How to troubleshoot Miracast pairing/connecting?
Using Windows 8.1. I'm having trouble getting Miracast to pair properly with a TV. Using certain modes on the TV, sometimes I manage to add it as a device, for a few seconds anyway, but establishing an actual connection in the Project menu never works.
Is there a way to enable logging to see what's going on in the pairing/adding process, and when trying to connect for projection?
Hi,
How did you operate? Have you add it successfully?
If yes, remove it completely, and then follow this guide to get it:
Windows 8.1 on your big screen with Miracast
http://blogs.windows.com/bloggingwindows/2013/11/12/windows-8-1-on-your-big-screen-with-miracast/
Note: Wireless display is available on most new Windows 8.1 PCs, but some PC manufacturers might choose not to include it on some new and upgraded PCs. Specifically, your PC needs WDDM 1.3 display and NDIS 6.4 Wi-Fi drivers, enabled by the IHV and OEM for
Miracast. If you don’t see “Add a wireless display” when you tap the
Devices charm and tap Project, try going to Windows Update and downloading all available updates (including optional drivers). If you still don’t see it, check for additional updates on your PC manufacturer’s support site,
or contact them to ask how you can get this feature on your PC.
Karen Hu
TechNet Community Support
Similar Messages
-
How to troubleshoot iphone 5s connectivity issue with iTunes on Windows 7
When I connect my new iPhone 5s to my Windows 7 home edition PC with the latest version of iTunes, the PC recognizes it. From My Computer I can see a new item "iPhone", which can be opened to show internal storage (photos). However iTunes never sees my phone. If I run diagnostics from iTunes it reports that no devices are found. In the meanwhile, my iPad can connect and get recognized by iTunes without any problem.
What is missing?
Thanks.Okay I found the solution - I'm still surprised this actually worked - which is to connect the phone through a powered USB hub. That's it! iTunes finally wakes up and syncs my phone!
I hope this helps those who might stumble over the same issue.
Cheers. -
We have gateway.domain.org as our external/internal gateway server.
It goes from gateway.domain.org to rdbroker.domain.local, rdbroker is the DNS address for two connection broker servers.
After this it should set up the connection and create a remote desktop to one of the RDS host servers in the RDS host farm.
Sometimes this works, sometimes it doesn't -- for different user accounts and different computers.
How to troubleshoot this??
We know the firewall rules for DMZ etc. etc. are properly configured because everything IS observed to work, just not all the time consistently. We get errors about cannot contact the computer, cannot establish remote desktop connection...
Thank you, TomHi Tom,
Firstly, you need to recheck the DNS entry is well setup for your case. Are you using DNS RR for Load balancing the server or 3rd party load balancer? Have you setup the proper certificate for your case?
Please check whether required ports is opened? We need to open TCP port 443 and UDP port 3391 and forward them to your RD Gateway server. Also need to specify the external FQDN of your RD Gateway server in deployment properties under RDS server manager. If
you have RDWeb and RDG on the same server this would be the same FQDN that your users will use for RDWeb. Please see whether you have properly configured RD RAP and RD CAP policy.
You can go through beneath article for more details.
Step by Step Windows 2012 R2 Remote Desktop Services – Part 3
https://msfreaks.wordpress.com/2013/12/26/windows-2012-r2-remote-desktop-services-part-3/
Hope it helps!
Thanks.
Dharmesh Solanki
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected] -
my mac will not send or receive email's... its not internet connection... my iPhone still receives emails... so I'm not sure how to troubleshoot this problem, any ideas?
What does the Mail Connection Doctor return?
The link in my first replay included :
If you still can’t send or receive email
Mail Connection Doctor may be able to tell you more about the issue. -
I have a 3th Gen Apple TV and a late 2012 mac mini with IOS 10.8.3
- Connected thru HDMI to an ASUS monitor
- Apple tv connected with wire
- Mac Mini connected wireless.
- I can see the Airplay icon on the screen
- I can select my apple TV on the icon pull-down menu (first time it asked me for apple TV password)
- Once selected, my monitor resolution changes and apple TV goes to a blank screen. On the pull-down menu, my apple TV papears selected and the option "match desktop size to:" is selected for my Apple TV.
Any ideas on how to troubleshoot?
