How to Transport of Indexes and Crawlers ?

Hi Experts,
We want to transport indexes and crawlers from dev to poc server. but not sure of any method. So, can anybody suggest me a method to transport the indexe and crawlers.
Can somebody please help me in this matter ?
Regards,
Archana.

Hi Archana,
It's not possible. Only you can transport taxonomies, indexes and crawlers must be created again.
Patricio.

Similar Messages

How to get count,index and compare to arraylists

hi
how to get count,index and comparing of 2 arraylist.... plz suggest me asap...

How is your question related to JDBC? And what have you done so far with your code?

How to transport portal index

Hi All,
I have question about transport portal index.
For transport portal content (e.g. iview, page, workset, role) could transport via
System admin> System configuration> Transport> Export or Import right!
But I wonder how can I transport index (web index) to my productive environment because my development and productive use deferent TREX.
Many thanks for all suggest.
Regards,
Kanok-on K.

sorry miss understand
our site use only one trex

How to transport table Index

Hi All,
Any ideas how to transport a table index on an IO, we can create the index but its not allowing us to change the package name, its still in $tmp.
Thanks in advance,
BW Dev.

Hi,
You will have to collect it. Choose the table on which your index you have created.
From the menu option select GOTO --> Object directory entry.
You will be displayed with $tmp as package. Make change in the pacakage to the relevant one.
On Executing the change you will be prompted with a request no. select the one. and transport to your required system.
Hope this helps!!!

How to transport Secondary Index, If I created it via DB02-directly on DB?

Hi Experts,
For curiosity, wuld like to know that,
How to transport the Secondary Index, If I created it via DB02 i.e. directly on DB?
thanq.

Hi srikhar,
1. How to transport the Secondary Index, If I created it via DB02 i.e. directly on DB?
Now, There is no question of transport,
bcos what u will transport.
We can only transport objects which
are created from r/3 data dictionary etc.
regards,
amit m.

How to Transport Extract Structure and datasource

Hi all!
I had recently made enhancements to 0CO_PC_PCP_01 datasource.When I transported the datasource and the Extract structure, I noticed that only the append structure has been transported. The datasource has not been transported.
Could some one tell me how to collect the datasource and the Appended extract structure and transport them.
Thanks,
S.P

Hi Jaya,
I had already tried this already. When I selected the dtasource and selected the transport button. I got the message, action successfully executed. When I checked in SE09, I see no transport. Unless it asks me for a transport request, I will not see it in SE09, right.
~S.P

DM 3.0 Production: How to get only indexes and constraints to DDL?

I'd like to have a DDL file that contains all of the indexes and constraints of my model. From DDL Generation Option I only check all PK and UK constraints and all indexes and leave everything else unchecked. The DDL that I get is empty...

I'd like to have a DDL file that contains all of the indexes and constraints of my model. From DDL Generation Option I only check all PK and UK constraints and all indexes and leave everything else unchecked. The DDL that I get is empty...

How to transport roles, pages and iViews in the PCD from DEV to QA

Hi
Please would someone telll me how I can transport/move roles, pages and iViews we have created in our own area of the Portal Content Directory from our Development to our QA portal environment.
Kind Regards
Claire

Hi,
Please check help.sap.com.
http://help.sap.com/saphelp_nw70/helpdata/en/c5/56599164d0c04cb566ba0e2d7ed55c/frameset.htm
Your Basis/NetWeaver consultants can help you.
Regards,
Masa

How to transport the CO and DATA file to SAP system

Hello Experts ,
I want to know the procedure to import a transport request into an isolated SAP system ( which is not in the transport route ) using the CO and DATA files .
I know that user should have adminstrator role to do this but i dont know how to do this .
Regards
Vivek

Simply copy the source cofile and datafile from the source system to the target system and then import.
Data file is located at /usr/sap/trans/<sid>/data with format R<transport_number>.<sid> and cofile is located at /usr/sap/trans/<sid>/cofile with format K<transport_number>.<sid>
Copy them to the same location on the target system and then go to STMS -> Extras -> Add -> insert the name of the transport in format <sid>K<transport_number>, this will add the transport to the import queue then just simply import the transport.
Regards
Juan

How to Transport Variance Forms and Reports(created in KKO4 and KKO1)

Hello Experts,
I searched for the following but could not find matching answer.Will you, therefore, suggest on the following
1. I created form in KKO4/5
2. Then I created report under above form in transaction KKO1
I did above in development and now need to transport it to quality and then to production after testing
When I select menu Form -> Transport in KKO5, system prompts for customizing request.
Which options(subobjects) should I select? should I select Key figures ( I used standard available key figures in form defination)
After above customizing request for form, I selected menu Report -> Transport in KKO2 to transport the report. It prompted for subobject selection
(a) Report defination (This is by default selected and greyed out),(b) Report form, (c) Key figures , (d) Transport all languages
Which subobjects should be selected out of above.
After above selection for reports, system is prompting for workbench request creation, during WB request creation system is also giving 'prompt for customizing request' creation and by default displaying customizing request created for Form. Should such customizing requiest be part of WB request?
Secondly, I have created 8 forms and more than one report under of the these forms. Should the menu Form/Report -> Transport be selected for each form/report in same transport request? Is only that particular form/Report included in the Transport Request or does it include all existing/standard forms/reports also in transport request.
Your earliest help is greatly appreciated. Thank you in advance

