql.SQLException: ORA-00942: table or view does not exist
java.sql.SQLException: ORA-00942: table or view does not exist "
can anyone guide how can achieve this. thanks in advance.
Regards,
Ravi

Hi All,
Please find the below error log from ERPi configurator [Workspace] and let me know further steps to solve this issue....
ERPI Process Start, Process ID: 71
ERPI Logging Level: DEBUG (5)
ERPI Log File: C:\Windows\TEMP\2\/aif_71.log
Jython Version: 2.1
Java Platform: java1.4.2_08
COMM Create Process Detail - Create Process Detail - START
COMM Create Process Detail - Create Process Detail - END
Error in Start PS HCM Setup Source System
java.lang.Exception: The scenario did not end properly.
at com.sunopsis.dwg.dbobj.SnpScen.a(SnpScen.java)
at com.sunopsis.dwg.dbobj.SnpScen.localExecuteSync(SnpScen.java)
at com.sunopsis.dwg.tools.StartScen.actionExecute(StartScen.java)
at com.sunopsis.dwg.function.SnpsFunctionBaseRepositoryConnected.execute(SnpsFunctionBaseRepositoryConnected.java)
at com.sunopsis.dwg.dbobj.SnpSessTaskSql.execIntegratedFunction(SnpSessTaskSql.java)
at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTaskTrt(SnpSessTaskSql.java)
at com.sunopsis.dwg.dbobj.SnpSessTaskSqlS.treatTaskTrt(SnpSessTaskSqlS.java)
at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTask(SnpSessTaskSql.java)
at com.sunopsis.dwg.dbobj.SnpSessStep.treatSessStep(SnpSessStep.java)
at com.sunopsis.dwg.dbobj.SnpSession.treatSession(SnpSession.java)
at com.sunopsis.dwg.cmd.DwgCommandScenario.treatCommand(DwgCommandScenario.java)
at com.sunopsis.dwg.cmd.DwgCommandBase.execute(DwgCommandBase.java)
at com.sunopsis.dwg.cmd.e.i(e.java)
at com.sunopsis.dwg.cmd.h.y(h.java)
at com.sunopsis.dwg.cmd.e.run(e.java)
at java.lang.Thread.run(Unknown Source)
ERPI Process End, Process ID: 71
Thanks
Ravi

Virtual Transport Path to move BI source system dependant objects.

Currently, our BI Test system (which contains all Transported Objects from BI Dev) is connected to ECC client 100. We want to change BI connection to different Client i.e ECC 115 (this client contain better test Data). We have removed BI connection from Client 100 and connected to Client 115. But our entire Source System Dependent Objects in BI still point to ECC Client 100. To change these Objects to point to the correct Client 115, we are executing the following steps:
1 Remove Source System ECC Client 100 from BI2
2 Connect New Source System ECC Client 115 to BI2
3 Ensure that New Source System Connection to Client 115 have been set up
4 Create a virtual transport path within BI2 for re-import into BI2 queue for the ? Transport Package
5 Open BI2 to assign user authorization in order to be able to create a transport in BI2
6 Copy Source System dependent rules & create Transport
7 Change the Source System Assignments on the target client
8 In SE09 - check that only the required source system has been copied
9 Move the transport in through the import queue
We are stuck at step 4. Basis team says it is not possible to create a transport path from BI2 system to the Virtual System (in the same BI system) and move it. But I am pretty sure that this can be done as I did this earlier in my previous project. This is something related to Basis so I cant help them.
Do you have any idea, how this can be done?
Any help will be highly appreciated.

Hi
I do not understand few things :
- why did you remove the source system ?
- what do you mean by BI2 ? It is the same QA system as before....So why do you need to create a virtaul path for transport ?
The steps you should have followed is to use BDLS transaction to rename ECC100 to ECC115
The source dependant objects would have been renamed automatically.
By the way, you now can start over from your dev and collect the source system dependant objects
Transport the request in QA, paying attention to change the transcodification table to target ECC115 and not ECC100...
Hope it helps
PYG

How To create a new R/3 source System ?

Hello,
Can somebody guide me to a white paper or something related which explains in detail how to create a new R/3 source System in BW?

hi jay,
while i don't have a white paper, it was as simple as right-clicking the source systems tree in AWB and creating a new one - the process is simplified if you're using release 3.0E up, but i can't help you much if not. but you basically have to create an RFC connection to the source system, create a BW user, assign the IDOCs properly (this one i don't know how to do), and linking them all up together in one source system.
if i come across any notes, i'd be more than happy to help.
i'll try asking our Basis people too, just in case they know of anything i could point you at.
ryan.

