How to TRansport the new 4 entries of Z_VIEW??
Hi Experts,
I added 4 new entries in z_view, which delivary class is C - customising.
Now, I need to move these 4 entries to QA box.
So, how to do get it done? I tried, with Transport push button, but, am getting the error that, "Specified data is not allowed to TR"
thanq.
You can try if you are using table maintaince.
Check the below program :
Table diclaration
tables: tvdir.
Selection screento table View
selection-screen skip 2.
parameter p_tabnm(30) as listbox visible length 30 obligatory.
selection-screen skip 1.
selection-screen begin of block s1 with frame title text-001.
parameter: p_radio1 radiobutton group g1,
p_radio radiobutton group g1.
selection-screen end of block s1.
Add values to list box
at selection-screen output.
type-pools: vrm.
data: name type vrm_id,
list type vrm_values,
value like line of list.
name = 'P_TABNM'.
refresh list.
value-key = ' '. " Add your table or view name
value-text = text-002. " Add Table description.
append value to list.
call function 'VRM_SET_VALUES'
exporting
id = name
values = list.
start-of-selection.
Get flag of corresponding table view
select single tabname flag from tvdir into tvdir
where tabname = p_tabnm.
Set flag of corresponding table view
if p_radio1 eq 'X'.
if tvdir-flag ne 'X'.
update tvdir set: flag = 'X'
where tabname = p_tabnm.
endif.
endif.
if p_radio eq 'X'.
if tvdir-flag eq 'X'.
update tvdir set: flag = ''
where tabname = p_tabnm.
endif.
endif.
Execute View/Table
call function 'VIEW_MAINTENANCE_CALL'
exporting
action = 'U'
view_name = p_tabnm
exceptions
client_reference = 1
foreign_lock = 2
invalid_action = 3
no_clientindependent_auth = 4
no_database_function = 5
no_editor_function = 6
no_show_auth = 7
no_tvdir_entry = 8
no_upd_auth = 9
only_show_allowed = 10
system_failure = 11
unknown_field_in_dba_sellist = 12
view_not_found = 13
others = 14.
if sy-subrc <> 0.
message id sy-msgid type sy-msgty number sy-msgno
with sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
endif.
Reset flag of corresponding table view
update tvdir set: flag = tvdir-flag
where tabname = p_tabnm.
Just change the radio button and system will ask transport request.
Thanks
Seshu
Similar Messages
-
How to tracke the new entries in database table ?
Hi,
How to tracke the new entries in database table ? is there any FM or report is there to check it ?
regards
vishnuHi Vishnu,
u can write a report program for this and in that use the event :
AT NEW <field-name> ( use primary key)
your statements
ENDAT
for eg.
loop at itab ( herfe itab must be of type of table for which u want to track new entries)
at new matnr
write:/ new record
endat
endloop.
schedule this report in background to run in every 5 or 10 mins as per your requirement and hence changes can be tracked.
regards
Vinod -
How to transport the BW query's variable to BO webi report
Hi all
I'd like to know how to transport the BW query's variable to BO 's webi . today ,I created a sap customer varible in my bw system to get the max calmonth in the active table.The varible in the BW side run's well ,but I use this query to build a new univers ,and created a new webi report base on this univers ,but the question is the webi report can't get the varible's value I wann to know how to transport the bw varible value to BO webi report
Thanks and regards,
Peter .zhuI have changed my variaable in my bw query ,I found if you use SAP default variable it is ok in BO side . So I get a guidline by SAP default variable ,I changed my customer variable in variables edite ,don't use 'ready for input' .And then the variable can be useful in BO side .
Edited by: peter zhu on Jun 16, 2008 11:43 AM -
How to transport the data contains in the table from development to product
How to transport the data contains in the table from development to production.
Please let me know ASAP.Hello Dilip
Create a workbench request and add the following entries to the request:
Object key: R3TR TABU <name of z-table>
For this object add the following value key:
- client-independent table: '*'
- client-dependent table (e.g. client 100): '100*'
See also: [SAP Network Blog: Transport Table Entries|/people/community.user/blog/2007/01/07/transport-table-entries]
Regards
Uwe -
How To transport the Routines with UR
i HAVE THE ur WHICH I SELECTED from Object types in Transport connection now how to transport the routines
please tell what to select
soniyaHi Soniya,
If you have collected the UR, the routines would also get collected. You can verify this in the RSA1? Transport connection screen, or if you have assigned to a request, open up the request and see if you can see R3TR ROUT entries.
Hope this helps... -
Can you please how to retrive the new netprice from the new validity period
Hi,
When you display a contract using ME33K and you click on a item and view its conditions(shift+F6), there might be 2 validity periods for a given item.
and each period will have different netprice in it.
