How to turn "Auto detect hardware changes" on ? Miix 2 8

Hi guys , I always use my Lenovo Miix 2 8 with wired keyboard and mouse , yesterday I was messing around to turn WMI Provider Host off and after a few hours , when I connect my USB devices with it , it AUTO won't detect them anymore. I have to go to Device Manager , I select "Detect for harware changes" and it detects my USB devices.
This is really annoying as everytime I have to manually detect my connected devices. I might have turned any service or something off.
Please tell me who to turn that system ON again? Thanks a lot!
PS : In device manager , there is "Other Devices" with Unknow Device (and an exclaimation mark on it) .

Charms -> Settings -> Power -> Shut down
x220 | i5-2520m | Intel ssd 320 series | Gobi 2000 3G GPS | WiFi
x220 | i5-2520m | hdd 320 | Intel msata ssd 310 series | 3G GPS | WiFi
Do it well, worse becomes itself
Русскоязычное Сообщество   English Community   Deutsche Community   Comunidad en Español

Similar Messages

  • Premier/encore-how do I auto detect scene change, generate chapters?

    I am new to DVD work. I have family movies that I am taking from Beta tape, driving video through my 8 MM video cam-corder as the video capture device, into premier capture via firewire. I have used premier to edit out some dead time and other junk. Now I want to auto-generate chapters based on scene changes for a starting set of chapter marks. Then I want to tweak these and feed this into encore and create a family movie DVD with a start menu like a movie menu that has chapters. How can/should I generate the first set of chapter marks? Thanks.

    I don't know of any automatic ways to do this; however, you should be able to do this relatively quickly by hand.
    Use keyboard shortcuts to move and insert chapters. Make sure you select your video track first (click somewhere on it) and then use
    PageDown to move from one clip to the next and
    * to insert chapters at the beginning of each new clip. If you want to make transitions a bit smoother,
    Ctrl-D will insert the default transition at that point as well. Even if you have a lot of clips, this should only take minutes.
    The process will only work if you have not yet merged all of your video into a single stream. If you have, you'll need to hunt some more for a solution.
    Good luck.

  • How to disable auto detect browser settings

    When I want to start scan to Optimize Internet in "Easy Solve" feature of Comcast. It says DISABLE AUTO-DETECT BROWSER SETTINGS to enable scan running. Please send me the answer.

    Is this page accessible to non-subscribers? If so, please provide a URL. If not, hopefully Comcast can answer this question.

  • How to turn auto-correction the opposit way?

    The auto-correction Works the way that I as a user has to recject the suggestion from the system, if not, the suggestion will be put into mytext.  This is really anoying and completeley unlogical to me.  It should be the way that I should actively chose the suggestion, if not, my own text should be prefered.  Is there a way to turn this upside down the way that the system's suggestion only reamin as a suggestion until I actively chose it?  In case not, why not?

    to do that you need to go back to Pages 4

  • How does the auto-detection of email settings work?

    I manage an exchange server for work which I have setup IMAP access for external email clients. Blackberry users can connect if they manually enter the settings, but it will not detect the settings automatically which means anytime someone gets a blackberry they bring it to me to setup.
    Is there something I can do on this end to ensure that BIS can detect the settings for our server?

    Description            IMAP Requirements for BIS
    command support            -SEARCH, SELECT, INBOX
    connections                   -must be accepted on port 143 or 993
    destination servers         -must return the logon prompt within 15 seconds of connecting
    external mail account      -password protected
    connection security        -The connection security is dependant on the destination server accepting the connection. The BlackBerry Internet Service can establish a connection through SSL on port 993 or use plain text authentication on port 143. 
    Click on KUDOS to appreciate our efforts and mark the thread RESOLVED if your issue is resolved.

  • How to turn off automatic font changes  in pages

    When I move the cursor across the screen it often reduces the size of the fonts in the cells.  How can I stop it? 

    Thanks june
    I have no trackpad for my iMac and I left the delivered mouse in its box.
    Its size doesn't match my hand's one so after two hours of use, I suffer from cramps.
    I use my good old Wacom mouse with my good old Wacom tablet. I may work with it without cramps all day long.
    If I have some spare time, I will test with the gestures on the Apple mouse.
    Yvan KOENIG (VALLAURIS, France) samedi 25 juin 2011 11:41:21
    iMac 21”5, i7, 2.8 GHz, 4 Gbytes, 1 Tbytes, mac OS X 10.6.7
    Please : Search for questions similar to your own before submitting them to the community
    To be the AW6 successor, iWork MUST integrate a TRUE DB, not a list organizer !

