How to turn a Macbook Pro into a second display for another Macbook Pro

So my school just gave me a Macbook Pro and I already have a Macbook Pro. I would like to know if I could turn my school Macbook Pro into a second display for my regular Macbook Pro. Thank You!
Both Macs are running Mavericks 10.9.4

If you need administrative access and it is denied to you, then there is no way, as ScreenRecycler and AirDisplay do need administrative access to be installed.

Similar Messages

  • How do I use my IMac as a second moniter for my Macbook Pro?

    Okay, So I would like to use my IMac as a monitor for my mbp. The IMac is a 2010 model and the Macbook is 2012 (Not the retina).
    I'm a music producer and I'm sick of having to switch devices so I just want to keep all my stuff on the macbook but the screens way too small.
    What I want to do is use the mbp screen with the mixer section of logic  as well as use the IMac as a second moniter with the arrange screen.
    Is it possible to do this with an ethernet cable?
    if so
    How do I do it?
    Oh and a question on the side, Is mavericks worth the download?
    Thanks!!

    You can use the iMac as an external display for your MacBook Pro, always that you have got a 27-inch iMac. See > http://support.apple.com/kb/PH11302
    You have to purchase a Mini DisplayPort cable (Ethernet won't work, as this is not designed as a video cable to connect Macs), and then, press Command and F2 keys on the iMac.
    If you have got a 21'5-inch iMac, you can use an application like ScreenRecycler, which uses your network to use the iMac as an external screen

  • Using a macbook pro as a second display for an imac using a thunderbolt to thunderbolt cable

    I know I can use TDM to use an imac as a second display for a MBP with a thunderbolt to thunderbolt cable.  Is there any work around to use a MBP as a second display for an imac with a thunderbolt to thunderbolt cable?
    15" MBP w/retina running maverick 10.9.4
    21" imac running maverick 10.9.4

    No; the MacBook Pro doesn't support video in. If desired, use a product such as ScreenRecycler over a network.
    (112829)

  • Using my iMac as a second display for my Macbook

    Hello. I was just wondering if it is possible to use my G5 (early 2008) iMac as a secondary display for my Macbook (late 2009) using a mini Dvi cable?
    Can anybody help?

    Use ScreenRecycler and a network connection.
    (51586)

  • How can I use my iMac6.1 as a display for my MacBook Pro

    I have a relatively old iMac 6.1 that I would like to use as a diplay for my MacBook Pro:  any idea of how I can do that and what connecting cables I would need?
    Thanks.
    Vittorio

    Unless the MBP has Thunderbolt you can't use the iMac as an external monitor unless you get ScreenRecycler. If the MBP does have Thunderbolt you need a Thunderbolt cable. Because Thunderbolt is so new finding a cable could be quite a challenge, you may want to contact Lacie and see if they can sell you one other than that I have no idea where to find one now. 

  • How can I use my 24inch 2007 iMac as display for my macbook pro?

    My 24 Inch OSX YosemiteiMac has mini display port and my OSX Yosemite Macbook Pro has a thunderbolt port.
    Is this possible?
    Thanks!

    Use a product such as ScreenRecycler over a network.
    (125440)

  • How to use my broken Imac as a second display for my new IMAc

    Hi everyone !
    I have a old Imac Imac 24" Intel Core 2 Duo 2.16GHz 2G
    One day I was watching a video from youtube and It frozen. After that When I start the computer I get the Apple sound and a grey screen.
    I send it to Apple assistence They said it could either be the the main board or the video board.
    As they don't have this parts anymore couse it's a old Imac version, they can do nothing to help or make sure.
    So I have this machine side by side with my new Imac 21.5 inch 2.5ghz Intel core i5
    So is there a way to make it as a second display? Or do anything with it?
    Obs: I used a ethernet cable to erase my Imac 24 and now I getting the grey screen with a file Icon with (?) inside
    Please don't tell me to trow it way.....
    Hope to get some help.
    Fabrício Giugni

    Hi,
    I am getting the this:
    Hardware test does not support this machine.
    When I bought This computer it came with OSx 10.4.7
    Few weeks later Came out OSx Leopart 10.5 And the store gave me a update disk as a gift.
    When Osx snow Leopard came out I bought it.
    So my machine is ruining with Snow Leopard 10.6.8
    When I try to run Hardware test from Snow leopard, nothing happens, also nothing happens to update disk. It only load hardware test from the first Cd that came with the computer. OSx 10.4.7
    So After it load, it asked to choose the language and O got the this:
    Hardware test does not support this machine.

