How to transport particular files from "workcatalog" to "archivecatalog"

I only want to bring some paticular folders from a workcatalog into an archive catalog so this could look like :
workcatalog
folder a
subfolder with original files an catalog info
subfolder with exported jpegs
subfolder .......
folder b
sub b
sub b
sub b
once I finished a particular job I want to bring all the information from folder a (for example) into an archive catalog. So I don't want to bring the entire workcatalog into the archivecatalog
1 How do I transport only catalog info from folder a with the original files to my archive
2 Other subfolders like exported files and other information : I presume i just can bring them from one location to the other without any influence at the catalogs .....is that correct
thanks in advance
kast

thank you but some things don't turn out right.
ok i want to transport subfolder nef file a containing the raw and XMP files
after I imported the file in the archive catalog it looks like this
ok I imported the 5 files but the folder name is gone
and when i look at the physical place where I want to store my 'nef file a' folder , I find a lot of things that I don't need/want
archive folder
       file a
               foldername of the higher folder
                        file a
                              nef file a
               file a previews.irdata
               file a lrcat file
Obviously I do something wrong but I cannot find out what ????
kast

Similar Messages

How can I transfer files from my computer to my I pad ?

How can I transfer files from my computer to my I Pad?

Try a conduit such as Dropbox.
Goodreader or Documents to Go also have helper apps that allow transfers.
Goodreader is particularly good in that it has a integal file tree and you can mount your computers harddrive and navigate directly on your ipad.
Use the open with to view/move files into other apps.

How can I convert files from pages 08 files without pages 09?

I am extremely dissatisfied with the latest iWork (13?) applications. My 2008 MacbookPro crashed on me, so I purchased a new 15" MacbookPro last month. Due to a known issue that prohibits my new Mac from being restored from my Time Capsule backup (thanks, Apple...), we finally got it worked out so that all my files were restored, but I had to reinstall my applications as I could find them. I had iWork 09 on my old machine, but it was from a family pack years ago, for which I do not have the discs. So, now I don't have Pages 09 to convert all my older files (I had no legitimate reason to convert my graduate work from 08 because it all worked in '08 and '09) so that I can open all my .pages files in Pages. Why would Apple make Pages that cannot open .pages files?! This is quite frustrating, and I'm hoping someone has an answer for how to convert .pages files from iWork '08 so that I can open them in the latest Pages without having to purchase iWork '09 (AGAIN!). Apple is really ramping up its leaving people behind...

Those are your choices.
Buy iWork '09 which is a good solution or somehow reinstall Pages '08 so you can export to Word .doc/x files.
We warned long and hard that not updating to Pages '09 would eventually lead to Pages '08 being left behind, although Apple was particularly ruthless the way it finally did it.
Also that anything using Apple's proprietary formats is going to end up with the same fate.
Peter

How do I migrate files from MacBook running OS 10.4.11 to new MacBook Pro running OS 10.6? Thanks.

How do I migrate files from my MacBook (specs below) to my still in the box MacBook Pro running OS 10.6? Yesterday, I ran Software Update; it returned the message that all my software was up to date / no updates available.
I am particularly concerned with moving the 7000+ photos in iPhoto. I have photos organized into folders and albums and want to preserve this structure. I use this photo data as part of my lecture content.
Thanks for your help.
Best,
lauri with poodles
(the big standard poodles without the goofy Hollywood haircuts)
Specs - Old laptop
MacBook 13"
OS 10.4.11
2 Ghz Intel Core 2 Duo
2 GB 667 Mhz DDR2 SDRAM
112 GB total disk space
59 GB available
using iPhoto 6.0.6
Specs - New laptop
MacBook Pro 15"
OS 10.6
2.0GHz Quad-core Intel Core i7
4GB 1333MHz DDR3 SDRAM - 2 x 2 GB
128 GB Solid State Drive

Hi, Lauri. Welcome to Apple Support Communities.
http://web.me.com/pondini/AppleTips/Setup.html
From Ronda with Pomeranians.

How can automatic save file from apex to user local directory?

how can save pdf file from apex to user local directory on button click?