  • Hardware changes might not have been detected

    Hello,
    I am getting the error message "hardware changes might not have been detected" for five days now. Using HP Pavillion g6Notebook PC/Product No. : D8Q59EA#ABF running OS Windows 8 (not wanting to upgrade to 8.1)
    After Windows automatic security and KB updates, and HP update, five days ago I started having error messages when trying to watch videos online. Video would start and five seconds in 'black-out' with error message 'unable to play video' imbeded in video itself. I then noticed sound abscence on my laptop and noted that although all sound controls are at proper settings, there is no sound. Device manager is showing NO exclaimation marks or warnings. HP Action center is saying 'no issues' and Control Panel automated fix tools are all coming back as 'unable to fix problem', OR, when running troubleshooter in CP for hardware and devices getting the "hardware changes might not have been detected message". I have tried using a restoration point to before issues began, which temporarily fixes the sound issue but it then goes off again. Same with 'HP recovery' option for 'drivers', temporary fix that does not remain. Tried 'system restore' from a restoration point just done where sound WAS working but even that, once done, quickly lost the sound. Tried Microsoft onliine auto fix tools and they too are unable to fix the problem. Windows updates all up to date, no 'optional updates' available other than Bing Desktop and Microsoft Silverlight, both of which I do not want or need. Drivers all up to date it appears, including with HP Updates. Intuitively it feels as if the drivers are up to date, recognized and functioning, but then 'something' is 'disconnecting' their recognition/functioning, IF it is in fact even a driver issue. I have been reading for several days and narrowed it down to that. Seen a few articles re the EXACT same problem referenced on an OS Windows 7, but not ONE where a solution that fixes the problem exist! Thank you in advance for your help and please advise if further details are required.  I have added no new hardware recently, or ever, in fact to my laptop, only Kaspersky Pure MANY months ago and it is working perfectly without conflicts.  Thanks again.
    Copy of error message:
    the troubleshoot says that "hardware changes might not have been detected"
    i do not know what hardware it regards with... just that statement was found,,,,,
    WHEN I VIEW THE DETAILED INFORMATION ......
    (this was the exact statement when i visited the troubleshooting report)
    Hardware and Devices
    Publisher details
    Issues found
    Hardware changes might not have been detected
    Hardware changes might not have been detected
    Detected
    Scan for recent hardware changes
    Completed
    Potential issues that were checked
    Windows Update configured to never install drivers
    Windows Update configured to never install drivers
    Driver updates aren't automatically installed when detected by Windows Update.
    Issue not present
    Issues found
    Detection details
    6
    Hardware changes might not have been detected
    Detected
    Scan for recent hardware changes
    Completed
    Scanning might find new devices attached to your computer and install them.
    Potential issues that were checked
    Detection details
    Windows Update configured to never install drivers
    Issue not present
    Driver updates aren't automatically installed when detected by Windows Update.
    (this was the publisher details)
    Hardware and Devices
    Use hardware and access devices connected to your computer.
    Package Version:
    1.1
    Publisher:
    Microsoft Windows
    Hardware and Devices
    Use hardware and access devices connected to your computer.
    Package Version:
    1.0
    Publisher:
    Microsoft Corporation

    Hi RedmoonWolf,
    Bit of a puzzler of an issue for sure. And you're right, there's very little out there in terms of similar error messages, and how to fix them.
    I would consider going to the Windows Update window, and noting which ones went through lately. Then, another place to start first might be to go back to that same restore point again, and this time halting the automatic updates.
    Once that is stable again, try updating any browsers you use, and also Adobe flash, as a lot of videos work off of that.
    Secondly, before doing any more updates, go ahead and run the system file checker - might be something that it'll catch and fix: http://support.microsoft.com/kb/929833
    Finally, if all is going alright, create another restore point, and then try the updates again, hopefully this time around they'll work
    *** If my reply was helpful, please click on the "Kudos Thumbs-Up" on the right, as a way to say "Thanks!".
    If this reply also fixed your issue - please click the "Accept as Solution" button, so that others can find the same answer. ***

  • How do I turn auto-correct off and still have a spell check?

    How do I turn auto-correct off and still have a spell check?

