How to turn a doc designed for spread  into a page ordered pdf?

I am a relative InDesign newbie, so please excuse my ignorance. I have document of installation instructions that is printed on a single double-sided piece of paper, which is then folded. So in InDesign, there are two layout spreads. The first one includes actual pages 2,3,4,5,6,7,8, and 9. The second one includes 10,11,12,13,14,15,16, and 1.
After updating this I want to create both a spread version of the pdf for a printer, plus a regular page ordered pdf for web viewing. I am not clear on how to do this.
I am using CS5.
Thank you in advance for your help.

There are two "pages". Not sure how they are referred to in InDesign, but when you look at the InDesign doc, you see two separate "pages", each one divided into 8 sections. There is also a third "page" which includes all the specs for the printer (it is in the spread version of the pdf, but is not printed and not included in the web version of the pdf).

Similar Messages

  • How to turn on the light for when a call comes in ?

    how to turn on the light for when a call comes in?

    Settings>General>Accessibility>Hearing>LED Flash for Alerts>Off.

  • How do I set the wallpaper for the the first page only

    how do I set the wallpaper for the the first page only.I have my ICE #'s as wallpaper but I only want it on the first page

    When you set a wallaper you are asked where you want to set it. Either Lock Screen or Home Screen or Both.
    If you choose Lock screen it will only appear when you wake up your phone.
    If you set it to Home screen, then it wil be set behind the app icons on all your home screens.
    If you choose both, then it will be on both.
    Not sure what you mean by the " have a photo of my ICE in contacts that I am trying to use????" 
    The Photo should be in the Photos App. how is it in contacts?  is it assigned to a contact?

  • In upgrade 11.0-how to turn shuffle on/off for playback.

    Just loaded the upgrade of iTunes 11.0 and learning my way around.  At the top of playlists, I see a two shuffle icons, one near the name of the playlist and the other in the small box above which shows the song playing.  Clicking either one seems to cause a new shuffle.  But I cannot figure out how to turn off shuffle.
    How do we turn off shuffle -- and how to turn it back on again?

    How strange and weird --
         Yes -- the icon in the play window does function as an on/off toggle -- but sometimes does not result in Shuffle Off, even though the light goes out
         But -- the icon below next to the name of the playlist will toggle on ONLY;
         Then -- thanks for calling to my attention the Controls>Shuffle> Turn On/Off -- It does not seem to do anything.  Shuffling can be turned on or off (sometimes) in the top icon regardless of whether how controls icon is set.
    How totally weird and confusing.

  • How to turn on debug mode for NW 7.3 trial version?

    Hello SDN!
    I've got a trial version of NW 73 from here: http://scn.sap.com/community/netweaver/blog/2012/07/12/netweaver-compositon-environment-73-trial-version-available-on-scn and installed it from instruction. Installation was OK and Java instance is up and running now. System asked me to change administrator password after I logon to the NWA for the first time. I've changed password and now I'm able to login to the NWA but system doesn't accept neither new administrator password nor OS users (root and cesadm users) passwords when I try to turn on debug mode for Java instance.
    What I did wrong?
    Regards, Lev

    Hi Benny!
    Thanks for answer.
    The installation finished without any errors. Java instance run successfully. After install I opened browser right in VM window with url http://sapnwce73:50000/nwa to switch on debug mode. Since it was my first logon to the system as "Administrator" user the system asked me to change password. I've changed password and logon to NWA successfully as user with login "Administrator" and his new password. After I switched on debug mode the system asked me to login and password as shown on the follow screenshot:
    This screen didn't accept neither Administrator user credentials, nor cesadm user credentials, nor root user credentials.
    Also I've found that I'm not able to restart/stop Java instance because of the same issue - system doesn't accept user credentials.

  • How to turn off cellular data for exchange mail iphone 4 running on ios 7.1.1

    Hello,
    I am new to using iphone 4. I am able to turn off cellular data for most of my apps. But unable to find an option to turn off celullar data for exchange emails.
    Is this possible? please help.
    For now I am using the fetch method instead of push.

