How to Transport Variance Forms and Reports(created in KKO4 and KKO1)
Hello Experts,
I searched for the following but could not find matching answer.Will you, therefore, suggest on the following
1. I created form in KKO4/5
2. Then I created report under above form in transaction KKO1
I did above in development and now need to transport it to quality and then to production after testing
When I select menu Form -> Transport in KKO5, system prompts for customizing request.
Which options(subobjects) should I select? should I select Key figures ( I used standard available key figures in form defination)
After above customizing request for form, I selected menu Report -> Transport in KKO2 to transport the report. It prompted for subobject selection
(a) Report defination (This is by default selected and greyed out),(b) Report form, (c) Key figures , (d) Transport all languages
Which subobjects should be selected out of above.
After above selection for reports, system is prompting for workbench request creation, during WB request creation system is also giving 'prompt for customizing request' creation and by default displaying customizing request created for Form. Should such customizing requiest be part of WB request?
Secondly, I have created 8 forms and more than one report under of the these forms. Should the menu Form/Report -> Transport be selected for each form/report in same transport request? Is only that particular form/Report included in the Transport Request or does it include all existing/standard forms/reports also in transport request.
Your earliest help is greatly appreciated. Thank you in advance
Hi Jose
Thank you very much for the reply
Could you please elaborate on "if any configuration maintained at
sub-objects level"
What I am worrying about is my transport request should not overwrite anything in quality and production systems. It should take only forms and reports that I add/select in it.
I am following the below steps Please correct me if I am going wrong
1) Create new formS in KKO4
2) Create one or more reportS in KKO1 under each of above forms
3) In KKO5 (report painter: Change From screen), select the form that I created in step (1), select menu Edit->Transport form, I get the pop up to select the dependent objects for form. Here I select sub object - Form/Layout, Key Figures, Transport All Languages. On choosing Enter, I get pop up "Prompt for customizing request”. I create new request
4) In KKO5 I select second form I created in step (1) and follow the activities mentioned in step (3) but select the same customizing request. This way I add all the form I created in one customizing request
5) In KKO2, select the report that I created in step (2) select menu Report -> Transport I get pop up selection of Dependent objects for Report. Here I select sub object – Report Definition, Report Form, Key Figures, Transport All Languages. On choosing Enter, I get pop up "Prompt for workbench request. I create new request. When I choose enter on this pop up system automatically gives pop for "Prompt for customizing request” and by default displays cust. request created in step (3). Should I select Continue/Enter here?
And Does it mean both customizing and WB request are clubbed?
What is the sequence of transporting them?
Thank you in advance
Regards
Anand
Similar Messages
-
How to call a form from report? in 6i
How to call a Form from Report? In Developer 6i of oracle. Plz tell me tex.
try this
declare
AppID PLS_INTEGER;
begin
AppID := DDE.App_Begin('ifrun60 module=myform.fmx userid=scott/tiger@mydb maximize=no', DDE.App_Mode_Maximized);
exception when others then
srw.message(1,'Errror');
end;Baig
[My Oracle Blog|http://baigsorcl.blogspot.com/] -
Whats are the Forms and Reports in QM?and what is differece betwwen them?
whats are the Forms and Reports in QM?and what is differece betwwen them?
Hi,
1. Forms are like templates.Forms define the text format and page layout of documents, which can be formatted (in accordance with the definitions) for display on the screen or for output to a printer.
2. Executable program that allows users to read and evaluate data in the database.
You can either display the output of a report on the screen or send it to a printer. You can also save it, so that it can be displayed as often as you like. It is important to be able to do this, because reading large volumes of original data can impair performance.
Examples of reports are ABAP reports, queries, and drilldown reports.
In short, forms are only templates and reports will retrive the data from system in certain format.
Vishal -
If I want to fill out estimates and have created a fill and sign form;
If I want to fill out estimates and have created a fill and sign form; do I have to access formscentral everytime or is there a way to save the fill and sign form that is readable on my tablet?
