How to trigger Linksys SPA 942 to send the info configured in Conference Bridge URL?

According to the Adminstration Guide for Linksys SPA 942, Conference Bridge URL field under EXT tab should be used to join into a conference call.  However, when I press on CONF or confLx, I do not see the Conference Bridge URL gets sent in the INVITE message.  Is there anything special I need to do to trigger the Conference Bridge URL to be sent?

Conference Bridge URL is the URL used to join into a conference call, generally in the form of the word “conference” or “user@IPaddressort”. By default it is blank so you need to fill the specific user and IP address with the appropriate port for the said settings to work. I further look into this matter and maybe you can be guided with this via this link: 
https://www.myciscocommunity.com/thread/1457 
Other than that I suggest contacting Cisco Tech support to further look into your concern. I believe this unit belongs to the business series devices that Cisco is now supporting. Try to go to this link for the other business series devices and the site where you can get hold of Cisco for support: 
http://www.cisco.com/web/products/linksys/index.html

Similar Messages

  • I have three iPads and one iPod and one iPhone.  How can I message between them without sending the message to all of them.  You send the message to your email address but all of them are set up und one account.

    I have three iPads and one iPod and one iPhone.  How can I message between them without sending the message to all of them.  You send the message to your email address but all of them are set up under one account.

    You can have a different receiving email in the Messages app on each device : Settings > Messages > Receive At . I'm not sure that there is a different way to have the message only go to one device.

  • I need to restore my apple ID, but it send the info to the wrong e-mail when that e-mail isn't on my ID information. How do I send it to the correct e-mail?

    I need to restore my apple ID, but it send the info to the wrong e-mail when that e-mail isn't on my ID information. How do I send it to the correct e-mail?

    How can it sent it to the wrong email address? Apple sends it to the email address listed in the information you provided for your account. Thus, I really do not understand your problem.
    Maybe this will help.
    Frequently Asked Questions About Apple ID

  • I am trying to recover my iTunes security questions, but my only option is to send the info link to an e-mail I do not have access to on weekends...

    I am trying to recover my iTunes security questions, but my only option is to send the info link to my work e-mail.  I won't be at work until Monday.  Any suggestions on changing this option?

    Hi Carollmt,
    I love sharing playlists with people too.  The instructions for syncing an iPod can be found at the following link:
    iTunes: Syncing media content to iPod
    http://support.apple.com/kb/HT1351
    If is the first time you are syncing your husband's iPod with your computer, it will remove his music currently on his iPod and replace it with the music you are trying to sync.  If you don't want to remove the music currently on your husband's iPod, you can transfer your music to his iTunes library using Home Sharing.  Expand the Home Sharing section in the following article for steps to setup Home Sharing and use it to transfer music:
    iTunes: How to move your music to a new computer
    http://support.apple.com/kb/HT4527
    Thank you for posting in the Apple Support Communities. 
    Best,
    Sheila M.

  • When I go to buy an app that isn't free it asks for my security question but I don't know what my security question is so I go to change it and it said it will send the info to this email that I don't even have. What do I do?

    When I go to buy an app that isn't free it asks for my security question but I don't know what my security question is so I go to change it and it said it will send the info to this email that I don't even have. What do I do?

    Alternatives for Help Resetting Security Questions and/or Rescue Mail
         1. If you have a valid rescue email address, then use this procedure:
             Rescue email address and how to reset Apple ID security questions.
         2. Fill out and submit this form. Select the topic, Account Security. You must
             have a Rescue Email to use this option.
         3. This is the only option if you do not already have a valid Rescue Email.
             These are telephone numbers for contacting Apple Support in your country.
             Apple ID- Contacting Apple for help with Apple ID account security. Select
             the appropriate country and call. Ask to speak to the Account Security Team.
         4. Account security issues almost always require you to speak directly to an
             Apple representative to securely establish your identity as the account holder.
             You can set it up so that Apple calls you, either immediately or at a time
             convenient to you.
                1. Go to www.apple.com/support.
                2. Choose Contact Support and click Contact Us.
                3. Choose Other Apple ID Topics and choose the appropriate topic for
                    your issue.
                4. Follow the onscreen instructions.
             Note: If you have already forgotten your security questions, then you cannot
             set up a rescue email address in order to reset them. You must set up
             the rescue email address beforehand.
    Your Apple ID: Manage My Apple ID.
                            Apple ID- All about Apple ID security questions.

  • Who to send the infos to in order to get my serial number?

