How to troubleshoot iphone 5s connectivity issue with iTunes on Windows 7

When I connect my new iPhone 5s to my Windows 7 home edition PC with the latest version of iTunes, the PC recognizes it. From My Computer I can see a new item "iPhone", which can be opened to show internal storage (photos). However iTunes never sees my phone. If I run diagnostics from iTunes it reports that no devices are found. In the meanwhile, my iPad can connect and get recognized by iTunes without any problem.
What is missing?
Thanks.

Okay I found the solution - I'm still surprised this actually worked - which is to connect the phone through a powered USB hub. That's it! iTunes finally wakes up and syncs my phone!
I hope this helps those who might stumble over the same issue.
Cheers.

Similar Messages

  • IPhone 5s connection issues with iTunes, mail, internet

    Hi,
    Recently (yesterday), my phone stopped receiving new email on my multiple accounts (gmail, yahoo, etc.) I would open the mail app on my phone and get multiple pop up windows saying, "Cannot Get Mail, The connection to the server failed." I had similar trouble when I  then tried using other apps that use the internet, Safari, facebook. Keep in mind that both my mac book pro and device are connected to my wi-fi network. My mac book pro can access the internet and receive mail. I thought maybe connecting my device to iTunes would help, however my device can not be recognized by iTunes.   Upon connecting my device via USB iTunes would immediately say "Itunes cannot connect to this iPhone. Could not connect to this device." I then turned on my iPhone only to see a window saying "Trust This Computer?  Your settings and data will be accessible from this computer when connected"  I selected Trust multiple times but this keeps poping up. 
    Any help would be greatly appreicated.
    Serg

    Hello, ddogjackson. 
    Thank you for visiting Apple Support Communities.
    This sounds like you may be experiencing a self-assigned IP address.  Try power cycling your router and testing the results.  If the issue persists, I would recommend going through all of the steps in the article below.
    If your iPhone, iPad, or iPod touch won’t connect to a Wi-Fi network
    Cheers,
    Jason H.

  • Iphone wifi syncing issue with itunes 10.7

    My wife and I each have iphone 4's syncing on our respective computers running Win XP Pro SP3. After upgrading to itunes 10.7 and iOS 6, itunes doesn't reliably sync via wifi. It will sync once then won't a second time unless the computer is rebooted. If I try and click the sync button on itunes, it looks for the displayed iphone then says it can't find it and the iphone disappears.This is happening on both computers. I can direct connect the iphone with usb cable and sync, but it won't sync via wifi without rebooting. I've click the "sync with wifi" button off then on. Nothing works.
    We both upgraded to iphone 5's. It didn't solve the problem. I upgraded my computer to a new desktop running Win 8 Pro. Everything transferred fine and the initial sync went well, but the problem persists. After my iphone 5 sync'd with itunes overnight, the next morning it wouldn't sync again via wifi. Again, trying to initiate a sync from itunes caused the it to look for the iphone and not finding it, the iphone disappeared from itunes. Once I restarted Win 8 and itunes, the iphone showed up in itunes.
    It's not the iphones(it happened with both 4's and 5's), the computers(two differnet computers) or, the OS( happens with Win XP and Win 8) so it's got to be an isssue with iTunes 10.7 and possibly it's interaction with iOS 6. We didn't have the problem before 10.7 and iOS 6 (upgraded same time).
    Any suggestions? This is annoying to not have these reliably sync without intervention.
    Thanks,
    Z

    Just found another thread that helped...deleted the iTunes Library Genius file and now the Mac can load the library!

  • Ipod connection issues with itunes

    i know, i am the one-thousandth person to write in about a connection issue, but i just bought a 8gb nano. my pc is recognizing the ipod, but itunes does not automatically start.
    instead, if i manually try to start up itunes, it either doesn't start at all, or when it does, it immediately locks up. or it will try as hard as it can to sync and then locks up.
    once i disconnect the ipod from the usb port, itunes will come back to life. i have done EVERYTHING the support pages say, reinstalled itunes, dumped temp files, stopped conflicting software...everything short of sending in the new ipod to be serviced. please if you have run into this particular problem and/or you know how to fix this issue, please respond
    i don't really want to send a brand-freaking-new ipod off to be serviced b/c i think this is a software issue.