Additional Info:
- I can stream from iTunes music with no problem
- From an Air (on same wireless network) I can mirror my display. And form iPad and iPhone I can stream video and music.Welcome to the Apple Community.
Try the following steps, check whether things are working after each step where appropriate, before trying the next.
Check AirPlay is turned on on the Apple TV (turn it off and on if it already is)
Check that both devices are on the same network (Settings > Wifi, on the mobile device and Settings > General > Network, on the Apple TV).
Restart the Apple TV (Settings > General > Restart).
Restart the Apple TV by removing ALL the cables for 30 seconds.
Restart your router. (Also try removing it’s power cord for at least 30 seconds)
Restart your mobile device.
If you are still having problems, the following article(s) may help you.
Troubleshooting AirPlay
Troubleshooting Wi-Fi networks and connections
Recommended Wi-Fi settings
Wifi Diagnostic Software (for Mac users)
You may also find some help on this page, where I’ve collected some of the more unusual solutions to network issues.
When making adjustments to your network for better optimisation, you may find some of the points mentioned on this page helpful. -
Help to troubleshoot a 3G connection.
Hello!
I need help to troubleshoot a 3G connection.
It's a CISCO2921/K9 with UC license and a 3G Interface.
I used the manual to make the configuration, step by step, I can send and receive SMS by 3G network, and connect, take a IP, DNS etc, but I don't able to ping or send and receive data with the 3G connection.
See the information:
show ip int br
Interface IP-Address OK? Method Status Protocol
Embedded-Service-Engine0/0 unassigned YES NVRAM administratively down down
GigabitEthernet0/0 192.168.50.1 YES NVRAM up up
GigabitEthernet0/1 192.168.6.253 YES DHCP up up
GigabitEthernet0/2 unassigned YES NVRAM administratively down down
Cellular0/0/0 unassigned YES NVRAM up up
Cellular0/0/1 unassigned YES unset down down
Dialer1 191.27.49.172 YES IPCP up up
NVI0 192.168.50.1 YES unset up up
I have a radio ISP connected on interface G0/1 and my internal network is connected in G0/0 on a Layer 3 Switch.
3G configuration:
chat-script hspa-R7 "" "AT!SCACT=1,1" TIMEOUT 60 "OK"
cellular 0/0/0 gsm profile create 1 zap.vivo.com.br PAP vivo vivo
interface Cellular0/0/0
ip address negotiated
ip nat outside
ip virtual-reassembly in
encapsulation slip
dialer persitent
dialer pool-member 1
async mode interactive
interface Dialer1
ip address negotiated
ip nat outside
ip virtual-reassembly in
encapsulation slip
dialer pool 1
dialer idle-timeout 0
dialer string hspa-R7
dialer persistent
dialer-group 99
ip nat inside source list 1 interface GigabitEthernet0/1 overload
ip nat inside source list 89 interface Cellular0/0/0 overload
ip nat inside source list 90 interface Dialer1 overload
access-list 1 permit any
access-list 89 permit any
access-list 90 permit any
ip route 0.0.0.0 0.0.0.0 Dialer1
ip route 0.0.0.0 0.0.0.0 192.168.6.1
access-list 1 permit any
access-list 89 permit any
access-list 90 permit any
line 0/0/0
exec-timeout 0 0
script dialer hspa-R7
modem InOut
no exec
transport input all
Dialer1 is up, line protocol is up (spoofing)
Hardware is Unknown
Internet address is 191.27.49.172/32
MTU 1500 bytes, BW 56 Kbit/sec, DLY 20000 usec,
reliability 255/255, txload 1/255, rxload 1/255
Encapsulation SLIP, loopback not set
Keepalive set (10 sec)
DTR is pulsed for 1 seconds on reset
Interface is bound to Ce0/0/0
Last input never, output never, output hang never
Last clearing of "show interface" counters 00:15:57
Input queue: 0/75/0/0 (size/max/drops/flushes); Total output drops: 0
Queueing strategy: fifo
Output queue: 0/40 (size/max)
5 minute input rate 0 bits/sec, 0 packets/sec
5 minute output rate 0 bits/sec, 0 packets/sec
0 packets input, 0 bytes
508 packets output, 41923 bytes
Bound to:
Cellular0/0/0 is up, line protocol is up