  • Using 2009 iMac as display for 2012 MacBook Pro

    I have a late 2009 27-inch iMac and a Retina, 13-inch, Late 2012 MacBook Pro.  How do I use the iMac screen as a display for the MacBook.

    Hi Jim on Apple,
    Welcome to the Apple Support Communities!
    It sounds like you need to put your iMac in what is called Target Display Mode. The attached article has some great information on Target Display Mode including setting up and other common frequently asked questions.
    Target Display Mode: Frequently Asked Questions (FAQ)
    http://support.apple.com/kb/HT3924
    Have a great day,
    Joe

  • How to download a DVD movie into Premiere Elements 12 using my MacBook Pro so I can edit the video?

    How to download a DVD movie into Premiere Elements 12 using my MacBook Pro so I can edit the video?

    Bob Perez
    Please review and consider the following which works for me in Premiere Elements 12 Window 64 bit.
    From what you wrote, I suspect that you have DVD-VIDEO widescreen on DVD disc. For now I will assume that you are working in a NTSC setup.
    Premiere Elements DVD-VIDEO on DVD disc is characterized as interlaced video with field order lower (bottom) field first. I am not sure how your DVD-VIDEO on DVD was produced - upper (top) field first or lower (bottom) field first. We may have to apply Field Option Reverse Field Dominance at the Timeline level, but for now let us put that aside for a later time.
    Insert your DVD disc in the DVD burner tray.
    Open Premiere Elements to the Expert workspace and set the project preset manually for NTSC DV Widescreen. How to details for manual project preset setting are found
    ATR Premiere Elements Troubleshooting: PE11: Accuracy of Automatic Project Preset (New Project Dialog) Setting
    Then, Add Media/DVD camera or Computer Drive/Video Importer.
    The video files from the DVD-VIDEO will be the larger size files and will probably start with VTS_01_1.VOB.
    In the Video Importer designate the save location for video file VOB(s) and select Add to Timeline and hit Get Media
    to put the files on the Timeline for editing.
    If you have more than one DVD disc to "rip", please set up the Video Importer Save In location so that the save in location has a folder for each disc. The fact that all DVDs have the same VTS_01_1.VOB name etc will cause problems if you saved all to the same place as individual files.
    Determine how that works for you in your Mac computer environment. We will be watching for your progress.
    Others may tell you that you need to convert the VOB to another format before import into Premiere Elements. That is no necessary for Premiere Elements.
    Thank you.
    ATR

  • How do i use my imac 21.5" 2011 as a display for my macbook pro late 2011, through thunderbolt cable ? I have tried and it doesnt seem to work, neither does target disk mode.

    How do i use my imac 21.5" 2011 as a display for my macbook pro late 2011, through thunderbolt cable ? I have tried and it doesnt seem to work, neither does target disk mode.
    Could it be a borked cable ? I just bought it new from the store today, i have updated both imac and macbook pro to latest thunderbolt firmware and updates. Both 10.7.3.
    MacBook Pro:
      Vendor Name:    Apple, Inc.
      Device Name:    MacBook Pro
      UID:    0x0001000A17016E60
      Firmware Version:    22,1
      Port:
      Status:    No devices connected
      Link Status:    7
      Port Micro Firmware Version:    FFFF.FF.FF

    You are correct, here is what Apple Says:
    http://support.apple.com/kb/TS3775
    I was able to find these instructions, however they referr to 2009-2011 27" iMacs. I think it's the same, if it's not then contact Apple directly for instructions. If either of the machines is less than 90 days old or covered by AppleCare then call AppleCare tomorrow for help, they should be able to easily answer this for you. You will find the number in your manual or you can use the AppleCare Contact Info link.
    Your iMac should automatically recognize the presence of a digital video signal at the Mini DisplayPort and enter Target Display Mode.
    If your iMac does not automatically enter Target Display Mode, press command + F2 to manually enter Target Display Mode.

  • How can I use my Iphone as wireless internet receiver for my MacBook Pro?

    Can anyone tell me how to use my Iphone 4 a wireless internet receiver for my macbook pro? Thanks & greeting from the Netherlands! Matthijs

    Apple!!!! Please listen to your customers!!!!
    http://finance.yahoo.com/news/Smartphone-Fans-Want-FM-iw-1184795842.html?x=0&.v= 1
    Give us or make us pay for FM app already!!!!!
    http://www.tomsguide.com/us/Apple-iPhone-iPod-FM-Receiver,news-4855.html

  • How can I turn a smart phone into a dumb phone (for punishment when I still need her to have a phone)?

