How to Trasport texts in se43

Hello,
I was asked to add customer folders & transactions to area menu S000.
In order to do that I choose to change  the menu (not extend it). 
I've added my own area menu and translated it.
In dev everything looked fine , but when I transported the CR  to qa and prod I found out that the translation wasn't included.
how do I link the translation objects to a transport request in se43 ?
Thanks
Ziv.

Hi,
Please refer to following link :
[Transport of Area Menu with Translated Texts |Transport of Area Menu with Translated Texts;
[transporting area menu  |transporting area menu;
[Area Menu Transport|Area Menu  Transport  issue;
Hope this helps.
Regards,
Chandravadan

Similar Messages

  • How to print text vertically in smart forms

    hi,
    Can any one tell how to print text vertically in smartforms
    ADVANCE THANKS
    GUHAPRIYAN

    HI,
    Chk out  this thread.Maybe it proves helpful.
    Re: vertical writing in smartforms
    Regards,
    Gayathri

  • How to wrap text around a table

    I'm new to Pages. The first thing I tried to do was play with tables, because they are the biggest headache in Microsoft Word. However, I ran into a problem right away--I cannot figure out how to wrap text tightly around a table so that the table is surrounded by text on all four sides.
    Does anyone know how to do this? Seems very basic. There is even a button that shows what I want (Text Wrap drop-down --> Around), but when I click on it, nothing happens.

    Peter,
    I can recreate the appearance with five hard returns after the first paragraph, or instead, changing the After Paragraph spacing to 116 pt. Did this with Baskerville Regular 12 pt with line spacing set at 1. Same Arrange settings as shown by OP.

  • How to extract text from a PDF file?

    Hello Suners,
    i need to know how to extract text from a pdf file?
    does anyone know what is the character encoding in pdf file, when i use an input stream to read the file it gives encrypted characters not the original text in the file.
    is there any procedures i should do while reading a pdf file,
    File f=new File("D:/File.pdf");
                   FileReader fr=new FileReader(f);
                   BufferedReader br=new BufferedReader(fr);
                   String s=br.readLine();any help will be deeply appreciated.

    jverd wrote:
    First, you set i once, and then loop without ever changing it. So your loop body will execute either 0 times or infinitely many times, writing the same byte every time. Actually, maybe it'll execute once and then throw an ArrayIndexOutOfBoundsException. That's basic java looping, and you're going to need a firm grip on that before you try to do anything as advanced as PDF reading. the case.oops you are absolutely right that was a silly mistake to forget that,
    Second, what do the docs for getPageContent say? Do they say that it simply gives you the text on the page as if the thing were a simple text doc? I'd be surprised if that's the case.getPageContent return array of bytes so the question will be:
    how to get text from this array? i was thinking of :
        private void jButton1_actionPerformed(ActionEvent e) {
            PdfReader read;
            StringBuffer buff=new StringBuffer();
            try {
                read = new PdfReader("d:/getjobid2727.pdf");
                read.getMetaData();
                byte[] data=read.getPageContent(1);
                int i=0;
                while(i>-1){ 
                    buff.append(data);
    i++;
    String str=buff.toString();
    FileOutputStream fos = new FileOutputStream("D:/test.txt");
    Writer out = new OutputStreamWriter(fos, "UTF8");
    out.write(str);
    out.close();
    read.close();
    } catch (Exception f) {
    f.printStackTrace();
    "D:/test.txt"  hasn't been created!! when i ran the program,
    is my steps right?                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                       

  • How to extract text from a PDF file using php?

    How to extract text from a PDF file using php?
    thanks
    fabio

    > Do you know of any other way this can be done?
    There are many ways. But this out of scope of this forum. You can try this forum: http://forum.planetpdf.com/

  • How to email text from a text component in my applet on a the host server ?

    How to email text from a text component in my applet on a the host server, back to my email address ?
    Assuming I have Email Form on the host server.
    Help will be appreciated.

