How to transport Parameter changes in a crystal report

Hi All,
Very Good morning!!!
I have designed a crystal report with static parameters. Earlier i used to have a dropdown kind of input selection for my parameters.
Now i got a new requirement for a direct input in the field....tht means no dropdown ...single date field is to be entered directly.
Accordingly i have removed the dropdown and changed to a single direct date field. I saved these changes to a request and transported to quality. Not sure whether the parameter changes are collected into a request.
Whereas i couldn't found any changes of my parameters in quality. They are as same dropdown manner in the quality whereas i need them to be a direct field date entry which did not affected the quality server after transporting the changes.
Could some one please let me know how to reflect these changes in quality server regarding parameter changes in a crystal report for BW.
Thanks in Advance.
Jitendra

Please re-post if this is still an issue or purchase a case and have a dedicated support
engineer work with your directly

Similar Messages

  • How to increase the width of the Crystal Report

    Hello All
    How to increase the width of the Crystal report template in the CR designer in .NET 2005 editor ?
    I need to design a report which has to accomodate more number of columns.So achieve that i need to redesign the report having more width.
    CrystalReports version 10.2.3600.0
    Thanks in advance
    Srivatsa

    HI Srivatsa,
    You can make a wider report by creating virtual pages. Virtual pages are the extra pages to the right of the main page that get created to accommodate cross-tabs that are wider than a single page. By inserting a cross-tab in a report then suppressing it, you can create a report that is multiple pages wide.
    Insert and Suppress a Cross-Tab
    1. On the 'Insert' menu, click 'Cross-Tab'.
    2. In the Cross-Tab Expert, click any field and move it into the 'Columns' box, and click any field and move it into the 'Summarized Fields' box. Do not move any fields into the 'Rows' box.
    3. Click the 'Customize Style' tab and select the following check boxes:
    " Suppress Empty Rows
    " Suppress Empty Columns
    " Suppress Row Grand Totals
    " Suppress Column Grand Totals
    4. Click the 'OK' button and then insert the cross-tab into the Report Header section.
    5. On the 'Report' menu, click 'Format Sections'. Click 'Report Header' and select the 'Underlay Following Sections' check box.
    When you run the report you will not see the cross-tab, but you will be able to scroll to the right and see multiple virtual pages.
    ====================
    NOTES:
    " As there are no rows to the Cross-Tab, it does not carry on to Page 2 and the virtual pages do not appear past the first page.
    " To increase or decrease the number of virtual pages do one of the following:
    - Limit the number of records for the field in the 'Column' box of the 'Cross-Tab Expert' using the 'Select Expert'.
    - Change the width of the 'Column' field in the Cross-Tab by moving the edges of the field.
    ====================
    How to Insert Fields on Virtual Pages
    You cannot drag-and-drop a field onto a virtual page, you can only do so on the main page. To get a field to appear on a virtual page:
    1. Insert the field on the main page.
    2. Click the 'Preview' tab.
    3. Drag the right edge of the field to the right, onto the virtual page.
    4. Drag the left edge of the field to the right, onto the virtual page.
    Hope this helps!!
    Regards,
    Shweta

  • How to add/create additional page in Crystal Report Layout SAP B1

    Hi,
    I wanna ask about How to add/create additional page in Crystal Report Layout SAP B1 ?
    I want when user print Purchase Order then on last page also print some page like Penalty Clause etc.
    Pls help me to find the solution.
    Br,
    Thomas Marsetyo

    Hi,
    In your report footer, set it to create a new page before it is printed (In 'Section Expert', select the Report Footer -> 'Paging' tab -> Check 'New Page Before' checkbox). Throw your Terms & Conditions into the Report Footer section.
    If you already have a Report Footer that you want to keep, just split the footer into two sections (Right-click the Report Footer section -> 'Insert Section Below') and follow the same procedure for the newly created section.
         Check this Link
    http://stackoverflow.com/questions/9232239/adding-an-additional-page-to-end-of-a-crystal-report
    http://www.crystalreportsbook.com/forum/forum_posts.asp?TID=18960
    Regards,
    Manish

  • How to use a connection ODBC in  crystal reports viewer?

    Hi Guys!
    I need to know if for update a report in crystal reports viewer, is necessary, have a connection SAP Business Objects Business Intelligence. How to use a connection ODBC in  crystal reports viewer?