    I believe I am on the verge of needing to know how to turn my daughters phone into a dumb phone as a consequence.  I still need her to be able to call me, but not much else.  Anyone have any helpful hints?  She has a 5C.

    Remove all the email accounts that are on the device.
    Turn off FaceTime & iMessage.
    Create a new Apple ID using a new email address that you create, and that only you know the password to.
    Use that Apple ID for Settings > iCloud and Settings > iTunes & App Store.
    Delete all the third-party apps on the device.
    Go into Setting > Cellular and disable all apps from using cellular data (except Find My iPhone).  Or even disable Cellular data totally.
    Use the Restrictions option under Settings > General > Restrictions.  Create a Restrictions passcode that only you know
    Disable the ability to use everything from Safari down to Carplay under the Restrictions.
    Set all the allowed content to the most restricted options available.
    Set the Allow Changes in Restrictions to prevent allowing changes to Account, Cellular Data Use, ad maybe even volume limit.
    That pretty much makes it so she can make phone calls and use normal texting, but has no internet access, no way to browse online, no way to use any apps other than what's already pre-installed, can't use FaceTime, can't use the Camera, can't add email accounts to the device, can't change out the iCloud account, etc.  It basically dumbs the iPhone down as far as it can possibly go.

  • I want to know how to turn a word document into a jpeg so I can put the document on Facebook as a picture. I have made posters and if I do a print screen they are unable to be read, or if i turn it into a PDF there is no save as jpeg??

    I want to know how to turn a word document into a jpeg so I can put the document on Facebook as a picture. I have made posters and if I do a print screen they are unable to be read, or if i turn it into a PDF there is no save as jpeg??

    iOS device backups are stored in your iTunes library.
    Move your iTunes library to an external drive.

  • How can i get or download the apple hardware test for a macbook pro made in 2012 running Mavericks 10.9.3

    Does anyone know how can i get or download the apple hardware test for a macbook pro made in 2012 running Mavericks 10.9.3. Thanks.

    Sean and Andy -
    I have to agree with Andy here. I am having the same problem on a mid 2010 MBP (6,2). I have already read the AHT info provided by Sean's link, and they are less than helpful. I'm sure they will be helpful to those who find that they work, but they are confusing if this is not the case. For example, my MBP(6,2) came with ONE (not two) installation disks, so the instructions don't work for me. Another issue is the instructions confound the descriptions related to the MBP, the original (delivered) software (OS X version), and the current installed OS X upgrade software.
    So here's what does NOT work for me... 
         (A) I cannot install 'Disk 2', since I never received this with my original (new) purchase in mid 2010.
         (B) I have checked my firmware versions and they are all up to date, as per Apple's information.
         (C) As suggested in another thread, I looked for /Library/Core Services/.diagnostics and it was NOT present. I followed his instructions, downloaded the correct (I believe) dmg, and installed it. It is in the correct place, and I can see all the invisible files using Pathfinder.
         (D) When I re-start holding down the D key (immediately), it just goes through the normal boot routine; no evidence of AHT.
         (E.1) When I re-start holding down OPT-D, I get a spinning globe, and then it prompts me for a network (wi-fi) connection.
         (E.2) For some unknown reason, the prompt identifies between 2 and 5 of my --neighbors'--  routers, but does not show mine. (??!!)
         (E.3) The routers are listed alphabetically; however, my router SHOULD be at the top of the list by this criterion, but it is nowhere to be seen.
         (E.4) The 'internet recovery' process then allows me to enter a network name AND password. I do this, for my current wi-fi router, and the process rejects it as an incorrect login ID. It is NOT an incorrect login ID! 
    So, now asking Sean and Andy (or anyone else) for further suggestions... ???  As Andy suggested, many people ask questions here because they have -already- worked through the 'official' recommendations, and have found them to be inadequate.
    Any advice would be appreciated!  TIA.
    Ed

  • How do you insert an image into a google map using a macbook?

    I am trying to put images into a Google map using my MacBook, but cannot seem to find any help. How do I insert an image into my Google map using my MacBook?

    Nothing complicated with your menu - very clear "ADD Image" but my menus are not as simple. Everytime I need to add an image I spend 5-10 minutes searching again. Wonder why so hard. I generally find Acrobat menus cryptic and unclear and I am big Adobe fan - use Illustrator, Photoshop, Dreamweaver, Premier, Fireworks etc - but Acrobat menus are like calculus in the dark.

Maybe you are looking for