Hardware is QuadBand HSPA+R7/HSPA/UMTS QuadBand EDGE/GPRS and GPS for AT&T
Description: PrimaryWANDesc_
Internet address will be assigned dynamically by the network
MTU 1500 bytes, BW 5760 Kbit/sec, DLY 20000 usec,
reliability 255/255, txload 1/255, rxload 1/255
Encapsulation SLIP, loopback not set
Keepalive not supported
Interface is bound to Di1 (Encapsulation SLIP)
Last input never, output never, output hang never
Last clearing of "show interface" counters never
Input queue: 0/75/0/0 (size/max/drops/flushes); Total output drops: 0
Queueing strategy: fifo
Output queue: 0/10 (size/max)
5 minute input rate 0 bits/sec, 0 packets/sec
5 minute output rate 0 bits/sec, 0 packets/sec
0 packets input, 0 bytes, 0 no buffer
Received 0 broadcasts (0 IP multicasts)
0 runts, 0 giants, 0 throttles
0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored, 0 abort
508 packets output, 41923 bytes, 0 underruns
0 output errors, 0 collisions, 0 interface resets
0 unknown protocol drops
0 output buffer failures, 0 output buffers swapped out
0 carrier transitions
DCD=up DSR=up DTR=up RTS=up CTS=up
Profile Information
====================
Profile password Encryption level: 7
Profile 1 = ACTIVE* **
PDP Type = IPv4
PDP address = 191.27.49.172
Access Point Name (APN) = zap.vivo.com.br
Authentication = PAP
Username: vivo
Password: 0870191E5D495746335B2E
Primary DNS address = 187.100.246.254
Secondary DNS address = 187.100.246.251
Profile 2 = INACTIVE
PDP Type = IPv4
Access Point Name (APN) = wap.cingular
Authentication = None
Username:
Password: 03
* - Default profile
Data Connection Information
===========================
Data Transmitted = 41923 bytes, Received = 0 bytes
Profile 1, Packet Session Status = ACTIVE
IP address = 191.27.49.172
Primary DNS address = 187.100.246.254
Secondary DNS address = 187.100.246.251
Negotiated QOS Parameters:
Precedence = Normal Priority, Delay = Class 2
Reliability = Unack GTP, LLC, Ack RLC, Protected data
Peak = 256 kB/sec, Mean = 50000 kB/hr
Traffic Class = Interactive
Uplink Max = 11.5Mbps, Guaranteed = Subscribed
Downlink Max = 42Mbps, Guaranteed = Subscribed
Max SDU size = 1500 bytes
SDU error ratio = 1E-4, BER = 1E-5
Profile 2, Packet Session Status = INACTIVE
Inactivity Reason = Normal inactivate state
Profile 3, Packet Session Status = INACTIVE
Inactivity Reason = Normal inactivate state
Profile 4, Packet Session Status = INACTIVE
Inactivity Reason = Normal inactivate state
Profile 5, Packet Session Status = INACTIVE
Inactivity Reason = Normal inactivate state
Profile 6, Packet Session Status = INACTIVE
Inactivity Reason = Normal inactivate state
Profile 7, Packet Session Status = INACTIVE
Inactivity Reason = Normal inactivate state
Profile 8, Packet Session Status = INACTIVE
Inactivity Reason = Normal inactivate state
Profile 9, Packet Session Status = INACTIVE
Inactivity Reason = Normal inactivate state
Profile 10, Packet Session Status = INACTIVE
Inactivity Reason = Normal inactivate state
Profile 11, Packet Session Status = INACTIVE
Inactivity Reason = Normal inactivate state
Profile 12, Packet Session Status = INACTIVE
Inactivity Reason = Normal inactivate state
Profile 13, Packet Session Status = INACTIVE
Inactivity Reason = Normal inactivate state
Profile 14, Packet Session Status = INACTIVE
Inactivity Reason = Normal inactivate state
Profile 15, Packet Session Status = INACTIVE
Inactivity Reason = Normal inactivate state
Profile 16, Packet Session Status = INACTIVE
Inactivity Reason = Normal inactivate state
Network Information
===================
Current Service Status = Normal, Service Error = None
Current Service = Combined
Packet Service = HSPA+ (Attached)
Packet Session Status = Active
Current Roaming Status = Home
Network Selection Mode = Automatic
Country = BRA, Network = VIVO
Mobile Country Code (MCC) = 724
Mobile Network Code (MNC) = 23
Location Area Code (LAC) = 27135
Routing Area Code (RAC) = 4
Cell ID = 57743
Primary Scrambling Code = 115
PLMN Selection = Automatic