    I do not believe this.. you can not disable auto correct without disabling the spell checker.. I am struck dumb by this.. I recently bought a mac for the first time.. ive always used windows.. there are more thngs like this than i expected.. I actually find this so ignorant I am lost for words.. this auto correct is a nightmare for me.. and has already caused me a lot of trouble because I have sent emails where words have been changed and i didnt notice and I have unknowingly insulted people.. i use a regular spell checker quite often but apparently I simply have no choice with safari.. oh well I am going to have to find another browser then.. goodbye safari!.. I also use a lot of shortened words and names etc etc.. like for eg I used the shortened word for problems "probs" and it changes it to "probe" and then i go back and change it back to WHAT I WANT TO SAY and it changes it AGAIN!!!!
    Does anyone else feel like this is yet another example of how, more and more, we are being treated like morons?
    Ok I'll try to stop ranting.. the real point is it should be possible to have a spell checker without auto correct..

  • Turn off Auto Detect Settings in IE using GPO

    As a follow-up on some kind of bug in sharepoint ( http://social.technet.microsoft.com/Forums/en/sharepointgeneral/thread/f3dbe651-be99-491b-8c6c-fc4792ae0b22 ) I need to turn off Auto detect settings in IE on all my clients, as this speeds up sharepoint
    on many clients.
    "The Internet Explorer Maintenance settings can be set in two modes: policy mode (to enable by Computer Configuration\Administrative Templates\System\Group Policy\Internet Explorer Maintenance policy processing) or preference mode(to enable by right-clicking
    Internet Explorer Maintenance)." (snipped from http://social.technet.microsoft.com/Forums/en-US/winserverGP/thread/57d81da5-de30-4930-8649-197d204b2a6c )
    Well, I have problem configuring Automatically detect settings. I have no trouble changing other parts of the same policy (changes are applied to all my computers), e.g. trusted sites and such. However I cannot turn off Auto Detect settings. I wonder if unchecking
    Auto Detect Settings really means "no change"/unconfigured?
    Is the only option then to use a hardcoded reg change?
    HKEY_CURRENT_USER\SOFTWARE\Policies\Microsoft\Internet Explorer\ControlPanel\Autoconfig ?

    As of IE10/11, this should be set in Group Policy Preferences:  [https://msdn.microsoft.com/en-us/library/dn338129.aspx]
    User Configuration
       └ Preferences
          └ Control Panel Settings
             └ Internet Settings
    Create a new IE10 configuration.
    Remember you can enable or disable these settings within a preference item by pressing function keys:
    F5
    Enable all settings on the current tab.
    F6
    Enable the currently selected setting.
    F7
    Disable the currently selected setting.
    F8
    Disable all settings on the current tab.

  • HOW TO TURN $6 INTO $6,000!!!!!! READING THIS COULD CHANGE YOUR LIFE!