    Hello lalajamjam,
    It sounds like you've done a rather good job of troubleshooting already. Other than testing to see if the issue is user-specific per ( http://support.apple.com/kb/TS1717 ) and possibly testing the Nano on another computer, there are few additional steps to try prior to getting it serviced.
    Charles

  • 3GS iPhone Backup, Recognition Issues With iTunes 9.2

    Since "upgrading" to iTunes 9.2, our computer's iTunes can no longer successfully back up my 3GS iPhone (always encounters an "unknown error") and it will no longer recognize my husband's iPhone 3GS at all. Because I upgraded iTunes before installing the OS 4 iPhone update on my husband's iPhone (although not my own), it seems to me that the problem is with the iTunes software update itself, not the iPhone OS update. I searched the forums, and saw that others seem to be having similar issues, although I didn't see a solution anywhere. Does anyone know of a solution, and/or whether Apple is working out whatever this bug is with iTunes 9.2? UGH - so. frustrating. Thanks!

    just an fyi...i set up mobileme yesterday and had all my contacts, calendars, etc. synced and ready to go. so i hooked up my iphone to itunes and i "set up as new" and it didn't delete anything and it just synced fine.
    i'm not saying the same thing will happen to yours but it seems that just going through the new iphone setup as a new phone just worked. i wouldn't do a restore unless it's really recent.
    so, go ahead and try to just set up as new and you should be fine...i was.

  • HELP!!  Issues with iTunes and Windows 8.1.

    So I recently upgraded to a new laptop with Windows 8.1 and I have been experiencing some issues that I need assistance with. So far the issues I need help with are:
    When I try to get album artwork for my songs, it gets through a small fraction then just kind of freezes.I have a lot of songs and albums but I have never had this problem before.
    When I try to connect to the iTunes store, it takes quite awhile and then I am left with either a blank screen or album/song/etc. names and no pictures.And when I click on another link, it takes forever (again) and I experience the same issue while trying to travel to the new page.
    I don't know what else to do and I can't figure out a solution. Please help me!!!

    Hello RavensFan94
    For both your issues, it sounds like you are having a hard time connecting to the iTunes Store to get album artwork and viewing content. Check out the article below for some troubleshooting options to get it working again.
    Can't connect to the iTunes Store
    http://support.apple.com/kb/TS1368
    Regards,
    -Norm G.

  • Issues With itunes and Windows 7

    Hi All,
    I have just upgraded to Windows 7 and am having problems with itunes.
    When i installed the 64 bit version of itunes (my operating system is 64 bit) and select it i get an error saying "itunes.exe has been set to run in compatability mode for an older version of windows. For best results turn off compatability mode for itunes before you open it".
    When i right click the itunes link and check compatability mode nothing is checked except run as admin.
    Now with itunes the latest itunes i can not even select an app to remove or move.
    Can someone please help me?

    Fixed my problem myself.
    I was installing itunes to my d drive so i uninstalled it and installed it to the c drive with my operating system.
    All is perfect again.
    Cheers

  • HT1218 iPhone 4s connectivity issues with Time Capsule 4th generation

    Out of nowhere, my iPhone 4s all of a sudden quit connecting to my Time Capsule's wifi. Have never had any problems until yesterday. Have read multiple forums that say reset your iphone, turn wifi off and then on, forget and then resgn into network, change the channels on wifi from automatic to different channels. Changing the channels worked for about an hour and then I was back to square one. Everything else failed. iMac and MacBook connect without any problems or delays at all. PLEASE HELP?!?!

    Your TC replaced what?
    Are you extending on 2.4ghz?
    There is a chance the TC is lower than the router it replaced.. you may need to get the second Express closer to get a good signal so it can extend properly.. the idea is to have the express in about the centre of signal strength not distance.. use your laptop if you have one with a wireless analysis program like istumbler to find the signal at the TC from say 3M.. at the express 1 and at the express 2. Work out if the signal is too low and move them as appropiate.
    Or.. think the arrangement and use something like EOP adapters direct to your office.. they can work hugely better than wireless. (or just as badly.. depending on the house wiring).

  • TS1702 Recently my iPad is having connection issues with iTunes and the app store. I always get the message, "Can't connect to iTunes"...can anyone suggest a solution?

    I have tried everything. Wifi is working, I can use safari with no problems, I've tried restarting iPad, I've tried signing out then back into iTunes...and a reboot of my iPad. Nothing works!!!!  Oh and I checked for updates and everything is up to date.
    What is anyone's suggestion??? Need help please!!!

    See:
    IOS 6 App store crash: Apple Support Communities
    Try:
    - Reset the iPod. Nothing will be lost
    Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Reset all settings
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup
    - Restore to factory settings/new iPod.
    - Last, make an appointment at the Genius Bar of an Apple store.
    Apple Retail Store - Genius Bar

  • Has anyone had a issue with itunes and windows 8.1?