    You can do like below
    =REPLACE(Fields!Column.Value," " & Parameters!ParameterName.value & " ","<b>" & Parameters!ParameterName.value & "</b>")
    The select the expression and  right click and choose placeholder properties
    Inside that set Markup type as HTML 
    then it will highlight the passed parameter value in bold within the full xml string
    Please Mark This As Answer if it helps to solve the issue Visakh ---------------------------- http://visakhm.blogspot.com/ https://www.facebook.com/VmBlogs

  • How to change text in PDF doc. which is a musical score

    Hello,
    I'm new here, so please excuse me if I do or say something I shouldn't.
    I need to change the words in a musical score because the font is too small. OCR recognition doesn"t work because there are illustrations that are different from images or text... Is there a way to get in there and make the changes I need to do?
    Any help greatly appreciated.

    Thanks for the reply, but I have Adobe Reader 9 Pro. Will it still not 
    work ?
    Le 29 sept. 2011 à 29 sept. 11 - 16:09, Claudio González a écrit :
    Re: How to change text in PDF doc. which is a musical score
    created by Claudio González in Adobe Reader - View the full discussion
    Unfortunately, not with the free Reader.
    Replies to this message go to everyone subscribed to this thread, 
    not directly to the person who posted the message. To post a reply, 
    either reply to this email or visit the message page: [http://forums.adobe.com/message/3944833#3944833
    To unsubscribe from this thread, please visit the message page at [http://forums.adobe.com/message/3944833#3944833
    ]. In the Actions box on the right, click the Stop Email 
    Notifications link.
    Start a new discussion in Adobe Reader by email or at Adobe Forums
    For more information about maintaining your forum email 
    notifications please go to http://forums.adobe.com/message/2936746#2936746

  • How to make text start at the top of a page in livecycle 9

    Hi, How can I get the text in a large text field to start at the top left of the field rather than at the center of the field? In addition, may one know how to make text wrap in the form as well?
    Thanks,
    David

    To set the Text alignment properties use "Paragraph" pallet you can make it visible by selecting Window>>Paragraph or Shift+F5
    And to allow text wrapping you need to select "Allow Multiple Lines" checkbox under "Object" pallet and "Field" tab. You can make Object pallet visible by selecting Window>>Object or Shift+F7.
    Good Luck,

  • How to do text formatting?`

    I would like to ask how to do text formatting in println?
    I need to print out a series of data with column heading, for example
    Heading1 Heading2 Detail
    abc cdea 222222
    22222 22222222 33
    is there any function like C++ that we can format the string before we print it out?

    Java doesn't have a built-in sprintf equivalent, but here are a couple of third-party tools:
    http://www.braju.com/
    http://developer.java.sun.com/developer/technicalArticles/Programming/sprintf/

  • How to provide text editor in dialog program

    i have a requirement to enter upto 300 words in a dialog box how to provide text editor in dialog program

    you can use the custom controls for the same
    check this below link may be useful for you.........
    http://help.sap.com/saphelp_nw04/helpdata/en/2a/755b94ca5911d299af5c9604c10e27/content.htm

  • How to link text frames in Pages 5.2?

    How to link text frames in Pages 5.2?

    The correct term in Pages is Text Boxes, and true linking is not implemented in v5.2. You can Unite, Intersect, Subtract, and Exclude multiple Text Boxes via the Arrange panel. These attributes only appear when two or more Text Boxes are selected. Also, on the Arrange menu, you will need Object Placement set to Move with Text, and the Text Wrap set to None for more accurate positioning.
    In the following example, there was initially a Text Box with overflowing text that was duplicated. With both Text Boxes selected and aligned, I could then use the Unite feature from the Arrange panel. This allowed the text to flow into the second box. Selecting text in one box and dragging upwards continues the text selection between both boxes. Hoefler italic applied in one box is applied to both. Appropriately placed, another trip to the Arrange panel to enable Text Wrap around and text fit adjustments.