    HOW TO TURN $6 INTO $6,000!!!!!! READING THIS COULD CHANGE
    YOUR LIFE!
    I found this on a bulletin board and decided to try it. A
    little while back,
    I was browsing through newsgroups, just like you are now, and
    came across an
    article similar to this that said you could make thousands of
    dollars within
    weeks with only an initial investment of $6.00! So I thought,
    Yeah right,
    this must be a scam,but like most of us, I was curious, so I
    kept reading.
    Anyway, it said that you send $1.00 to each of the 6 names
    and address
    stated in the article. You then place your own name and
    address in the
    bottom of the list at #6, and post the article in at least
    200 newsgroups.
    (There are thousands) No catch, that was it. So after
    thinking it over, and
    talking to a few people first, I thought about trying it. I
    figured: what
    have I got to lose except 6
    stamps and $6.00, right? Then I invested the measly $6.00.
    Well GUESS
    WHAT!!...
    within 7 days, I started getting money in the mail! I was
    shocked! I figured
    it would end soon, but the money just kept coming in. In my
    first week, I
    made about $25.00. By the end of the second week I had made a
    total of over
    $1,000.00! In the third week I had over $10,000.00 and it's
    still growing.
    This is now my fourth week and I have made a total of just
    over $42,000.00
    and it's still coming in rapidly. It's certainly worth $6.00,
    and 6 stamps,
    I have spent more than that on the lottery!! Let me tell you
    how this works
    and most importantly, why it works....Also, make sure you
    print a copy of
    this article NOW, so you can get the information off of it as
    you need it. I
    promise you
    that if you follow the directions exactly, that you will
    start making more
    money than you thought possible by doing something so easy!
    Suggestion: Read this entire message carefully! (Print it out
    or download
    it.) Follow the simple directions and watch the money come
    in! It's easy.
    It's legal. And, your investment is only $6.00 (Plus postage)
    IMPORTANT: This is not a rip-off; it is not indecent; it is
    not illegal; and
    it is virtually no risk - it really works!!!! If all of the
    following
    instructions are adhered to, you will receive extraordinary
    dividends.
    PLEASE NOTE: Please follow these directions EXACTLY, and
    $50,000 or more can
    be yours in 20 to 60 days. This program remains successful
    because of the
    honesty and integrity of the participants. Please continue
    its success by
    carefully
    adhering to the instructions. You will now become part of the
    Mail Order
    business. In this business your product is not solid and
    tangible, it's a
    service. You are in the business of developing Mailing Lists.
    Many large
    corporations are happy to pay big bucks for quality lists.
    However, the
    money made from the mailing lists is secondary to the income
    which is made
    from people like you and me asking to be included in that
    list. Here are the
    4 easy steps to success:
    STEP 1: Get 6 separate pieces of paper and write the
    following on each piece
    of paper; PLEASE PUT ME ON YOUR MAILING LIST. Now get 6 US
    $1.00 bills and
    place ONE inside EACH of the 6 pieces of paper so the bill
    will not be seen
    through the envelope (to prevent thievery). Next, place one
    paper in each of
    the 6 envelopes and seal them. You should now have 6 sealed
    envelopes, each
    with a piece of paper stating the above phrase, your name and
    address, and a
    $1.00 bill. What you are doing is creating a service. THIS IS
    ABSOLUTELY
    LEGAL! You are requesting a legitimate service and you are
    paying for it!
    Like most of us I was a little skeptical and a little worried
    about the
    legal aspects of it all. So I checked it out with the U.S.
    Post Office
    (1-800-725-2161) and they
    confirmed that it is indeed legal! Mail the 6 envelopes to
    the following
    addresses:
    Mailing Adresses
    Stephanie Hicks
    1283 Evening Canyon
    Henderson NV 89014
    Ross Wilson
    202 Belmont Dr.
    Thibodaux, LA 70301
    James Small
    4690 Sierra St.
    Riverside, CA 92504
    Thomas G.
    P.O. Box 591939
    Houston, TX 77259
    S. Parker
    159 Main Street
    Dadeville, Alabama 36853
    A. Wyman
    9734 Landowne ct.
    Orlando, FL 32817
    STEP 2: Now take the #1 name off the list that you see above,
    move the other
    names up (6 becomes 5, 5 becomes 4, etc...) and add YOUR Name
    as number 6 on
    the list.
    STEP 3: Change anything you need to, but try to keep this
    article as close
    to
    original as possible. Now, post your amended article to at
    least 200
    newsgroups. (I think there are close to 24,000 groups) All
    you need is 200,
    but remember, the more you post, the more money you make!
    This is perfectly
    legal! If you have any doubts, refer to Title 18 Sec. 1302
    & 1341 of the
    Postal lottery laws. Keep a copy of these steps for yourself
    and, whenever
    you need money, you can use it again, and again.
