How to trigger an xi communication from abap report?

Hello,
I would like to ask if there is a blog, howto or something about How to trigger the communication in an abap programm. The communication will be either rfc->ftp or rfc->jdbc. So how can I tell XI to call that rfc to start the communication (from r/3 as abap programm)?
thank you.

>
RAJEEV GUPTA wrote:
> Hi Daniel,
>
> you can tell rfc to send the rfc response to XI.............but for this you have two options:
> 1. by se38 report you can execute rfc in r/3 and send its response to XI destination target system by executing the function module of rfc in your abap report
> 2. you can send the rfc req msg from XI to r/3 and then you will automatically get the rfc response from r/3 in XI via this synch msg.
>
>
> Regards,
> Rajeev Gupta
Hello,
about nr1:
When I set the DESTINATION parameter in a abap report, doesn't this mean the system where the rfc is available? Because when I do it like that my abap report would look for the rfc there and not in r/3 itself. Isn't that right?
e.g.
CALL FUNCTION 'RFC_on_r3'
           DESTINATION 'XI.rfc.dest'
So you think that should work?

Similar Messages

  • How can I print PDF attachments from ABAP report in transaction ME23N?

    Hi,
    Users attach PDF files using "services for objects" in transaction ME23N.
    How can I print the PDF attachments from ABAP report ?
    Thanks in advance,,

    Hi,
      check this link,this might help you to solve your problem
    /people/thomas.jung3/blog/2005/04/28/setting-up-an-adobe-writer-for-abap-output
    Regards
    Kiran Sure

  • How to call a sub screen from abap report

    Hellow friends,
    how to call sub screen 1001 prog name SAPLMGD1
    and main program SAPLMGMM screen 4000 of tcode MM02.
    i need to call the sub screen from abap report

    Hi Rajesh,
    You can use FM MATERIAL_MAINTAIN_DIALOGUE to go to subcreen MRP1 in MM02.
    Please check this sample code from other thread and enter 'MRP 1' for p_dytxt.
    REPORT zsritest.
    TABLES mara.
    DATA: lv_bilds LIKE t133a-bilds,
    ls_t130m LIKE t130m,
    ls_rmmg1 LIKE rmmg1,
    lwa_view TYPE mbildtab,
    lwa_auswg TYPE mgauswg,
    lt_views TYPE STANDARD TABLE OF mbildtab INITIAL SIZE 0,
    lt_auswg TYPE STANDARD TABLE OF mgauswg INITIAL SIZE 0.
    PARAMETERS: p_matnr LIKE mara-matnr,
    p_werks LIKE marc-werks,
    p_dytxt LIKE mbildtab-dytxt.
    SELECT SINGLE * FROM mara WHERE matnr EQ p_matnr.
    CHECK sy-subrc EQ 0.
    CALL FUNCTION 'T130M_SINGLE_READ'
    EXPORTING
    tcode = 'MM02'
    kzrfb = 'X'
    IMPORTING
    wt130m = ls_t130m
    EXCEPTIONS
    not_found = 1
    wrong_call = 2
    OTHERS = 3.
    CALL FUNCTION 'BILDSEQUENZ_IDENTIFY'
    EXPORTING
    branche = mara-mbrsh
    materialart = mara-mtart
    tcode_ref = ls_t130m-trref
    * KZRFB = ' '
    IMPORTING
    bildsequenz = lv_bilds
    * KZ_BILDS_CHANGED =
    EXCEPTIONS
    wrong_call = 1
    not_found = 2
    OTHERS = 3.
    CALL FUNCTION 'SELECTION_VIEWS_FIND'
    EXPORTING
    bildsequenz = lv_bilds
    pflegestatus = mara-pstat
    TABLES
    bildtab = lt_views[]
    EXCEPTIONS
    call_wrong = 1
    empty_selection = 2
    OTHERS = 3.
    ls_rmmg1-matnr = mara-matnr.
    ls_rmmg1-werks = p_werks.
    READ TABLE lt_views INTO lwa_view WITH KEY dytxt = p_dytxt.
    CHECK sy-subrc EQ 0.
    lwa_auswg-auswg = lwa_view-auswg.
    APPEND lwa_auswg TO lt_auswg.
    CALL FUNCTION 'MATERIAL_MAINTAIN_DIALOGUE'
    EXPORTING
    irmmg1 = ls_rmmg1
    * IRMMG1_REF = ' '
    KZ_EIN_DARK = 'X'
    t_tcode = 'MM02'
    * FLG_MATNR_RES = ' '
    p_pstat = mara-pstat
    * FLG_STAT_ALL = ' '
    * CALL_MODE2 = ' '
    * IMPORTING
    * MATERIAL_NO =
    * UPDATE_OK =
    TABLES
    iauswg = lt_auswg[]
    EXCEPTIONS
    no_authority = 1
    OTHERS = 2.
    IF sy-subrc <> 0.
    * MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
    * WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
    ENDIF.
    Regards,
    Ferry Lianto