>
Welcome to the forum: please read the FAQ and forum sticky threads (if you haven't done so already), and update your profile with a real handle instead of "940509".
When you have a problem you'll get a faster, more effective response by including as much relevant information as possible upfront. This should include:
<li>Full APEX version
<li>Full DB/version/edition/host OS
<li>Web server architecture (EPG, OHS or APEX listener/host OS)
<li>Browser(s) and version(s) used
<li>Theme
<li>Template(s)
<li>Region/item type(s) (making particular distinction as to whether a "report" is a standard report, an interactive report, or in fact an "updateable report" (i.e. a tabular form)
With APEX we're also fortunate to have a great resource in apex.oracle.com where we can reproduce and share problems. Reproducing things there is the best way to troubleshoot most issues, especially those relating to layout and visual formatting. If you expect a detailed answer then it's appropriate for you to take on a significant part of the effort by getting as far as possible with an example of the problem on apex.oracle.com before asking for assistance with specific issues, which we can then see at first hand.
how can save pdf file from apex to user local directory on button click?As Tony points out the ability to do so would represent a major security breach. The normal approach is to present the user with a download link that when clicked prompts them with a Save dialog in which they can select a location for the downloaded file.
What is the source of the PDF file?

How can i store files from a PC on time capsule

How can i store files from a PC on Time Capsule

Actually although the format on the TC is not NTFS but Mac HFS+, that is irrelevant as far as windows is concerned. The TC offers SMB protocol to the network.. so how the TC stores the files is totally irrelevant.
1. TC is by nature not particularly SMB happy..
Change all names, TC and wireless to SMB compatible. Short, no spaces, pure alphanumeric.
Turn on the guest account to read write access.. assuming you don't have security issues.
Set the workgroup correctly.. don't use wins server.. no body does nowadays.
Note short no space names.. guest access and workgroup all set.
2. Download and install airport utility for windows or just bonjour for windows.. bonjour should be included with the full uitlity but that is not necessary.
3. Just doing the above when bonjour loads it should bring up TC as accessible.. if not, or you need to access it manually.. open windows explorer and type in the address bar.
\\TCName or \\TCIPaddress .. obviously replacing the generic name with the actual one used. In my case. as per the above screen shot. \\TCGen3
You will then see the main root directory of the TC.. data or whatever it is named..
Create a new directory under the root directory for your windows files.. and copy them there.
Note .. some issues can arise if you are using the TC for TM backups.. Please keep a large enough amount of free space available that TM still works.. pondini recommends using disk images.
http://pondini.org/TM/TCQ3.html
As long as you still have plenty of free space this is not an issue but TM may have issues when it fills the drive as it is designed to do.

How to store multiple files from SAp in to Application server?

Hi Guys,
             Can anybody tell me how to store multiple files from SAP into Application server.in my application i have to get the data from SAP tables BSEG , BKPF , BSAK and BSIK that to daily i have to do.
            Any Logic or Code for how to do is welcomed.
                    plz help me urgently.
Thanks,
Gopi