    PLEASE REMEMBER that this program remains successful because
    of the honesty
    and integrity of the participants and by their carefully
    adhering to the
    directions. Look at it this way. If you are of integrity, the
    program will
    continue and the money that so many others have received will
    come your way.
    NOTE: You may want to retain every name and address sent to
    you, either on a
    computer or hard copy and keep the notes people send you.
    This VERIFIES that
    you are truly providing a service. (Also, it might be a good
    idea to wrap
    the $1 bill in dark paper to reduce the risk of mail theft.)
    So, as each
    post is downloaded and the directions carefully followed, six
    members will
    be reimbursed for their participation as a List Developer
    with one dollar
    each. Your name will move up the list geometrically so that
    when your name
    reaches the #1 position you will be receiving thousands of
    dollars in
    CASH!!! What an opportunity for only $6.00 ($1.00 for each of
    the first six
    people listed above) Send it now, add your own name to the
    list and you're
    in business!
    ---DIRECTIONS ----- FOR HOW TO POST TO NEWSGROUPS------------
    Step 1) You do
    not need to re-type this entire letter to do your own
    posting. Simply put
    your cursor at the beginning of this letter and drag your
    cursor to the
    bottom of this document, and select 'copy' from the edit
    menu. This will
    copy the entire letter into the computer's memory.
    Step 2) Open a blank 'notepad' file and place your cursor at
    the top of the
    blank page. From the 'edit' menu select 'paste'. This will
    paste a copy of
    the letter into notepad so that you can add your name to the
    list.
    Step 3) Save your new notepad file as a .txt file. If you
    want to do your
    postings in different settings, you'll always have this file
    to go back to.
    Step 4) Use Netscape or Internet explorer and try searching
    for various
    newsgroups (on-line forums, message boards, chat sites,
    discussions.) Step
    5) Visit these message boards and post this article as a new
    message by
    highlighting the text of this letter and selecting paste from
    the edit menu.
    Fill in the Subject, this will be the header that everyone
    sees as they
    scroll through the list of postings in a particular group,
    click the post
    message button. You're done with your first one!
    Congratulations...THAT'S
    IT! All you have to do is jump to different newsgroups and
    post away, after
    you get the hang of it, it will take about 30 seconds for
    each newsgroup!
    **REMEMBER, THE MORE NEWSGROUPS YOU POST IN, THE MORE MONEY
    YOU WILL MAKE!!
    BUT YOU HAVE TO POST A MINIMUM OF 200**
    That's it! You will begin receiving money from around the
    world within days!
    You may eventually want to rent a P.O.Box due to the large
    amount of mail
    you will receive. If you wish to stay anonymous, you can
    invent a name to
    use, as long as the postman will deliver it.
    **JUST MAKE SURE ALL THE ADDRESSES ARE CORRECT.** Now the WHY
    part: Out of
    200 postings, say I receive only 5 replies (a very low
    example). So then I
    made $5.00 with my name at #6 on the letter. Now, each of
    the 5 persons who just sent me $1.00 make the MINIMUM 200
    postings, each
    with my name at #5 and only 5 persons respond to each of the
    original 5,
    that is another $25.00 for me, now those 25 each make 200
    MINIMUM posts with
    my name at #4 and only 5 replies each, I will bring in an
    additional
    $125.00! Now, those 125 persons turn around and post the
    MINIMUM 200 with my
    name at #3 and only receive 5 replies each, I will make an
    additional
    $626.00! OK, now here is the fun part, each of those 625
    persons post a
    MINIMUM 200 letters with my name at #2 and they each only
    receive 5 replies,
    that just made me $3,125.00!!! Those
    3,125 persons will all deliver this message to 200 newsgroups
    with my name
    at #1 and if still 5 persons per 200 newsgroups react I will
    receive
    $15,625,00!With an original investment of only $6.00!
    AMAZING! When your
    name is no longer on the list, you just take the latest
    posting in the
    newsgroups, and send out another $6.00 to names on the list,
    putting your
    name at number 6 again. And start posting again. The thing to
    remember is:
    do you realize that thousands of people all over the world
    are joining the
    internet and reading these articles
    everyday?, JUST LIKE YOU are now!! So, can you afford $6.00
    and see if it
    really works?? I think so... People have said, "e;what if the
    plan is played
    out and no one sends you the money? So what! What are the
    chances of that
    happening when there are tons of new honest users and new
    honest people who
    are joining the internet and newsgroups everyday and are
    willing to give it
    a try?
    Estimates are at 20,000 to 50,000 new users, every day, with
    thousands of
    those joining the actual internet.
    Remember: play FAIRLY and HONESTLY and this will really work.