The clouds you see next to your music on the device and iCloud are two different things. When your music is not on your device it is in iTunes in the Cloud. Not the same thing as iCloud which is used to sync information between devices and house backups of your device contents. So that little cloud you see next to your songs is telling you that the music is not on your device. That's why it is giving you the message - because when you click on it, it is attempting to download it to your device.
What may have happened is when you imported your photos to the PC, you may have sync'd your device via iTunes, and you did not have the Sync Music option checked in your device Profile screen.
Hook up your device to your PC and open iTunes. Make sure the sidebar is showing (Control+S if you cannot see the sidebar with Devices listed), and click on your device to open the Device Profile screens to the right. Click on the Music tab, and make sure that the Sync All Music or Sync Selected Music box is checked. If you have Sync Selected Music checked, then below that, make sure you check all music that you want on your device. Then click on SYNC at the bottom (or APPLY).
Once you have successfully sync'd your music to your device, you will no longer see the cloud next to the songs, and you also will no longer get a message since you will have the songs physically on your device and not in iTunes in the Cloud.
Cheers,
GB -
How to transport an LSMW object from dev to Quality and to Production?
hi All,
Could any one please specify how to transport the lSMW object from developmen to Quality and finally to Production?
Thanks in Advance.
Regards.
Abhilash.Hi,
The "cleaner" way is using normal transport procedure via "Extras->Generate Change Request".
This will transport the entire project though, not possible to transport a single object this way.
step by step
1. Run Tcode LSMW in source system.
2. in the menu bar choose Extras-->Export. Now give the filename and save in your desktop.
3. Now login to destination system. again execute LSMW.
4. Now goto Extras-->Import.Give your file which was downloaded earlier.
5. Now tool bar click on import with diffrent name option and give your new project and subprojectname.
6. Now execute all steps.
Also refer the below link
http://help.sap.com/saphelp_crm50/helpdata/en/da/a22506a3291b418b759524b278dcde/content.htm
Please reward points if it helps
Thanks
Vikranth -
Error while install oracle 11G forms and reports -creating Reports Server components error
Hello,
while install oracle 11G forms and report i face below issue on below step ( configuration step)
>> creating Reports Server components error
[2014-10-15T09:26:26.328+03:00] [as] [TRACE:16] [] [oracle.as.config] [tid: 45] [ecid: 0000K^EnlatDg^WFLzfP8A1KFHkM00000^,0] [SRC_CLASS: oracle.as.config.utl.FileUtil] [SRC_METHOD: isWebsphereEnabled] Java property is not defined. isWebsphereEnabled=false
[2014-10-15T09:26:26.328+03:00] [as] [TRACE:16] [] [oracle.as.config] [tid: 45] [ecid: 0000K^EnlatDg^WFLzfP8A1KFHkM00000^,0] [SRC_CLASS: oracle.as.config.utl.FileUtil] [SRC_METHOD: isWebsphereEnabled] Java property is not defined. isWebsphereEnabled=false
[2014-10-15T09:26:26.449+03:00] [as] [TRACE:16] [] [oracle.as.config] [tid: 45] [ecid: 0000K^EnlatDg^WFLzfP8A1KFHkM00000^,0] [SRC_CLASS: oracle.as.config.utl.FileUtil] [SRC_METHOD: isWebsphereEnabled] Java property is not defined. isWebsphereEnabled=false
[2014-10-15T09:26:26.458+03:00] [as] [TRACE:16] [] [oracle.as.config] [tid: 45] [ecid: 0000K^EnlatDg^WFLzfP8A1KFHkM00000^,0] [SRC_CLASS: oracle.as.config.impl.OracleASInstanceProvisioner] [SRC_METHOD: directoryIsPopulated] directoryIsPopulated found unexcluded file/dir: /u01/app/oracle/product/fmw11g/asinst_1/tmp
[2014-10-15T09:26:26.459+03:00] [as] [TRACE:32] [] [oracle.as.config] [tid: 45] [ecid: 0000K^EnlatDg^WFLzfP8A1KFHkM00000^,0] [SRC_CLASS: oracle.as.config.impl.OracleASInstanceProvisioner] [SRC_METHOD: calcDirectoryStatus] Oracle Instance directory status: INSTANCERam,
You didn't read the response in your other thread.
