How to turn off actionscript error alerts?

I have to give a demo tomorrow and there are some flash modules that were done in earlier versions of Flash that while they work just fine, they throw up a really annoying error and make the presentation look bad. Is there some preference to turn these off at least temporarily?

From http://livedocs.adobe.com/livecycle/es/sdkHelp/programmer/lcds/wwhelp/wwhimpl/common/html/ wwhelp.htm?context=LiveDocs_Parts&file=logging_3.html:
Operating system
Location of mm.cfg file
Mac OS X
MacHD:Library:Application Support:macromedia:mm.cfg
Microsoft Windows XP
C:\Documents and Settings\user_name\mm.cfg
Windows 2000
C:\mm.cfg
Linux
home/user_name/mm.cfg

Similar Messages

How to turn off "CD Imported Alert" for itunes

I have a radio show where I play music from my computer while I am importing CDs and I need to know how to turn off the alert sound in itunes that tells me that a cd has been completely imported such that it will not play on my show. I just cannot find the setting to turn it off though. Please help.

If you're doing a radio show, chances are you don't want ANY of the silly sound effects coming through your speakers. At least, I wish everyone doing audio work did that. (I hear that dumb Windows click all the time on the local NPR station.) Anyway, if you go into "System Preferences" and click on "Sound", use the "Sound Effects" tab to set the alert volume all the way to the left (off). And, while you're there, uncheck the 3 radio buttons below about playing sound effects. That should do it.

Safari and webmail email alerts - how to turn off?

One of the webmails I use has annoying feature - it alerts me with every incoming email. Safari icon starts to jump at the Dock and a small window appears telling me that I have email!
I have searched my webmail settings but there is no way to turn it off. So there should be one at the Safari or Mac settings but I did not find anything there either! I have turned off pop-ups but apparently this small "thing" that appears is not considered a pop-up.
Can anyone help me how to turn off this distraction?
Sasha
P.S. My Mac is iMac Intel and Safari is 2.0.4

There is an option under Preferences > Auto-Correction to "Automatically detect email and web addresses." You want that one unchecked. There is also a link inspector, second from the right, with options to enable hyperlinks or make all hyperlinks inactive. Seems contradictory to me & I've found that if a document already has some linked text, changing these preferences doesn't change the existing links. And, if you paste in something with a link the link will still be active.

How to turn off categorization for case management

Hopefully a simple one, how to turn off categorization for case management.
I get this error in CRM 5.0 when choosing Cases.
CASE_MANAGEMENT, CASE_TYPE, Z_01
My categorization in the IC profile is set to ZDEFAULT (copy of default) but only contains
IR     Interaction Record
SO     Service Order
ST     Service Ticket
Does not have the CA case entry that is in DEFAULT.
Z_01 is my case type but I see no place to set the categorization.
I think I am missing something easy but don't see it.

I'm guessing zdefault had same description default and it was picking up the default one in error.