    Hi Guys!
    I need to know if for update a report in crystal reports viewer, is necessary, have a connection SAP Business Objects Business Intelligence. How to use a connection ODBC in  crystal reports viewer?

  • How to suppress a blank section in crystal report

    how to suppress a blank section in crystal report. although i have set the property
    "suppress blank section "=true ,still i m unable to suppress my section
    please help me to cope up this issue.
    thanks in advance

    One recommendation I make, when troubleshooting suppression issues, is to put a visible border of the section, area or object to be suppressed, and borders for all objects contained in the section or area.  This will help isolate what's suppressed, and whether the section is truly blank or has content that's blank.
    Furthermore, I recommend indicating which SDK and what version you're using when posting.
    Sincerely,
    Ted Ueda

  • How to use drill down option in Crystal Report

    Dear all,
            I want to know how to use drill down option in Crystal report 2008.  In below i have explained my screnario
    For example
       My scenario is.  In crystal report I have Purchase order like PO101,PO102.  Each purchase order have 5 line items.  If i drill down each purchase order it should display line item in crystal report. 
    Regards,
    Baskaran.

    hi,
    Create a Group on 'Purchase order'.
    Group Expert -> Select the Purchase Order and Click the arrow button such that it appears right side. Click ok.
    GH1 is inserted.
    Your detail section should include 'Line items' fields.
    Right Click 'Detail' section on left hand side,  Click 'Hide (Drill down Ok)'.
    Now you will see only 'Purchase order's in Group Headers.
    Now when you click on a particular order, you will see respective line items.
    Regards,
    Vamsee

  • How to   Pass Parameter from BIP  to Dashboard  Report

    Hi,
    Parameter from BIP to Dashboard Report
    If I select BIP report paremeter should pass value to dashboard report
    thanks in advance.
    CHEERS ,
    Jel

    Hi Saichand,
    I hav gone through above link its passing values from Dashboard prompt to BIP report only..
    just i need like reverse (if i click on BIP report value then it should pass that value to Dashboard reports) in this this case how to pass parameter from BIP to dashboard report
    Thanks in advance
    Cheers,
    Jel

  • How to build Table of Content in Crystal Reports

    Hi,
    Initially, I am looking for an article about how to build Table of Content in Crystal Reports in table-based approach----including how to write to DB table from report:
    http://support.businessobjects.com/library/kbase/articles/c2011950.asp
    However, the link above is invalid. I also searched through SDN articles, but no luck.
    Can someone please forward me the link if you happend to know?---does not have to link to this specific article, any working solution is just fine.
    I am aware of another approach which put the TOC to the end of the report(http://www.ml-consult.co.uk/cryst-05.htm), which probably does not satisfy the requirement.
    If you have other solutions, your share is greatly appreciated.
    Thanks a ton!

    [Is it possible to create a table of contents in Crystal Reports?|http://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/oss_notes_boj/sdn_oss_boj_erq/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/scn_bosap/notes%7B6163636573733d36393736354636443646363436353344333933393338323636393736354637333631373036453646373436353733354636453735364436323635373233443330333033303331333233313335333133303330%7D.do]

  • How to map ECC Infoset Query to Crystal Report

    Hi All,
    I am using 25 standard SAP crystal reports which have been mapped on the top of ECC system. Some of reports are working well but some are not working due to unable to find query. The name of the report is Controlling Dashboard report and it has CO_OM_CA_20_Q1 query which I was unable to map on ECC using Crystal Report. I do not knw how to map ECC table infoset to Crystal report.
    Can anybody assist me to get solution?

    Hi Efstratios,
    Hope you are well!
    I am experiencing the same issue:
    unable to get this infoset query CO_OM_CA_20_Q1 in Crystal Report which is made on the top of ECC
    I followed the BI quick guide as well, I am on EPH 4 and I am able to see both the Query Infoset CO_OM_CA_20_Q1 and its related Infoset /SREP/CO_OM_CCA_20.
    But unfortunately, it wouldn't let me update the connection approprietaly.
    Is this something you can assist me with?
    Thanks in advance
    Yann

  • How to view the History of a Crystal Reports iView in EP6?

    How to view the History of a Crystal Reports iView in EP6?
    Our Crystal reports are viewed via Crystal Enterprise and are both BW and non-BW Crystal reports.
    I have looked at the three supplied iViews from Business Objects (alert, folder and thumbnail) but I have only been able to access the last instance or run on demand a CR.
    Our users would prefer to see a listing of the past runs of the report and choose which report to view.  What parameters need set in the EP6 iView to see the history of a report?