    What's not there on the 4S is the ability to specifically disable 3G data. You can disable all cellular data. Turning off 3G did NOT turn off cellular data. It just shut off 3G. You would still be connected to the EDGE data network if present.

  • How do I flip a design for transfer printing?

    There used to be an easy way under customize print to flip a design for transfer printing....can't find it now.

    There's a free image editor, Xee, that you can use from within iPhoto to mirror flip, rotate, etc. losslessly.
    OT

  • How to turn off core dump for WebLogic 8.1 running on AIX 5.3

    Hi there,
    Is there a way we can turn off core dumping for WebLogic 8.1 running on AIX 5.3?
    Thank you.
    Regards,
    Surender

    Hi Surender,
    Please add the following Flag in the JAVA_OPTIONS of your servers StartScript like following :
    JAVA_OPTIONS=${JAVA_OPTIONS}     -Xdump:system:none
    Thanks
    Jay SenSharma
    http://jaysensharma.wordpress.com/2009/12/30/jvm-crash-and-native-outofmemory/ (WebLogic Wonders Are Here)

  • How to create an rss feed for a database application page

    Hi
    I need to create a web service for an apex application page so that it can be utilized and hosted another server of apex. For that we thought of creating an rss feed for that application page.
    Please help me out how to create an rss feed for an apex page.
    Thanks in advance.
    Regards
    Sandeep Artham

    Hi,
    This might help
    http://download.oracle.com/docs/cd/E23903_01/doc/doc.41/e21674/advnc_web_services.htm#sthref2628
    Also Blog posts
    http://tylermuth.wordpress.com/2008/01/22/producing-rss-from-plsql/
    http://richmurnane.blogspot.com/2010/03/oracle-apex-creating-simple-rss-feed.html
    http://www.apex-blog.nl/node/8
    Regards,
    Jari

  • How to make multi-box fields for name or address in a PDF form to be filled in?

    I would like to know how to make fields for name and address in a PDF form.
    I am now using Acrobat 8 Pro on Windows Vista. I have downloaded a form in the format of a PDF file. Basically it is just a file holding images of pages of the document, and there are no fields for me to type something on it using computer. This form will be used frequently by me, but I don't want to print it out and fill it in every time by hand. I want to fill it in in the computer and print copies of it when needed. The output will then be much more neat and tidy.
    I have seen PDF forms with blanks for typing name and address, which means the form can be filled in on the computer before printing. They are special, as these blanks allow users to type name and address with every character occupying a box in the field, which consists of ten boxes or so. These are not ordinary textfields. I want to make similar inputting field as well.
    Does anyone knows something about making these input fields with each character using 1 little box in the multi-box field? Any ideas are appreciated.

    Does anyone knows something about making these input fields with each
    character using 1 little box in the multi-box field?
    Use text fields with the comb of x characters feature.

  • How to - Extract data from Cloud For Customer into SAP HANA system

    Hello Community,
    I have a requirement for extracting the existing data from Cloud for Customer into separate SAP HANA Box.
    Is it possible to achieve the same ? If yes, Please guide me for the same.
    Awaiting quick response.
    Regards
    Kumar

    Hi Kumar,
    In addition to what Thierry mentioned you could also use the C4C integration via standard Operational Data Provisioning (ODP) interfaces. This integration was acutally built for SAP BW and allows you to access any C4C data sources. From my perspective you can also build upon that for a native SAP HANA integration. Please also have a look at this guide: How To... load SAP Business Suite data into SAP... | SAP HANA.
    Besides that question let me also add the following: SAP Cloud for Customer already runs on SAP HANA since Nov. 2013. You may also use the powerful built-in analytics within C4C for analyzing data and any of your reporting demands. If your report should consider external data as well, you can combined the existing C4C data source with an external, so-called Cloud Data Source. More infomation is published in the C4C Analytics Guide: http://help.sap.com/saphelp_sapcloudforcustomer/en/PDF/EN-3.pdf.
    I hope this helps...
    Best regards,
    Sven

  • How can I change the language for the Quiz Results page?

    How can I change the language for the Quiz Results (labels on buttons and text labels)? Is this possible only manually each time, or are general settings possible?