Hi Jose
Thank you very much for the reply
Could you please elaborate on "if any configuration maintained at
sub-objects level"
What I am worrying about is my transport request should not overwrite anything in quality and production systems. It should take only forms and reports that I add/select in it.
I am following the below steps Please correct me if I am going wrong
1) Create new formS in KKO4
2) Create one or more reportS in KKO1 under each of above forms
3) In KKO5 (report painter: Change From screen), select the form that I created in step (1), select menu Edit->Transport form, I get the pop up to select the dependent objects for form. Here I select sub object - Form/Layout, Key Figures, Transport All Languages. On choosing Enter, I get pop up "Prompt for customizing request”. I create new request
4) In KKO5 I select second form I created in step (1) and follow the activities mentioned in step (3) but select the same customizing request. This way I add all the form I created in one customizing request
5) In KKO2, select the report that I created in step (2) select menu Report -> Transport I get pop up selection of Dependent objects for Report. Here I select sub object – Report Definition, Report Form, Key Figures, Transport All Languages. On choosing Enter, I get pop up "Prompt for workbench request. I create new request. When I choose enter on this pop up system automatically gives pop for "Prompt for customizing request” and by default displays cust. request created in step (3). Should I select Continue/Enter here?
And Does it mean both customizing and WB request are clubbed?
What is the sequence of transporting them?
Thank you in advance
Regards
Anand

How could I transport the variant and layout setting in SE16

Hi ABAPers,
Would any of you please advise me on how to transport the variant and layout setting in SE16? I cannot see any transport request in the menu but would like to understand how to manage through transport requests.
Thanks in advance
Kind regards
taro

Hi Taro ,
Use the below 2 links to solve your problem,
Problem in Layout Variant transport - variant not attached to TR
http://www.sap-img.com/basis/transport-guide-tips-for-different-sap-objects.htm
Regards ,
Saravana

How to create a index for solution database - CRM5.0

Hello Experts,
We want to have knowledge search in our IC web client
Trex 7.0 is alreasy installed.
I have done configuration in SAF.Also have created problem/solution in IS01-tcode
When I tried to compile SDB, I am getting error " 2007 - Index does not exist.
Can any one tell me how to create a index and how to assign a problem to SDB.
Regards,
Indhra.E

Hi,
Please ensure the following are correctly configured.
At IMG location CRM > Enterprise Intelligence > Software Agent Framework
1. The knowledge base has been configured - "Name and Configure Search Engine".
2. The knowledge base has been included in application - "Configure Application". The knowledge base should be in both application "ALL" and "ICWEBClient". (SAP note - 1091759 refers to similar error)
Then, as you might have executed the BSP application, CRM_EI_CMP_ADMN->default page, and select some language & click on Full index.
You might want to monitor the indexing process in TREX with the help of TREX admin. If nothing is shown in the index queue after the detail compilation shows status as finished, then the problem is in the CRM side and the documents are not flowing to TREX. So you might want to put breakpoint at CL_CRM_SAF_SE_TREX_ABAP classes' FULL_COMPILE method and analyse.
Kindly get back with any more details that you find if the problem doesn't gets solved.
Regards,
Uma.

How to transport industry sector

Hi There,
I configured industry sector to "Standard (core)" in transaction SBIW, but I can't figure out how to transport to QA and production?
I even try to transport entry in SE16 table TMCLBW, but all transport option are grey out.
Please help?
Thanks
Joey

We were unable to make a transportable change, and wre forced to make the change locally in all our systems. -Doug

Transportation planning pt. and loading points

Hi Experts,
How many Transportation planning pt. and loading points is to be maintained?
Is it to be maintained according to plants?
Thanks in advance
Regards,
shabnum

Dear Shabnum
The transportation planning point is an organizational unit in Logistics, responsible for planning and processing transportation activities.
It organizes the responsibilities in a company, e.g. according to shipment type, mode of transport or regional departments.
Loading Point is nothing but Shipping points which are independent organizational entities within which processing and monitoring of the deliveries as well as goods issue is carried out. A delivery is processed by one shipping point only.
A shipping point can be determined for each order item. How the shipping point is determined depends on three factors:
=> The shipping conditions from the customer master record (Shipping screen)
 For example, it might have been agreed with the customer that the goods are to be delivered as soon as possible.
=> The loading group from the material master record (Sales/Plant Data screen)
 You could, for example, specify a loading group that defines that the goods must always be loaded with a crane or a forklift.
=> The delivering plant
 This plant is determined per order item either from the customer master record or from the material master record. However, you can also enter it manually for each order item.
Thanks
G. Lakshmipathi

How to create missing indexes

Dear sir
I have find some missing indexes is there in T code db02
can anyone tell me how to create missing indexes and how to manage that thing frequentely
regards
krishna

Hi,
in SE12 you can activate the index. (display the index and activate it)
Alternatively in SE14 the index can be created with the database utilty.
(display the table, click indexes, choose your index, then create it).
In case you have a big database table you should prefer SE14 and use
the background option in order to avoid timeouts.
I'm not aware of an automatism for manage this frequently. This is a
task carried out by SAP system or database administrators.
Kind regards,
Hermann

How to Transport of Indexes and Crawlers ?

Similar Messages

Maybe you are looking for