  • How to print text on container using oop on alv list

    Hello Guru's,
             pl guide me how to print text on container using alv list-display which have interactive events  using     oop classes/methods ...
                    I want to print hard coded text on coantainer , on double clicking it will call another screen.
    Pl Help..
    Message was edited by:
            paresh sonavane

    Hi Paresh,
           1.      Go to the Layout and Create One custom container box and give name it.
            2. Custom Container is the one type of tool and its used for Displaying the Reports 
                with the use of ABAP Objects.
            3. Go to se38 and Write The Following Code.
    tables ZTEAM_GD.
    DATA : OBJ TYPE REF TO CL_GUI_CUSTOM_CONTAINER,
           OBJ1 TYPE REF TO CL_GUI_ALV_GRID.
    DATA IT_TEAM LIKE TABLE OF ZPLAYER_BAT_DET       .
    SELECT * FROM ZPLAYER_BAT_DET INTO TABLE IT_TEAM.
    CREATE OBJECT OBJ
      EXPORTING
        CONTAINER_NAME              = 'ALV'.          -
    > Give ur Container Name
    CREATE OBJECT OBJ1
      EXPORTING
        I_PARENT          = OBJ.
    CALL METHOD OBJ1->SET_TABLE_FOR_FIRST_DISPLAY
      EXPORTING
        I_STRUCTURE_NAME              = 'ZPLAYER_BAT_DET'
      CHANGING
        IT_OUTTAB                     = IT_TEAM.
    *CALL METHOD OBJ1->SET_DROP_DOWN_TABLE
    EXPORTING
       I_STRUCTURE_NAME = 'ZTEAM_GD'
    CHANGING
       IT_OUTTAB        = IT_TEAM.
    CALL SCREEN 9000.
    *&      Module  USER_COMMAND_9000  INPUT
          text
    MODULE USER_COMMAND_9000 INPUT.
    CASE SY-UCOMM.
    WHEN 'EXT'.
      LEAVE PROGRAM.
    ENDCASE.
    ENDMODULE.                 " USER_COMMAND_9000  INPU     
    Thanks.
    Reward If Helpful.

