How to turn off backups? They're adding 5-15 minutes to each sync.

In desperation, I just restored my phone from scratch. It only has 1 ringtone (Audio: 1.4MB) and some applications (Other: 391.1 Megabytes) on it, the rest is empty (Free: 14.26 GB). Yet every sync still takes around 10 minutes. Even if I just take it out of the dock for 10 seconds and put it back in, without doing anything to the phone, it takes 10 minutes to perform the sync.
How can I turn this off???

Resolved by a second restore of the phone.

Similar Messages

  • How to turn off backup disk temprorily

    Subject: Time Machine
    I want to retrieve some sensitive material off the internet but I do not want it backed up. Do I simply open the Time Machine icon and select the on/off switch to "off"? After I retrieve the material, do I reverse the switch to "on"? Does this action alter existing or future files on the backup disk?

    That'll work fine.
    You could also, when you download it, go to TM preferences>Options, and exclude it.
    Just remove it right before you delete it.
    Good luck!

  • How to turn off backups using dbconsole?

    Backups are currently being done by OEM using the dbconsole. I would like to disable that feature.

    You do the same from dbconsole as well comamnd line
    Go --> Maintenance-->Schedule backup
    SQL> select job_name from SYSMAN.MGMT_JOB where job_name like 'BACKUP%';
    JOB_NAME
    abc
    SQL> exec sysman.mgmt_jobs.STOP_ALL_EXECUTIONS('abc','SYS');
    SQL> exec sysman.mgmt_jobs.DELETE_JOB('abc','SYS');

  • How to turn off automatic backups in logic 8?

    How to turn off automatic backups in logic 8?
    there was the option to turn off auto backups in v.7.
    can't find it in 8...
    thanks for help!

    This option has been removed.

  • I am getting an error message while managing my cloud it says "cannot turn off backup" when i want to remove apps from the clous. how do i fix?

    i am getting an error message while managing my cloud it says "cannot turn off backup" when i want to remove apps from the clous. how do i fix?

    Hey ktillis88,
    Thanks for the question. Based on the information you have provided, the following resource may be helpful:
    iCloud: Understanding Backup alert messages
    http://support.apple.com/kb/TS4576
    "Backups for appname cannot be turned off at this time."
    This message occurs if disabling Backup for an app on your iOS device does not complete successfully. Wait a few minutes and then attempt to disable Backup for the app again. If you continue to receive this alert, contact iCloud Support for assistance.
    Thanks,
    Matt M.

  • Snap to points are turned off but they still keep snapping. WANT THEM OFF!! How do I do this?

    Snap to points are turned off but they still keep snapping to. WANT THEM OFF!! How do I do this? I've gone into preferences and view, turned off the snap to and it still happens. So when I scale. the points snap to and mess up my line quality.
    Please, anyone know how to fix this?

    Jason,
    In cases like this, the first guess is Align to Pixel Grid.
    You may select everything and then untick Align to Pixel Grid in the Transform palette, and also untick Align New Objects to Pixel Grid in the flyout options.
    You may avoid document types with that as default (RGB for web and the like) or change the default for such documents.

  • How to turn off encrypted backup on itunes

    how to turn off encrypted backup on itunes?

    porkchop_d_clown wrote:
    ...it does not mention encrypted back ups.
    Not so...
    From the supplied Link...
    iTunes and encrypted backups
    You can protect your backup with a passcode using the Encrypt Backup option in the Summary pane. Encrypting your backup will back up your Keychain. This way, email account passwords, Wi-Fi passwords, and passwords you enter into websites and some applications will be remembered when you transfer to a new device. Learn how tocreate and restore from a backup.
    When your backup is encrypted, you'll need to enter the password when enabling or disabling encryption or when restoring from this backup.

  • HT4623 How do I turn off aps with my new updated software?  They are not turning off like they used to.

    I just updated my software, now I don't know how to turn off aps.  I used to double tap the home button then hold down the ap until it shakes and the minus signs appear.  Now, I get no shaking and no minus sign.  What do I do?

    This short video show you how to do it:
    http://youtu.be/4cQNjSsd1xg
    It's a youtube video showing how to close apps in ios7 for iphone or ipad and save battery life.
    For those who like visual demonstration, hope this helps.

  • How to turn off frame edge highlighting in CS5?

    Has anyone discovered how to turn off the frame edge highlighting on rollovers. I find this feature visually distracting and quite annoying as I'm moving around a page. Send advice, please. Thx.