Hi,
directories creates basis. If you have task to store data in application server you already should have information into which folder you have to do it. If you don't have this information because it is just for example training for next task then you can use your personal folder into which you have access. To get list of all available folders please look at attached code and form get_directories (you get the list of folders you see in transaction AL11). But don't forget: If you are using open dataset you have to have rights to access application folder!
Here you are code which I use to upload text files from local disc into application folder
Regards,
Karol
*& Report FILE_PC_TO_SAP
REPORT FILE_PC_TO_SAP.
DATA: BEGIN OF searchpoints OCCURS 100,
        DIRNAME(200)     TYPE c, " name of directory.
        sp_name(100)     TYPE c," name of entry. (may end with *)
      END OF searchpoints.
DATA: BEGIN OF isearchpoints OCCURS 10,
        dirname(75) TYPE c,            " name of directory.
        aliass(75) TYPE c,            " alias for directory.
        svrname(75) TYPE c,            " svr where directory is availabl
        sp_name(75) TYPE c,            " name of entry. (may end with *)
        sp_cs(10)   TYPE c,            " ContainsString pattern for name
      END OF isearchpoints.
data: l_file type filetable.
data: l_rc   type i.
data: itab   type TABLE OF string.
data: g_tmp_file_path type rlgrap-filename.
data: wa_itab type string.
data: h_destin(100) type c.
data: dat      type string.
INITIALIZATION.
perform get_directories.
START-OF-SELECTION.
parameters: in_file type string OBLIGATORY LOWER CASE.
parameters: destin(100) type c OBLIGATORY LOWER CASE.
CALL FUNCTION 'GUI_UPLOAD'
EXPORTING
   FILENAME                      = in_file
   "FILETYPE                      = 'BIN'
   FILETYPE                      = 'ASC'
   HAS_FIELD_SEPARATOR           = ' '
   HEADER_LENGTH                 = 0
   READ_BY_LINE                  = 'X'
   DAT_MODE                      = ' '
TABLES
    DATA_TAB                     = itab
EXCEPTIONS
   FILE_OPEN_ERROR               = 1
   FILE_READ_ERROR               = 2
   NO_BATCH                      = 3
   GUI_REFUSE_FILETRANSFER       = 4
   INVALID_TYPE                  = 5
   NO_AUTHORITY                  = 6
   UNKNOWN_ERROR                 = 7
   BAD_DATA_FORMAT               = 8
   HEADER_NOT_ALLOWED            = 9
   SEPARATOR_NOT_ALLOWED         = 10
   HEADER_TOO_LONG               = 11
   UNKNOWN_DP_ERROR              = 12
   ACCESS_DENIED                 = 13
   DP_OUT_OF_MEMORY              = 14
   DISK_FULL                     = 15
   DP_TIMEOUT                    = 16
   OTHERS                        = 17.
IF sy-SUBRC <> 0.
write: / 'Error during loading input file!'.
ENDIF.
if h_destin is INITIAL.
h_destin = in_file.
endif.
CONCATENATE destin h_destin into dat SEPARATED BY '/'.
*TRANSLATE dat TO UPPER CASE.
OPEN DATASET dat FOR OUTPUT IN TEXT MODE ENCODING DEFAULT.
IF sy-SUBRC = 0.
loop at itab into wa_itab.
     TRANSFER: wa_itab TO dat.
endloop.
CLOSE DATASET dat.
write: / 'File uploaded!'.
ELSE.
write: / 'Not possible to open dataset'.
ENDIF.
at selection-screen on value-request for in_file.
perform select_input_file_name.
loop at l_file into g_tmp_file_path.
    move g_tmp_file_path to in_file.
    h_destin = ''.
    SPLIT g_tmp_file_path at '\' into table itab.
    loop at itab into g_tmp_file_path.
      h_destin = g_tmp_file_path.
    endloop.
endloop.
at selection-screen on value-request for destin.
DATA: lt_dfies    TYPE TABLE OF dfies.
DATA: lwa_dfies   TYPE dfies.
CALL FUNCTION 'DDIF_FIELDINFO_GET'
    EXPORTING
      tabname    = '/BI0/PCO_AREA'
      lfieldname = 'CO_AREA'
    IMPORTING
      dfies_wa   = lwa_dfies.
lwa_dfies-tabname = 'searchpoints'.
lwa_dfies-REPTEXT   = 'Destination directory'.
lwa_dfies-LENG      = 100.
lwa_dfies-INTLEN    = 100.
lwa_dfies-OUTPUTLEN = 100.
lwa_dfies-fieldname = 'SP_NAME'.
APPEND lwa_dfies TO lt_dfies.
CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
    EXPORTING
      RETFIELD = 'SP_NAME'
      DYNPPROG = SY-REPID
      DYNPNR = SY-DYNNR
      DYNPROFIELD = 'destin'
      VALUE_ORG = 'S'
    TABLES
      VALUE_TAB = searchpoints
      FIELD_TAB = lt_dfies
    EXCEPTIONS
      PARAMETER_ERROR = 1
      NO_VALUES_FOUND = 2
      OTHERS = 3.
*&      Form select_input_file_name
*       text
form select_input_file_name.
* call function 'F4_FILENAME'
*       exporting
*            program_name = sy-repid
*            dynpro_number = sy-dynnr
*            field_name    = 'PATH'
*       importing
*            file_name     = g_tmp_file_path.
CALL METHOD CL_GUI_FRONTEND_SERVICES=>FILE_OPEN_DIALOG
EXPORTING
WINDOW_TITLE = 'Please choose a file'
"default_extension = '*.TXT'
"default_filename = 'C:\*.txt'
initial_directory = 'C:\'
file_filter = '*.*'
CHANGING
FILE_TABLE = l_file
RC = l_RC
EXCEPTIONS
FILE_OPEN_DIALOG_FAILED = 1
CNTL_ERROR = 2
ERROR_NO_GUI = 3
NOT_SUPPORTED_BY_GUI = 4
OTHERS = 5.
IF SY-SUBRC <> 0.
    MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
    WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
endform.                    "select_input_file_name
*&      Form WRITE_DB_HOME
*       Write DB home directory
*       no parameters
FORM write_db_home.
CASE sy-dbsys(3).
    WHEN 'ORA'.
      CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_ORAHOME'
                         ID 'VALUE' FIELD searchpoints-dirname.
*--- C5056155 Start of ALV -------------------------------*
*      PERFORM flip_flop(rsora000) USING cflag.
*      WRITE: / 'DIR_ORAHOME',       30 searchpoints-dirname.