    I want to send a copy of mybill by email to you to get my serial number for adobe cs5. I don't have access to camera or fax so who do I send the infos to to get that serial number before I throw the Pc against a wall

    Hi MokaPuce68,
    If you have registered your product with Adobe previously, you will be able to find your serial number after you log into your account. Look for the serial number in the My Accounts section.
    If you have not registered your product, get in touch with Adobe Support. You can find more information in this article http://helpx.adobe.com/x-productkb/global/my-serial-number-doesnt-work.html.
    This document has a chat link using which you can directly get in touch with support. Do get back in case if you still need more help.
    Thanks,
    Preran

  • Linksys Spa 942 IP phone setup

                       I have (qty 7) linksys spa942 phones connected to a router that gets internet access directly from the modem.  I'm trying to find out what others setups people have and how it is done.  Do you propgram the phone directly? Do you program a Voip box such as the spa9000?  What companys are compatible and work the best with these phones.?  We need the phones to make outgoing calls and receive calls.  The ability to setup hunt groups would be helpful too.  Let me know if theres any info I'm leaving out that would be needed to help me resolve this issue.  Very desperate to get some help please.

    Hi Ken,
    For ease of management it is usually better to purchase a VOIP service (ITSP). A lot of time when purchasing a hosted service, they will provision the phones for you and you do not really have to configure anything.
    Voice service options will range and the prices vary of course. If you are supplying the phones and the ITSP is supplying the service, typically the provider will supply you with a proxy, user id and password which you manually configure on each phone. If the provider also provides the phones, they are usually pre-configured and plug and play (generally speaking).
    The SPA9000 is EOS/EOL for quite sometime and was replaced by the UC320. To my knowledge the SPA9xx phones are not supported by the UC320. So it would seem the hosted service would be a good route for you.
    -Tom
    Please rate helpful posts

  • How to create xml file from Oracle and sending the same xml file to an url

    How to create xml file from Oracle and sending the same xml file to an url

    SQL/XML (XMLElement, XMLForest, XMLAgg, etc) and UTL_HTTP.
    Whether that works for you with the version of Oracle you have, your requirements, and needs is another story. A little detail goes a long way.

  • How to specify in what coding to send the letter?

    How in SOAP protocol to specify in what coding to send the letter?
    It is necessary for me to send letters outside in coding UTF-8
    Serg