Registered PLMN = , Abbreviated =
Service Provider = VIVO
Radio Information
=================
Radio power mode = ON
Current Band = WCDMA 850, Channel Number = 4385
Current RSSI = -60 dBm
Band Selected = Auto
Number of nearby cells = 1
Cell 1
Primary Scrambling Code = 0x73
RSCP = -63 dBm, ECIO = -7 dBm
Modem Security Information
==========================
Card Holder Verification (CHV1) = Disabled
SIM Status = OK
SIM User Operation Required = None
Number of CHV1 Retries remaining = 3
Incoming Message Information
SMS stored in modem = 1
SMS archived since booting up = 0
Total SMS deleted since booting up = 0
Storage records allocated = 30
Storage records used = 1
Number of callbacks triggered by SMS = 0
Number of successful archive since booting up = 0
Number of failed archive since booting up = 0Refer this URL for how to configure the modem through serial port
http://docs.sun.com:80/ab2/coll.47.11/SYSADV2/@Ab2PageView/17395?DwebQuery=modem+configuration&Ab2Lang=C&Ab2Enc=iso-8859-1
Thanks,
Senthilkumar
Developer Technical Support
Sun Microsystems, Inc.
http://www.sun.com/developers/support -
How does a BlackBerry handheld connect to BES for the first time?
How does a Blackberry device connect to BlackBerry Enterprise Server (BES) for the first time? Is there a risk that a rogue BlackBerry handheld connects to BES?
Thank you in advance!Hi and Welcome to the Forums!
When a BES admin sets up a BB on BES, they configure the unique BB PIN into their BES and also create credentials that are required to actually complete the registration process on the BB. So, while there is no perfect security anywhere, I don't think the risk you are concerned about is high enough to warrant any attention.
Good luck!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code -
Hi. My wifi keeps disconnecting. I keep turning the wifi on and off in settings but will disconnect again after a minute or so. I use an ipad2 and my ios is updated. How to troubleshoot? - kay peralta
Is this happening with one particular network or with all? Make sure iOS is updated on the device.
Try this:
Reboot ipad by pressing and holding both the home and sleep/wake buttons at the same time until the apple logo appears on the screen, then let go. Then try to connect to network.
Go to settings, Toggle airplane mode on/off. Make sure bluetooth is off. Turn on wif (airplane mode off). Try to connect.
Reset Network Settings
Go to settings/general/reset/reset network settings. Then try to connect to network.
If its your home router, then reboot router by unplugging for 5-10min. (do this while you're resetting network settings).
If problem persists, then check for firmware updates on your router.(you check router manufacturer support website for downloads and instructions). -
How to troubleshoot them and eliminate the frostycup=1 and STATUS_CODE_ERROR.
Hey Lee,
To make sure we are on the same page you are trying to access and download content the Mac App Store. From the time of your post, I do know that the multiple online stores were having issues with accessing content. Any time you have issues with connecting to any store, take a look at the link below to check the status of all of Apple’s services. If you cannot access that content now let me know.
Apple Services, Stores, and iCloud
https://www.apple.com/support/systemstatus/
Take care,
-Norm G. -
I am unintentionally come to delete the bluetooth connection to my heart rate monitor in my iPhone 4s. How can I restore the connection?
Thanks, but unfortunately for me the Polar H7 does not have any buttons or anything that can actively affect the pairing, it is manifest just a transmitter. Pairing can apparently only be done by finding the Polar H7 in the unit that you want to pair with (my 4s) and after my delete of the device, my iPhone 4s does not retrieve it as a Bluetooth device.
-
How to solve unable to connect ipad issue
Has anyone been able to solve the unable to connect to network issue?