    HOW TO TURN $6 INTO $6,000!!!!!! READING THIS COULD CHANGE
    YOUR LIFE!
    I found this on a bulletin board and decided to try it. A
    little while back,
    I was browsing through newsgroups, just like you are now, and
    came across an
    article similar to this that said you could make thousands of
    dollars within
    weeks with only an initial investment of $6.00! So I thought,
    Yeah right,
    this must be a scam,but like most of us, I was curious, so I
    kept reading.
    Anyway, it said that you send $1.00 to each of the 6 names
    and address
    stated in the article. You then place your own name and
    address in the
    bottom of the list at #6, and post the article in at least
    200 newsgroups.
    (There are thousands) No catch, that was it. So after
    thinking it over, and
    talking to a few people first, I thought about trying it. I
    figured: what
    have I got to lose except 6
    stamps and $6.00, right? Then I invested the measly $6.00.
    Well GUESS
    WHAT!!...
    within 7 days, I started getting money in the mail! I was
    shocked! I figured
    it would end soon, but the money just kept coming in. In my
    first week, I
    made about $25.00. By the end of the second week I had made a
    total of over
    $1,000.00! In the third week I had over $10,000.00 and it's
    still growing.
    This is now my fourth week and I have made a total of just
    over $42,000.00
    and it's still coming in rapidly. It's certainly worth $6.00,
    and 6 stamps,
    I have spent more than that on the lottery!! Let me tell you
    how this works
    and most importantly, why it works....Also, make sure you
    print a copy of
    this article NOW, so you can get the information off of it as
    you need it. I
    promise you
    that if you follow the directions exactly, that you will
    start making more
    money than you thought possible by doing something so easy!
    Suggestion: Read this entire message carefully! (Print it out
    or download
    it.) Follow the simple directions and watch the money come
    in! It's easy.
    It's legal. And, your investment is only $6.00 (Plus postage)
    IMPORTANT: This is not a rip-off; it is not indecent; it is
    not illegal; and
    it is virtually no risk - it really works!!!! If all of the
    following
    instructions are adhered to, you will receive extraordinary
    dividends.
    PLEASE NOTE: Please follow these directions EXACTLY, and
    $50,000 or more can
    be yours in 20 to 60 days. This program remains successful
    because of the
    honesty and integrity of the participants. Please continue
    its success by
    carefully
    adhering to the instructions. You will now become part of the
    Mail Order
    business. In this business your product is not solid and
    tangible, it's a
    service. You are in the business of developing Mailing Lists.
    Many large
    corporations are happy to pay big bucks for quality lists.
    However, the
    money made from the mailing lists is secondary to the income
    which is made
    from people like you and me asking to be included in that
    list. Here are the
    4 easy steps to success:
    STEP 1: Get 6 separate pieces of paper and write the
    following on each piece
    of paper; PLEASE PUT ME ON YOUR MAILING LIST. Now get 6 US
    $1.00 bills and
    place ONE inside EACH of the 6 pieces of paper so the bill
    will not be seen
    through the envelope (to prevent thievery). Next, place one
    paper in each of
    the 6 envelopes and seal them. You should now have 6 sealed
    envelopes, each
    with a piece of paper stating the above phrase, your name and
    address, and a
    $1.00 bill. What you are doing is creating a service. THIS IS
    ABSOLUTELY
    LEGAL! You are requesting a legitimate service and you are
    paying for it!
    Like most of us I was a little skeptical and a little worried
    about the
    legal aspects of it all. So I checked it out with the U.S.
    Post Office
    (1-800-725-2161) and they
    confirmed that it is indeed legal! Mail the 6 envelopes to
    the following
    addresses:
    Mailing Adresses
    Stephanie Hicks
    1283 Evening Canyon
    Henderson NV 89014
    Ross Wilson
    202 Belmont Dr.
    Thibodaux, LA 70301
    James Small
    4690 Sierra St.
    Riverside, CA 92504
    Thomas G.
    P.O. Box 591939
    Houston, TX 77259
    S. Parker
    159 Main Street
    Dadeville, Alabama 36853
    A. Wyman
    9734 Landowne ct.
    Orlando, FL 32817
    STEP 2: Now take the #1 name off the list that you see above,
    move the other
    names up (6 becomes 5, 5 becomes 4, etc...) and add YOUR Name
    as number 6 on
    the list.
    STEP 3: Change anything you need to, but try to keep this
    article as close
    to
    original as possible. Now, post your amended article to at
    least 200
    newsgroups. (I think there are close to 24,000 groups) All
    you need is 200,
    but remember, the more you post, the more money you make!
    This is perfectly
    legal! If you have any doubts, refer to Title 18 Sec. 1302
    & 1341 of the
    Postal lottery laws. Keep a copy of these steps for yourself
    and, whenever
    you need money, you can use it again, and again.
