How to troubleshoot apache

What are some steps to troubleshoot to see if apache is working?

Was it your hosts file or your Apache vhosts file that was a symbolic link? In either case, that is below what Firefox or Safari would ever see.
It sounds like you did not include IPv6 addresses in your vhosts file. Safari prefers IPv6 and would error out whereas Firefox would only look at IPv4.

Similar Messages

I am running on OSX 10.10.1 and have a 2009 imac intel and I am having severe latency issues. I am not familiar with macs as this is my home computer used by other family members. Any help on how to troubleshoot why such latency issues?

I am running on OSX 10.10.1 and have a 2009 imac intel and I am having severe latency issues. I am not familiar with macs as this is my home computer used by other family members. Any help on how to troubleshoot why such latency issues?

When you see a beachball cursor or the slowness is especially bad, note the exact time: hour, minute, second.
These instructions must be carried out as an administrator. If you have only one user account, you are the administrator.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad and start typing the name.
The title of the Console window should be All Messages. If it isn't, select
          SYSTEM LOG QUERIES ▹ All Messages
from the log list on the left. If you don't see that list, select
          View ▹ Show Log List
from the menu bar at the top of the screen.
Each message in the log begins with the date and time when it was entered. Scroll back to the time you noted above.
Select the messages entered from then until the end of the episode, or until they start to repeat, whichever comes first.
Copy the messages to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
The log contains a vast amount of information, almost all of it useless for solving any particular problem. When posting a log extract, be selective. A few dozen lines are almost always more than enough.
Please don't indiscriminately dump thousands of lines from the log into this discussion.
Please don't post screenshots of log messages—post the text.
Some private information, such as your name, may appear in the log. Anonymize before posting.

How to Troubleshoot iTunes 10.6 Download Failure in Firefox 14.0.1 ??

How to Troubleshoot iTunes 10.6 Download Failure in Firefox 14.0.1 ??
posted Thursday, 02 August 2012 at 07:43AM PDT, by Matthew B. | @QHereKidSF
SIMPLY-PUT !!
I am desperate to know of any possible workaround solutions that might resolve inexplicable failure(s) to download iTunes 10.6 (http://www.apple.com/itunes/download/) in Mozilla Firefox 14.0.1 Browser for Windows 7 (64-bit) OS...!!
FURTHER DETAILED !!
In an aimlessly ill-informed effort to troubleshoot the "Please install Apple Application Support" ERROR Message reported subsequent to my numerous attempts to "repair/install" the most recent and otherwise previously up-to-date versions of Apple QuickTime & iTunes on my HP Pavilion dv4 Entertainment Notebook PC, running on the Windows 7 (64-bit) OS... I mistakenly (perhaps?) thought it wise to attempt to execute a complete uninstall/reinstall of both QuickTime & iTunes. Oops... YIKES !!
Somewhere along the knotty entangled threads of my most circuitous web-research, as I browsed for information and instructional resources regarding proper procedure for (re)-installing Apple Application Support (amongst other peripheral software programs provided by Apple, Inc. as integral technical components essential to seamless & successful installation, application and operation of the most current/up-to-date versions of Apple QuickTime & Apple iTunes), I seem to recall reading explicit suggestions from well-rated community support contributors to proceed with the aforementioned course of action...
Unfortunately, now that I no longer have either Apple QuickTime or iTunes currently installed on my Win7OS HP Pavilion Notebook PC, I continue consistently to fail at initializing either a functional download or installation solely of iTunes 10.6 -- so far!!
When I link to the Apple iTunes 10.6 Download URL (listed herein, above!) and click the (blue) DOWNLOAD NOW Button located near mid-center of the left-sidebar in the presumably appropriate/correct browser tab window (fully framed and immediately visible in maximized view, on my screen), what seems then to occur is pretty much what one could only image/explain &/or describe as "zip/zilch, nothing/nada, absolute silence, stillness: a blatantly obvious failure to initiate functional download of anything at all, whatsoever...!!"
Not a single hint of code or even a mere bleep/beep/blink/blip in my Win7OS or HP Pavilion Monitor Display appears before for me; ultimately, suggesting without any real certainty whatsoever that a download of the iTunes 10.6 Software Installation Package has perhaps initialized, successfully...!!?
WHAT TO DO? What to do? ...ARGGHHH !!
I am desperate to find a workaround solution with which to troubleshoot and ideally resolve these persistent difficulties I continue to encounter when attempting to download iTunes 10.6 via Mozilla Firefox 14.0.1 on the Win7OS (64-bit) of my HP Pavilion dv4 Entertainment Notebook PC!!
Might there possibly be anyone -- anyone, at all!! -- out there, somewhere amidst the knotty entangled nets broadly cast far'cross the endlessly great and expansive waves of this worldwide cyberspace we share, who perhaps would know of a proper workaround fix with which I might troubleshoot my current web-computing technology crisis??
If indeed so, please do come diving face-first forward toward me... with any decent amount of valuably trustworthy information, instruction, advice, guidance, support or even encouragement that you might be readily willing and able to provide!! Please, please...!!?
Any worthwhile, effective assistance that's provided to me (in as short an order as possible) would be most sincerely appreciated & acknowledged widely across the web by me... with resounding cries of humble recognition, admiration, and deeply indebted gratitude!! At least, that's only as much as I can so far surmise to guarantee, at this point -- thus far and so moving forward!!
Yes, indeed...!! That's a promise which I intend to keep; should all issues be resolved well much for and in my favor, as well as much, much sooner rather than far-too much later -- hopefully, even by the end of the coming day; one might say... *sigh* Hehe. WINK/GRIN...
Boy o'boy, now... That sure would delight me to the nth-infinite degree, indeed! "As heck a'heaven-high: FOR SURE!!" I dare say...
<Edited By Host>