Configuration of source system

Hi all,
I had a problem with the configuration of source system with bi 7.0 . i wanna know it is same as earlier. can any body help me plz. it urgent
Thanks n regards
KK

Hi Kannan,
To connect both systems you need a background user (like ALEREMOTE) in both systems.
In the source system creation, if you haven't created the RFC connection between BW and ECC you shouldn't select one (chek if DM0 is your ECC system), you should use the three fields below (app server, system ID and system number). Then enter both users and passwords (source system and local system).
In some moment you'll be prompted to log on to ECC, there you should use a DIALOG user, for example, your user. This user should have administrator rights (if you have SAP_ALL it's ok). ECC system should be open for modifications to be able to create the system.
If you still have problems with the users, just include SAP_ALL to both background users and should work.
Hope this clarifies.
Regards,
Diego

How to Transport a planning book to another system

Hello,
Can someone please let me know how to transport a planning book to another system?
Thanks for your time.
Sarath.

Dear Sarath,
Transporting Macro Books:
You can add macro books to a transport request so that they are transported to the target system(s) when the request is released. When you transport a macro book, the system exports relevant notes directly to the target system. For this, you must specify the relevant RFC destination.
To be able to use macro books in another system, you need to have already exported other objects such as the relevant planning object structures and planning areas to the target system. You do this in Customizing for Demand Planning or Supply Network Planning under Basic Settings -> Maintain Manual Transport Link for DP/SNP. You can also use this activity to transport macro books. If the planning area does not exist in the target system, you can transport the macro book, but you cannot open the macro book or use the macros.
To transport a macro book, select the book and choose Tools -> Transport Macro Books. On the dialog box that appears, enter an existing transport request or create new one. The transport request determines the system to which the macro book is transported. Choose Enter.
Regards,
Naveen.

Standards around source system changes

Hello,
This is a general post around good practices to catch source system changes before they impact universes and reports
We have several universes built on source systems and generate user reports
The challenge we face is that there are many changes to these source systems that end up affecting the schema or flow of data. Source teams operate on a best endeavors policy to let us know if any of these impact universes/reports, but many times we discover the impact after the change.
Is there a way to design an automated check or process to proactively check or let us know whenever underlying source systems change from a BO universe stand-point? Are there any tools that can flag such concerns?
I am aware that this is a fairly open question, i am hoping to get advice from seasoned gurus who might have been in similar situations.
Regards

R S,
The only thing I can think of, is not using the same database as your source systems uses.
Instead, use data services to export the data to your own database, specific for reporting. And inside DS you can make it send out emails whenever something did not go as expected (table change, data type change, table renamed).
Your load process from the system database will stop when something like this, but at least it won't effect the reporting side (BO).
This idea on it's own is an entire project and a big one, so I don't know if would be what you are looking for.
Best
Leandro

Transports while importing DS error "Source system QAS does not exit "

Hi Experts,
      For a specific reason we are importing a DS from quality to development.While importing DS in Development side we are getting an error " Source system QAS does not exist".Error message as below:
   Start of the after-import method RS_ISMP_AFTER_IMPORT for object type(s) ISMP (Activation Mode)
   Source system QAS does not exist
   Start of the after-import method RS_ISTS_AFTER_IMPORT for object type(s) ISTS (Activation Mode)
   There is no DataSource with these attributes
   Start of the after-import method RS_ISTS_AFTER_IMPORT for object type(s) ISTS (Delete Mode)
   Start of the after-import method RS_ISMP_AFTER_IMPORT for object type(s) ISMP (Delete Mode)
   Start of the after-import method RS_ISCS_AFTER_IMPORT for object type(s) ISCS (Delete Mode)
   Start of the after-import method RS_ISTD_AFTER_IMPORT for object type(s) ISTD (Delete Mode)
   Start of the after-import method RS_ROUT_AFTER_IMPORT for object type(s) ROUT (Delete Mode)
   Errors occurred during post-handling RS_AFTER_IMPORT for ISCS L
   The errors affect the following components:
      BW-WHM (Warehouse Management)
   Post-import methods of change/transport request CXCK900023 completed
        Start of subsequent processing ... 20090306024549
        End of subsequent processing... 20090306024550
   Execute reports for change/transport request: CXCK900023
   Reports for change/transport request CXCK900023 have been executed
        Start of................ 20090306024550
        End of.................. 20090306024550
   Execution of programs after import (XPRA)
   End date and time : 20090306024550
   Ended with return code: ===> 8 <===
Our system sap bi is not new system, we are using from long time.Transports are working while moving dev to quality and quality to prod.
Can any body suggest on this.
Regards
Vinod