      MOVE: 'DIR_ORAHOME'        TO searchpoints-sp_name.
      APPEND searchpoints.
*--- C5056155 End   of ALV -------------------------------*
    WHEN 'ADA'.
      CALL 'C_GETENV' ID 'NAME' FIELD 'DBROOT'
                      ID 'VALUE' FIELD searchpoints-dirname.
*--- C5056155 Start of ALV -------------------------------*
*      PERFORM flip_flop(rsora000) USING cflag.
*      WRITE: / 'DIR_ADA_DBROOT',    30 searchpoints-dirname.
      MOVE: 'DIR_ADA_DBROOT'     TO searchpoints-sp_name.
      APPEND searchpoints.
*--- C5056155 End   of ALV -------------------------------*
    WHEN 'INF'.
      CALL 'C_GETENV' ID 'NAME' FIELD 'INFORMIXDIR'
                      ID 'VALUE' FIELD searchpoints-dirname.
*--- C5056155 Start of ALV -------------------------------*
*      PERFORM flip_flop(rsora000) USING cflag.
*      WRITE: / 'DIR_INF_INFORMIXDIR', 30 searchpoints-dirname.
      MOVE: 'DIR_INF_INFORMIXDIR' TO searchpoints-sp_name.
      APPEND searchpoints..
*--- C5056155 End   of ALV -------------------------------*
    WHEN 'DB6'.
      CALL 'C_GETENV' ID 'NAME' FIELD 'INSTHOME'
                      ID 'VALUE' FIELD searchpoints-dirname.
      IF sy-subrc = 0.
*--- C5056155 Start of ALV -------------------------------*
*        PERFORM flip_flop(rsora000) USING cflag.
*        WRITE: / 'DIR_DB2_HOME',    30 searchpoints-dirname.
        MOVE: 'DIR_DB2_HOME'       TO searchpoints-sp_name.
        APPEND searchpoints.
*--- C5056155 End   of ALV -------------------------------*
      ELSE.
        EXIT.
      ENDIF.
    WHEN OTHERS.
      EXIT.
ENDCASE.
ENDFORM.                    " WRITE_DB_HOME
FORM get_directories.
* get the name and aliases of ALL userdefined directories
SELECT * FROM user_dir INTO isearchpoints
    WHERE svrname = sy-uname.
    MOVE isearchpoints-dirname to searchpoints-dirname.
    MOVE isearchpoints-aliass to searchpoints-sp_name.
    APPEND searchpoints.
ENDSELECT.
SELECT * FROM user_dir INTO isearchpoints
    WHERE svrname = 'all'.
    MOVE isearchpoints-dirname to searchpoints-dirname.
    MOVE isearchpoints-aliass to searchpoints-sp_name.
    APPEND searchpoints.
ENDSELECT.
* Get DB home
IF sy-dbsys(3) = 'ADA'.
    PERFORM write_db_home.
ENDIF.
* get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_ATRA'
                     ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_ATRA'           TO searchpoints-sp_name.
APPEND searchpoints.
* get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_BINARY'
                     ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_BINARY'         TO searchpoints-sp_name.
APPEND searchpoints.
* get name of directory $DIR_CCMS
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_CCMS'
                     ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_CCMS'           TO searchpoints-sp_name.
APPEND searchpoints.
* get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_CT_LOGGING'
                     ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_CT_LOGGING'     TO searchpoints-sp_name.
APPEND searchpoints.
* get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_CT_RUN'
                     ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_CT_RUN'         TO searchpoints-sp_name.
APPEND searchpoints.
* get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_DATA'
                     ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_DATA'           TO searchpoints-sp_name.
APPEND searchpoints.
* Get DB home
IF sy-dbsys(3) = 'DB6'.
    PERFORM write_db_home.
ENDIF.
* get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_DBMS'
                     ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_DBMS'           TO searchpoints-sp_name.
APPEND searchpoints.
* get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_EXECUTABLE'
                     ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_EXECUTABLE'     TO searchpoints-sp_name.
APPEND searchpoints.
* get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_EXE_ROOT'
                     ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_EXE_ROOT'       TO searchpoints-sp_name.
APPEND searchpoints.
*get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_GEN'
                     ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_GEN'            TO searchpoints-sp_name.
APPEND searchpoints.
* get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_GEN_ROOT'
                     ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_GEN_ROOT'       TO searchpoints-sp_name.
APPEND searchpoints.
* get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_GLOBAL'
                     ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_GLOBAL'         TO searchpoints-sp_name.
APPEND searchpoints.
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_GRAPH_EXE'
                     ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_GRAPH_EXE'      TO searchpoints-sp_name.
APPEND searchpoints.
* get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_GRAPH_LIB'
                     ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_GRAPH_LIB'      TO searchpoints-sp_name.
APPEND searchpoints.
* get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_HOME'
                     ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_HOME'           TO searchpoints-sp_name.
APPEND searchpoints.
* Get DB home
IF sy-dbsys(3) = 'INF'.
    PERFORM write_db_home.
ENDIF.
* get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_INSTALL'
                     ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_INSTALL'        TO searchpoints-sp_name.
APPEND searchpoints.