Do you have all pop-up blockers disabled?
FYI: Please lose all the formatting in your posts.Simply makes it very difficult to follow.

How to troubleshoot approval workflow of a rejected purchase order

Hi,
We are working in oracle applications 11i.
I have a purchase order with status rejected that has hanged up in the system. The user rejected PO and the document has not been transferred to the PO buyer. From the application forms -> Forward documents window, I can see that neither the user who rejected or the buyer has the document.
From System Administrator responsibility I can see that the workflow administrator can modify a PO that is only IN PROCESS,
what shall I do?

please check :
http://oracle.ittoolbox.com/groups/technical-functional/oracle-apps-l/how-to-troubleshoot-approval-workflow-of-a-rejected-purchase-order-4211332

Where/how to troubleshoot external gateway and internal connection brokers etc.??????

We have gateway.domain.org as our external/internal gateway server.
It goes from gateway.domain.org to rdbroker.domain.local, rdbroker is the DNS address for two connection broker servers.
After this it should set up the connection and create a remote desktop to one of the RDS host servers in the RDS host farm.
Sometimes this works, sometimes it doesn't -- for different user accounts and different computers.
How to troubleshoot this??
We know the firewall rules for DMZ etc. etc. are properly configured because everything IS observed to work, just not all the time consistently. We get errors about cannot contact the computer, cannot establish remote desktop connection...
Thank you, Tom

Hi Tom,
Firstly, you need to recheck the DNS entry is well setup for your case. Are you using DNS RR for Load balancing the server or 3rd party load balancer? Have you setup the proper certificate for your case?
Please check whether required ports is opened? We need to open TCP port 443 and UDP port 3391 and forward them to your RD Gateway server. Also need to specify the external FQDN of your RD Gateway server in deployment properties under RDS server manager. If
you have RDWeb and RDG on the same server this would be the same FQDN that your users will use for RDWeb. Please see whether you have properly configured RD RAP and RD CAP policy.
You can go through beneath article for more details.
Step by Step Windows 2012 R2 Remote Desktop Services – Part 3
https://msfreaks.wordpress.com/2013/12/26/windows-2012-r2-remote-desktop-services-part-3/
Hope it helps!
Thanks.
Dharmesh Solanki
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

How to configure apache for ssl in windows platform

hi all,
can anyone help me expalin how to configure apache for ssl in windows platform.