NOT SURE HOW TO TURN OFF RESTRICTIONS AS i DO NOT HAVE A PASSCODE

not sure how to turn off restrictions

Are restrictions enabled? If they are and you don't know the restrictions passcode:
If You Are Locked Out Or Have Forgotten Your Passcode
iTunes 10 for Mac- Update and restore software on iPod, iPhone, or iPad
iPhone, iPad, iPod touch: Wrong passcode results in red disabled screen
iOS- Understanding passcodes
     If you have forgotten your Restrictions code, then follow the instructions
     below but DO NOT restore any previous backup. If you do then you will
     simply be restoring the old Restrictions code you have forgotten. This
     same warning applies if you need to restore a clean system.
A Complete Guide to Restore or Recover Your iDevice (if You Forget Your Passcode)
If you need to restore your device or ff you cannot remember the passcode, then you will need to restore your device using the computer with which you last synced it. This allows you to reset your passcode and re-sync the data from the device (or restore from a backup). If you restore on a different computer that was never synced with the device, you will be able to unlock the device for use and remove the passcode, but your data will not be present. Refer to Updating and restoring iPhone, iPad and iPod touch software.
Try restoring the iOS device if backing up and erasing all content and settings doesn't resolve the issue. Using iTunes to restore iOS devices is part of standard isolation troubleshooting. Restoring your device will delete all data and content, including songs, videos, contacts, photos, and calendar information, and will restore all settings to their factory condition.
Before restoring your iOS device, Apple recommends that you either sync with iTunes to transfer any purchases you have made, or back up new data (data acquired after your last sync). If you have movie rentals on the device, see iTunes Store movie rental usage rights in the United States before restoring.
Follow these steps to restore your device:
     1. Verify that you are using the latest version of iTunes before attempting to update.
     2. Connect your device to your computer.
     3. Select your iPhone, iPad, or iPod touch when it appears in iTunes under Devices.
     4. Select the Summary tab.
     5. Select the Restore option.
     6. When prompted to back up your settings before restoring, select the Back Up
         option (see in the image below). If you have just backed up the device, it is not
         necessary to create another.
     7. Select the Restore option when iTunes prompts you (as long as you've backed up,
         you should not have to worry about restoring your iOS device).
     8. When the restore process has completed, the device restarts and displays the Apple
         logo while starting up:
           After a restore, the iOS device displays the "Connect to iTunes" screen. For updating
          to iOS 5 or later, follow the steps in the iOS Setup Assistant. For earlier versions of
          iOS, keep your device connected until the "Connect to iTunes" screen goes away or
          you see "iPhone is activated."
     9. The final step is to restore your device from a previous backup.
If you can not restore your device then you will need to go to recovery mode.
Placing your device into recovery mode:
Follow these steps to place your iOS device into recovery mode. If your iOS device is already in recovery mode, you can proceed immediately to step 6.
     1. Disconnect the USB cable from the iPhone, iPad, or iPod touch, but leave the other end
         of the cable connected to your computer's USB port.
     2. Turn off the device: Press and hold the Sleep/Wake button for a few seconds until the
         red slider appears, then slide the slider. Wait for the device to turn off.
          If you cannot turn off the device using the slider, press and hold the Sleep/Wake
          and Home buttons at the same time. When the device turns off, release the Sleep/Wake
          and Home buttons.
     3. While pressing and holding the Home button, reconnect the USB cable to the device.
         The device should turn on. Note: If you see the screen pictured below, let the device
         charge for at least ten minutes to ensure that the battery has some charge, and then
         start with step 2 again.
     4. Continue holding the Home button until you see the "Connect to iTunes" screen.
         When this screen appears you can release the Home button.
     5. If necessary, open iTunes. You should see the following "recovery mode" alert:
     6. Use iTunes to restore the device.
If you don't see the "Connect to iTunes" screen, try these steps again. If you see the "Connect to iTunes" screen but the device does not appear in iTunes, see this article and its related links.
Additional Information:
Note: When using recovery mode, you can only restore the device. All user content on the device will be erased, but if you had previously synced with iTunes on this computer, you can restore from a previous backup. See this article for more information.

How complitely turn off computer?

How complitely turn off computer?

