How to Transport OMT3R changes to other Clients.

Hello All
I have done the changes to MM01 Screen sequence using transaction OMT3R.
But while saving it did not ask for transport request.
Transport option is grayed out and not able to know include it to any transports.
Can any one tell me how to inlcude this changes into a Transport Request and move it to other clients?
Thanks & Regards
Madhu K

Hi Madhu,
the values of tcode OMT3R ('Maintain Order of Main and Additional Screens') are saved in database table T133D ('Sequence Control forLogical Screens').
If these values are missing on the target system, note 108059 ('Transport of Customizing settings made in OMT3') applies. Please proceed as described there to transport table T133D, too.
Regards,
Mauro

Similar Messages

  • How to transport Minor changes in BPC 7.0 to other client

    Hi,
    I am very new to BPC and got an ticket to do a minor change in script logic. We are in BPC 7.0.
    I am not sure how I can transport this minor change from Dev to other client.
    My question is:
    1. Do we need to make system offline while making changes to Script logic in BPC Admin or it is required only at the time of collecting transport request in BI using tcode: UJBPCTR?
    It would be kind enough if any one could let me know What are all the activities we need to consider/take care before transporting objects from BPC DEV to BPC QUALITY
    Thanks in Advance.
    Regards, Trine

    You only need to take it offline when executing UJBPCTR and when importing in the target system.  The system willl collect all of the appset and transport it, but will do a delta calculation on the target system to determine if any structure changes are required.  The script logic data should simply be overwritten.
    Cheers,
    Rich Heilman

  • How to transport the changes of lsmw "Read display Program" changes to prod

    Hi,
    i have made some changes in the SAP generated program /1CADMC/SAP_LSMW_READ_<>.
    i.e., in step : Read display program
    the issue is that i made changes...but the changes are stored in $tmp.
    now how to move these changes to Production.
    when i assign to any package it is showing an error saying
    "/1CADMC/SAP_LSMW_READ_<>cannot be assign to package.move to package starting with "/1CADMC/".
    Thanks.
    Kumar.

    HI,
    LSMW cannot be transported from one client to another.
    You will have to do IMPORT EXPORT.
    Run transaction LSMW:-
    Give the Project, Subproject and Object.
    From Menu go to Extras->Export Project.
    Specify the project name
    By default everything in the project will be selected.
    If you want to transfer only a single subobject of the whole project then first deselect everything.
    Deselection can be done by clicking on the description besides then project name.
    After that just select the individual object.
    Then press the export button.
    It will prompt you to save the lsmw in your local machine.
    Save it.
    Similarly Import it to the production system.
    Please note that your changes in the read program will not be copied via import export.
    You will again have to make it in the production system.
    Changing the read program is not advisable as the changes will be lost if someone once again regenerates the progrsm.
    Regards,
    Ankur Parab

  • How to transport Parameter changes in a crystal report

    Hi All,
    Very Good morning!!!
    I have designed a crystal report with static parameters. Earlier i used to have a dropdown kind of input selection for my parameters.
    Now i got a new requirement for a direct input in the field....tht means no dropdown ...single date field is to be entered directly.
    Accordingly i have removed the dropdown and changed to a single direct date field. I saved these changes to a request and transported to quality. Not sure whether the parameter changes are collected into a request.
    Whereas i couldn't found any changes of my parameters in quality. They are as same dropdown manner in the quality whereas i need them to be a direct field date entry which did not affected the quality server after transporting the changes.
    Could some one please let me know how to reflect these changes in quality server regarding parameter changes in a crystal report for BW.
    Thanks in Advance.
    Jitendra

    Please re-post if this is still an issue or purchase a case and have a dedicated support
    engineer work with your directly

  • How to Transport Workflow Development to another client in the same system

    Hi ,
    I have created a Workflow in DEV 010 Client. But I have all the test data in DEV 020 Client. Please let me know how to transport this workflow development from DEV 010 to DEV 020.
    Immediate response will be highly appreciated.
    Thank you,
    Best Regards,
    Vish

    Hi Imitiaz,
    Thanks alot for your reply, I have the authorization for WF and it sloved my problem. Thanks .
    Note: I have aloted full points to you.. Keep Rocking..
    Best Regards,
    Vish

  • How long LDAP update changes in Jabber4W client

    Hi.
    My query is if I change my telephone number in Active Directory, it doesn't flow through to the Jabber client, unless I shut the client down, and reopen.
    Fellow collegues still see the old telephone number until they do the same. We are on 9.2.1, and I was pretty sure it was almost instantaneous in prior version, even though the issue would lay with the CUPS / LDAP integration.
    Could someone advise if they change an attribute in AD, how long it takes to flow through to the end user including collegues who are watching? Or am I missing something in config in CUPS server or something.
    Thanks
    Mal