Hi vinod kumar,
i hope you need to map source system From QAS to DEV system,
genereally from DEV to QAS configuration will be there, but here request is moving from QAS to DEV so i think this should be configured.
RSA1-> Tools -> conversion of logical system names -> maintain original system and target system name for both BI and ECC systems.
Regards
Daya Sagar

How to merge key field from external source system with SAP R/3 master

Hi,
In SAP BW 7.0 system, our scenario is Master Data for 0GL_ACCOUNT is coming from SAP R/3 alongwith the Transactional data records for standard FI cubes. Then, one more set of transaction data is coming from external source system, a flat file, into another custom DSO(ZDSO_FI), which also has this GL Account field.
This flat file's GL account, GL_file, has to be basically mapped/merged with the standard 0GL_ACCOUNT field so that at the time of loading the transactional data for custom DSO, ZDSO_FI (with transformation mapping GL_file > 0GL_ACCOUNT), system automatically refers to the 0GL_ACCOUNT master data to load these incoming transactional values, from the external flat file system. How can this be done?
To illustrate the scenario, say I have 5 records in 0GL_ACCOUNT, loaded from SAP R/3 into SAP BW-
0GL_ACCOUNT      Short Description     Source System
100                                   D1                          R/3
200                                   D2                          R/3
300                                   D3                          R/3
400                                   D4                          R/3
500                                   D5                          R/3
Now suppose if my flat file has following sample transactional data, to be uploaded in SAP BW ZDSO_FI-
GL_file      Key Figure1
400          789
200          567
Then after uploading this transactional data in ZDSO_FI (with transformation mapping GL_file > 0GL_ACCOUNT), the 0GL_ACCOUNT data becomes as below-
0GL_ACCOUNT      Short Description     Source System
400
200
100                                   D1                          R/3
200                                   D2                          R/3
300                                   D3                          R/3
400                                   D4                          R/3
500                                   D5                          R/3
So note that the system did not refer the incoming GL's from flat file, although the field is mapped to 0GL_ACCOUNT in transformation, to the already available master data. Rather created 2 new data rows for the GL accounts coming from external system. Because of this I am not able to perform the calculations common from standard FI cube and ZDSO_FI, with GL account as key field. I need to synchronise these data values based on GL Account to proceed with further calculation and am badly stuck.
Request if anyone can please throw some light on how to achieve this seemingly simple requirement?
Thanks in advance.
Nirmit

Better post this thread is in the [Enterprise Data Warehousing|Data Warehousing; forum.

How to load master data from 2 source system without using 0logsys as compo

Hi Gurus,
I am working on a project which has 2 source systems.
Now I have to load master data from 2 source systems without making 0LOGSYS as compunding attribute. Because all the objects which i want to use compunding attribute are reference objects for lot of other info objects. So, i dont want to change the business content objects structure.
So, please help me out providing logic.
thanks in advance
Peter.

Hi Peter,
Can you brief me how did you resolved your issue?
Regards
Utpal

Transport managment, source system changed in import

Hi all,
i faced with the need to change the source system in transport management. I mean, dev source system to assign a different test system source. now is the following:
InfoPackage ZPAK_4MSK400H4M9FGMEKV9ZGDSN4M, source system LGDCLNT300 changed by source system LGTCLNT010 in import (tr STMS).
I'm looking for opportunities to change the target source systems LGPCLNT010.
Where can I find a setting to change the source system during the import?
Thnx.
PS LGPCLNT010 source system already exists in test. only need to assign LGDCLNT300 (DEV) -> LGPCLNT010 (TEST).

Hi,
The entries are maintained in table RSLOGSYSMAP. Goto SM30 put the table name and click on maintain.
Or simply goto transport connection from RSA1 and click on "Conversion button" on tool bar.
Regards,
Durgesh.

How to connect external database into BI source system?

<Moderator Message: Please search before posting. This issue has already been discussed a lot of times. Additionally you might have a look at the online help>
Dear SDN,
I am working on BI 7.0 system.
Client request is to connect the external database into source system.
External database (different server) has installed the Sybase database.
1.Is it possible ?
2.What is the procedure for connectivity from BI end .
3. which server port of external database(sybase databse) need tobe open for firewall policy.
Thanks in advance
Ravi
Edited by: Siegfried Szameitat on Mar 9, 2009 1:23 PM

Hi Ravindra,
Check here........
<link farm removed by moderator>
Thanks,
Vijay.
Edited by: vijay m on Mar 9, 2009 5:43 PM
Edited by: Siegfried Szameitat on Mar 9, 2009 1:23 PM

How to transport FM retraction configuration if source-system changes?

Similar Messages

Maybe you are looking for