One will be old date before the PO was created and the other new one which has validity till 31.12.999..We want to fetch the netprice for the new validity date but currently the program is fetching this data from the table EKPO which is having the netprice of the old date only..
Can you please how to retrive the new netprice from the new validity periodThank you so much.
But I need more help specific to my problem.
Let me describe the same.
Suppose the PO creation date is 04.07.2007
The conditions for an item in a contract for the PO are as follows;
1. Validity from 04.07.2007 validity to 04.07.2007 Netprice = 100.00
2. Validity from 05.07.2007 validity to 31.12.9999 Netprice = 200.00
We need to always fetch the netprice from the validity period which always matches with the PO creatio date. here the value 100.00 should be the correct netpr as the PO creation date matches with the first validity period.
But the program is fetching the netprice 200.000 which belongs to the second validity period. That is beacuse the select statement which fetches the data for contracts collects on the basis of EKKO-kdate and ekko-kdtab.the fields kdate and kdtab retrieves the validity period of the contract which is from 04.07.2007 to 31.072007. This data is then used to retrieve the netpr data from EKPO and it fetched 200.00 as it retrives the netprice of current data in contract validity and h not with respect to PO creation date.
This data is then used to fetch the get the netpr data from EKPO.
<u>what we need is the netprice for that validity period of item(Conditions) that matches with the PO creation date</u>..
Below is the code where I'm selecting the data from ekko and ekpo for the contracts data..Can you please add the code snippet to the below attachesd subroutine to get the required data from KONV and KONP so that we can retrieve the correct Netprice.
FORM select_contracts USING p_s_cebeln LIKE s_cebeln[]
p_c_k_bstyp TYPE ebstyp
p_p_bukrs TYPE bukrs
p_p_ekorg TYPE ekorg
p_p_ekgrp TYPE bkgrp
*Begin of Mod-004
fp_p_cernam type ty_r_ernam
p_p_cernam TYPE ernam
*End of Mod-004
p_s_werks LIKE s_werks[]
p_s_matnr LIKE s_matnr[]
p_s_lifnr LIKE s_lifnr[]
p_s_val_dt LIKE s_val_dt[].
*mod-002
data : l_amount type BAPICURR_D, " Net price
l_waers TYPE waers, " Currency Key
l_eff_amount type BAPICURR_D. " Effective value
data: l_v_netpr type bprei.
*mod-002
SELECT ebeln
bukrs
bstyp
aedat
ernam
lifnr
zterm
ekorg
ekgrp
waers
wkurs
<b>kdatb
kdate</b>
inco1
INTO TABLE i_ekko
FROM ekko
WHERE ebeln IN p_s_cebeln
AND bstyp EQ p_c_k_bstyp
AND bukrs EQ p_p_bukrs
AND ekorg EQ p_p_ekorg
AND ekgrp EQ p_p_ekgrp
*Begin of Mod-004
AND ernam EQ p_p_cernam
AND ernam IN fp_p_cernam
*End of Mod-004
AND lifnr IN p_s_lifnr
AND ( kdatb IN p_s_val_dt OR kdate IN p_s_val_dt ).
IF sy-subrc EQ 0.
Populates internal table i_ekpo using EKPO table.
SELECT ebeln
ebelp
loekz
txz01
matnr
werks
ktmng
menge
meins
bprme
netpr
peinh
webaz
mwskz
uebto
untto
erekz
pstyp
knttp
repos
webre
konnr
ktpnr
ean11
effwr
xersy
aedat
prdat
INTO TABLE i_ekpo
FROM ekpo
FOR ALL ENTRIES IN i_ekko
WHERE ebeln = i_ekko-ebeln
and aedat = i_ekko-aedat
AND werks IN p_s_werks
AND matnr IN p_s_matnr.
LOOP AT i_ekpo INTO rec_ekpo.
MOVE rec_ekpo-ebeln TO rec_contr-ebeln.
MOVE rec_ekpo-ebelp TO rec_contr-ebelp.
MOVE rec_ekpo-loekz TO rec_contr-loekz.
MOVE rec_ekpo-txz01 TO rec_contr-txz01.
MOVE rec_ekpo-matnr TO rec_contr-matnr.
MOVE rec_ekpo-werks TO rec_contr-werks.
MOVE rec_ekpo-ktmng TO rec_contr-ktmng.
MOVE rec_ekpo-menge TO rec_contr-menge.
MOVE rec_ekpo-meins TO rec_contr-meins.
MOVE rec_ekpo-bprme TO rec_contr-bprme.
MOVE rec_ekpo-netpr TO rec_contr-netpr.
move l_v_netpr TO rec_contr-netpr.
mod-002
read table i_ekko into rec_ekko with key
ebeln = rec_ekpo-ebeln.
l_waers = rec_ekko-waers.