    Chief:
      Sorry we got off track and didn't post the main workaround for Frame Edge Highlighting: Keep your hand on the spacebar.
    This comes from  Mike Rankin in the InDesign Magazine Tip of the Week in January:
    TIP: Spring-Loaded Tools to the Rescue
    InDesign  tries very hard to help you align objects when you drag by snapping  them Do you dislike the Frame Edge Highlighting that appears when you  mouse over frames in CS5? Spring-loaded tools can help. Frame edge  highlighting only appears when you use one of the selection tools. With  spring-loaded tools, you can press and hold single keys to temporarily  switch to any other tool. As long as you hold the key for more than a  second, you'll switch back to your previous tool when you release the  key. You have plenty of choices (t, \, p, f, m, n, c, e, g, z, etc).
    Holding  the spacebar also prevents the highlighting from appearing, and it's a  nice big place for your fingers to rest. Heck, you don't even have to  pay much attention to where you press--just rest your hand in the middle  of the keyboard and lift it up when you want to select something. But  don't hold v or a, which are the shortcuts for the selection tools.
    - Mike Rankin
    (Mike had suggests this several times in the past year,  though not with the spacebar. E.g. he recommended 'H' back in June over  on
    InDesignSecrets. "H" for Hate).
    There have been several threads on this, including the locked 201-post monster, Frame edge highlighting, and the feature request Allow Frame Edge Highlighting to be turned off, and frame edge highlights on hover.
    Basically  the takeaway is that it only happens with the selection (V) and direct  selection (A) tools, and that multiple people have asked Adobe for a  control to turn it off, and they've finally added one, but only in CS5.5, not in a CS5 maintenance release.

  • NOT SURE HOW TO TURN OFF RESTRICTIONS AS i DO NOT HAVE A PASSCODE

    not sure how to turn off restrictions

    Are restrictions enabled? If they are and you don't know the restrictions passcode:
    If You Are Locked Out Or Have Forgotten Your Passcode
    iTunes 10 for Mac- Update and restore software on iPod, iPhone, or iPad
    iPhone, iPad, iPod touch: Wrong passcode results in red disabled screen
    iOS- Understanding passcodes
         If you have forgotten your Restrictions code, then follow the instructions
         below but DO NOT restore any previous backup. If you do then you will
         simply be restoring the old Restrictions code you have forgotten. This
         same warning applies if you need to restore a clean system.
    A Complete Guide to Restore or Recover Your iDevice (if You Forget Your Passcode)
    If you need to restore your device or ff you cannot remember the passcode, then you will need to restore your device using the computer with which you last synced it. This allows you to reset your passcode and re-sync the data from the device (or restore from a backup). If you restore on a different computer that was never synced with the device, you will be able to unlock the device for use and remove the passcode, but your data will not be present. Refer to Updating and restoring iPhone, iPad and iPod touch software.
    Try restoring the iOS device if backing up and erasing all content and settings doesn't resolve the issue. Using iTunes to restore iOS devices is part of standard isolation troubleshooting. Restoring your device will delete all data and content, including songs, videos, contacts, photos, and calendar information, and will restore all settings to their factory condition.
    Before restoring your iOS device, Apple recommends that you either sync with iTunes to transfer any purchases you have made, or back up new data (data acquired after your last sync). If you have movie rentals on the device, see iTunes Store movie rental usage rights in the United States before restoring.
    Follow these steps to restore your device:
         1. Verify that you are using the latest version of iTunes before attempting to update.
         2. Connect your device to your computer.
         3. Select your iPhone, iPad, or iPod touch when it appears in iTunes under Devices.
         4. Select the Summary tab.
         5. Select the Restore option.
         6. When prompted to back up your settings before restoring, select the Back Up
             option (see in the image below). If you have just backed up the device, it is not
             necessary to create another.
         7. Select the Restore option when iTunes prompts you (as long as you've backed up,
             you should not have to worry about restoring your iOS device).
         8. When the restore process has completed, the device restarts and displays the Apple
             logo while starting up:
               After a restore, the iOS device displays the "Connect to iTunes" screen. For updating
              to iOS 5 or later, follow the steps in the iOS Setup Assistant. For earlier versions of
              iOS, keep your device connected until the "Connect to iTunes" screen goes away or
              you see "iPhone is activated."
         9. The final step is to restore your device from a previous backup.
    If you can not restore your device then you will need to go to recovery mode.
    Placing your device into recovery mode:
    Follow these steps to place your iOS device into recovery mode. If your iOS device is already in recovery mode, you can proceed immediately to step 6.
         1. Disconnect the USB cable from the iPhone, iPad, or iPod touch, but leave the other end
             of the cable connected to your computer's USB port.
         2. Turn off the device: Press and hold the Sleep/Wake button for a few seconds until the
             red slider appears, then slide the slider. Wait for the device to turn off.
              If you cannot turn off the device using the slider, press and hold the Sleep/Wake
              and Home buttons at the same time. When the device turns off, release the Sleep/Wake
              and Home buttons.
         3. While pressing and holding the Home button, reconnect the USB cable to the device.
             The device should turn on. Note: If you see the screen pictured below, let the device
             charge for at least ten minutes to ensure that the battery has some charge, and then
             start with step 2 again.
         4. Continue holding the Home button until you see the "Connect to iTunes" screen.
             When this screen appears you can release the Home button.
         5. If necessary, open iTunes. You should see the following "recovery mode" alert:
         6. Use iTunes to restore the device.
    If you don't see the "Connect to iTunes" screen, try these steps again. If you see the "Connect to iTunes" screen but the device does not appear in iTunes, see this article and its related links.
    Additional Information:
    Note: When using recovery mode, you can only restore the device. All user content on the device will be erased, but if you had previously synced with iTunes on this computer, you can restore from a previous backup. See this article for more information.