  • How to get Text for nodes in Tree Structure

    Hi Friends,
    How to get Text for nodes in Tree Structure
    REPORT  YFIIN_REP_TREE_STRUCTURE  no standard page heading.
                       I N I T I A L I Z A T I O N
    INITIALIZATION.
    AUTHORITY-CHECK OBJECT 'ZPRCHK_NEW' :
                      ID 'YFIINICD' FIELD SY-TCODE.
      IF SY-SUBRC NE 0.
        MESSAGE I000(yFI02) with SY-TCODE .
        LEAVE PROGRAM.
      ENDIF.
    class screen_init definition create private.
    Public section
      public section.
        class-methods init_screen.
        methods constructor.
    Private section
      private section.
        data: container1 type ref to cl_gui_custom_container,
              container2 type ref to cl_gui_custom_container,
              tree type ref to cl_gui_simple_tree.
        methods: fill_tree.
    endclass.
    Class for Handling Events
    class screen_handler definition.
    Public section
      public section.
        methods: constructor importing container
                   type ref to cl_gui_custom_container,
                 handle_node_double_click
                   for event node_double_click
                   of cl_gui_simple_tree
                   importing node_key .
    Private section
      private section.
    endclass.
    *&                        Classes implementation
    class screen_init implementation.
    *&                        Method INIT_SCREEN
      method init_screen.
        data screen type ref to screen_init.
        create object screen.
      endmethod.
    *&                        Method CONSTRUCTOR
      method constructor.
        data: events type cntl_simple_events,
              event like line of events,
              event_handler type ref to screen_handler.
        create object: container1 exporting container_name = 'CUSTOM_1',
                       tree exporting parent = container1
                         node_selection_mode =
                cl_gui_simple_tree=>node_sel_mode_multiple.
        create object: container2 exporting container_name = 'CUSTOM_2',
        event_handler exporting container = container2.
    event-eventid = cl_gui_simple_tree=>eventid_node_double_click.
        event-appl_event = ' '.   "system event, does not trigger PAI
        append event to events.
        call method tree->set_registered_events
             exporting events = events.
        set handler event_handler->handle_node_double_click for tree.
         call method: me->fill_tree.
      endmethod.
    *&                        Method FILL_TREE
      method fill_tree.
        data: node_table type table of abdemonode,
              node type abdemonode.
    types:    begin of tree_node,
              folder(50) type c,
              tcode(60) type c,
              tcode1(60) type c,
              tcode2(60) type c,
              text(60) type c,
              text1(60) type c,
              text2(60) type c,
              end of tree_node.
      data:  wa_tree_node type tree_node,
                t_tree_node type table of tree_node.
    wa_tree_node-folder = text-001.
    wa_tree_node-tcode  = text-002.
    wa_tree_node-text =  'Creditors ageing'.
    wa_tree_node-tcode1 = text-003.
    wa_tree_node-text1 =  'GR/IR aging'.
    wa_tree_node-tcode2 = text-004.
    wa_tree_node-text2 =  'Bank Balance'.
    append wa_tree_node to t_tree_node.
    clear wa_tree_node .
    wa_tree_node-folder = text-005.
    wa_tree_node-tcode  = text-006.
    wa_tree_node-text =  'Creditors ageing'.
    wa_tree_node-tcode1 = text-007.
    wa_tree_node-text1 =  'Creditors ageing'.
    wa_tree_node-tcode2 = text-008.
    wa_tree_node-text2 =  'Creditors ageing'.
    append wa_tree_node to t_tree_node.
    clear wa_tree_node .
    wa_tree_node-folder = text-009.
    wa_tree_node-tcode  = text-010.
    wa_tree_node-text =  'Creditors ageing'.
    wa_tree_node-tcode1 = text-011.
    wa_tree_node-text1 =  'Creditors ageing'.
    wa_tree_node-tcode2 = text-012.
    wa_tree_node-text2 =  'Creditors ageing'.
    append wa_tree_node to t_tree_node.
    clear wa_tree_node .
    node-hidden = ' '.                 " All nodes are visible,
        node-disabled = ' '.               " selectable,
        node-isfolder = 'X'.                                    " a folder,
        node-expander = ' '.               " have no '+' sign forexpansion.
        loop at t_tree_node into wa_tree_node.
          at new folder.
            node-isfolder = 'X'.                      " a folder,
            node-node_key = wa_tree_node-folder.
                   clear node-relatkey.
            clear node-relatship.
            node-text = wa_tree_node-folder.
            node-n_image =   ' '.
            node-exp_image = ' '.
            append node to node_table.
          endat.
         at new tcode .
            node-isfolder = ' '.                          " a folder,
            node-n_image =   '@CS@'.       "AV is the internal code
            node-exp_image = '@CS@'.       "for an airplane icon