CALL FUNCTION 'BAPI_CURRENCY_CONV_TO_EXTERNAL'
EXPORTING
currency = l_waers
amount_internal = rec_contr-netpr
IMPORTING
AMOUNT_EXTERNAL = l_amount.
rec_contr-netpr = l_amount.
mod-002
MOVE rec_ekpo-peinh TO rec_contr-peinh.
MOVE rec_ekpo-webaz TO rec_contr-webaz.
MOVE rec_ekpo-mwskz TO rec_contr-mwskz.
MOVE rec_ekpo-uebto TO rec_contr-uebto.
MOVE rec_ekpo-untto TO rec_contr-untto.
MOVE rec_ekpo-erekz TO rec_contr-erekz.
MOVE rec_ekpo-pstyp TO rec_contr-pstyp.
MOVE rec_ekpo-knttp TO rec_contr-knttp.
MOVE rec_ekpo-repos TO rec_contr-repos.
MOVE rec_ekpo-webre TO rec_contr-webre.
MOVE rec_ekpo-konnr TO rec_contr-konnr.
MOVE rec_ekpo-ktpnr TO rec_contr-ktpnr.
MOVE rec_ekpo-ean11 TO rec_contr-ean11.
MOVE rec_ekpo-effwr TO rec_contr-effwr.
mod-002
CALL FUNCTION 'BAPI_CURRENCY_CONV_TO_EXTERNAL'
EXPORTING
currency = l_waers
amount_internal = rec_contr-effwr
IMPORTING
AMOUNT_EXTERNAL = l_eff_amount.
rec_contr-effwr = l_eff_amount.
*mod-002
MOVE rec_ekpo-xersy TO rec_contr-xersy.
APPEND rec_contr TO i_contr.
CLEAR: rec_ekpo,rec_contr.
mod-002
CLEAR : rec_ekko,l_amount, l_eff_amount,l_waers.
mod-002
ENDLOOP.
Modifying i_contr using i_ekko.
SORT i_ekko BY ebeln.
LOOP AT i_contr INTO rec_contr.
READ TABLE i_ekko INTO rec_ekko WITH KEY
ebeln = rec_contr-ebeln
BINARY SEARCH.
MOVE rec_ekko-bukrs TO rec_contr-bukrs.
MOVE rec_ekko-bstyp TO rec_contr-bstyp.
MOVE rec_ekko-aedat TO rec_contr-aedat.
MOVE rec_ekko-ernam TO rec_contr-ernam.
MOVE rec_ekko-lifnr TO rec_contr-lifnr.
MOVE rec_ekko-zterm TO rec_contr-zterm.
MOVE rec_ekko-ekorg TO rec_contr-ekorg.
MOVE rec_ekko-ekgrp TO rec_contr-ekgrp.
MOVE rec_ekko-waers TO rec_contr-waers.
MOVE rec_ekko-wkurs TO rec_contr-wkurs.
MOVE rec_ekko-kdatb TO rec_contr-kdatb.
MOVE rec_ekko-kdate TO rec_contr-kdate.
MOVE rec_ekko-inco1 TO rec_contr-inco1.
MODIFY i_contr FROM rec_contr.
ENDLOOP.
ENDIF.
REFRESH: i_ekko,
i_ekpo.
CLEAR : rec_ekko,
rec_ekpo,
rec_contr.
ENDFORM. "select_contracts
Thanks. -
How To Create The New VO in Standered Page?
Hi Gurus,
Pl z help me how to create the new Custom VO in slandered page,and how to attach that VO in custom RN in all are slandered page only.
Regards,
SriniHi Sara,
<i>1. Could you please tell me how to create the new webservice in XI?</i>
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/5f3ee9d7-0901-0010-1096-f5b548ac1555
<i>2. What tools we have to use to create it.?</i>
/people/community.user/blog/2006/09/19/xi-webservice-studio--a-plain-jane-soap-tool
http://www.gotdotnet.com/Community/UserSamples/Details.aspx?SampleGuid=65a1d4ea-0f7a-41bd-8494-e916ebc4159c
Altova is also a good option
<i>3. How to send the SOAP request to XI?</i>
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/d23cbe11-0d01-0010-5287-873a22024f79
SAP Note 856597
An Add-on
/people/siva.maranani/blog/2005/03/01/testing-xi-exposed-web-services
Regards,
Prateek -
Where do I find a tutorial about how to use the new iTunes? I have version 11.1.3 (8). I looked on the Apple web site but only found info extolling the virtues of iTunes, not how to use it.
Use it the same way as previously.
ctrl B shows the menus.
ctrl S shows the sidebar.