    For Quiz Slides you've already added to your project file you will need to change the labels manually.  If you change your Quiz Settings and Master Slides that control the defaults and then add new Quiz Slides, THEN those slides will carry your new settings.

  • Finally figured out how to turn my passcode of for my iPhone 5c

    Okay so I have an iPhone 5c and I was having issues with my mom snooping at my text messages (I'm 42 lol) so I set up a passcode on my phone. Well she's now moved out of my home so I wanted to take the passcode off so I went to Settings->Passcode but the "Turn Passcode Off" option was greyed out (not available). I searched all through these discussions and could not find one forum in which someone was able to answer the question, "How do I turn my passcode off on my iPhone 5c if the Turn Passcode Off option is greyed out (unavailable)?" I got very frustrated because every thread I read ppl were suggesting to reset the phone or completely wipe it and install a back up or they suggested that the person asking the question had an exchange email account and therefore the exchange email account would need to be deleted from the phone. Even the final mention of an exchange email account didn't always seem to have a resolution described in complete detail.
    So I wanted to share how I was able to remove my passcode so it would at least be on the forums somewhere for others. So while reading one of the posts about the whole exchange email account, I read a reply that mentioned checking to see if the exchange account setting was still in the profiles and I had my ah ha moment. I went to Settings->General->Profiles and the only thing there was my Lock & wipe profile. I selected remove then went back to Setting->Passcode and sure enough the "Turn Passcode Off" option was available. Now I don't recommend removing the Lock & Wipe feature as it may make your phone more vulnerable to being accessed if it's lost or stolen. So pls keep this in mind as I'm not sure if you can then go back and enable the Lock & Wipe feature without again being requires to set up a passcode. So I'll post an update once I figure that part out.
    I hope this helps some other poor soul out there that is searching to the ends of Google Earth to try and figure this out. If you're trying to turn your passcode off and you have a company exchange email account set up on your phone, you should probably check the profiles installed on your phone as that's likely where the problem with accessing Turn Passcode Off lies. However, you may be in direct violation of your employment agreement or email terms of use if you are able to remove the profile and keep the exchange account on your phone thereby allowing you to access your company email account without having a passcode set up on your phone. Again, I'm not sure if that's possible but just be aware if it is.
    Good luck hope this helps someone else.  

    https://discussions.apple.com/message/21229821#21229821

  • How to turn off auto renew for subscriptions witho...

    Is there a way to turn off auto renewal without canceling the subscription.  The account page shows the payment and the next scheduled payment but no way to turn off the auto renew.

    You can visit the link below for instructions on how to cancel your subscription;
    https://support.skype.com/en/faq/FA1881/how-do-i-cancel-my-subscription
    that action will indeed cancel reoccurring payment, but not your current subscription.  It will be active until the date it is set to expire.
    In in case you may need more specific instructions, encounter any problems, or for further assistance, you can also contact customer service;
    http://community.skype.com/t5/General-Discussion/How-to-Contact-Skype-Customer-Service/m-p/431911
    IF YOU FOUND OUR POST USEFUL THEN PLEASE GIVE "KUDOS". IF IT HELPED TO FIX YOUR ISSUE PLEASE MARK IT AS A "SOLUTION" TO HELP OTHERS. THANKS!
    ALTERNATIVE SKYPE DOWNLOAD LINKS | HOW TO RECORD SKYPE VIDEO CALLS | HOW TO HANDLE SUSPICIOS CALLS AND MESSAGES

  • How to develope  the UI design for a PDA with MI 7.0

    hi all,
    we have downloaded Windows emulator 5.0 and by follwing the link
    https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/5079454e-ca3e-2b10-a199-e3695d0660e5
    so now we can able to fetch the header table data but not the item table data...
    so to fetch the item table data how to develope the UI..
    as we have developed our application in Mobile Infrastructure 7.0 and that is working fine with desktop but not with emulator(windows emulator)
    so can some one inform me how to develope the application which has to work fine even with  an emulator..
    thanks and regards
    manohar

    I'm looking for documentation / How to guides for Always connected applications.
    After installing the emulator how did you proceed to the development of the application?
    any guides greatly appreciated.
    Abhijeet

Maybe you are looking for