* get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_INSTANCE'
                     ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_INSTANCE'       TO searchpoints-sp_name.
APPEND searchpoints.
* get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_LIBRARY'
                     ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_LIBRARY'        TO searchpoints-sp_name.
APPEND searchpoints.
* get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_LOGGING'
                     ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_LOGGING'        TO searchpoints-sp_name.
APPEND searchpoints.
* get name of directory with the files written by the memory inspector
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_MEMORY_INSPECTOR'
                     ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_MEMORY_INSPECTOR' TO searchpoints-sp_name.
APPEND searchpoints.
* Get DB home
IF sy-dbsys(3) = 'ORA'.
    PERFORM write_db_home.
ENDIF.
*get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_PAGING'
                     ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_PAGING'         TO searchpoints-sp_name.
APPEND searchpoints.
*get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_PUT'
                     ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_PUT'            TO searchpoints-sp_name.
APPEND searchpoints.
* get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_PERF'
                     ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_PERF'           TO searchpoints-sp_name.
APPEND searchpoints.
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_PROFILE'
                     ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_PROFILE'        TO searchpoints-sp_name.
APPEND searchpoints.
* get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_PROTOKOLLS'
                     ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_PROTOKOLLS'     TO searchpoints-sp_name.
APPEND searchpoints.
* get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_REORG'
                     ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_REORG'          TO searchpoints-sp_name.
APPEND searchpoints.
* get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_ROLL'
                     ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_ROLL'           TO searchpoints-sp_name.
APPEND searchpoints.
* get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_RSYN'
                     ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_RSYN'           TO searchpoints-sp_name.
APPEND searchpoints.
* calculate directory for saphostagent (no sapparam available...)
IF ( sy-opsys(3) = 'WIN' ) OR ( sy-opsys(3) = 'Win' ).
    DATA: windir_path(64), programfiles_path(64).
*   hoping that ProgramFiles is set in service user environment
    CALL 'C_GETENV' ID 'NAME' FIELD 'ProgramFiles'
                    ID 'VALUE' FIELD programfiles_path.
    IF programfiles_path IS INITIAL.
*     %ProgramFiles% not available. guess from windir
      CALL 'C_GETENV' ID 'NAME' FIELD 'windir'
                      ID 'VALUE' FIELD windir_path.
*     e.g. S:\WINDOWS ==> S:\Program Files
      CONCATENATE windir_path(3) 'Program Files' INTO programfiles_path.
    ENDIF.
    CONCATENATE programfiles_path '\SAP\hostctrl'
                                             INTO searchpoints-dirname.
ELSE.
*   on UNIX, the path is hard coded
    searchpoints-dirname = '/usr/sap/hostctrl'.
ENDIF.
MOVE: 'DIR_SAPHOSTAGENT' TO searchpoints-sp_name.
APPEND searchpoints.
* get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_SAPUSERS'
                     ID 'VALUE' FIELD searchpoints-dirname.
IF searchpoints-dirname = '.'.
    IF sy-opsys = 'Windows NT'.
      searchpoints-dirname = '.\'.
    ELSE.
      searchpoints-dirname = './'.
    ENDIF.
ENDIF.
MOVE: 'DIR_SAPUSERS'       TO searchpoints-sp_name.
APPEND searchpoints.
* get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_SETUPS'
                     ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_SETUPS'         TO searchpoints-sp_name.
APPEND searchpoints.
* get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_SORTTMP'
                     ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_SORTTMP'        TO searchpoints-sp_name.
APPEND searchpoints.
*get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_SOURCE'
                     ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_SOURCE'         TO searchpoints-sp_name.
APPEND searchpoints.
* get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_TEMP'
                     ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_TEMP'           TO searchpoints-sp_name.
APPEND searchpoints.
* get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_TRANS'
                     ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_TRANS'          TO searchpoints-sp_name.
APPEND searchpoints.
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_TRFILES'
                     ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_TRFILES'        TO searchpoints-sp_name.
APPEND searchpoints.
* get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_TRSUB'
                     ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_TRSUB'          TO searchpoints-sp_name.
APPEND searchpoints.
* get the name of the current server.
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'rdisp/myname'
                     ID 'VALUE' FIELD searchpoints-dirname.
data: h_ind type i.
LOOP AT searchpoints.
    h_ind = sy-tabix.
    IF searchpoints-sp_name IS INITIAL.
      DELETE searchpoints INDEX h_ind.
    ENDIF.
ENDLOOP.
ENDFORM.