    Thank your
    The accurate and clear answer!
    I will wait FTF or gw8.0.3.
    Serg
    Originally Posted by Preston Stephenson
    Sorry, I'm not sure what the question is.
    I can see that you are using 8.0.2 HP3 (build 96933).
    You will need a later version than that.
    Either an FTF file or wait for 8.0.3.
    You will need a build of the agents greater or
    equal to 97527.
    There is no work around. (You can not get around
    the problem until you get a build later than
    8.0.2 HP3.)
    Preston
    >>> On Tuesday, December 20, 2011 at 4:26 AM,
    skoltogyan<[email protected]> wrote:
    > Thank your for answer.
    > Now we try to send letters from the program written by us.
    > We try to send letters on SOAP protocol through POA.
    > Letters it is sent exterior (example ‑ to the [email protected]) to
    > users.
    >
    > At sending from the program the text of the letter and a letter body is
    > sent п UTF‑8.
    > Of it were convinced with the help tcpdump.
    > tcpdump servers with POA applied directly on eth0.
    > Look:
    > 1) from WS ‑> Server
    > #o]E* @_G~PPOST /soap HTTP/1.1
    > User‑Agent: Mozilla/4.0 (compatible; MSIE 6.0; MS Web Services Client
    > Protocol 2.0.50727.5448)
    > Content‑Type: text/xml; charset=utf‑8
    > SOAPAction: "sendItemRequest"
    > Host: 172.16.16.230:7191
    > Content‑Length: 879
    > Expect: 100‑continue
    >
    > 2) Answers from Server to WS:
    > ================================
    > ]#oE_@@`Pnz`HTTP/1.1 200
    > Date: Fri, 16 Dec 2011 11:39:27 GMT
    > Server: Linux GroupWise POA 8.0.2
    > Content‑Type: text/xml; charset=utf‑8
    > Content‑Length: 715
    > =============================
    > ]#oE_@@^bPn|Pragma: no‑cache
    >
    > <?xml version="1.0" encoding="UTF‑8"?><soap:Envelope
    > xmlns:xsd="http://www.w3.org/2001/XMLSchema"
    > xmlns:xsi="http://www.w3.org/2001/XMLSchema‑instance"
    >
    xmlns:soap="http://schemas.xmlsoap.org/soap/envelope/"><soap:Body><loginResp
    > onse
    > xmlns:gwt="http://schemas.novell.com/2005/01/GroupWise/types"
    >
    xmlns="http://schemas.novell.com/2005/01/GroupWise/methods"><session>J3fTBX
    > KWBLSiAud8</session><userinfo><gwt:name>Ami
    >
    Common</gwt:name><gwt:email>[email protected]</gwt:email><gwt:uuid>BC486580‑06D2
    0000‑9A57‑
    > 6D006200E000</gwt:uuid></userinfo><gwVersion>8.0.2
    >
    </gwVersion><build>96933</build><serverUTCTime>2011‑12‑16T09:39:27Z</ser
    verUTCTime><s
    >
    tatus><gwt:code>0</gwt:code></status></loginResponse></soap:Body></soap:Enve
    lope>
    > ===============================
    >
    > 3) from WS to Server
    > ===============================================
    > #o]E* @_G~PPOST /soap HTTP/1.1
    > User‑Agent: Mozilla/4.0 (compatible; MSIE 6.0; MS Web Services Client
    > Protocol 2.0.50727.5448)
    > Content‑Type: text/xml; charset=utf‑8
    > SOAPAction: "sendItemRequest"
    > Host: 172.16.16.230:7191
    > Content‑Length: 879
    > Expect: 100‑continue
    > ==============================
    > #o]E @\~P<?xml version="1.0" encoding="utf‑8"?><soap:Envelope
    > xmlns:soap="http://schemas.xmlsoap.org/soap/envelope/"
    > xmlns:xsi="http://www.w3.org/2001/XMLSchema‑instance"
    > xmlns:xsd="http://www.w3.org/2001/XMLSchema"><soap:Header><session
    > xmlns="http://schemas.novell.com/2005/01/GroupWise/types">J3fTBXKWBLSiAud
    > 8</session></soap:Header><soap:Body><sendItemRequest
    > xmlns="http://schemas.novell.com/2005/01/GroupWise/methods"><item
    > xmlns:q1="http://schemas.novell.com/2005/01/GroupWise/types"
    >
    xsi:type="q1:Mail"><q1:delivered>0001‑01‑01T00 :00:00</q1:delivered><q1:s
    ubject></q
    >
    1:subject><q1:distribution><q1:recipients><q1:reci pient><q1:email>skoltogyan
    @gmail
    >
    ..com</q1:email></q1:recipient></q1:recipients></q1:distribution><q1:message>
    <q1:part
    >
    length="39">0KjQsNC/0LrQsCEKCtCi0LXRgdGCLgoK0J/QvtC00L/QuNGB0Ywu</q1:part></
    > q1:message></item></sendItemRequest></soap:Body></soap:Envelope>
    > ===========================================
    >
    > 4) Answer from Server to WS
    > ]#oE_@@`~P%z`HTTP/1.1 200
    > Date: Fri, 16 Dec 2011 11:39:27 GMT
    > Server: Linux GroupWise POA 8.0.2
    > Content‑Type: text/xml; charset=utf‑8
    > Content‑Length: 458
    >
    >
    > At a workstation (WS) ‑ the program written by us works.
    > This program on SOAP protocol through POA transfers letters outside the
    > GroupWIse.
    > Which data is transferred thus on SOAP protocol has shown above.
    >
    > In what a question (problem) what exactly is impossible:
    > The letter from station on SOAP protocol is normally transferred in
    > POA. Further through GWIA it is normally delivered to the receiver(
    > skoltogyan @ gmail ).
    > However to the receiver (the exterior receiver) the letter comes in the
    > coding(with header):
    > ..
    > Subject: =?ISO‑8859‑5?B?wtXh4g==?=
    > Mime‑Version: 1.0
    > Content‑Type: text/plain; charset=ISO‑8859‑5
    > Content‑Transfer‑Encoding: base64
    > Content‑Disposition: inline
    > ...
    > (this is from my foriegn groupwise mailbox in the gmail)
    >
    > That is necessary: that such letter came in the coding (with Header):
    > ...
    > To: <[email protected]>
    > Subject: =?UTF‑8?B?0YLQtdGB0YI=?=
    > Mime‑Version: 1.0
    > Content‑Type: text/plain; charset=UTF‑8
    > Content‑Transfer‑Encoding: 8bit
    > Content‑Disposition: inline
    >
    > That it is necessary to add in request on SOAP. What the letter,
    > leaving in the Internet through gwia went in such type ?
    >
    > Serg

  • How to send the username logged in to a URL

    Hi everyboy!
    I have a question about ORacle Portal version 10
    I have created a portlet which contains a page, in this page have several URL. This URL can be jsp, asp, etc.
    Do you know how to send the username to the URL?,
    I want to send the username in a parameter.
    Is it necessary create an omniportlet?
    How do I must do?
    I expect your prompt reply, any help will be very appreciated.
    Thank you in advance.
    Best Regards

    Hi Angrydot
    Thank you for helped me,
    But I want that the username be stored in a parameter and this parameter must be sent by method post.
    In the oracle portal when I created the URL I only want to write only url, without writting ?variableusername=valuevariableusername.
    How do I must create this variable?
    Any help will be very appreciated.
    Best Regards

  • Use apple script to get the duration of soundfiles and send the info to FileMaker