  • How-to trigger a process chain using ABAP?

    Does anybody know how to trigger a process chain using ABAP code?
    Any help would be appreciated!
    Thanks
    Ioan

    Hi Ioan,
    try this in your ABAP:
        CALL FUNCTION 'BP_EVENT_RAISE'
          EXPORTING
            eventid         = 'Your Event'
            eventparm       = 'START'
            target_instance = ' '
          EXCEPTIONS
            OTHERS          = 01.
    and schedule your process chain, waiting for 'Your Event'.
    regards
    Siggi

  • How to trigger updateMarker for TextEditor from code

    I'm making my own marker. But when I change document programmatically, I couldn't trigger updateMarker. So markers're indexs don't change.Markers has not showed correctly. How to trigger updateMarker for TextEditor from code?

    Hi Viren,
    Glad that your problem is resolved.
    Help.Sap.com is the best reference: http://help.sap.com/saphelp_nw04/helpdata/en/b2/e50138fede083de10000009b38f8cf/frameset.htm
    Also check the "How-To" docs in https://www.sdn.sap.com/irj/sdn/developerareas/bi
    Bye
    Dinesh

  • How to create .csv file from ABAP report

    Hi
    We have a requirement to generate .csv file from abap report.
    Currently user saves data from abap report to spreadsheet(.xls format) in desktop.  Then opens excel file and save as .csv format.  Need option to save directly in .csv format instead of .xls format.
    Please let me know, if there is any standard function module available to create .csv file.
    Regards
    Uma

    I tried with your code it's going to dump
    REPORT ZTEMP101 message-id 00.
    tables: lfa1.
    types: begin of t_lfa1,
          lifnr like lfa1-lifnr,
          name1 like lfa1-name1,
          end of t_lfa1.
    data: i_lfa1 type standard table of t_lfa1,
          wa_lfa1 type t_lfa1.
    types truxs_t_text_data(4096) type c occurs 0.
    data: csv_converted_table type table of TRUXS_T_TEXT_DATA.
    select-options: s_lifnr for lfa1-lifnr.
    select lifnr name1 from lfa1 into table i_lfa1
           where lifnr in s_lifnr.
    CALL FUNCTION 'SAP_CONVERT_TO_CSV_FORMAT'
    EXPORTING
       I_FIELD_SEPERATOR          = ';'
             I_LINE_HEADER              =
             I_FILENAME                 =
             I_APPL_KEEP                = ' '
      TABLES
        I_TAB_SAP_DATA             = I_LFA1
    CHANGING
       I_TAB_CONVERTED_DATA       = csv_converted_table
    EXCEPTIONS
       CONVERSION_FAILED          = 1
       OTHERS                     = 2
    IF SY-SUBRC <> 0.
    MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
            WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
    ENDIF.
    CALL FUNCTION 'WS_DOWNLOAD'
    EXPORTING
      BIN_FILESIZE                  = ' '
      CODEPAGE                      = ' '
       FILENAME                      =
       'C:\Documents and Settings\ps12\Desktop\Test folder\exl.cvs'
      FILETYPE                      = 'DAT'
      MODE                          = ' '
      WK1_N_FORMAT                  = ' '
      WK1_N_SIZE                    = ' '
      WK1_T_FORMAT                  = ' '
      WK1_T_SIZE                    = ' '
      COL_SELECT                    = ' '
      COL_SELECTMASK                = ' '
      NO_AUTH_CHECK                 = ' '
    IMPORTING
      FILELENGTH                    =
      TABLES
        DATA_TAB                      = csv_converted_table
      FIELDNAMES                    =
    EXCEPTIONS
      FILE_OPEN_ERROR               = 1
      FILE_WRITE_ERROR              = 2
      INVALID_FILESIZE              = 3
      INVALID_TYPE                  = 4
      NO_BATCH                      = 5
      UNKNOWN_ERROR                 = 6
      INVALID_TABLE_WIDTH           = 7
      GUI_REFUSE_FILETRANSFER       = 8
      CUSTOMER_ERROR                = 9
      OTHERS                        = 10
    IF SY-SUBRC <> 0.
    MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
            WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
    ENDIF.
    my version is 4.6c