How can i open file from adobe reader..i already have adobe read

how can i open file from adobe reader..i already have adobe reader installed and cannot open a
file and i cannot convert my file into pdf..

Is the file really a PDF? Where is it? Have you tried opening it from within Reader?

Anyone knows how to delete a file from a directory?????

hi there
anyone has any idea on how to delete a file from a directory? delete(String filename)? thank you.

Hi,
Check this link.
Gives you an example code to show how to delete a file.
http://examples.oreilly.com/jenut/Delete.java
Hope this helps.
Roopasri Vittal
Developer Technical Support
Sun Microsystems
http://sun.com/developers/support

How to transfer file from ipod touch to i tunes. i have files in my ipod , ut itunes is new so its telling if u sync the ipod all the files will be replaced but no files in the itunes.. so kindly help me how to transfer the files from i pod to itunesb

how to transfer file from ipod touch to i tunes. i have files in my ipod , ut itunes is new so its telling if u sync the ipod all the files will be replaced but no files in the itunes.. so kindly help me how to transfer the files from i pod to itunes......

Some of the information below has subsequently appeared in a document by turingtest2: Recovering your iTunes library from your iPod or iOS device - https://discussions.apple.com/docs/DOC-3991
Your i-device was not designed for unique storage of your media. It is not a backup device and media transfer was designed for you maintaining a master copy of your media on a computer which is itself properly backed up against loss. Syncing is one way, computer to device, updating the device content to the content on the computer, not updating or restoring content on a computer. The exception is iTunes Store purchased content.
iTunes Store: Transferring purchases from your iOS device or iPod to a computer - http://support.apple.com/kb/HT1848 - only media purchased from iTunes Store
For transferring other items from an i-device to a computer you will have to use third party commercial software. Examples (check the web for others; this is not an exhaustive listing, nor do I have any idea if they are any good):
- Senuti - http://www.fadingred.com/senuti/
- Phoneview - http://www.ecamm.com/mac/phoneview/
- MusicRescue - http://www.kennettnet.co.uk/products/musicrescue/
- Sharepod (free) - http://download.cnet.com/SharePod/3000-2141_4-10794489.html?tag=mncol;2 - Windows
- Snowfox/iMedia - http://www.mac-videoconverter.com/imedia-transfer-mac.html - Mac & PC
- iexplorer (free) - http://www.macroplant.com/iexplorer/ - Mac&PC
- Yamipod (free) - http://www.yamipod.com/main/modules/downloads/ - PC, Linux, Mac [Still updated for use on newer devices? No edits to site since 2010.]
- 2010 Post by Zevoneer: iPod media recovery options - https://discussions.apple.com/message/11624224 - this is an older post and many of the links are also for old posts, so bear this in mind when reading them.
Syncing to a "New" Computer or replacing a "crashed" Hard Drive - https://discussions.apple.com/docs/DOC-3141 - dates from 2008 and some outdated information now.
Copying Content from your iPod to your Computer - The Definitive Guide - http://www.ilounge.com/index.php/articles/comments/copying-music-from-ipod-to-co mputer/ - Information about use in disk mode pertains only to older model iPods.
Get Your Music Off of Your iPod - http://howto.wired.com/wiki/Get_Your_Music_Off_of_Your_iPod - I am not sure but this may only work with some models and not newer Touch, iPhone, or iPad.
Additional information here https://discussions.apple.com/message/18324797