    Hi Heather,
    it is correct that there is no sample iView that shows the History of Crystal Reports that are stored in Crystal Enterprise but there a sample codes on our web site and there are sample codes as part of the SDK documentation that show how to call the history and you should be able to take the code and create your own Java or ASP iView based on that.
    the link to our developer library :
    http://www.businessobjects.com/products/dev_zone/default.asp?intcmp=products12
    hope this helps
    Ingo

  • How to suppress "enter parameter values" screen in crystal reports for Visu

    Hi,
        I am passing parameters to the report through program.  But still the "Enter Parameter Values" Dialog is shown every time I run the application.  Code used to pass parameters is given below:
                    rptCBBookRpt objRptCBBook = new rptCBBookRpt();
                    objRptCBBook.SetParameterValue("@Branch", strBranch);
                    objRptCBBook.SetParameterValue("@CoName", mdlFinIF.objCommon.CoName);
                    objRptCBBook.SetParameterValue("@Heading", strHeading);
                    objRptCBBook.SetParameterValue("@UserInfo", mdlFinIF.objCommon.ReportInfo());
    How can I suppress the "Enter Parameter Values" dialog.  Please help.
    Cris Evan

    Well, no. But this being a community, not technical support, you may get a response, perhaps even an actual answer, or you may not...
    If you are not getting a response or an answer, you may want to consider obtaining a dedicated support here:
    http://store.businessobjects.com/store/bobjamer/en_US/pd/productID.98078100?resid=S6I@hgoHAkEAAGsiyVkAAAAR&rests=1282226845369
    Look at samples here:
    https://wiki.sdn.sap.com/wiki/display/BOBJ/CrystalReportsfor.NETSDK+Samples
    Check out the [Crystal Reports for Visual Studio 2005 Walkthroughs|https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/2081b4d9-6864-2b10-f49d-918baefc7a23] - it will apply to your version of CR...
    And of course, developer help files.
    - Ludek

  • How to disabled the input parameter dialog box in crystal reports 9

    Post Author: Murtaza
    CA Forum: General
    Hi friends,I have got stuck with a weird problem.  In my
    crystal report, I have set up some input parameters.  I am setting
    values for these parameters somewhere inside code.  But I don't
    want to show the default input parameter dialog box. Under any case,
    user should not see the ugly parameter dialog box that crystal
    presents.   Please suggest me how I can achieve
    this.  I cannot do this through code, because our environment does
    not allow that.  I have to do this in crystal reports viewer and
    by setting some property of the crystal report object. But everything
    must be done on UI, not through code. So, the solution should not be the following. 
    // step before step 1
    // **** the line needs to refer to the report and be set before setting
    ReportSource in the viewer to myReport
    myReport.EnableParameterPrompting = False
    Any help would be greatly appreciated.  Murtaza

    Post Author: sleahcim
    CA Forum: General
    Hi Murtaza,
    Unfortunately, I am not aware of any method to suppress the prompt for the input parameters, but still use them.  It is truly a design-related issue for the report.  The reason that the prompt appears is because the parameter it is prompting for is used in the report; in particular either the Group or Record Selection, or referenced in another formula.
    The only way I can think of to not show the prompt, is to not use the parameter in the report.  You did mention that you are setting the value of the parameter inside of the report -- are you doing this through using a formula?  Perhaps you can just remove the parameter and only use the formula that you are setting the default values with.
    -Michael

  • How to transport the changes of lsmw "Read display Program" changes to prod

    Hi,
    i have made some changes in the SAP generated program /1CADMC/SAP_LSMW_READ_<>.
    i.e., in step : Read display program
    the issue is that i made changes...but the changes are stored in $tmp.
    now how to move these changes to Production.
    when i assign to any package it is showing an error saying
    "/1CADMC/SAP_LSMW_READ_<>cannot be assign to package.move to package starting with "/1CADMC/".
    Thanks.
    Kumar.