Some things to try first:
1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
4. Go into your router security settings and change from WEP to WPA with AES.
5. Renew IP Address: (especially if you are droping internet connection)
• Launch Settings app
• Tap on Wi-Fi
• Tap on the blue arrow of the Wi-Fi network that you connect to from the list
• In the window that opens, tap on the Renew Lease button
~~~~~~~~~~~~~~~~~~~~~~~~~
iOS 6 Wifi Problems/Fixes
How To: Workaround iPad Wi-Fi Issues
http://www.theipadfan.com/workaround-ipad-wifi-issues/
Another Fix For iOS 6 WiFi Problems
http://tabletcrunch.com/2012/10/27/fix-ios-6-wifi-problems-ssid/
Wifi Doesn't Connect After Waking From Sleep - Sometimes increasing screen brightness prevents the failure to reconnect after waking from sleep. According to Apple, “If brightness is at lowest level, increase it by moving the slider to the right and set auto brightness to off.”
Fix For iOS 6 WiFi Problems?
http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
iOS 6 iPad 3 wi-fi "connection fix" for netgear router
http://www.youtube.com/watch?v=XsWS4ha-dn0
Apple's iOS 6 Wi-Fi problems
http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
~~~~~~~~~~~~~~~~~~~~~~~
How to Fix a Poor Wi-Fi Signal on Your iPad
http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Fix-A-Poor-Wi-Fi-Signal-O n-Your-iPad.htm
iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
How to Fix: My iPad Won't Connect to WiFi
http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Connect iPad to Wi-Fi (with troubleshooting info)
http://thehowto.wikidot.com/wifi-connect-ipad
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
Cheers, Tom -
How can I prevent "the connection has timed out" message.
Sorry, this is a duplicate. Can't determine how to delete. Mike.
Frequently takes a full minute to get to first page. Happens on IE as well as FF, also on my email client. After an hour or so, Thunderbird can no longer reach my email,with an error. To recover I have to reboot.
Occasionally "try again" button works on the "connection has timed out" message
Some tools which access the web take a long time to “update”,
is hard to recreate have not proven or disproven the firewall is a problem. Don't think WinXP firewall is on.
Tried refresh of Adobe Flash Player per suggestion in Firefox Support forum, no help.Hello there, FloridaAce.
The following Knowledge Base article offers up some practical first steps for troubleshooting Wi-Fi connectivity issues with an iOS device:
iOS: Troubleshooting Wi-Fi networks and connections
If going through the initial recommended steps doesn't yield a resolution to your issue, you may want to run through this section as well:
Wi-Fi disconnects or signal strength is less than expected
Move closer to the Wi-Fi router (access point).
Check for sources of potential interference.
Remove any case, stand, or other accessories from your iOS device and see if signal strength improves.
Reset network settings by tapping Settings > General > Reset > Reset Network Settings. Note: This will reset all network settings including
previously connected Wi-Fi networks and passwords
recently used Bluetooth accessories
VPN and APN settings
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro. -
How to correct close database connection after report generation
Hello
I have problem a with alive database connection after report creation and report closing. How to properly to close connection to database?
Best regards
Edited by: punkers84 on Jun 17, 2011 10:38 AMthat's what I am doing... after viewing the report, I call the close method on the window closing event of the container window. but the connection is still open. I had a lot of other issues with my jdbc driver but after downgrading to an older version those issues are resolved.Only this one is still there! Is there any other way to close the connection (like using dbcontroller or etc.)?
-
How to do a Generic Connectivity (ODBC) ?
Hello,
Generic Connectivity provide Oracle Database to connect another
database via ODBC. In my case, it is Oracle 8.1.6 which connects
to Sybase Enterprise 11 on Win NT. The Module "Generic
Connection" is installed. I view it by the Oracle Universal
Installer and I have configured the Windows ODBC Manager to
connect to Sybase.
