How to transport the planning folders in bw bps 3.5?

Hi all,
I have created a planning folder and i happened to see the transport folder is been grayed out in the tcode - UPSPL.
Pls guide me on how to transport planning folder in bw bps 3.5?
Thanks
Pooja

Hi all,
I have solved the issue. It was greyed out because i had opened 2 parallel sesison for the same planning folder.
Thanks
Pooja

Similar Messages

  • How to Transport a planning book to another system

    Hello,
    Can someone please let me know how to transport a planning book to another system?
    Thanks for your time.
    Sarath.

    Dear Sarath,
    Transporting Macro Books:
    You can add macro books to a transport request so that they are transported to the target system(s) when the request is released. When you transport a macro book, the system exports relevant notes directly to the target system. For this, you must specify the relevant RFC destination.
    To be able to use macro books in another system, you need to have already exported other objects such as the relevant planning object structures and planning areas to the target system. You do this in Customizing for Demand Planning or Supply Network Planning under Basic Settings -> Maintain Manual Transport Link for DP/SNP. You can also use this activity to transport macro books. If the planning area does not exist in the target system, you can transport the macro book, but you cannot open the macro book or use the macros.
    To transport a macro book, select the book and choose Tools -> Transport Macro Books. On the dialog box that appears, enter an existing transport request or create new one. The transport request determines the system to which the macro book is transported. Choose Enter.
    Regards,
    Naveen.

  • How to transport the BW query's variable to BO  webi report

    Hi all
    I'd like to know how to transport the BW query's variable to BO 's webi . today ,I created a sap customer varible in my bw system to get the max calmonth in the active table.The varible in the BW side run's well ,but I use this query to build a new univers ,and created a new webi report base on this univers ,but the question is the webi report can't get the varible's value I wann to know how to transport the bw varible value to BO webi report
    Thanks and regards,
    Peter .zhu

    I have changed my variaable in my bw query ,I found if you use SAP default variable it is ok in BO side . So I get a guidline by SAP default variable ,I changed my customer variable in variables edite ,don't use 'ready for input' .And then the variable can be useful in BO side .
    Edited by: peter zhu on Jun 16, 2008 11:43 AM

  • How to transport the data contains in the table from development to product

    How to transport the data contains in the table from development to production.
    Please let me know ASAP.

    Hello Dilip
    Create a workbench request and add the following entries to the request:
    Object key: R3TR TABU <name of z-table>
    For this object add the following value key:
    - client-independent table: '*'
    - client-dependent table (e.g. client 100): '100*'
    See also: [SAP Network Blog: Transport Table Entries|/people/community.user/blog/2007/01/07/transport-table-entries]
    Regards
      Uwe

  • How to transport the text elements in  Reports?

    need answer to this question.
    how to transport the text elements in the reports?
    Edited by: venkata kumar on Feb 18, 2008 1:33 PM

    Hi Venkata,
    Text Elements are a component/part of the SAP script and are not individual ABAP objects within the SAP environment hence they cannot be transported independently.
    You would need to make changes in your text elements in the SAP script which would result in the SAP script being saved under a transport and moving the transport across the landscape would result in the text elements also getting transported.
    In short: Move SAP script - to move text elements.
    Cheers,
    Aditya