    I have close to 6000 soundfiles in approx. 20 subfolders of a folder called soundarchive and a FileMaker DB of all those files. Here's what I'd like to do. Get the duration of each file and send it to the "duration" field of the matching FMrecord. I don't know a lot about AppleScript (or programming anything apart from my HD recorder), what I do know is that a script will save me from a week of copy-pasting the info manually. I found a script by hubionmac  that does the first part (for one file) it goes like this:
    set aFile to choose file
    tell application "Finder" to set filename to name of aFile
    set AppleScript's text item delimiters to " = "
    set duration to text item 2 of (do shell script "mdls -name kMDItemDurationSeconds " & quoted form of (POSIX path of aFile))
    set AppleScript's text item delimiters to "."
    set total_seconds to text item 1 of duration
    set AppleScript's text item delimiters to ""
    set showsec to (total_seconds as integer) mod 60
    set showmin to (total_seconds as integer) div 60
    display dialog filename & return & return & "Duration:" & return & showmin & " min " & showsec & " sec"
      So this is for one file. How do I get the information for the other 5000+ files and send it to the FileMaker DB. Obviously the "display dialog" won't do so it'll have to be changed to something like "get". How do I proceed from here?

    Hi Preetha7,
    I found one automated SQL Server Health Check Solution which may meet your needs. The daily health checks include checking CPU utilization, database status, available disk space, network packet errors, database backup status, and more. For more detail about
    this solution, please refer to the following article:
    http://sqlmag.com/database-administration/automated-sql-server-health-check-solution
    In addition, if you want to write your own script to perform a quick health check of SQL Server using PowerShell, please refer to the following article:
    http://blogs.technet.com/b/heyscriptingguy/archive/2011/07/25/use-powershell-to-monitor-your-sql-server-performance.aspx
    If you have any question, please feel free to let me know.
    Regards,
    Jerry Li

  • How to get  x and y coordinates in the info pane through PS API

    Hi all,
    I'd like to get the x,y coordinates of cursor pointer while mouse moving, just like the info pane do.
    Can anyone tell me how to achieve this?

    If you are using Actionscript 3 you should
    1) Use event listeners to detect mouse-down and mouse-up
    events on the movieclip.
    2) Set up functions to drag and drop the movieclip.
    3) In the drop function get the x and y position of the
    movieclip and
    4) trace it out or put the values into dynamic textfields.
    Here's a simple example. The code is on the first frame of
    the timeline
    myMC.addEventListener(MouseEvent.MOUSE_DOWN,
    startDragSquare);
    myMC.addEventListener(MouseEvent.MOUSE_UP, stopDragSquare);
    function startDragSquare(evt:MouseEvent):void
    this.startDrag();
    function stopDragSquare(evt:MouseEvent):void
    this.stopDrag();
    var xpos = this.x;
    var ypos = this.y;
    trace ("X: "+xpos+", Y: "+ypos);
    }

  • My MacBook laptop will suddenly instruct me to shutdown. A black transparent message appears and instructs me to shutdown. Then when I reboot, it tells me to send the info to Apple. What is causing this to happen?

    MacBook laptop suddenly posts a black transparent message on my screen in several different languages instructing me to shutdown the computer. After rebooting, another message appears instructing me to send the information to Apple. This has begun to happen on a regular basis. What is the issue?

    That's a kernel panic. the cause can be a software conflict or a hardware problem, so it's not easy to say without more information what can be done.
    Here is the Knowledgebase article which may help you diagnose the problem;
    http://support.apple.com/kb/TS3742
    If you need further help to understand the article or need clarification on any points, by all means post back here.

  • How to trigger a WLPI workflow by sending XML event

    Hi,
    I try to trigger a workflow in WLPI 2.1 by sending an XML Event from another application.
    But I don't know where to send it and how (i.e. via JMS or not).
    Any idea how to do it or where I can find helpful documentation (standard BEA
    WLPI docs didn't help much on that topic)?
    Regards,
    Jörg

    Hi,
    Still, what is so specific about this ACE_DISPATCHER in CRM? Can you explain a bit more about you problem. I am quite sure that not that many people in this workflow forum is familiar with this concept.
    Is there some problem in triggering the batch job itself? I still cannot see any reason why you couldn't use the check function module? If you cannot use check function module, what makes you think that some other solution would work. Eventually you will use the same code - the place where you trigger the code might be different, but it will be the same code.
    Regards,
    Karri

  • Received an error message Mail server didn't recognize your user/passwork combination. How you I change my password to send the email?

    Tried to send a photo, received error message The email server didn't recognize your user/password combination.  How do I correct the password?

    Mail -> Preferences -> Accounts -> Account Information -> Password.  Tho' if it has been working in the past and suddenly you're getting this message without you having changed anything in your settings then it may be a problem at the server end.  If that's the case then leave it a few hours and try again.  If the problem persists after 24 hours then try changing your settings.

Maybe you are looking for