What else do you need help with? -
Visa has changed for the purchase of Apple products, i did not know how I put the new MasterCard number to finish the process of buying products Thank you
i have ibad mini
and iphone4
laptop sony
can you sent for me the anserChanging Account Information > http://support.apple.com/kb/HT1918
-
How to insert the new field to standard scheduling agreement script form.
Hi Gurus,
how to insert the new fields to standad sheduling agreement script form. its a need for me, i want to display the AEDAT field in scheduling agreement form ,
The below one is my requirement,
ex:- Itu2019s requested the change of Scheduling Agreement printout. Itu2019s requested for this type of document, the insertion, into the field u201CData Emissionu201D into the print, of the document last modify date instead of the document creation date. (This change will be done only for position change into the Scheduling Agreement). No change into the PO.
Change SAPSCRIPT printout. Introduction, into the Scheduling Agreement, of last modified
document date (field EKPO-AEDAT).
Thanks & Regards
chinnuopen TNAPR table and give the output type you need to modify.... get the print program name and check if some structure already have the date you wanted... if you have it already... then open the form in SE71 tr. and provide the strcuture name - feild in the position you want to have the date...
se71--->
&<str. name>-AEDAT& -
Hello all,
when i update apps on my iphone they need the ID that i used when i downloaded these apps and i forgot this ID and a make a new ID
How i used the new one to update these apps?
thanksYour device can hold apps from multiple IDs, but to update them you have to swicth identities which is time consuming. If possible use only the one ID. If you need to reset the password for your old ID visit My Apple ID.
tt2 -
How to stop the new Photos.app opening every time I put in a new device?
How to stop the new Photos.app opening every time I put in a new device?
It's annoying as i use bridge to do all my photo organising.Insert or attach a device then let Photos load. Then uncheck the box indicated:
-
How to stop the new health application from Count the steps/ woking background?
how to stop the new health application from Count the steps/ woking background?
I really need your helpI agree with Mr. Hall that using mx.controls.Alert in Flex may be a better route.
Show the Alert like this:
// show an alert with a question and yes and no choices
Alert.show( "Would you like to go to the Adobe Forums?", "Question",
Alert.YES | Alert.NO, this, closeHandler, null, Alert.YES );
Then handle the response in the closeHandler() function:
protected function closeHandler( closeEvent:CloseEvent ):void
if( event.detail == Alert.YES )
navigateToURL( new URLRequest('http://forums.adobe.com'), '_self' );
else if( event.detail == Alert.NO )
// they chose no
The following documentation on Alerts may be helpful:
http://www.flexafterdark.com/docs/ActionScript-Alert
Let me know if that helps...
Ben Edwards -
How to add the new tab in Quotation VA21
Hi,
How to add the new tab after Addition data B in line item in Quotation VA21?
Please help me for this query.
DevendraDear Devendra,
Use the program SAPMV45A & the screen number provided by SAP is 8459.If you activate this screen and include the screen in 4462.
PROCESS BEFORE OUTPUT.
* Verarbeitung vor der Ausgabe
MODULE VBAP_BEARBEITEN_VOR.
CALL SUBSCREEN KUNDEN-SUBSCREEN_8459 INCLUDING 'SAPMV45A' '8459'.
PROCESS AFTER INPUT.
* Verarbeitung nach der Eingabe
* Hier weitere Prüfungen
CALL SUBSCREEN KUNDEN-SUBSCREEN_8459.
Regards,
Anand -
How to call the new page in smartforms
Hi friends,
How to call the new page in smartforms.
Thanks,
RaviHi,
Create a command node and click the 'Go to new page' check box specifying the page u want to go.
You can enter your condition for which it should branch to a new page in the 'conditions' tab.
Regards
Shiva
Maybe you are looking for
-
Hi everyone, While opening a form in one of the Oracle Retail applications the error: FRM:41067-Cannot find Menu Item:Invalid ID is thrown. However when we click OK, the error goes off and system lets us to continue with using the form. On another fo
-
Hi all , Iam Generating ALV Grid using OOPs method, In the output list Iam editing some of the entries , now i need to store the edited output in a custom table. Can anyubody tell me how to capture these changes into an internal table. Early replies
-
Hi, We have condition ZHDL handling charges in m/06, which is maintained for " manual entry has priority" & maintained for header aswell as for line item. When ZHDL entered in two line items for different vendor, one line item show "Inactive due to m
-
hey, i have iphone 3gs. and after i opened it now white screen. i iphone itself works it recieve calls but the screen is white. i'm almost sure that i didn't cause damage to internal parts and cables. restire can solve the problem? or should i buy ne
-
Is anyone aware of any free management packs for McAfee ePO and VSE ? Running SCOM 2007 R2.