  • Start BPM process from ABAP report. Need some investigations.

    Hi there!
    I have to start a BPM process from ABAP report. I found an article http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/10d75b45-7fef-2b10-bc8e-c6012e0a9457?QuickLink=index&overridelayout=true and have done everything it describes but the process doesn't start.
    What I've done:
    1) Created a service proxy in SE80.
    2) Created a logical port in SOAMANAGER.
    3) Write a code to start a WebService in ABAP Report.
    But when I start a program nothing happens, no errors.
    What analysis I did:
    1) See logs and traces in SOAMANAGER - there is nothing appears after I start the report.
    2) Tried to test connection to my WebService in SM59 - the connection works, but it use a POST method instead of GET:
      Error: com.sap.engine.services.webservices.espbase.server.additions.wsa.WSAddressingException: com.sap.SOA.wsr.030104 - Expected request method POST. Found GET.
    But I think it is OK and from the report it use a right method.
    3) Tried to delete a logical port - the error of communication problem appears. So it means that all settings are right.
    4) No logs in NWA logs
    My thoughts - if there is not any errors and no result, it can be because the user authorization. E.g. it tried to start a process by a user who doesn't have SAP_BPM_SuperAdmin role. But I can't find a way how to check what really happens. So I want to ask for a help, colleagues:).

    Dear Kirill Zhuklinets,
    Can you share your solution as i am facing the same error while trying to consume BPM webservice from SRM ECC
    Error Message from SRM ECC :
    Exception occurred in communication framework:Error in HTTP Framework:405Method Not Allowed
    Log from BPM Web service
    Error: process()
    [EXCEPTION]
    com.sap.engine.interfaces.webservices.runtime.RuntimeProcessException: com.sap.engine.services.webservices.espbase.server.additions.wsa.WSAddressingException: com.sap.SOA.wsr.030104 - Expected request method POST. Found GET.
    Please share your solution..
    Regards,
    Yasin

  • Calling a proxy from ABAP Report

    Hi All,
    Can any one gimme some idea about calling a XI proxy from ABAP Report.
    I need to gather data in my internal table and after that i need to trigger a proxy which is going to do a outbound processing.
    Thanks in advance.
    Tnx,
    Joe.