  • Performace and how to read the plan

    Hi all, i am having some problem with a query. i cannot really read the explain plan. here it is
    VIEW of "LOT" #4 (Cost=559,177 Card=35,277,895 bytes=30,868,158,125)
      UNION-ALL
         HASH JOIN (Cost=558,852 Card=34,981,759 bytes=9,794,892,520)
            TABLE ACCESS (FULL) of "ENT" #27 Optimizer=ANALYZED (Cost=13 Card=6,214 bytes=267,202)
            HASH JOIN (Cost=541,331 Card=34,981,759 bytes=8,290,676,883)
               TABLE ACCESS (FULL) of "SMASTER" #28 Optimizer=ANALYZED (Cost=573 Card=282,970 bytes=17,261,170)
               HASH JOIN (Cost=459,945 Card=34,981,759 bytes=6,156,789,584)
               INLIST ITERATOR
                   TABLE ACCESS (BY INDEX ROWID) of "INTERFACES" #29 Optimizer=ANALYZED (Cost=2 Card=5 bytes=100)
                       INDEX (RANGE SCAN) of "INTERFACES_INDX1" UNIQUE Optimizer=ANALYZED (Cost=1 Card=1 bytes=)
               HASH JOIN (Cost=457,468 Card=153,919,741 bytes=24,011,479,596)
               TABLE ACCESS (FULL) of "POS" #25 Optimizer=ANALYZED (Cost=1,819 Card=5,756,878 bytes=132,408,194)
               TABLE ACCESS (FULL) of "L_POS" #26 Optimizer=ANALYZED (Cost=179,932 Card=153,840,627 bytes=20,460,803,391)
      TABLE ACCESS (FULL) of "HOLD" #31 Optimizer=ANALYZED (Cost=325 Card=296,136 bytes=40,866,768)can somebody tell me what is happening. what steps gets executed first then next and next, etc? it looks like the cost is a lot and this is hurting the performance.
    i know tuning involved a lot such as stats, index use, # of rows, etc.
    what i am looking for here is how to read the plan, any idea what this is doing? please explain. also any recommendation to improve the plan base on the plan above. thanks

    A quick search in google for oracle reading explain plan
    Top hits are very nice writeups...
    http://www.akadia.com/services/ora_interpreting_explain_plan.html
    http://download.oracle.com/docs/cd/B19306_01/server.102/b14211/ex_plan.htm
    vr,
    Sudhakar B.

  • Using attribute variables in the planning folders

    Hi all,
    Is there way to use attribute variables in the planning folders?
    There is a following situation. We have a number of cost centers (0COSTCENTER). Cost center has responsible person (0RESP_PERS) as attribute.
    We planning some costs for cost center.
    To select certain cost center to cost planning we created
    variable ZVAR1 as type CHAR and placed this variable in the header of planning folder.
    Now we have to restrict list of cost center for selection according to selected responsible person.
    Of course, I can add 0RESP_PERS to my cube, create variable ZVAR2 as type CHAR based on this character. Then place this variable to folder. For variable ZVAR1 use type of replacement as "User Exit" and ABAP routine will restrict list of available cost centers based on value of ZVAR2.
    But... Is there way to use variable with type of attribute and place this variable to header of folder?
    Thanks in advance!

    Hi Dmitry,
        Yes, you can use the attribute variable in your folder.
        Just create attribute variable with 0COSTCENTER as the basic char and 0RESP_PERS as attribute.then when you create your folder with UPSPM, make sure to choose notweb-enable type then under the variable category you will see the the attribute vairable you just created at BPS0, just drug it to you folder, you are done.

  • How To transport the Routines with UR

    i HAVE THE ur WHICH I SELECTED from Object types in Transport connection now how to transport the routines
    please tell what to select
    soniya

    Hi Soniya,
    If you have collected the UR, the routines would also get collected. You can verify this in the RSA1? Transport connection screen, or if you have assigned to a request, open up the request and see if you can see R3TR ROUT entries.
    Hope this helps...

  • How you refresh the planning application

    how you refresh the planning application ? what is an enhanced calculation script?

    Is this for an exam or interview?
    Cheers
    John
    http://john-goodwin.blogspot.com/

  • How to transport the  text elements

    hi guru's,
      i need answer to this question.
      how to transport the text elements in the sap script?

    Hi,
    U mean Standard Text?
    Standard Text can create using SO10.
    Use RSTXTRAN Standard Program..
    Do Like this..
    Goto se38 and enter program name as RSTXTRAN
    and press F8..
    and give Text-key Name as Standard Text Name
    then Press F8..
    And select Select check box.. and enter
    and press on trsfr to corr button..
    it asks transfee textxs to a correction..
    press on yes button..
    it will show request number or create your own request...
    and after goto SE10 tcode and Transport it...
    Regards,
    KK

  • How to transport the Holiday Calendar.