Are you talking about where it shuts itself down after going through the shutdown routine? If it's not doing it automatically when you issue a "shutdown -r now" (or the like) then it's probably an issue with power management. There's a few ways to tackle that. Either use APM or ACPI. ACPI tends not to work all that great on computers that have really old bios. In that case it's better to utilize APM. Probably your issue is that the your system may not support ACPI very well or even at all. However, it may support it, but the kernel is turning it off by default from detecting your BIOS being dated beyond a certain point in time. They did that to error on the side of caution. They opted to choose a conservative default assumption since it makes more sense in that at least most systems will be able to boot up without any problems by default.
My computer used to be able to shutdown automatically through the use of APM, but not ACPI (ran into this issue when I upgraded my kernel from 2.4 series to 2.6 series back when I ran with Debian), but I ended updating it's BIOS and it worked fine with ACPI from there on. My system is pretty old too, so it doesn't completely implement ACPI. I think it's laptops that tend to make fuller use of ACPI anyway. However, it seems like most desktops with the last 8 or so years make some minimal use of it at least. So you can see there is many ways to approach this issue.
First thing to try is to look around in your BIOS setup to see if there is any ACPI related setting, like mentioned earlier. That's a good place to start. If you don't see any settings, it either means that your BIOS setup either don't allow you to set ACPI, doesn't support it, or just the current version of your BIOS doesn't allow changing related settings or make use of it. So naturally, the next thing to check is the manufacturer's sight for your motherboard and find any BIOS related info.
Upgrading the BIOS is probably the most elegent solution but it can be openning up a whole can worms if you don't know what you're doing. If you botch flashing the BIOS you run the risk of turning your motherboard into a paper weight. So the key there is make sure you at least read your manufacturer's instructions carefully and also make sure that your use the right utils and BIOS version for your BIOS and motherboard. And don't dare have a power failure or shut the system off while it's rewriting the boot block. That where people run into a serious problem of rendering their system completely unbootable since the system no longer has the most basic of code needed to even get the system to a state that it can even begin bootstrapping. Technically, the motherboard isn't probably trashed, but at that point you have a chicken before the egg syndrome going on. You can't get it to boot far enough to boot to anything, much less a floppy, to be able to reflash the bios to get yourself out of the pickle. So when, and if that sort of thing happens, then it would require replacing the BIOS chip itself which may or may not require soldering.
Anyway, don't let that scare you, it's just to point out that when you're doing things like flashing a system's BIOS it's critical to do it right since it's modifying the system on such a fundimental low-level. If that part of the system isn't functional, everything else, like HD and floppy being able to load anything, is a moot point.
If all of that stuff makes you uncomfortable, you may opt to utilize APM instead. I can't remember exactly how to instruct the kernel to use APM instead of ACPI. I believe there is kernel parameter you can set in your bootloader's settings. I can't remember it off hand. Sorry.

How absolutely turn off computer if I use lilo boot loader?

How absolutely turn off computer if I use lilo boot loader?
With this /etc/lilo.conf content computer not absolutely turn off:
# /etc/lilo.conf
boot=/dev/hda
# This line often fixes L40 errors on bootup
# disk=/dev/hda bios=0x80
default=arch
timeout=0
lba32
prompt
image=/boot/vmlinuz26 append="apm=power-off"
label=arch
root=/dev/hda1
initrd=/boot/initrd26.img
read-only

Please provide some system specs so that we may give better advice. As phrakture has already said, you must have hardware that supports power management before auto shutdown works.

On connecting kshuffle generation 4 to ma system i-tynes turn off sayin error...wat should i do?

on connecting kshuffle generation 4 to ma system i-tynes turn off sayin error...wat should i do?

Do you see this when you are performing the steps? In step 4, before you release the home button, do you see the Connect to iTunes screen? If you do, is iTunes running on your computer? If iTunes isn't running - launch it on your own.
If you don't see the connect to iTunes screen, start all over again. But quit iTunes and restart your computer before you try again.
Placing your device into recovery mode
Follow these steps to place your iOS device into recovery mode. If your iOS device is already in recovery mode, you can proceed immediately to step 6.
Disconnect the USB cable from the iPhone, iPad, or iPod touch, but leave the other end of the cable connected to your computer's USB port.
Turn off the device: Press and hold the Sleep/Wake button for a few seconds until the red slider appears, then slide the slider. Wait for the device to turn off.If you cannot turn off the device using the slider, press and hold the Sleep/Wake and Home buttons at the same time. When the device turns off, release the Sleep/Wake and Home buttons.
While pressing and holding the Home button, reconnect the USB cable to the device. The device should turn on.
Note: If you see the screen pictured below, let the device charge for at least ten minutes to ensure that the battery has some charge, and then start with step 2 again.
Continue holding the Home button until you see the "Connect to iTunes" screen. When this screen appears you can release the Home button:
If necessary, open iTunes. You should see the following "recovery mode" alert:
Use iTunes to restore the device.
If you don't see the "Connect to iTunes" screen, try these steps again. If you see the "Connect to iTunes" screen but the device does not appear in iTunes, see this article and its related links.

Yoga 2 Pro -- how to turn off switching mode notifications -- e.g. "tent mode", "tablet mode", etc?

Does anyone know how to turn off the notifications that pop up in the upper right corner telling you that you have just changed from one configuration to another -- e.g. changing from tent mode to tablet mode?
Solved!
Go to Solution.