    Hi Meetjoe,
      We have to design the required interface in PI ,that is used to hold the report data when tigerred a proxy and generate the proxy based on the interface if the Proxy is based on the Outbound side its called client proxy  or if the proxy is genereated on Inbound interface we call it server proxy.
    need to gather data in my internal table and after that i need to trigger a proxy which is going to do a outbound processing.
      In your case its gonna be the client proxy refer the follwing links for your better understanding
    For concepts on Proxies:
    http://help.sap.com/saphelp_nw04/helpdata/en/02/265c3cf311070ae10000000a114084/content.htm
    To enable Proxy connections:
    https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/50d69314-1be0-2b10-11ab-8045021f0c3a
    Smaple scenarios on Proxy:
    Proxysettings /people/vijaya.kumari2/blog/2006/01/26/how-do-you-activate-abap-proxies
    ABAP Server Proxy /people/siva.maranani/blog/2005/04/03/abap-server-proxies 
    ABAP Client Proxy /people/ravikumar.allampallam/blog/2005/03/14/abap-proxies-in-xiclient-proxy 
    Thanks,
    Ram.

  • IP - Is it possible to call exit planning function from ABAP Report..

    Hi All,
    Greetings.
    Is it possible to call exit planning function from ABAP Report (t-code SE38) ? Or I mean is not limited only to be called from ABAP Report, perhaps from BSP / Web-Dynpro / Function Module.
    If somebody here has been doing it before, I'm keen to ask to kindly share it. Particularly how to call and transfer data to that exit function.
    Or if somebody has done in BPS, appreciate if it can be shared too .
    Thanks a lot and have a good day,
    Best regards,
    Daniel N.

    Hi.
    You can achive this as suggested by Mattias in your previous post.
    Lets say you have next data structure:
    CostCenter | Amount | PercentForDistibution |
    Create input ready query in this format. Restrict cost center by variable type range.
    Create WAD with analysis item.
    When you run web page you enter range of cost centers (lets say you will enter 101004 to 101010).
    I assume you have data only for 101004 in your cube (lets say 1000).
    You will see only one record in your webpage.
    CostCenter | Amount | PercentForDistibution |
    101004       | 1000     | NOTHING
    When you create WAD in analysis item properties set "NUMBER_OF_NEW_LINES" to lets say 1 (so in WAD you will see always one blank line for entering new data).
    Just add 6 new records:
    CostCenter | Amount   | PercentForDistibution |
    101005       | NOTHING| 10
    101006       | NOTHING| 30
    101007       | NOTHING| 20
    101008       | NOTHING| 25
    101009       | NOTHING| 5
    101010       | NOTHING| 10
    Then run planning FOX function like this:
    FOREACH Z_COST_CENTER.
    IF {Amount, Z_COST_CENTER} <> 0
    Z_AMNT_TO_DISTRIBUTE = {Amount, Z_COST_CENTER}.
    ENDIF.
    ENDFOR.
    FOREACH Z_COST_CENTER.
    IF {PercentForDistibution Z_COST_CENTER} <> 0.
    {Amount, Z_COST_CENTER} = Z_AMNT_TO_DISTRIBUTE * {PercentForDistibution Z_COST_CENTER}.
    ENDIF.
    ENDFOR.
    It is not perfect FOX, but as an idead, it should work.
    Regards.

  • How to download data in excel from web report in sap ?

    how to download data in excel from web report made  in sap abap?
    through tcode smw0.

    for exemple using
    MS_EXCEL_OLE_STANDARD_DAT

  • Calling and manipulating data on an Interactive Adobe form from ABAP report

    Dear All,
    Can you please tell me how to call an interactive adobe from from a custom adobe form?
    If so how can we pass and receive data between the interactive adobe form and the abap report program?
    Thank you.
    Regards,
    Prosenjit.

    Hi,
    It is possible to call an Interactive Adobe form from ABAP report and pass data into the form. If you search the forum, you will get many threads explaining the process. Let me know if you have any specific questions on this.
    Regards,
    Sanoosh

  • How to submit a concurrent request from Discoverer report.