This is what I've done step by step:
1. C:\Oracle\Ora81\hs\Admin\iniths_syb.ora
HS_FDS_CONNECT_INFO = SPS_NACIONAL
HS_FDS_TRACE_LEVEL = ON
HS_FDS_TRACE_FILE_NAME = hs_syb.log
2. C:\Oracle\Ora81\Network\Admin\Listener.ora
LISTENER =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = nacional)(PORT = 1521))
SID_LIST_LISTENER =
(SID_LIST =
(SID_DESC =
(GLOBAL_DBNAME = oracle)
(ORACLE_HOME = c:\Oracle\Ora81)
(SID_NAME = oracle)
(SID_DESC =
(SID_NAME = hs_syb)
(ORACLE_HOME = c:\Oracle\Ora81)
(PROGRAM = hs_syb)
I reload the listener by the following command :
lsnrctl
stop
start
3. C:\Oracle\Ora81\Network\Admin\Tnsname.ora
ORACLE =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = host)(PORT = 1521))
(CONNECT_DATA =
(SERVICE_NAME = oracle)
hs_syb =
(DESCRIPTION=
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = host)(PORT = 1521))
(CONNECT_DATA =
(SID=hs_syb)
(HS = OK)
I test the tnsname at the prompt command line :
tnsping hs_syb
(It's OK)
4. Database Link
CREATE PUBLIC DATABASE LINK syb
USING 'hs_syb';
5. Test database link
select * from emp@syb;
And Errors occur :
ORA-28509: unable to establish a connection to non-Oracle system
ORA-02063: preceding line from SYB
6. I read again the documentation
http://technet.oracle.com/doc/oracle8i_816/server.816/a76960/hs_g
enco.htm
and I found some tables to be feed with data by the HS_ADMIN
packtage :
This is what I have added :
EXEC DBMS_HS.CREATE_FDS_CLASS ('hs_syb','Uses ODBC Driver')
EXEC DBMS_HS.CREATE_FDS_INST ('hs_syb','hs_syb','SYC Sybase
System 10/11')
EXEC DBMS_HS.CREATE_INST_INIT
('hs_syb','hs_syb','HS_DB_NAME','SYBDATA','F')
(Drop procedure :
EXEC DBMS_HS.DROP_INST_INIT
('hs_syb','hs_syb','HS_FDS_CONNECT_INFO')
EXEC DBMS_HS.DROP_FDS_INST ('hs_syb','hs_syb')
EXEC DBMS_HS.DROP_FDS_CLASS ('hs_syb');
I test one more time the connection,
And I have the same error message as step 5.
7. I put in the initialization file (initoracle.ora) the
parameter
Hs_Autoregister = true (It is true by default and it doesn't
change errors. Is it another parameters for HS ?)
In fact, I don't really understand the notion of "AGENT" for HS
(Heterogeneous Services) in Oracle. Is it something to enable or
is it automatic because the iniths_syb.ora file is in the path
ORACLE_HOME\hs\admin ???
What is it missing for the Generic Connectivity ? Any
suggestion ? Say me what is the wrong step in this process or
what I have forgotten.
Thank you in advance.
Jobar TeamHello
You're right, step two needs to set (PROGRAM = hsodbc). I understand this when I saw hsodbc.exe in the path ORACLE_HOME\Bin (and at prompt I try agtctl.exe but without sucess, an utility for Heterogeneous Services).
Now when I test the connection I can hear Oracle running something.
This is what I've done step by step (following my previous message)I test with Sybase Entreprise and Sybase Anywhere :
8. C:\Oracle\Ora81\Database\initoracle.ora
I set a parameter in init file and I reload Oracle database :
global_names = false
OR in SQL+
alter session set global_names=false;
WITH SYBASE ENTREPRISE
9. C:\Oracle\Ora81\hs\Admin\iniths_syb.ora
At the beginning my iniths_syb.ora file was wrong then I correct parameters by viewing errors in C:\Oracle\Ora81\hs\trace :
#Using a dsn file generate by the Windows ODBC Manager
HS_FDS_CONNECT_INFO="FILEDSN=C:\sybase.dsn"
HS_FDS_TRACE_LEVEL = ON
HS_FDS_TRACE_FILE_NAME = C:\hs_syb.log
set SYBASE=C:\\Sybase\\ASE
Contents of sybase.dsn
[ODBC]
DRIVER=Sybase System 11
UID=USERNAME
SRVR=SVRNAME
DB=master
10. Test Database link
CREATE PUBLIC DATABASE LINK syb
CONNECT TO USERNAME IDENTIFIED BY SECRET
USING 'hs_syb';
select * from anytable@syb;
ORA-00942: table or view does not exist
[Transparent gateway for ODBC]393330(0,0,1[[]])
ORA-02063: preceding 2 lines from SYB
I try to set parameters in iniths_syb.ora without success :
HS_DB_DOMAIN=SVRNAME
HS_DB_NAME=master
HS_FDS_DEFAULT_OWNER=USERNAME
WITH SYBASE ANYWHERE
11. C:\Oracle\Ora81\hs\Admin\iniths_any.ora
#Using a dsn file generate by the Windows ODBC Manager
HS_FDS_CONNECT_INFO="FILEDSN=C:\anywhere.dsn"
HS_FDS_TRACE_LEVEL = ON
HS_FDS_TRACE_FILE_NAME = C:\hs_any.log
Contents of anywhere.dsn
[ODBC]
DRIVER=Adaptive Server Anywhere 6.0
UID=USERNAME
Integrated=No
AutoStop=Yes
EngineName=SERVICE
12. Test Database link
CREATE PUBLIC DATABASE LINK anywhere
CONNECT TO USERNAME IDENTIFIED BY SECRET
USING 'hs_any';
select * from anytable@anywhere;
In SYBASE ANYWHERE I've got this data
select * from anytable
go
dateini col1 col2
2002-02-01 00:00:00.0000 1.5000 1.4000
In ORACLE I've got
SQL> select * from anytable@anywhere;
dateini col1 col2
01/02/02 1 1
There isn't the decimal.