George,
I would take the following 'first steps'
1)Install Apache20 on your Windows machine following the Apache online documentation
http://httpd.apache.org/docs-2.0/misc/tutorials.html
2)Make sure you can 'serve up' static HTML content from your Apache Server
3)Install Weblogic Server per our online documentation
http://edocs.bea.com/wls/docs61/install/index.html
4)Also, make sure you can 'serve up' both static and dynamic (e.g., JSP) content
directly from WLS server
5)Once you have both of the above 'sanity' checks attempt to configure a simple
proxy by ppath or mime type via our online documentation
http://edocs.bea.com/wls/docs61/adminguide/apache.html#103803
Chuck Nelson
DRE
BEA Technical Support

The camera on my daughter's iPod Touch, 5th generation, doesn't work anymore. She just got it three weeks ago. Not even sure how to troubleshoot. Help.

the camera on my daughter's iPod Touch, 5th generation, doesn't work anymore. She just got it three weeks ago. Not even sure how to troubleshoot. Help.

Hard reset it and report back...thatll probably solve the problem

HT204291 3th. gen apple TV with 5.2.1 and mac mini with 10.8.3, only black screen on TV after selecting Apple TV on the airplay icon. how to troubleshoot?

I have a 3th Gen Apple TV and a late 2012 mac mini with IOS 10.8.3
- Connected thru HDMI to an ASUS monitor
- Apple tv connected with wire
- Mac Mini connected wireless.
- I can see the Airplay icon on the screen
- I can select my apple TV on the icon pull-down menu (first time it asked me for apple TV password)
- Once selected, my monitor resolution changes and apple TV goes to a blank screen. On the pull-down menu, my apple TV papears selected and the option "match desktop size to:" is selected for my Apple TV.
Any ideas on how to troubleshoot?
Additional Info:
- I can stream from iTunes music with no problem
- From an Air (on same wireless network) I can mirror my display. And form iPad and iPhone I can stream video and music.

Welcome to the Apple Community.
Try the following steps, check whether things are working after each step where appropriate, before trying the next.
Check AirPlay is turned on on the Apple TV (turn it off and on if it already is)
Check that both devices are on the same network (Settings > Wifi, on the mobile device and Settings > General > Network, on the Apple TV).
Restart the Apple TV (Settings > General > Restart).
Restart the Apple TV by removing ALL the cables for 30 seconds.
Restart your router. (Also try removing it’s power cord for at least 30 seconds)
Restart your mobile device.
If you are still having problems, the following article(s) may help you.
Troubleshooting AirPlay
Troubleshooting Wi-Fi networks and connections
Recommended Wi-Fi settings
Wifi Diagnostic Software (for Mac users)
You may also find some help on this page, where I’ve collected some of the more unusual solutions to network issues.
When making adjustments to your network for better optimisation, you may find some of the points mentioned on this page helpful.

How to use Apache MyFaces components in JSF pages + Eclipse?

I've managed to write my JSF web app. in Eclipse jee, and test it on JBoss 4.2 GA, within Eclipse, but how to import Apache MyFaces components into Eclipse JSF plug-in?
If I can't import it nicely, how to use those components directly in JSF pages?

The Tomahawk component library provides MyFaces components. Install it as you would any other component library.
http://myfaces.apache.org/tomahawk/

TS3274 If I touch camera icon, the screen turns black instead of capturing image. Let me know how to troubleshoot.

If I touch camera icon, the screen turns black instead of capturing image. Let me know how to troubleshoot?