    I would like to know If any one has tried submitting a concurrent request from Discoverer Report?_
    This is no stupid question, but our team here finally decided with a solution to our long pending issues with few of the discoverer report. To Proceed further, we would like to know, how to submit a concurrent request from Discoverer report?
    We are looking for calling a package from the Disco admin by passing the parameters from the disco to the 6i report.
    All help us in this regards are much appreciated.
    Kindly help us in the same!
    Thanks
    Arun

    Thanks Rod for confirming the same.
    I will be trying the same today and will let you know if I succeed in doing it.
    If I can share the actual requirement with you, it goes like this.
    "I will be triggering the Oracle 6i standard AP Trail balance report through the Disco report. The standard report will be inserting the required data to one of my custom table. Once the concurrent program completes normal, my custom table will be having the required data to create the workbook specific to the current run of the concurrent program.
    The one problem which I think could happen is, How can I make my disco report to wait till the standard program to complete in normal so that my disco report can be generated with the data from custom table.
    Will the above requirement is possible If I follow the way you mention in the PDF or Could you suggest a better way for achieving the same.
    In short, my requirement is: The custom table(say XX_TABLE) will be populated with data when the standard 6i report is run and the disco admin will be making of the custom table (XX_TABLE) to generate the report.
    Please advice.
    Thanks
    Arun

  • CALL BSP from ABAP report

    I want to execute a BSP from ABAP report. The BSP is the standar CRM CASE MANAGEMENT BSP.
    I have a CRM CASE list in ABAP report and when I make double-click on one case i want to call BSP to show this case. I don't want to execute the GUI transaction CRMD_CASE. I need to execute the BSP.

    Hello Ivan,
    To call the BSP from the ABAP report following thread will be helpful for you.
    Call BSP from SE38 Program ?
    Regards
    Aashish Garg
    Message was edited by:
            aashish garg

  • Calling custom Infotype method from ABAP report

    Hi Experts,
    I am working on an application where i need to call a method of a custom defined infotype.
    I have done this -->
    1. Create a custom infotype 9111
    2. SAP creates a class of that infotype ZCL_HRPA_INFOTYPE_9111
    3. Inside this method there are few inherited method which provide me functionality of insert , update , delete
    i want to call methods IF_HRPA_INFTY_BL~MODIFY,
    IF_HRPA_INFTY_BL~INSERT
    However when i call these method from abap report this method does not work.
    where as when i try to insert an entry using PA30 transaction it works.
    Does anyone know why does this happen and what is the solution?
    Regards,
    Ashish Shah