            node-node_key = wa_tree_node-tcode.
             node-text = wa_tree_node-text .
                     node-relatkey = wa_tree_node-folder.
            node-relatship = cl_gui_simple_tree=>relat_last_child.
          endat.
          append node to node_table.
        at new tcode1 .
            node-isfolder = ' '.                          " a folder,
            node-n_image =   '@CS@'.       "AV is the internal code
            node-exp_image = '@CS@'.       "for an airplane icon
            node-node_key = wa_tree_node-tcode1.
                     node-relatkey = wa_tree_node-folder.
            node-relatship = cl_gui_simple_tree=>relat_last_child.
              node-text = wa_tree_node-text1.
         endat.
          append node to node_table.
           at new tcode2 .
            node-isfolder = ' '.                          " a folder,
            node-n_image =   '@CS@'.       "AV is the internal code
            node-exp_image = '@CS@'.       "for an airplane icon
            node-node_key = wa_tree_node-tcode2.
                     node-relatkey = wa_tree_node-folder.
            node-relatship = cl_gui_simple_tree=>relat_last_child.
            node-text = wa_tree_node-text2.
         endat.
          append node to node_table.
        endloop.
        call method tree->add_nodes
             exporting table_structure_name = 'ABDEMONODE'
                       node_table = node_table.
      endmethod.
    endclass.
    *&                        Class implementation
    class screen_handler implementation.
    *&                        Method CONSTRUCTOR
      method constructor.
       create object: HTML_VIEWER exporting PARENT = CONTAINER,
                      LIST_VIEWER exporting I_PARENT = CONTAINER.
      endmethod.
    *&                 Method HANDLE_NODE_DOUBLE_CLICK
      method handle_node_double_click.
      case node_key(12).
    when 'Creditors'.
    submit YFIIN_REP_CREADITORS_AGING  via selection-screen and return.
    when  'Vendor'.
    submit YFIIN_REP_VENDOR_OUTSTANDING  via selection-screen and return.
    when 'Customer'.
    submit YFIIN_REP_CUSTOMER_OUTSTANDING  via selection-screen and
    return.
    when 'GR/IR'.
    submit YFIIN_REP_GRIR_AGING  via selection-screen and return.
    when 'Acc_Doc_List'.
    submit YFIIN_REP_ACCOUNTINGDOCLIST  via selection-screen and return.
    when 'Bank Bal'.
    submit YFIIN_REP_BANKBALANCE  via selection-screen and return.
    when 'Ven_Cus_Dtl'.
    submit YFIIN_REP_VENDORCUST_DETAIL via selection-screen and return.
    when 'G/L_Open_Bal'.
    submit YFIIN_REP_OPENINGBALANCE via selection-screen and return.
    when 'Usr_Authn'.
    submit YFIIN_REP_USERAUTHRIZATION via selection-screen and return.
    endcase.
      endmethod.
    endclass.
    Program execution ************************************************
    load-of-program.
      call screen 9001.
    at selection-screen.
    Dialog Modules PBO
    *&      Module  STATUS_9001  OUTPUT
          text
    module status_9001 output.
      set pf-status 'SCREEN_9001'.
      set titlebar 'TIT_9001'.
      call method screen_init=>init_screen.
    endmodule.                 " STATUS_9001  OUTPUT
    Dialog Modules PAI
    *&      Module  USER_COMMAND_9001  INPUT
          text
    module user_command_9001 input.
    endmodule.                 " USER_COMMAND_9001  INPUT
    *&      Module  exit_9001  INPUT
          text
    module exit_9001 input.
    case sy-ucomm.
    when 'EXIT'.
      set screen 0.
    endcase.
    endmodule.
            exit_9001  INPUT

    you can read  the table node_table with nody key value which imports when docubble click the the tree node (Double clifk event).
    Regards,
    Gopi .
    Reward points if helpfull.

  • How can I text photos from iPhone 6 to another smartphone

    How can I text pictures from my iPhone 6 to another kind of smartphone (Android, etc).? I can text photos through iMessage to other iPhone users with no problem. In Settings, my iMessage, Send as SMS and MMS Messaging are all set to `On.'
    Conversely, I don't seem to be able to receive photo texts from another person's non-Apple phone, although I'm told she can send to other iPhones with no problem.

    Do you have cellular data turned on? Do you have MMS enabled on your account through your carrier?

  • Can't figure out how to "talk text". Any ideas?

    I can't figure out how to "talk text". I thought it might be in settings under "voice over", so I turned that on. Nope. Now I can't turn voice over off and it's annoying listening to her tell me what I wrote or what she thinks I might want to say. Any help in either subject appreciated.

    Turn VoiceOver of in Accessibility. Settings>General>Accessibility>Voice Over>Off. If you have Siri activated, invoke Siri and say, "Turn off VoiceOver".
    I'm not sure exactly what you mean by "talk text" If you mean "Tap to talk", that feature will only appear in iMessages, not SMS messages.

Maybe you are looking for