The reason doesn't like to be 1.4 or 1,4 because in Anywhere and in Oracle It is the same insert "insert into anytable values ('02/02/01', 1.5, 1.4)".
13. Now I try a select of one column
select col1 from anytable@anywhere;
this error occur :
ORA-00904 invalid column name
I am sure that this column exist ! "select * from anytable@anywhere;" and "select count(*) from anytable@anywhere;" are OK.
14. And this doesn't work anymore :
insert into bx_surcharge@anywhere values ('01/02/02',1,2);
ORA-02047: cannot join the distributed transaction in progress
15. Step 6 and 7 doesn't mean to be necessary ? And Where are used parameters of the "ODBC Connectivity Requirements" in the documentation. http://technet.oracle.com/doc/oracle8i_816/server.816/a76960/hs_genco.htm (And How to use Datatype Mapping ?)
So How to successful a ODBC connection (Maybe I forget some parameters) ? For me, using a connection with ODBC is generic and have to work fine with any type of datasource, isn't it ?
Have you got any idea to deal ? Thanks a lot.
Jobar Team -
How to create a new connection from SAPGUI to Test drive?
Hi,
I have installed Sap Netweaver Test drive on a linux virtual machine (windows host). The installation was successful and I was able to start the instance (application server and the database), yet I don't know how to create a new connection from my SAPGUI client (7.20) to this server. The static IP address of the server is 192.168.1.160.
I entered the following values for my new connection entry
Description: SAP Netweaver
Application server: 192.168.1.160
Instance number: 01
System ID: DB2
SAProuter: /H/192.168.1.160/S/3201/H/
But it does not work. Any idea about the values needed for creating a new entry?
Thanks in advance,
Dariyoosh>
Dibya R Das wrote:
> Why are you entering a router string? Can't you reach a box directly from your machine?
>
> Doesn't a ping to that host & a "telnet <host/ip address> 3201" work from your machine to the SAP System.
>
> Remove the router string you wont need if the above works.
>
> - Regards, Dibya
Hello there,
Thank you very much for your answer which solved my problem. In fact there was no need of providing router string.
Kind Regards,
Dariyoosh
Maybe you are looking for
-
Using ODBC without the 8i or 9i Client
Connecting Access.mdb on a windows station to Oracle 8i or 9i using ODBC Can an oracle ODBC driver be installed programatically on a station without installing the complete 8i or 9i client? The Microsoft ODBC driver for Oracle produces a message stat
-
Read Infotype 0167 and writes WT in Internal Table
Hi gurus, I need to read the healt plans in IT0167 in the payroll. I am using the P0167 PAR1-BEG function, and it reads the table, but, do not write any wage type in IT table. Do you know what I am missing?
-
I ran a scan on my computer and it found 1,288 errors how can I get rid of them?
I did a scan test on my desktop and found that I have run sections(10 errors), user software settings(195 errors), system software settings(867 errors), ActiveX and com sections(78 errors), file associations(92 errors), uninstall sections(known as ad
-
HTML_DB Version : 1.6 In Reports, the width is being set to the max width of the data. How can I change the width of fields in Reports ? abhay
-
Does anyone know how interactive maps are produced in Flash? I have three GIS layers in the form of shapefiles. Two of the layers are lines while the other is a polygon. I would like to add the data in a way that allows for the polygon to overlay on