Try closing the Camera app:
1. Double-click the Home button to reveal the Task Bar
2. Hold down the Camera app for a second or two until you see the minus sign
3. Tap the minus sign to close app
4. Tap area above Task Bar to return to Home screen
If the above doesn't solve the problem, do a reset:
Hold the Sleep and Home button down for about 10 seconds until you see the Apple logo. Ignore the red slider

How to install Apache Server on Linux 10G for HTML DB 1.6

Hello,
i have Oracle 10g installed under Suse Linux. Apache needed to be installed too in the oracle home but isn't.
it's required for HTML 1.6 DB install.
i did not found it with the normal installation image, how to install Apache for Oracle? for 10G?
Regards
Carl

The Apache is on the Companion CD
http://www.oracle.com/technology/software/products/database/oracle10g/htdocs/linuxsoft.html
Also HTMLDB 1.5, so Install only the Application Server and add the HTMLDB 1.6 from separate Download

How to install Apache module mod_rewrite

Kindly tell me, how to install Apache module mod_rewrite which is a standard module in the Oracle HTTP Server (OHS).. I have installed OAS(10.1.2) but mod_rewrite module is missing..
Edited by: SrinivasanSeniorDBA on 26 Feb, 2010 2:42 PM

Got it

How to check apache pl/sql listener port

hai
can any tell me how to check apache pl/sql listener port
Thanks
BhanuChander

You may get it by searching the portlist.ini file in the ORACLE_HOME of the product you use.....
So , for instance the following , are the ports those of Dev_Suite_Home:
Oracle Developer Suite HTTP port = 8889
Oracle Developer Suite JMS port = 9240
Oracle Developer Suite RMI port = 23910
Oracle HTTP Server Diagnostic port = 7200
Reports Services bridge port = 14011
Reports Services discoveryService port = 14021But ... note that these ports are valid only at the time of installation....!!!!
Greetings...
Sim

Capacity exhausted "other." how to troubleshoot?

capacity exhausted "other." how to troubleshoot?

What is so big that it takes up 4.7 GB?
Audio: 6.0 GB photos, 3 GB Apps: 1.28 GB Others: 4.7 GB free: 0.74 GB

SIGSEGV (0xb) - How to troubleshoot?

We are trying to identify what is causing segmentation fault and particularly how to troubleshoot it?
The following exception is thrown on our server when under stress, which kills all running java processes.
# SIGSEGV (0xb) at pc=0x0000000000000038, pid=3082, tid=140191058470656
# JRE version: 6.0_24-b07
# Java VM: Java HotSpot(TM) 64-Bit Server VM (19.1-b02 mixed mode linux-amd64 compressed oops)
# Problematic frame:
# C 0x0000000000000038
Full error log at
http://pastebin.com/VzDfenY5
We are running on 64bit ubuntu linux with java 6 update 24, the same issue occurs on similar spec.'d machine running on java 6 update 22.
Any help appreciated.

With this SIGSEGV (Segmentation fault) error we were able to troubleshoot by debugging the code referenced in "Java frames:" subsection under THREAD section.
Therefore looking at Java frames: (J=compiled Java code, j=interpreted, Vv=VM code)
j java.lang.Thread.start0()V+0
j java.lang.Thread.start()V+32
j org.trippi.io.RIOTripleIterator.<init>(Ljava/io/InputStream;Lorg/openrdf/rio/RDFParser;Ljava/lang/String;)V+116
j org.trippi.TripleIterator.fromStream(Ljava/io/InputStream;Ljava/lang/String;Lorg/trippi/RDFFormat;)Lorg/trippi/TripleIterator;+98
Code suggests the exception was thrown while trying to create a new thread, within the org.trippi.io.RIOTripleIterator. The code here was re-factored to use thread pooling instead of creating new threads each time, see here https://jira.duraspace.org/browse/FCREPO-873 for more info. This helped reduced the SIGSEGV errors significantly although not completely.
Edited by: 843727 on 18-Apr-2011 05:00

How to troubleshoot apache

Similar Messages

Maybe you are looking for