How to transport Query from one client to another

There is a following query in XXX-010:
Queries of user group: UTILITY
Name: YWH_2
Is it possible to transport the same to XXX-020?
Could you please check and inform ASAP?
Regards,
M.R.Reddy

Hi M.R.Reddy,
please enter transaction SQ02, then at the menu Environment > Transports. This allows you to export/import infosets and/or queries and/or user groups between your systems. You can also do this "transport" just by downloading in your source system/client and uploading into the target one.
I hope it helps. Best regards,
Alvaro

Similar Messages

  • Transport sap query from one client to another client

    Hi,
    how to transport the sap query from one client to another client.
    Moderator Message: Basic Question
    Edited by: kishan P on Sep 15, 2010 3:39 PM

    use report "RSAQR3TR"
    Moderator Message: Do not answer such basic questions
    Edited by: kishan P on Sep 15, 2010 3:44 PM

  • How can I transport data from one client to another client?

    How can I transport data from one client to another client? 
    Regards,
    Subho

    hmmm, CTS = cutomizing transport?
    If you have a customizing table, there are still two possibilities.
    1. customize in DEV system and transport
    2. customize right there where you need it.
    this depends on how the maintainance view is built. If it is a simple customizing table and you get not asked for a TR when customizing a new record or changing an existing one, you hit possibility 2.

  • How to transport objects from one server to another server?

    How to transport objects from one server to another server.ie..from development to testing sewrver....

    Hi Manoj,
    Check these links
    http://help.sap.com/saphelp_nw2004s/helpdata/en/93/a3a74046033913e10000000a155106/frameset.htm
    http://help.sap.com/saphelp_nw2004s/helpdata/en/a8/5e56006c17e748a68bb3843ed5aab8/frameset.htm
    Transporting Objects IR ID using CMS
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/f85ff411-0d01-0010-0096-ba14e5db6306
    http://help.sap.com/saphelp_nw2004s/helpdata/en/e1/69a740aa053a13e10000000a155106/frameset.htm
    You can choose either File transfer methor or CMS. File transfer method is the simplest.
    Sachin

  • How to transfer file from one client to another client?

    hello,
    i have some questions and hope you all can help me..thanks a lot first..
    Here are the questions:
    i) How can i send a file from one client to another client using RMI?
    ii) Does the client(sender) need to send the file to server, then server save it and then send it to another client(receiver)?
    iii) If using RMI, a client can receive two files from same client(sender) or different client(sender) at a same time? how to do it? when both of the files come in from same port, how to differenciate them?
    iv) For your information, i am doing the File Transfer Server-client application which sender can send any file to other client. Can you give me any ideas? thanks..
    Last, thanks again..

    Your questions reflect some ambiguity in terms.
    "Client" and "server" are commonly used in two different senses:
    1. Technical sense: A client process makes requests, and a server process fulfills the request (provides a service).
    2. IT sense: A client computer (process) makes requests of a server (computer) process, and the server (computer) processes the request.
    In the first case, any computer might be a client, or a server, or both, depending on the processes being executed. In the second case, the computers are assigned some role.
    So: If you wanted to, you could implement client/server processes communicating between two peer computers, using RMI.
    This may not be what you wanted; if you really want to distinguish client and server computers, then the answer is that yes, you will probably put files into intermediate storage on the server computer.
    Finally, you probably do not have to worry about port conflicts if you use RMI; while the initial client server contact is established through a registry operating on a standard port, the actual RMI communications is established using random ports, one for each link.

  • How to transfer data from one client to another client

    Dear Experts,
    Please explain how to transfer data (Materials) from one client to another client?
    Thanks,
    Ajay Kumar

    Hi Ajay,
    Check any of below methods
    Refer thread http://scn.sap.com/thread/171981 where people use IDOCs for master data transfer.
    OR
    This is done by BASIS team, by client refresh or client copy. Check with your basis team for this and there is some predefined time when they plan this activity, and in most project they do it once in 3 months etc to get production environment in test system which helps to resolve issues of production by creating similar case in test system.
    Check below threads for more information
    http://sap.ittoolbox.com/groups/technical-functional/sap-basis/cleint-copy-vs-client-refresh-1377848
    http://basissap.blogspot.in/2008/05/what-is-client-copy.html
    OR
    You can download data from one client and upload in another through BDC or LSMW.
    Regards,
    Sharat

  • Transportation ( how to transport objects from one server to another)

    Hi BW guru's
    Please tell me the steps to transport objects from one server to another server.

    Follow the steps.
    1. RSA1 > Transport connection
    2. In the right window there is a catagory "all object according to type"
    3. Select required object you want to transport.
    4. Expand that object , there is select object, double click on this you will get the number of objects, select yours one.
    5. Continue.
    6. Go with the selection, select all your required objects you want to transport.
    7. There is icon Transport Object (Truck Symbol).
    8. Click that, it will creat one request, note it down this request.
    9. Go to Transport Organiser (T.code SE01).
    10. in the display tab, enter the Request, then go with display.
    11. Check your transport request whether contains the required objects or not, if not go with edit, if yes "Release" that request.
    Thats it, your cordinator will move this request to Quality or Production.
    Hope its helps.
    Regards

  • Transport abap query from one client to another--v--urgent---v----urgent

    hi,
    i have an abap query in one client and want to copy to another client.can i do this if so what are the steps involved .i tried the options like in query go to environment and then to transport .i also tried to do by running the programe RSAQR3TR.but it was transporting in the same client .i want to transfer into another client.plz help me out asap .