    Hi Srdjan,
    Thanks for your response. I've done some further testing and what I am experiencing with 9.2.1 client is.
    1. I change telephone field in AD to new phone number.
    2. I run a wireshark instance on my PC, with Jabber client.
    3. In Jabber client, I do search on user who I just changed phone number.
    4. Do view profile and it is still showing old details.
    Now when I check the wireshark trace I can see the LDAP query from my PC to LDAP server and the response from LDAP server to my Jabber username search shows the new phone number just changed in the packet.
    Therefore the Jabber client is searching the LDAP correctly and LDAP is sending the correct information, but Jabber client not updating the user details.
    Last note if I shut the Jabber client and reopen, the new phone number will populate the user.
    If anyone can do a test to see if they have the same experience with 9.2.1 client, just change a phone number in AD, and then do search on user and see if new number replicates.
    I'm sure with previous versions it happened instantaneously???
    Thanks
    Mal

  • How to keep layout changes in other pages

    I am just starting with iWeb and came across a question. When I choose a theme for a website and make the 'welcome' page, but change some layout things, colours, positioning of textboxes, is it than possible to copy those changes in the other pages like 'about' and so? Or do I have to copy the first page over and over? In the least case I will have a problem with the albums and slide show I guess?

    Welcome to the Apple Discussions. iWeb doesn't have the capability of carrying over layout changes from the first page to additional pages. If you plan on using the same theme frequently create a second site, add each page type that you might use, make the layout changes to each one and save. Then if you need a photo page in your working site duplicate the photo page in the "layout" site and drag it up to the working site.
    You can send a feature request to the iWeb developers via http://www.apple.com/feedback/iweb.html.
    OT

  • How to transport a VC model other than the simple import/export?

    Hello,
    What are the other options I have to transport a VC moel from one portal to another other than the export/import option that goes through my local filesystem?
    If I will use the portal transport package to transfer the iView generated it won't work since the iView doesn't contain the complied application in it that needs to be deployed to the server. So what are the other option I have? And as a followup question, does VC integrated with NWDI or NWDS in some way?

    Hi,
    > If I will use the portal transport package to
    > transfer the iView generated it won't work since the
    > iView doesn't contain the complied application in it
    > that needs to be deployed to the server.
    Are you Compiling the VC model with "Deploy Model with PAR" checkbox in compiler tab checked? If you create a transport package and add all objects in the model folder, it will work.
    What are the issues you are facing in portal transport import?
    Regards,
    Sooraj

  • How to transport generated reports through report painter

    Hi All,
    We are upgrading from 4.6 to ECC6. Previously somebody created reports for Finance  through report painter, now in the new system they are two to three system generated reports which are produced by report paintyer (I guess) are retrieveing wrong data.
    So I debugged the generated reports and found two locations
    1. generated report as syntax error
    2. at selection it is having an additional filter with company code for each table  like coss, cosp, cospp which I dont find that filter in the old 4.6 generated report, I modified the generated report but problem is that it dont give me any transport number.
    So these reports are client specific, can any one suggest me how to transport these changes to quality and production environment.
    I tried with transaction GCTR , but it is failing when it is released.
    Can any one suggest me.
    Thanks
    Tangudu

    No better manual than SAP help!
    Below is the link to Report Painter
    http://help.sap.com/saphelp_erp2005/helpdata/en/5b/d22cee43c611d182b30000e829fbfe/frameset.htm
    Regards
    Sreenivas

  • How to transport a deleted query?

    I have deleted one query in developmeny system. I thought it will ask for tranport request.But it did not ask for any transport requast.Now it is deleted from development system.Please let me know how to transport this change in production?

    Hi Saikat,
    Was this query transported to the prod system, or created directlyin prod? If you have transported the query, you would not be able to delete without first assigning a transport request to the BEx dev class...check if there is any request assigned to the BEx dev class (RSA1 > transport connection)
    Hope this helps...

  • How to transport standard text in SO10 to different system.

    Hi,
    I need to change the standard text in SO10. I need to change the custom text. We have a custom text id (zval) associated with it. How to transport the changes i have done from Dev to Quality to Production.
    I wanted one clarification: when we create the transport manually, whether only those changes what i have done for the text can be transported or it will include all the other text which are initially present (like table entries). From the program RSTXTRAN, can you give the what are the inputs need to given.
    Please let me know regarding this. Thanks in advance

    Steps..
    Create a work bench CR in the transaction SE09..
    Modify the task to Development correction / Repair..
    Go to the program RSTXTRAN..
    In the name of correction give the task number (Not the CR number)
    Give the Text Key..Your standard text name..
    Press F8...
    Press select all..
    Then Press enter..
    Then press the button "Trsfr texts to corr".
    Now the standard texts will be moved to a CR..
    Then release the CR and move it to QA..