    PLEASE REMEMBER that this program remains successful because
    of the honesty
    and integrity of the participants and by their carefully
    adhering to the
    directions. Look at it this way. If you are of integrity, the
    program will
    continue and the money that so many others have received will
    come your way.
    NOTE: You may want to retain every name and address sent to
    you, either on a
    computer or hard copy and keep the notes people send you.
    This VERIFIES that
    you are truly providing a service. (Also, it might be a good
    idea to wrap
    the $1 bill in dark paper to reduce the risk of mail theft.)
    So, as each
    post is downloaded and the directions carefully followed, six
    members will
    be reimbursed for their participation as a List Developer
    with one dollar
    each. Your name will move up the list geometrically so that
    when your name
    reaches the #1 position you will be receiving thousands of
    dollars in
    CASH!!! What an opportunity for only $6.00 ($1.00 for each of
    the first six
    people listed above) Send it now, add your own name to the
    list and you're
    in business!
    ---DIRECTIONS ----- FOR HOW TO POST TO NEWSGROUPS------------
    Step 1) You do
    not need to re-type this entire letter to do your own
    posting. Simply put
    your cursor at the beginning of this letter and drag your
    cursor to the
    bottom of this document, and select 'copy' from the edit
    menu. This will
    copy the entire letter into the computer's memory.
    Step 2) Open a blank 'notepad' file and place your cursor at
    the top of the
    blank page. From the 'edit' menu select 'paste'. This will
    paste a copy of
    the letter into notepad so that you can add your name to the
    list.
    Step 3) Save your new notepad file as a .txt file. If you
    want to do your
    postings in different settings, you'll always have this file
    to go back to.
    Step 4) Use Netscape or Internet explorer and try searching
    for various
    newsgroups (on-line forums, message boards, chat sites,
    discussions.) Step
    5) Visit these message boards and post this article as a new
    message by
    highlighting the text of this letter and selecting paste from
    the edit menu.
    Fill in the Subject, this will be the header that everyone
    sees as they
    scroll through the list of postings in a particular group,
    click the post
    message button. You're done with your first one!
    Congratulations...THAT'S
    IT! All you have to do is jump to different newsgroups and
    post away, after
    you get the hang of it, it will take about 30 seconds for
    each newsgroup!
    **REMEMBER, THE MORE NEWSGROUPS YOU POST IN, THE MORE MONEY
    YOU WILL MAKE!!
    BUT YOU HAVE TO POST A MINIMUM OF 200**
    That's it! You will begin receiving money from around the
    world within days!
    You may eventually want to rent a P.O.Box due to the large
    amount of mail
    you will receive. If you wish to stay anonymous, you can
    invent a name to
    use, as long as the postman will deliver it.
    **JUST MAKE SURE ALL THE ADDRESSES ARE CORRECT.** Now the WHY
    part: Out of
    200 postings, say I receive only 5 replies (a very low
    example). So then I
    made $5.00 with my name at #6 on the letter. Now, each of
    the 5 persons who just sent me $1.00 make the MINIMUM 200
    postings, each
    with my name at #5 and only 5 persons respond to each of the
    original 5,
    that is another $25.00 for me, now those 25 each make 200
    MINIMUM posts with
    my name at #4 and only 5 replies each, I will bring in an
    additional
    $125.00! Now, those 125 persons turn around and post the
    MINIMUM 200 with my
    name at #3 and only receive 5 replies each, I will make an
    additional
    $626.00! OK, now here is the fun part, each of those 625
    persons post a
    MINIMUM 200 letters with my name at #2 and they each only
    receive 5 replies,
    that just made me $3,125.00!!! Those
    3,125 persons will all deliver this message to 200 newsgroups
    with my name
    at #1 and if still 5 persons per 200 newsgroups react I will
    receive
    $15,625,00!With an original investment of only $6.00!
    AMAZING! When your
    name is no longer on the list, you just take the latest
    posting in the
    newsgroups, and send out another $6.00 to names on the list,
    putting your
    name at number 6 again. And start posting again. The thing to
    remember is:
    do you realize that thousands of people all over the world
    are joining the
    internet and reading these articles
    everyday?, JUST LIKE YOU are now!! So, can you afford $6.00
    and see if it
    really works?? I think so... People have said, "e;what if the
    plan is played
    out and no one sends you the money? So what! What are the
    chances of that
    happening when there are tons of new honest users and new
    honest people who
    are joining the internet and newsgroups everyday and are
    willing to give it
    a try?
    Estimates are at 20,000 to 50,000 new users, every day, with
    thousands of
    those joining the actual internet.
    Remember: play FAIRLY and HONESTLY and this will really work.