    hi,
    Create a request related to that Table Definition and add data content in the request like
    R3TR-TABL-<table name>
    R3TR-TABU-<table name>
    R3TR-TABD-<table name>
    and release the request
    Take the DATA files and CO files related to that request in a Pen drive and put the same into the new server DATA and CO files and import using STMS.
    For new program, it gets transported along with the program.
    For changed program (which has already been transported once), you need to include texts in transport request - just go to Selection texts, save them in the transport request and you're all set.
    whenever you assign a request number to the program
    and also the selection texts willbe stored under that request number
    so when u release the program
    the selection texts will also go
    after releasing the request if you change only the seleciton texts
    only the changes done to selection texts will reach the target
    and the rest of the things remain same
    so when ever you release a request all the things under that request
    will go

  • How to transport data from one tab to another(mapinfo)?

    Hello all,
    due to a change of design i have to transport datas from one
    spatial table to another in order to use them in mapinfo.
    How can i handle this with polygon datas?
    if i just do a simple "insert into tab select * from anothertab;
    all std datas are moved but the spatials generate errors while
    opening in mapinfo (illegal data type) any ideas or suggestions?
    Thanks i advance,
    Volker I. Lipper

    Hi,
    just a guess - maybe the necessary metadata is missing. I suggest
    you check the MAPINFO.MAPINFO_MAPCATALOG table for the
    appropriate entry (for "anothertab"). If there is no
    corresponding row, you need to make the table mappable in Mapinfo
    Pro first.
    Hope this helps,
    --- Hans.

  • How to copy query from one cube to another ? OR atlest a KF strecture?

    Hello edperts,
    just wanted some tips on coping a query or KF strecture from one cube to other . i am trying to use TCODE RSZC, but bcoz some of the chars. are not present in the target cube i a m not able to copy it.
    But, looks like both the cube has save KFs, so i thought atlest let me copy KFS , so i just have to pull manually chars. but thats also not working..
    Is there any back door way to do it ? please help me, it might save lots of time.
    Appreciated.

    Hi,
    Check the below article, it might help you out.
    [http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/204111a9-0fca-2d10-219c-be20e686cdb5?QuickLink=index&overridelayout=true]
    Regards,
    Durgesh.

  • Transports. (Copy as per transport request from one client to another)

    Iu2019ve enhanced the datasource 2lis_13_vditm with required fields in client 100. I removed hide check box for the fields and activated the datasource. Iu2019m maintaining three separate requests one for deactivation, second for activation and third for datasource modification.
    In order to reflect these changes to client 200, I run SCC1 and copied the requests from client 100 to client 200. Iu2019m wondering these changes are not reflecting into client 200. Still Datasource is inactive in client 200 and active in client 100.
    Advance thank you very much

    Hi Sharsha;
    Please run SCC1 and select "including Request Subtasks".
    Don't forget any transport request.
    Regards;
    Ricardo

  • How can I move particular users from one client to another client

    Hi, I am trying to find a way to move few or many user from one client to another. Is there a transaction available or program to move them. e.g. there is a SCC1 available to move transport only from one client to another without going through TMS.
    Is there any trick available ?
    thnx in advance

    closing this one. thnx

  • Transporting Course Catalog from one client to another

    Hi Experts,
    Can we transport LSO Course Catalog from one client to another or from development server to QA Server? If yes please somebody help me how to do that? Appreciate your efforts. Thanks
    Regards,
    FS

    Hi,
    You may use report RHMOVE30 and try creating a transport request manually.
    Use object type as course group (L) and type all of the course group numbers as object id.
    Then select evaluation path as L-D.
    Please try.
    Another option is to create an LSMW for creation of the course groups and types and the relationships between them.
    Regards,
    Dilek

  • How to transfer table data from one client to another client?

    How to transfer table data from one client to another client?

    Hi,
    Look at the Blog
    /people/community.user/blog/2007/01/07/transport-table-entries
    Regards
    Sudheer

  • How can I transfer sapscript from one client to another

    Please tell me the steps , how can I <b>transfer</b> SAPscript from one client to another (like DEV Client to Test Client)?

    Hi,
    Utilities --> Copy from client.
    If you have to copy from once system to another use Program RSTXSCRP
    Regards,
    Satish
    Message was edited by:
            Satish Panakala

Maybe you are looking for

  • Namespace replace/rename issue in ALSB

    Hi, As part of our project we have been using ALSB3.0. In one of our outbound Proxy flows we have configured transform stage which intern executing XQuery transormation. Post transformation it publish message on BEA JMSTopic in following format. *<?x

  • Adobe AIR in Flex browser application

    Hi, I have a browser based flex application developed. As a part of a requirement, some of information needs to be shown in an AIR app. Is there any possibility of fetching an AIR application from the flex application browser. Could you please provid

  • How do I add G-Mail to my home page?

    There is no set of options presented in Firefox 4 such as the ones in earlier versions. I would like to have front page apps such as G-mail, maps, etc. How do I do that?

  • Customize back button in alv

    Hi, I created a custom refresh button in alv. However when user clicks on this, it opens the refreshed data in a new window. When i click on back, it takes me to the previous window having my original data. I want that it should take me to the main s

  • I'd like to use Organiser part of Element 9 with my new Photoshop CC to manage my photographs, is this possible ?

    I'd like to use Organiser part of Element 9 with my new Photoshop CC to manage my photographs, is this possible ?. Photoshop CC seems to offer only the photo editing functions, with organiser I  can sort, tag and organise all of the photographs.