    I upgraded to Window 8.1 and now when I plug in my ipod nano gen 4 I get a message that says "ipod detected but it could not be identified". It also does not recognize my iphone 4. Microsoft says it is an itunes driver issue that is not compatible with the 8.1. Has anyone experience this?
    thanks.

    https://social.msdn.microsoft.com/Forums/ie/en-US/home?category=iedevelopment

  • Why does my iPhone5s not show up when I connect it with iTunes on Window 8?

    I am trying to sync my iPhone5s with my iTunes on my windows 8 laptop and it does not recognize it.
    It does recognise it on a windows 7 laptop?
    where can I find the right insturctions on how to sync it?

    both my ipod touch 4th gen and my iPad Air is not detected., i have tried checking the USB cables,. and the Apple Mobile Device (Stop/Start Service from Computer MAnagement) in Windows 8.1 iTunes 11.1.5 is not detecting the devices,., i have check already for all updates,. nothing happens.,., but WIndows does detect the devices only itunes does not

  • Burning issues with itunes and Windows Vista Ultimate

    I recently purchased a new computer with Windows Vista Ultimate 64 bit version. Since loading itunes on my new computer I can not burn a CD. The message that I receive says that there is no burner available. I know the burner works because I have burned music out of different software programs. I have loaded and reloaded Nero 7 but I am finding that is not the problem. Itunes does not recognize any type of CD burner on my computer. Any thoughts?
    Thanks

    paul's onto it.
    if you run your DVD/CD diagnostics (in itunes "help > DVD/CD diagnostics", select DVD/CD diagnostics) and you see a 2380 error showing up down near the bottom of the diagnostics (you may need to scroll down a bit), try reinstalling the 64-bit version of the GEAR drivers iTunes uses for importing and burning.
    here's a link through to the GEAR drivers. note that there are two different versions of the 64-bit drivers. be sure to get the one that matches your hardware:
    GEAR drivers

  • My iphone won't sync with itunes and my itunes store isnt working

    my iphone and ipod will not sync with itunes, I have un-installed itunes, quicktime, and bonjour. i also updated windows. still will not work

    See the further information section in Troubleshooting issues with iTunes for Windows updates.
    tt2

  • Ipod touch 5th gen won't connect/open with itunes

    I just got my ipod touch less than a month ago and it was charging perfectly well until today. At first it didn't want to charge, but I went to device manager and updated the usb cable for the ipod (it says Apple ipod). Now the ipod charges but it doesn't open with itunes instead it opens to a totally different file on my computer. When I go to itunes, I get no response from it.

    See
    iOS: Device not recognized in iTunes for Windows
    - I would start with
    Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
    or              
    Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
    However, after your remove the Apple software components also remove the iCloud Control Panel via Windows Programs and Features app in the Window Control Panel. Then reinstall all the Apple software components
    - Then do the other actions of:
    iOS: Device not recognized in iTunes for Windows
    paying special attention to item #5
    - New cable and different USB port
    - Run this and see if the results help with determine the cause
    iTunes for Windows: Device Sync Tests
    Also see:
    iPod not recognised by windows iTunes
    Troubleshooting issues with iTunes for Windows updates
    - Try on another computer to help determine if computer or iPod problem

  • TS5376 Issues with itunes when reinstalling?

    After I got the error messages I removed all apple software from Programs and now when I reinstall following the instructions I can not find the saved setup file?  What do I try now?

    See the further information section of Troubleshooting issues with iTunes for Windows updates for direct download links.
    tt2

Maybe you are looking for

  • How can I erase (or remove) the hard drive from a dead Time Capsule?

    How can I erase (or remove) the hard drive from a dead Time Capsule?

  • IMac G4 Flat Panel as Apple TV?

    I have a five year old iMac Flat Panel (this one; the 125 GHz model) that I've recently retired and replaced, due to a dead monitor. Since an iMac with a dead monitor is more or less worthless on eBay, I've been trying to come up with an alternate us

  • Get the data type

    Hi All,           I have one requirement like i have statement : "data: text type c  length 1" i need to get only data type "C" into one variable.I used split it will not work for my requirement .Can anybody please suggest  any other abap syntax to g

  • How to set NC Log API

    Hi all, I want to use the following NC log API,but I don't know how to initialize the interface's java object and set the parameter "ApplicationVO". Interface LogNCApplicationInterface Method ApplicationVO addNDone(ApplicationVO applicationvo) Please

  • Export settings for FCP project

    Shot on 7D - will be played from external to screen. What would the best export be? Thanks.