Just disable it -
Task manager > Startup > Click "Yoga Picks" > Click "disable"
Next time you start your computer no more annoying pop ups. If you want to be annoyed again you can always re-enable it.

I simply want to know how to turn off iCloud* without losing my contacts

Call me old fashioned, but I really do NOT want to use iCloud EXCEPT for ONE THING*: and that's to find my phone, ipad or laptop if it goes missing.
Having said that, I have figured out how to turn off icloud on my ipad and my iphone (I am not using the phone as a phone, just as a glorified ipod) while keeping the "find my ipad/iphone" function active, BUT
I can't quite figure out how to do it on my laptop.
I seem to have done it already for photos, and for the calendar, (I know this from checking iCloud to see what it's got) but just cannot figure out how to turn it off for contacts.
And YES, I've backed up all of those things at LEAST 3 different ways, I just don't want the Cloud to be one of them.
So can anyone tell me how to turn off contacts in the cloud without it also magically deleting them in my laptop? (I had it happen on the ipad, that's why I'm worried.)
Thank you for understanding-I'm older and this stuff just keeps getting more complicated and I'm a simple person. I'll back up my own stuff!

If you are refering to documents such as Pages and Numbers files....
The only way around this is to "save as" you icloud documents using the associated app to a local folder on your mac. Then turn off icloud.
Of course, when you sign off of icloud, the docs are removed from the mac, but remain in icloud. In the future when you sign back in, the documents are available to you again.
Oh, and the icloud documents are also stored locally in ...
~/Library/Mobile Documents
Note that Library in the user's home folder is now hidden, so you'll have to set Finder to view hidden files.
The Mobile Documents folder has subfolder where copies of the doc/data files are stored.
You can move these files to another folder to save them.

I'm using same icloud and same apple ID on two iphones. Now i get calls from same number on both iphones at the same time. How to turn off that?

I'm using same icloud and same apple ID on two iphones. Now i get calls from same number on both iphones at the same time. How to turn off that?

Apple ID's are not device specific, so when you changed it on the iPad 2 it changed it on the iPhone 4 as well, since it's the same account still. What you need to do is create a second Apple ID (so you'll have two accounts, one for iPhone 4 and a seperate one for iPad 2).
To create a new Apple ID on your iPad 2:
1) Go into Settings > Store.
2) If you are already signed in, tap your Apple ID on the screen and you will be given a few options, one of which is to sign out of your account.
3) After you sign out, now click the "Sign in" button.
4) Tap "Create New Apple ID" and follow the instructions on-screen.

HT4314 Does anyone know how to turn off the pics of your Game Center friends showing on the right side of the screen while playing a game?

Does anybody know how to turn off the pics of your Game Center friends that show while you're playing a game?

Swamava,
Thank you for the link you provided and I am glad I am not the only one with this problem, however beforeI install Adblock is it a free program or is there a fee you
must pay to download the program? I am some what hesitant to be oblighted to
a monthly or yearly bill.
i

How to switch off the error sound in Triversity

Hi
How to switch off the error sound in Triversity, The audio of the computer is already in mute state. The problem is found with DELL pc and not with HP

Mohammed,
There is, actually, a better way to get rid of that annoying beep every time you get a policy prompt, error, etc.
I have a Dell Vostro 1300 and I have done this in other Dell laptops with sucess. Perform the following:
Go to Control Panel --> System --> (on the HARDWARE tab) Click on DEVICE MANAGER
In DEVICE MANAGER, click on VIEW --> SHOW HIDDEN DEVICES
Now, go to "NON-PLUG AND PLAY DRIVERS" and you will see "BEEP" listed as an active device. Right click on it and select "DISABLE" and then reboot your laptop.
You should be golden right after the reboot.
Hope this helped,
Alfredo Carigga

How to turn off pop-up blocker

How to turn off pop-up blocker?

Are you speaking of the one in the Firefox browser or Firefox OS?
* Desktop Browser: [[Pop-up blocker settings, exceptions and troubleshooting]]

How to turn off voice over command in mac book pro 10.6.8

how to turn off voice over command in mac book pro 10.6.8

Open Universal Access preferences and disable it there.

How to turn off actionscript error alerts?

Similar Messages

Maybe you are looking for