    Hi,
    This is the code we are using. Just calling the read and modify methods of the check class. Very simple actually .. we just want once update/insert to work but it does not.
    <CODE>
    REPORT  ZTESTRAD_WD.
    FIELD-SYMBOLS <p9106> TYPE p9106.
    DATA : infty_container_tab TYPE hrpad_infty_container_tab ,
           message_list        TYPE REF TO cl_hrpa_message_list,
         w_ok type boole_d  ,
         ref_class TYPE REF TO ZCL_HRPA_INFOTYPE_9106,
         container        TYPE REF TO if_hrpa_infty_container,
         it9106_container TYPE REF TO cl_hrpa_infotype_container,
         p9106_ref        TYPE REF TO data,
        busilog type ref to if_hrpa_masterdata_bl.
    CREATE OBJECT  message_list.
    TRY.
            CREATE OBJECT ref_class
              EXPORTING
                tclas = 'A'
                infty = '9106'.
          CATCH cx_hrpa_violated_assertion .
            write :/ 'Error during initialization'.
      ENDTRY.
    call method cl_hrpa_masterdata_bl=>get_instance
       importing
         masterdata_bl = busilog.
    TRY.
    CALL METHOD ref_class->IF_HRPA_INFTY_BL~read
      EXPORTING
        tclas           = 'A'
        pernr           = 'XXXXXXXX'
        infty           = '9106'
        begda           = sy-datum
        endda           = sy-datum
        no_auth_check   = abap_true
        message_handler = message_list
      IMPORTING
        container_tab   = infty_container_tab
        is_ok           = w_ok.
    CATCH cx_hrpa_violated_assertion .
       WRITE :/ 'Infotype could not be read'.
    ENDTRY.
    *" Fill the local structure with container data:
      loop at infty_container_tab into container.
        it9106_container ?= container.
        TRY.
        CALL METHOD it9106_container->primary_record_ref
          IMPORTING
            pnnnn_ref =  p9106_ref.
         CATCH cx_hrpa_violated_assertion .
        ENDTRY.
        ASSIGN p9106_ref->* to <p9106>.
        write :/ <p9106> .
      endloop.
    *" Just change some field values of the record
      <p9106>-C1name2 = 'Test name'.
      <p9106>-C2name2 = 'Test name 2 3 4'.
    data : return TYPE BAPIRETURN1,
           return1 TYPE BAPIRETURN1.
    *CALL FUNCTION 'BAPI_EMPLOYEE_ENQUEUE'
    EXPORTING
       number        = <p9106>-pernr
    IMPORTING
      RETURN        = return1
    *PERFORM do_nothing(sapfp50p).
    The container itself is modified
      container ?= it9106_container->modify_primary_record( <p9106> ).
    CREATE OBJECT message_list.
    the invocation - errors are always fatal !!!
      DATA : lx_exception  TYPE REF TO cx_root,
             update_mode type HRPAD_UPDATE_MODE,
             massn type massn,
             massg type massg.
      TRY.
          CALL METHOD ref_class->IF_HRPA_INFTY_BL~MODIFY(
            EXPORTING
               old_container =                   it9106_container
               massn                          = massn
               massg                         = massg
               update_mode =                 update_mode
               no_auth_check =                   'X'
               message_handler =                 message_list
            IMPORTING
               is_ok =                           w_ok
            CHANGING
               container =                       container
        CATCH cx_hrpa_violated_assertion INTO lx_exception.
          RAISE EXCEPTION TYPE cx_wd_no_handler
            EXPORTING previous = lx_exception.
      ENDTRY.
    </CODE>
    I have also tried by instantiating the cl_hrpa_masterdata_bl and then calling the methods on that object...... makes no difference.
    I used this link to proceed with the modifications:
    http://help.sap.com/saphelp_erp2005/helpdata/en/43/21d2254bba2bebe10000000a1553f7/frameset.htm
    The funny thing is that the WHOLE logic executes without any error messages or dumps or anything. I have now debugged almost every line of code that these methods call. PA30 works just fine. HR_INFOTYPE_OPERATION does not .. that's a whole differnt story.

  • How to open a brfplus Catalog from abap webdynpro screen.

    How to open a catalog from abap web dynpro application. and also what roles are to be provided to a user for restricting access only to the objects in the given catalog.

    Hi Pratik,
    do you use NetWeaver 7.0, Enhancement Pack 2 (or higher)?
    Then you can then define an own UI mode class and set it via SET_UI_MODE( ) in IF_FDT_WD_UI_EXECUTION before you call EXECUTE_CATALOG_BROWSER().
    An explanation how to define a UI mode class is available in the chapter "Configuration through a UI mode class (7.0/7.1 EHP2)" of the document [Embedding a BRFplus Object in an ABAP WebDynpro Application|http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/50e44bf9-9135-2d10-2ea2-b13e5be8661d]
    Hint: With help of the interface IF_FDT_WD_USER_CONFIGURATION you have the possibility to hide views in the navigation view by using the respective, listed parameters (e.g.. GC_PARAMETER_FAVORITES_VIEW). Please be aware of that the configuration is just available to adapt the UI, it does not fulfill the requirements to act as an authority concept. If you do not set the parameter GC_PARAMETER_HIDE_SETTING_DLG of the interface IF_FDT_WD_CONFIGURATION to false, the user is also able to change it via the configuration dialog in the BRF+ workbench.
    With the current available BRF plus standard authority concept you can prevent that the user can see the content of objects like applications but you have no influence to prevent the user from seeing UI artifacts like the repository tree. Please consult the documentation to learn more about its capabilities.
    Kind Regards,
    Marco

Maybe you are looking for