WLS 10.3.5 isn't the right version of WLS to use with Forms 11.1.1.3
John -
How to transport mail form created in CRMD_EMAIL ????
Hi All,
How to transport a mail form created in CRMD_EMAIL ????
Regards,
AshishHi Easwar,
Thanks for replying !!!!
I tried to open up the Form in Tx SMARTFORMS, but it doesnt.
I also tried to change the package by choosing Object directory entry. Even that does not work.
Can you please explaing to me how I transport it using Tx SE01 ????
Regards,
Ashish -
How to pass parameter form one report to another and run it. No web page
Using Crystal Reports XI, Win XP pro SP2. I have main report I want to set a field as a hyperlink when user clicks on it I want to pass the value of that filed as an input to another report and run it . Note that this is not a Web page (no HTTP://). It is not what is described on article 1212 849.
You can remove the field value and right click on the on demand subreport and go to format subreport and in sureport tab-->use on demand subreport caption X+2 and place the field value in it.
Regards,
Raghavendra -
How to move offline form from SAP dev to QA and Production environments?
I developed and Adobe Form that can be used offline - steps in development are as below:
1. Webservice generated out of a BAPI in SAP.
2. WSDL generated from SOAMANAGER transaction code and kept on a newtowrk folder
3. Used this WSDL to prepare the form in SAP WebDynpro view
4. generated the URL of the webservice per Dev / QA / Prod when the form is being generated out of the WebDynrpo app - function module ICM_SERVER_INFO (used here)
4. Placed a regular type button on the form and passed the URL on the click of the button
5. This worked fine in Dev system.
6. Now the transports are moved to QA. But click of the button was still pointing to the Dev system.
7. Realized that it is reading the Dev WSDL from the network drive - it still tries to submit to the dev url of the webservice
8. So generated the WSDL from SOAMANAGER fo QA and over wrote with the Dev WSDL files.
9. When I opent he Adobe Form in WebDypro in QA, it reads the new WSDLs and updates the correct URLs - I checked this in the XML of the source of the Adobe Form
10. here comes the problem - even though step 9 is done correctly, I can not save the form and activate it to reflect the new URLs - since QA is not open. Same procedure may need to be followed in case of Production also.
So the question is:
How to circumvent this issue of updating the WSDL and URL after the development transport is moved to QA and Prodcution?
Or - QA and Prod have to opened, WSDL and URl updated in change mode of form and a transport also created?
(seems to be a limitation)
(I looked a bit but did not get any pointers when I googled - may be my search is not correct).
Please advise.
Thanks,hi Chandra,
I store the url in one of hidden field in form, then copy javascript below to click event, button control type: Regular.
just replace all the "<>" in the code below.
var message;
var response;
// The name of the data connection will be pulled from the WSDLConnection name in the ConnectionSet packet
var sWSDLName = <DataConnection name>;
// clone, modify and execute the connection.
var vConnection = xfa.connectionSet[sWSDLName].clone(true);
vConnection.soapAddress.value = <url>;
// Execute the connection, without remerge data after the result.
var ws_rc = vConnection.execute(true);
for multiple data connection, you have to repeat these code with replace different data connection name and it's url address.
you may use script object (something like subroutine).
Regards,
Kathy Lau -
How to display custom forms or reports on portal pages?
Hi friends
I am new to Portal. I knew that we can create forms and reports in portal.
But how can i display a custom form ( ex: employee.fmb) on a portal page?
Thanks
RaviAre you meaning Oracle Forms Module and Oracle Reports?
If so
please check the following
Reports
http://download-uk.oracle.com/docs/cd/B14099_15/bi.1012/b14048/pbr_conf.htm#sthref494
Forms (you can only invoke forms using the SSO)
http://download-uk.oracle.com/docs/cd/B25016_02/doc/dl/web/B14032_02/security.htm#sthref42
Otherwise you can create your custom HTML form and report using the following technologies:
http://download-uk.oracle.com/docs/cd/B14099_15/portal.1014/b14135/pdg_matrix.htm#CHDJIEIH
Please refer also to:
http://download-uk.oracle.com/docs/cd/B14099_15/portal.1014/b14135/pdg_understand.htm#sthref35
Hope this helps
Cheers
Diego -
How 2 Cre8 Parameter Form 4 Report Running?