  • How to send the transport request from one client to other client?

    Hello Friends,
    I have generated one transport request in one of the client in Development server.Now as it is  customizing request so unless and until i transport it to other client within the same server, Changes will not be visible in other clients.So how to transport this customizing request from one client to other client within the same server.
    Thanking you guys in advance.
    Regards,
    Jitendra

    Hi Jitendra,
    Release your Transport Request via SE10, then go to STMS & import the request first to your quality server, then to your production server.
    Apologies for the incorrect inputs, please use SCC1 as advised by other forum members
    Hope the above clarifies your query.
    Regards,
    Vivek
    Edited by: Vivek on Mar 16, 2009 1:05 PM

  • How to transport changes made on Workflow Template to other cleint

    We have make changes to Workflow template via tcode PFTC_CHG (Change Task), with workflow builder screen, we make changes on the standard task, work item text etc, save the changes to workflow template WS90000XXX. However the changes we make is not save under a Transport Request number.
    How to make the changes on workflow template to save under a transport request and transport it to other client. ?

    Hi Eric,
    All development and customization of workflwo are saved in a transport request.
    If while making the changes it did not prompt you for a TR then check the TR in whcih the task was created.
    To port TRs follow the below procedure:
    1. Go to t-code SCC1.
    2. Select the transport request number and enter the source system (client)
    3. Click on 'Including Request Subtasks.
    4. Click on button 'Start immediately'
    This would port the TR.
    Please note to port workbench TRs before the customizing TRs.
    Regards,
    Saumya

  • How to Transport standard text in scpits from 1 client to other

    HI I am veerendra,
    Can you please tell me,
    How to Transport standard text in scpits from 1 client to other
    THanks,
    Veerendra

    Hi veerendara,
    1. a little tricky
    2. goto se09 and create a new
    customizing rqeuest.
    3. after that
    in the object list,
    go in edit mode
    and a new window will come
    where u can add the objects(in table control)
    4. there u put
    program id = R3TR
    object type = TEXT
    object name = TEXT,YHRS_FNF_LTR,YHR1,E
    where
    TEXT = TEXT
    YHRS_FNF_LTR = name of standard text
    YHR1 = TEXT ID
    E = english language
    regards,
    amit m.

  • How do I use pots on my client machine to change values, from the field, on my server machine and all other client machines?

    I am using Lookout 4.5, build 12, and I am having a problem concerning pots. I have data tables created for the different size sewer stations my system monitors. For each station, there are setpoints for starting and stopping of the pumps. I want to be able to change the setpoints for a station on the client file using a pot and have it change on all other machines running Lookout. I did this in 3.8 using DDE, but I don't want to use DDE anymore.
    I created a pot on the client file and URL'ed it to a pot on the server. On the server I created a table with a generic member "A" named "Lead Setp" and then created a member "A1" named
    "C5_1LeadSetp" then a member "A2" named "C3_1LeadSetp" and so on....
    In this table I connected the generic member "A" to the Pot I created on the server, and I connected A1 to its corresponding setpoint signal coming in from the field.
    On the client file I connected (in the table similar to the one on the server but with all signals for the station) the "A1" member to the setpoint signal coming in from the field, and I connected the "A" member to the Pot I created on the client file which is URL'ed to the pot on the server file.
    But, when I change the value of the pot on the client file, only the pot on the server and the "A" member in the table on the server change to the value of the pot on the client. The "A1" member whose screen I am changing the values from on the client does not change! This is the last thing I have to do and my file will be completely converted to 4.0. Does anyone have any ideas?
    Thanks for any responses..
    GBWY
    Jason
    Jason Phillips

    Hi Jason,
    If I understood your task correctly, you want to change the Setpoints on the Server DataTable using Pots from different clients. And also reflect these changes on the clients locally.
    You correctly remoted the Pots on the Clients to the corresponding Pots on the Server. However, you do not need tables on your clients. All you need is Expressions on each client to the particular cell of the Clients.
    So, to summarize: On the Server, the Pots write to the DataTable. And since the Pots on the Clients are remoted to these Pots on the Server, you can affect any change using these Pots. Because of the common remote source (Server Pots, i.e.) all of these Pots will always be in sync. Finally, to get the Setpoints on the Clients, just insert Expressio
    ns to the Server's DataTable.
    I am attaching a simple example (exmpl.zip) which does this. There are three processes -- My_Server, My_Client1, and My_Client2. I had them setup on the same machine so the paths are all process relative, but you can always change those to computer relative or absolute and move the client processes to diff machines.
    Hope this helps.
    Rgds,
    Khalid
    Attachments:
    exmpl.zip ‏12 KB

Maybe you are looking for