Where can I find the Start up disk and how can I delete file from it.

where can I find the Start up disk on theMac Book Air?
How can I delete files from it?

The startup disk is the internal SSD in your MBA. You may delete files by draging the file to Trash (or clicking on them and then execute COMMAND+Delete). Then empty Trash.
Ciao.

How can I access files from a flash drive that were previously saved using a Windows computer? When I attempt to open the file on MacBook Pro, it is asking to "convert file to"; I also have Microsoft Word installed on the Mac as well.

How can I access files from a flash drive that were previously saved using a Windows computer? When I attempt to open the file on MacBook Pro, it is asking to "convert file to"; none of the options I choose work. I also have Microsoft Office (with Word) installed on the Mac as well.

Format the external drive as FAT32 or ExFAT. Both computers will then be able to read and write to it.

How to read the file from a folder.

Hi All,
How to read the file from a folder or directory from the non sap server / remote server.
Regards
Sathis

open dataset filename for input in text mode
encoding default.
filename is character type variable with the destination filename.
Edited by: Jino Augustine on Apr 19, 2010 1:31 PM

How do you delete file from time machine back up?

How do you delete file from time machine back up?

This from Apple KB Article If Time Machine is not in your Dock, you can enter Time Machine from the Menu Bar or System Preferences.
Deleting data from a Time Machine backup
To delete all backups of one or more items from a Time Machine backup, follow these steps:
Click the Time Machine icon on your Dock to enter the Time Machine restore interface.
Click on the item you would like to delete. Command-click to select multiple items.
Control-click (or right click) the highlighted item(s) and select "Delete All Backups of..." from the contextual menu, or select "Delete all backups of..." from the Action Item menu.
Authenticate with an administrator password when prompted.

How to send a file from FTP to external server

My requirement is to send a file from FTP to D3(External) server.
Now I am able to store the file in Appln server.
I want to send the file created by the program thru FTP to D3 server.
I know the username,Password,HostID,RFC destination details.
How to send the file from FTP to D3.
If u have any program,Plz send it...
I dont want the function modules name...I want the example code ....
Thanks in advance.

Hi Sumi,
You could do it so that you create a .bat or .cmd script to your server which does your ftp transfer.
To do this you must use sm69 to create a external operating system command which you can call from FM SXPG_COMMAND_EXECUTE. To SXPG_COMMAND_EXECUTE you the file you need to transfer as a parameter.
What happens is that your abap program passes the file to windows batch script (.bat .cmd) which will then do the transfer for you.
Here's a sample of ftp-script for windows:
echo open IP_ADDRESS_TO_YOUR_SERVER > c:zftp_transfer.ftp
echo USERNAME>> c:zftp_transfer.ftp
echo PASSWORD>> c:zftp_transfer.ftp
echo put YOUR_FILE>> c:zftp_transfer.ftp
echo quit>> c:zftp_transfer.ftp
ftp -s:c:zftp_transfer.ftp
also take a look here for more details:
http://support.microsoft.com/?kbid=96269
Ok, this might be a bit trivial but if your server is unix/aix etc.. Instead of using batch script you must do a shell script.
Regards,
Ville

How to transport particular files from "workcatalog" to "archivecatalog"

Similar Messages

Maybe you are looking for