Hi All!
I don't know how 2 cre8 parameter form in form developer 10g but i tried this please check it out and guide me.
1)i have create a simple tabular report "rpt_dept.rdf" in report developer 10g.
The query is
SELECT DEPTNO,DNAME,LOC FROM DEPT
WHERE DEPTNO= :P_DEPTNO
2)Then i create a form in form developer 10g frm_dept
in this form i have create a DEPT data block in which i have only take a one field "deptno" and
one push button
3)in Reports node i have create reports object "Report10" using 'Use Existing Report File" option, by clicking the browse and navigate to "rpt_dept.rdf"
"Report10" properties
name=report10
File name=D:\GTMS_FILES\GTMS_APPLICATIONS\Reports\rpt_dept.rdf
execution mode=batch
communication mode= synchronous
data source data block=DEPT
report destinaton type=file
4) Then in when_button_pressed Trigger in put this code
Declare
report_id Report_Object;
ReportServerJob VARCHAR2(100);
BEGIN
report_id:= find_report_object('REPORT10');
SET_REPORT_OBJECT_PROPERTY(report_id,REPORT_COMM_MODE,SYNCHRONOUS);
SET_REPORT_OBJECT_PROPERTY(report_id,REPORT_DESTYPE,CACHE);
SET_REPORT_OBJECT_PROPERTY(report_id,REPORT_SERVER,'rep_uoas');
SET_REPORT_OBJECT_PROPERTY(report_id,REPORT_OTHER,'P_DEPTNO='||:Dept.Deptno||' paramform=no');
ReportServerJob:=run_report_object(report_id);
END;
Now when i run this form and enter the deptno 10,20 or 30 and press the button it gives nothing and no report is shown
Note! "rep_uoas" is report server..
Please guide..
Please give me solution what mistake i have made
Thanks
RanaYou have to modify your code - machine_name is the name of your computer - this will run on your PC:
Declare
report_id Report_Object;
ReportServerJob VARCHAR2(100);
rep_status VARCHAR2(200);
L_REPORT_SERVER_PATH VARCHAR2(30):='http://machine_name:8889/reports';
L_REPORT_SERVER VARCHAR2(15):='rep_uoas';
BEGIN
report_id:= find_report_object('REPORT10');
SET_REPORT_OBJECT_PROPERTY(report_id,REPORT_COMM_MODE,SYNCHRONOUS);
SET_REPORT_OBJECT_PROPERTY(report_id,REPORT_DESTYPE,CACHE);
SET_REPORT_OBJECT_PROPERTY(report_id,REPORT_SERVER,L_REPORT_SERVER);
SET_REPORT_OBJECT_PROPERTY(report_id,REPORT_OTHER,'P_DEPTNO='||:Dept.Deptno||' paramform=no');
ReportServerJob:=run_report_object(report_id);
rep_status:=REPORT_OBJECT_STATUS(ReportServerJob);
WHILE rep_status in ('RUNNING','OPENING_REPORT','ENQUEUED')
LOOP
rep_status := report_object_status(ReportServerJob);
END LOOP;
IF rep_status='FINISHED' THEN
WEB.SHOW_DOCUMENT(L_REPORT_SERVER_PATH||'/rwservlet/getjobid'||substr(ReportServerJob,instr(ReportServerJob,'_',-1)+1)||'?'||'server='||L_REPORT_SERVER,'_blank');
ELSE
message('Error');
END IF;
END;
Before first running the report you have to start report server on your PC. -
How to configure to run SNP that creates only PReq and Stock Transfer only?
Hi all,
I am very new to SCM.
Please help me on the scenario like this:
-There are 3 Distribution Centers (DC): 2400, 2500, 3800 and a Vendor: 1003.