    HI,
    LSMW cannot be transported from one client to another.
    You will have to do IMPORT EXPORT.
    Run transaction LSMW:-
    Give the Project, Subproject and Object.
    From Menu go to Extras->Export Project.
    Specify the project name
    By default everything in the project will be selected.
    If you want to transfer only a single subobject of the whole project then first deselect everything.
    Deselection can be done by clicking on the description besides then project name.
    After that just select the individual object.
    Then press the export button.
    It will prompt you to save the lsmw in your local machine.
    Save it.
    Similarly Import it to the production system.
    Please note that your changes in the read program will not be copied via import export.
    You will again have to make it in the production system.
    Changing the read program is not advisable as the changes will be lost if someone once again regenerates the progrsm.
    Regards,
    Ankur Parab

  • How to Transport OMT3R changes to other Clients.

    Hello All
    I have done the changes to MM01 Screen sequence using transaction OMT3R.
    But while saving it did not ask for transport request.
    Transport option is grayed out and not able to know include it to any transports.
    Can any one tell me how to inlcude this changes into a Transport Request and move it to other clients?
    Thanks & Regards
    Madhu K

    Hi Madhu,
    the values of tcode OMT3R ('Maintain Order of Main and Additional Screens') are saved in database table T133D ('Sequence Control forLogical Screens').
    If these values are missing on the target system, note 108059 ('Transport of Customizing settings made in OMT3') applies. Please proceed as described there to transport table T133D, too.
    Regards,
    Mauro

  • How to show arabic data in to crystal reports ?How to aligh crystal report right to left