  • Upon startup Firefox says "Proxy is refusing connections." When I select "Auto-Detect Proxy" from Advanced settings and solve problem, changes are not saved and upon next startup I must select again...!

    Firefox 4 was working fine. Then one day, when I started up Firefox, it says "Proxy is refusing connections." I solved this by selecting "Auto-Detect Proxy" from Advanced network settings, but my changes are not saved and upon every start-up I must select it again! (I even completely removed my webroot antivirus protection, as it as hindering many proxy related programs, but this seems to not be the source of the problem)

    You can find the connection settings in Tools > Options > Advanced : Network : Connection
    If you do not need to use a proxy to connect to internet then select "No Proxy"
    See "Firefox connection settings":
    * https://support.mozilla.com/kb/Firefox+cannot+load+websites+but+other+programs+can
    Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
    *Don't make any changes on the Safe mode start window.
    *https://support.mozilla.com/kb/Safe+Mode
    *https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes
    See also:
    *http://kb.mozillazine.org/Preferences_not_saved

  • How do you change a brush tool color in Photoshop13. The color chart that has always been on the right side of the screen is gone and I cannot find out how to turn it on

    How do you change a brush tool color in Photoshop13. The color chart that has always been on the right side of the screen is gone and I cannot find out how to turn it on

    I now have the pallete on the right side of my screen. But, I am unable to change the color of the brush. I move the eye dropper over red and click on it. A panel comes saying 'Pure Red', I click ok but the brush color does not change.
    David Miller
    [email protected]

  • How to turn of "Automatic Start/Stop Detection for HDV Caputre

    Hello,
    I'm pulling my hair out trying to capture HDV 1080i-50 without getting separate clips created by the metadata at the start and stop of each shot. It's that feature called "Automatic Start/Stop Detection." I'm not talking about "Make new clip on timecode break."
    How can I turn this Start/Stop thing off. I don't want all these **** clips everytime the cameraman hit the record button.
    Anyone know how to turn it off so it stops making separate clips?
    Thanks!
    Kirk

    Yeah, Andy. It helps to have the manual!! THANKS. It says... Select or deselect "+Create new clip on Start/Stop+ checkbox in the Clip Settings Tab of the Log and Capture window."
    It's strange that I was looking for that kind of a box in all the various settings but not in the log/capture window.
    Kirk out.

  • At uni i need to run proxy on 'auto detect mode' but then at home/work this mode makes my internet browsing very slow. Can i do something about this without having to change settings everytime i change locations? running V3.6.8 on OSX

    At uni I need to run proxy on 'auto detect mode' but then at home/work this mode makes my internet browsing very slow. Can I do something about this without having to change settings every time I change locations? running V3.6.8 on OSX

    You can look at these extensions:
    *FoxyProxy: https://addons.mozilla.org/firefox/addon/2464
    *QuickProxy: https://addons.mozilla.org/firefox/addon/1557
    *SwitchProxy: https://addons.mozilla.org/firefox/addon/125

  • How to turn on auto capitalization on my mac?

    Hey guys,
    I want to know how to turn on auto capitalization on my mac. Because this helps me to type faster in pages, keynote, etc.
    Could y'all help me out?

    because Apple has most of its products, phones tablets and software that start with small letters despite being proper nouns, in Apple's world it's normal to use small letters for proper nouns and start sentences with small letters.
    you will have to get used to the shift button and get a bit slow on your typing. after some time you'll get used to it.
    this does sound frustrating but i agree with other users that the fact that you are using an expensive Mac does not relegate you to inferior word processors. go ahead and install office for Mac and enjoy!

Maybe you are looking for

  • Need help with new Time Capsule/Airport express setup!

    I just hooked up a 500g time capsule to replace an airport extreme, and now my airport utility on my MacbookPro Retina no longer recognizes the airport expresses I had on my network for airplay purposes.  Can anyone help with this issue?

  • CP7 Rollover images Show up every OTHER slide

    I am using CP7 and I have a number of graphics on slide 1 that I have defined to have a 'rest of project' timing. I have made multiple groups of graphics on slide 1 and I have made them to NOT be 'visible in output' this way, when I need them, I can

  • How to get JMS through a firewall from a protected zone to DMZ?

    Hi,           We are going to access a server running WL6.1 from a java VM in the DMZ. The           access methods are JMS and RMI.           The IT staff say that we only need to specify what ip's, ports and protocols           to use, and they wil

  • Solaris 10 b69  and EPIA Mini-ITX Boards

    I am trying to install the Solaris 10 on a EPIA PD see http://www.viaembedded.com/product/epia_PD_spec.jsp?motherboardId=241 for details But then when it starts loading the kernel (no matter which install option I choose) as it passes controll to the

  • Forecasting issue

    Hi, The consumption values which I entered in the forecasting view of the material master are in whole numbers then why are my forecast values coming in decimals? What setting do I need to do so that my forecast values are in whole numbers ands not i