-Each DC can take products from otherDC. But only DC 2400 can directly send purchase requisition to Vendor 1003 when no stock at all DCs.
-There is a Forecast released from Demand Planning to SNP, that is 1000 products at Distribution Center 2400.
-I will run SNP Heuristic (or Capabable to Match or Optimization) to cover this demand.
-Usually, SNP can create: Purchase Requisition, Stock transfer Requistion, and Planned Order.
But I only want the SNP to create Purchase Requisition and Stock Stransfer only.
The question are:
1.In which situations (tock situation,u2026) the system can create Requisition and Stock Stransfer only ?
2.I need create a new Supply Chain Model (Model) and a new Planning Version from scratch. How can I configure the system (Transportation lanes, Product Master Data, Procurement type in product masteru2026) and make it run to satisfy this scenario?
3.Do I need setting differently for each SNP method ( Heuristic, Capable to Match, Optimization)?
Thanks very much for your support.
XuanDuyenDear Mr. Aparna,
Thanks for your quick reply.
Now I haved created a model like the scenario with product T-F204 and can run. ( I do not use vendor 1003. I created the Plant 1000 instead). But as you said, when I run with SNP Heuristic method (Network level), the system alert:
u201C Error exist in Locationsu2019 processing sequence for product T-F204u201D
However, I search internet and found a book about CTM. It also discuss about this and the solution as below:
u201CRecursive Replenishment
When using complex supply chains, with many locations and various directional
supply routes, it can be easy to confuse a level-by-level planning tool. In certain
situations, recursive planning can occur. Recursiveness, is when the planning
algorithm is thrown into a loop (circular replenishment). Location 1000 can ship
to location 2400, and location 2400 can ship to location 1000. Situations such as
this can cause the CTM engine to terminate since it cannot find a starting point.
The solution: Reduce to number of muximum consecutive transport order chains.
Within the CTMProfile, Settingsu2192Master Data Settings tab, planners can control
the sources of supply for External Procurement. With the parameter Maximum
Number of Consecutive Stock Transfers, you determine how many consecutive
stock transfers CTM planning can create. This value does not restrict the total
number of stock transfers for a demand. If you enter a value here, you can prevent
the system from transporting the receipts for a demand over several locations due
to the procurement priority. Also, you must have modeled the master data in such
a way that a direct stock transfer is possible if the system ignores the procurement
priority. If a direct stock transfer is not possible, CTM cannot fulfill the demand.u201D
Currently, our system runs only with Heuristic. It could not run CTM and Optimization so I could not check.
My questions are:
1. Is the solution of the book can apply for my bi-direction transportation lanes requirement?
2. If it is true, with my scenario, what is the best u201CMaximum Number of Consecutive Stock Transfersu201D I can set?
3. How can I model u201Cthe master data in such a way that a direct stock transfer is possible if the system ignores the procurement priorityu201D?
Please follow the link to download the book (and view page 107 of book (page 117 of Acrobat Reader) as bellow if you want:
http://www.mediafire.com/?9clag9op3lm0iv9
Thanks very much for your help!
Xuanduyen -
Install Forms and Report 11g, Weblogic, OID and SSO ?
Hello,
I want to migrate our system from Forms and Reports 6i to 11g with weblogic server 10.3.3 and I have two questions:
1st: If we considered to obtain a system consists of (Weblogic 11g + Forms and Reports 11g + OID + SSO + Weblogic Portal + BI Publisher)
What is the steps and the sequence of products installation and configuration, and what is the required versions of each one ?
2nd: Can I abandon OID and SSO, is there a substitute ?
If so, what's the steps and the sequence of products installation and configuration ?
Thank you very much>
You use the Oracle WebLogic Server installer to install Oracle WebLogic Server and to create a Middleware home (which is required before you can install Oracle Forms and Reports).
For Oracle Forms and Reports 11g Release 2 (11.1.2), download Oracle WebLogic Server 11g (10.3.5) from OTN or Oracle Software Delivery Cloud.
Be sure to select the proper Oracle WebLogic Server installer for your platform.