    <p>we are trying to make a crystal report for both english and arabic..All the arabic data is stored in data base tables.And for arabic screens we need tables and datas come right to left.. </p><p>1)How can we get the arabic data and right to left alignment in crystal reports? </p><p>2)Is thee any direct method to change the report alignments? </p><p>can u please send some sample codes. </p><p>we are using java version= 1.5 </p><p>database using =Oracle 9i </p><p>char set we are using for arabic= CP1256</p><p> Tomcat using=4.1 </p><p>we are using Crystal Reports11 </p><p>We are not having seperate rpt files for reports. we are making each Sections and adding this sections to FieldObjet to make the report dynamically. A sample Employee report in english is attached..Can u instruct how can i get this report in arabic assuming all datas are stored in database. </p><p><br />import java.awt.BorderLayout;<br />import javax.swing.JFrame;<br />import com.crystaldecisions.ReportViewer.ReportViewerBean;<br />import com.crystaldecisions.sdk.framework.CrystalEnterprise;<br />import com.crystaldecisions.sdk.framework.IEnterpriseSession;<br />import com.crystaldecisions.sdk.occa.managedreports.IReportAppFactory;<br />import com.crystaldecisions.sdk.occa.report.application.ReportClientDocument;<br />import com.crystaldecisions.sdk.occa.report.data.;<br />import com.crystaldecisions.sdk.occa.report.definition.;<br />import com.crystaldecisions.sdk.occa.report.lib.PropertyBag;<br />import com.crystaldecisions.sdk.occa.report.lib.ReportSDKException;<br />import com.crystaldecisions.sdk.occa.report.reportsource.IReportSource;<br />public class ReportSample {<br /> ReportClientDocument rptDoc=null;<br /> int fldTop=0;<br /> int fldWidth=1440;<br /> int fldHeight=400;<br /> int pageWidth=11500;<br /> ReportSample(){<br />  try{<br />   IEnterpriseSession oEnterpriseSession= CrystalEnterprise.getSessionMgr().logon("Administrator", "","zzzza","secEnterprise");<br />   IReportAppFactory oReportAppFactory = (IReportAppFactory)oEnterpriseSession.getService("", "RASReportService");<br />   rptDoc = oReportAppFactory.newDocument(java.util.Locale.ENGLISH);<br />   Table oTable = new Table();<br />   oTable.setConnectionInfo(getConnectionInfo("zzzzz","zzzz","zzz", "zzz"));//Connectin to oracle database<br />   oTable.setName("EMP1");<br />   rptDoc.getDatabaseController().addTable(oTable, null);<br />         String[] columnName={"EMPNAME"};<br />       Section dtlSection=(Section) rptDoc.getReportDefController().getReportDefinition().getDetailArea().getSections().getSection(0);<br />   int fldLeft=100;<br />   for (int i=0;i<columnName.length;i+)<br />   {<br />    <br />    dtlSection= (Section) rptDoc.getReportDefController().getReportDefinition().getDetailArea().getSections().getSection(0);<br />     try{<br />     FieldValueType fldValueType = FieldValueType.stringField;<br />     String javaDataType="String";<br />      add_db_field(<br />      dtlSection, <br />     oTable.getName()"."columnName<i>, <br />     fldValueType,javaDataType,<br />     fldLeft, fldTop, fldWidth, fldHeight);<br />     }catch(Exception e){<br />      e.printStackTrace();<br />     }<br />    fldLeft = fldLeftfldWidth;<br />   }<br />   <br />       <br />   try { <br />          //Create and set up the window.<br />          JFrame frame = new JFrame("ReportsViewer");<br />          frame.setTitle( "Crystal Reports Viewer");<br />          frame.setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);<br />          ReportViewerBean viewer = new ReportViewerBean();<br />          viewer.init( new String[0], null, null, null);<br />          IReportSource rptSource = rptDoc.getReportSource();<br />          viewer.setReportSource( rptSource );<br />          frame.getContentPane().add( viewer, BorderLayout.CENTER );<br />          frame.setSize( 700, 500 );<br />          frame.setVisible(true);<br />          viewer.start();<br />   }catch(Exception e)<br />    {<br />     e.printStackTrace();<br />    }</p><p>   }catch(Exception e)<br />   {<br />    e.printStackTrace();<br />   }<br /> }<br /> public ReportObject add_db_field(Section oSection, String field_name, <br />   FieldValueType oFieldValueType,String fldDataType,<br />   double x, double y, double w, double h)<br /> throws ReportSDKException<br /> {<br />  DBField oDBField = new DBField();<br />  oDBField.setName(field_name);<br />  oDBField.setType(oFieldValueType);<br />  FieldObject oFieldObject = new FieldObject();<br />  oFieldObject.setDataSource(oDBField.getFormulaForm());<br />  oFieldObject.setFieldValueType(oDBField.getType());<br />  IndentAndSpacingFormat indentSpacing = new IndentAndSpacingFormat();<br />  IStringFieldFormat stringFieldFormat = oFieldObject.getFieldFormat().getStringFormat();<br />  stringFieldFormat.setIndentAndSpacingFormat(indentSpacing);<br />  oFieldObject.getFieldFormat().setStringFormat(stringFieldFormat);<br />  rptDoc.getReportDefController().getReportObjectController().add(oFieldObject, oSection, -1);<br />  return oFieldObject;<br /> }<br />  public ConnectionInfo getConnectionInfo (String new_username, String new_password, String new_dsn, String new_database)<br /> {<br />  <br />      ConnectionInfo oConnectionInfo = new ConnectionInfo(); // Make a copy, don&#39;t change the original.<br />      PropertyBag oPropertyBag1 = oConnectionInfo.getAttributes();<br />      oPropertyBag1.put("QE_ServerDescription", new_database);<br />   oPropertyBag1.put("Database DLL", "crdb_oracle.dll" );<br />   oPropertyBag1.put("DSN", new_dsn);<br />   // Set new table logon properties attributes<br />   PropertyBag oPropertyBag2 = new PropertyBag();<br />   oPropertyBag2.put("Server", new_database);<br />   oPropertyBag1.put("QE_LogonProperties", oPropertyBag2);<br />   oConnectionInfo.setAttributes(oPropertyBag1);<br />   oConnectionInfo.setUserName(new_username);<br />   oConnectionInfo.setPassword(new_password);<br />   // The Kind of connectionInfos is CRQE (Crystal Reports Query Engine).<br />   oConnectionInfo.setKind(ConnectionInfoKind.CRQE);<br />   return oConnectionInfo;</p><p>  }<br /> public static void main(String[] args) {<br />  // TODO Auto-generated method stub<br />  new ReportSample();<br />  //String cmsName = "admin-42cdvir7e(2)";<br />  <br />  <br />  <br /> }<br /> </p><p>}<br /></p>

    <p>This issue can be  solved when you create the reports without needing to write any extra code.  I haven&#39;t tested this solution because I don&#39;t have any data to test it against.</p><p>First you want to make sure that you are using a UNICODE font which I&#39;m sure you are probably already doing.  Then to configure the "Right to Left" you can right click on any field and select "Format Text" or "Format Field".  You should see a "Paragraph" tab.  In there you can set the content to be "Left to Right" or "Right to Left".  The button on the right allows you to make this setting conditional on a parameter value or something like that.  I hope this helps. </p><p>Rob Horne<br /><a href="/blog/10">Rob&#39;s blog - http://diamond.businessobjects.com/blog/10</a></p>

Maybe you are looking for