  • How to turn off Safari encrypted or extensions

    how to turn off Safari encrypted connection or certificate extensions on safari HELP

    HTTPS and certificates are designed to make sure your connection to websites and the content your downloading is supposed to be who they are supposed to be from.

  • Turn off backups while restoring!

    I had a 500 GB disk that just went bad, but since all the data was backed up on another drive by Time Machine, I decided to restore to a new drive. This probably would have worked just fine, but I neglected to turn off backups, and this created a problem.
    I was restoring about 335 GB of data onto the new drive (which I had given the same name as the old drive) and Time Machine seemed to be working just fine, giving an estimate of about 5 hours for the copy to complete.
    However, when I checked the system this morning, the copy had aborted, with the reason being that the files no longer existed on the TM drive.
    What I think happened was this. TM kept on backing up files from the new drive, which resulted in its running out of space on the TM drive. So it automatically deleted old backups, including the one that I was restoring from.
    I wish that TM had been smart enough to avoid this problem, although I can see how I could have avoided it myself by turning off the backup function while doing the restore, or by having it warn me before deleting backups. Lesson learned.
    Happily, the files all seem to be intact and I'm restoring them now from the only backup that still exists, the one that TM made yesterday!

    Sorry, not realy that familiar with Windows :-(
    I am starting to get a bit confused myself.
    Could you be a bit more specific, what option you choose "Automatic Backup" during installation. What backup are you refering to?
    Did you make a screenshot of the installation proces, so that you can include this?
    Rob

  • 'save in subfolder' - how to turn off by default ?

    'save in subfolder' - how to turn off by default ?
    Thank you for any help with this,
    TB

    It is really annoying when settings/features are added that just assume a specific work process - without an option to turn them off (or complicated work arounds).  And even more annoying when I am asked to submit a feature request after adobe randomly changes things.
    This was not a random change. The ability to render image sequences into a sub-folder was a feature request that we have received many many times over the years. Many After Effects users, myself included, sometimes forget to manually create a folder for an image sequence with the result of hundreds or thousands of files exploding into the renders folder or your desktop or wherever the render was saved to.
    We answered not only this common feature request but extended the functionality to all formats by the following:
    Adding the Save in Subfolder control to create a folder for any output module
    Adding support for creating and using folder paths in output file name templates (which naturally interacts with the Save in Subfolder control)
    Adding a new output file name template that creates a folder, which is used by default for image sequences
    All of these additions were vetted by actual After Effects users before we released the After Effects CC (12.2) update.
    not sure why defaults have to be changed.
    Perhaps I didn't answer your original question directly: there is not a simple option to stop Save in Subfolder from being enabled when you choose an image sequence format. This would be an additional control on top of the rest of this new functionality. It's not something we thought was necessary as part of the original design of these changes, but we could be convinced to add it in the future. So if you (or anyone else) would like to see this added, please submit a feature request.
    The reason why you can get the result you want by changing default output file name template is because that is how the logic works in After Effects. Choosing an image sequence format triggers the use of the Comp Folder and Name template. Changing what that template contains will apply your new rules instead.
    Regardless of the template, you can always change the output file path on a case-by-case basis by simply unchecking Save in Subfolder or by choosing a different output file name template.

  • 2Wire Router Issues - How to Turn off Security

    There appears to be an ongoing issue with MacBook wireless and the 2Wire routers (via AT&T/SBC). My wireless was working fine until I downloaded the recent Apple updates.
    I saw one fix for this posted here:
    http://discussions.apple.com/thread.jspa?threadID=874076
    However, I do not know how to turn off the security to the router. Also, what would be the implications of doing so?
    Have any other MacBook/2Wire users had this issue and come up with a fix until Apple does? Just called Customer Service, and they don't have any fixes at this time.
    Thanks!

    You will need to follow the directions in the 2Wire user guide.

  • How to turn off 'motion blur' in advanced graphic?

    how to turn off 'motion blur' in advanced graphic?

    RealMyst is a game not an Apple application.
    They have their own forum:
    http://forums.steampowered.com/forums/forumdisplay.php?f=944

Maybe you are looking for