    HI Experts,
    How to transport the Holiday Calendar.
    Actually the "Transport" option in menu bar is showing but it is disabled.
    Please advise.
    Regards,
    Tomesh

    Hi Tomesh,
    Once you created the holiday calender, you have to click on the transport icon which can be displayed at the left top of the scree "SCAL" transaction.
    Once you click on the transport icon with " truck symbol " then only all the holidays and holiday calender will be moved to the target system.
    Try this and let me know the feedback.
    Hope it will sort out your issue.
    Regards,
    Azish

  • How to view the planned orders in mass and how to delete in mass

    Hi gurus,
    How to view the planned orders in mass and how to delete in mass.
    Regards
    R.Rajakarthik

    Hi,
    Use the collective display of planned orders, transaction code MD16.
    You can select the data by different options and choose which ones or all that you need to delete.
    Click the Delete button to trash them.
    This will delete planned orders without deleting the planned independent requirements and sales orders.
    Hope it helps

  • How to transport the translated script?

    how to transport the translated script?

    HI,
    First log on to your target client.
    Go to SE71 initial screen.
    Here go to Utilities --> Copy from Client..
    now u will get a screen from where u can copy the form form source client to current client...
    OR u can do the following
    you can use the tcode scc1 in the target cleint so as to copy from the developed cleint.  Then you need to give in the request number only and click on start immediately.
    Hope this helps

  • How to transport the validations, assignments, named searches, and workflow

    Hi Experts
    How to transport the validations, assignments, named searches, and workflow
    between two repositories.
    Thanks
    Vickey.

    Hi Vickey,
    In MDM 5.5 you can use the Archive /Unarchive option for it
    You can refer the below link:
    https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/20751e78-f81f-2a10-228f-eb3a16421b4d(Export/Import Schema)
    Note:Export/Import schema can also be used for Transportation in MDM however as of MDM 5.5 the maps,validations and workflows cannot be transported.
    From MDM 7.1 version onwards you can use the Export/Import Schema as well
    You can refer the below link:
    https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/d0dd1ae0-36e5-2b10-f8b4-e6365e643c0b
    Hope It Helped
    Thanks & Regards
    Simona Pinto

  • How to remove the Planned leave from the LOV of Absence status? Only confirmed leave should be listed. for 11i instance.

    Hi Gurus,
    How to remove the Planned leave from the LOV of Absence status? Only confirmed leave should be listed. for 11i instance.
    Thanks
    Shobhit Shukla

    Hi Shobhit,
    Please personalize the self-service page and make that field non-updatable with default value "Confirmed".
    Thanks,
    Avinash

Maybe you are looking for

  • How should I set GPG to use with KMail or even rather Thunderbird?

    In the last 3 hours I tried to set Thunderbird (Enigmail) and KMail to use my GPG key. I failed. I made the keypairs with Kgpg, installed enigmail, restarted the Thunderbird, set everything, but TB didn't asked for password, only gave an error messag

  • Browser freezes only on MacBook

    I have a unique problem.  Recently (possibly during a power-loss) my wife's MacBook started freezing while browsing.  My Macbook Pro and Mini can sit right beside her MacBook and work perfectly -- log in through the airport express and router and bro

  • When i connect my WD hard drive 3.0 usb in my macbook pro it freezes

    A line starts to come down in the whole screen and in the middle it tells me to hold down the power bottom to restart it. What is happening? Could it be the format that i'm running the HD? I'm using  the format MS-DOS (FAT) because in my other HD (al

  • Another Sorting Question!

    Ok, I already asked something like this, but I was unsure about what to do. But now I know. I want to create a linked list of items. each item has a String and an int. in a different class, i want to create a linked list of these items, inserted in r

  • WSDL Data as Data type

    Here is the scenario, I have the WSDL file which has the structure and uploaded as external objects and I need to define a data type for this structure, Can anyone give an idea how can we use the above Scema as data type that has been downloaded to