>
weblogic you can download from http://www.oracle.com/technetwork/middleware/ias/downloads/wls-main-097127.html -
Hello guys,
Please help me on below issue...
I have developed one smart form in sandbox i want to transport it into the development server. Please let me know the possible ways.
immediate solution will be apreceiated
thanks for your time adn cooperationSAP SMART FORMS AND SMART STYLES ARE STAND-ALONE DEVELOPMENT OBJECTS. THIS MEANS THAT FOR EVERY SMART FORM AND FOR EVERY SMART STYLE A TADIR ENTRY IS CREATED. THE CORRESPONDING TRANSPORT OBJECTS ARE CALLED
SSFO FOR SMART FORMS (R3TR SSFO NAME)
SSST FOR SMART STYLES (R3TR SSST NAME)
MIGRATING SAPSCRIPT FORMS
UTILITIES -> MIGRATE SAPSCRIPT FORM.
FOR MASS MIGRATION, SF_MIGRATE.
MIGRATING SMARTFORMS
CHOOSE UTILITIES ® MIGRATION ® PDF-BASED FORM ® EXPORT.
TRANSPORTING SMART FORMS
A SMARTFORM IS TRANSPORTED NO DIFFERENTLY THAN ANY OTHER OBJECT. IF IT IS ASSIGNED TO A DEVELOPMENT CLASS THAT IS ATTACHED TO A TRANSPORT LAYER, IT WILL BE TRANSPORTED. THE DEFINITION IS TRANSPORTED, AND WHEN CALLED, THE FUNCTION MODULE IS
REGENERATED. THIS LEADS TO AN INTERETSING SITUATION. ON THE NEW MACHINE, IT IS VERY LIKELY THE FUNCTION MODULE NAME WILL BE DIFFERENT THAN THE NAME ON THE SOURCE SYSTEM. MAKE SURE, BEFORE YOU CALL THE FUNCTION MODULE, YOU RESOLVE THE EXTERNAL NAME TO THE INTERNAL NAME USING THE 'SSF_FUNCTION_MODULE_NAME'
FUNCTION MODULE. TYPICALLY, GENERATE THE SF, AND THEN USE THE PATTERN TO BEING IN THE INTERFACE. THEN CHANGE THE CALL FUNCTION TO USE THE NAME YOU GET BACK FROM THE ABOVE FUNCTION MODULE.
Please reward points if useful. -
How to transport WWI form template
Hi,
I have developed one WWI form template in development server.I don't know how to transport it to production server.If somebody knows kindly help.
Regards,
RajeshHi rajesh
See this PDF in SCN,may be helpful to you
https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/519d369b-0401-0010-0186-ff7a2b5d2bc0
s@chin
Maybe you are looking for
-
I recently accepted an automatic update(January, 2014) for Pages on my MacBook Pro. I can no longer open Pages or documents created with the prior version. Any suggestions as to how to correct this problem?
-
Place contents of xml file to 2D array
i have a xml file like <?xml version="1.0" encoding="UTF-8"?> <!DOCTYPE map SYSTEM "map.dtd"> <map width="5" height="5" goal="6" name="Hallways of Dooom"> <random-item type='lantern' amount='5' /> <random-item type='health' amount='10' />
-
How to uninstall Windows Phone 8.1 Emulator from Visual Studio
Hello, I recently installed the Windows Phone 8.1 Emulator for Visual Studio. However, I found out that you need to be running Windows 8/8.1 Pro to deploy the emulator, but my computer is the regular edition of Windows 8.1. How would I uninstall the
-
How can i downgrade iPhone 4 ios 7 to 6.1.3
i have an iphone 4 it's not working on voice call like if i call anyone it's just work as receive but anyone can hear each other that's why i decide to downgrade but it's also not working downgrade even i follow all steps of apple comunity, anyone an
-
I went to sync my iPhone 4 as usual with my iTunes account on my MacBook Pro and when it got to the end stage of the sync where it syncs with iPhoto, I get a pop up message that says, "The iPhone cannot be synced. The required file cannot be found."