How to turn off brush size dialog when holdng stylus on tablet.

Yesterday I signed up to try the latest version of Photoshop (CC) from previously working in CS6.
There is a new behavior that when I hold down my stylus for more than a half-second or so on my tablet, a swirling circle icon appears and then a floating brush size dialog pops up.
I can't stand this, and want to turn it off or at least edit the settings, but I can't find anything in preferences about it.
PS CS6 does not have this behavior with the same tablet, so I think it has to do with Photoshop.
Any ideas?

Thanks for your reply. Yep, it's engaged. That button is very important to me. lol
This definitely seems like a Photoshop CC feature, not a tablet issue.
Here is a screenshot of what I mean:
That white circle in the upper left corner of the box comes up and "loads" the dialog when I press down on the tablet with my stylus. I just updated my tablet drivers last week.
This does not happen in Photoshop CS6, which I still have installed and have been using prior to this trial of CC.
Basically, I would at least like to increase the delay time of how long it takes for me to hold down my stylus before this behavior happens, if not disable it altogether. I don't have  the need for this feature and it gets in my way constantly.

Similar Messages

  • How to turn off Find My Iphone when screen is black?

    Hi all, I have an Iphone 4s and the screen has gone black. I have tried to restore thorugh itunes but i have to turn off Find my iphone through setting on my iphone before i can - but I can't.  I have tried deleting the account through icloud.com but that hasn't worked eitheir. Can any one help? Thanks

    According to Apple support, you cannot remove the phone on the device list under "find my iphone" until you turn it off and it goes offline.  (It also says the device will go back on "find my iphone" when it goes online again, which seems to mean you can successfully remove it, but as soon as you turn it back on it will be back on the list, and thus you will not be able to restore it.)  It's a bit of a conundrum.  In my case I couldn't for some reason turn off my phone  with the home/sleep buttons - nothing happens, the phone stays on.  While on a chat with Apple support, they got my iphone offline (I was able to turn it off by pressing the sleep button and swiping where the red "turn off iphone" arrow would have appeared) and removed it from "find my phone", but when I reconnected to itunes it turned on and reappeared in the "find my phone" list.  Luckily, the screen suddenly appeared (it had done this several times yesterday, just briefly), so I was able to turn off "find my device" from the phone.  I was then able to restore.  Unfortunately, this does not answer the question of how to remove the device from "find my iphone" and keep it off while connecting with itunes to restore (unless you have my good fortune of having the screen suddently reappear).  Apple support seemed puzzled that it had reappeared on the device list under "find my iphone".  Time will tell whether the restoration fixes the blank screen issue.

  • How to turn off "find my iphone" when all the buttons are disable about on/off in my icloud account?

    MY APPLE ID AND ICLOUD ACCOUNT HAVE BEEN HACKED COUPLE OF MONTHS AGO. ALL THE CONTENTS OF MY IPHONE HAS REMOVED. SO I HAVE RESTORED MY IPHONE BY USING MY OLD BACKUP. AND MY OLD ICLOUD ACCOUNT HAS RESTORED TO MY IPHONE AGAIN BUT THERE WAS NO ICLOUD ACCOUNT WITH MY EMAIL BECAUSE IT'S BEEN HACKED AND MY APPLE ID HAS BEEN SWITCHED TO HACKER'S EMAIL. SO I WAS NOT ABLE TO DELETE ICLOUD ACCOUNT, TO TURN OFF FIND MY IPHONE OR TO ERASE MY IPHONE. SO I M NOT STILL ABLE. I MEAN ALL THE BUTTONS IN MY ICLOUD ACCOUNT ARE DISABLE TO TAP. I WANNA ERASE MY IPHONE OR ERASE THE ICLOUD ACCOUNT.
    PLEASE HELP ME!!!!
    WAITING FOR YOUR RECOMMENDATIONS...

    According to Apple support, you cannot remove the phone on the device list under "find my iphone" until you turn it off and it goes offline.  (It also says the device will go back on "find my iphone" when it goes online again, which seems to mean you can successfully remove it, but as soon as you turn it back on it will be back on the list, and thus you will not be able to restore it.)  It's a bit of a conundrum.  In my case I couldn't for some reason turn off my phone  with the home/sleep buttons - nothing happens, the phone stays on.  While on a chat with Apple support, they got my iphone offline (I was able to turn it off by pressing the sleep button and swiping where the red "turn off iphone" arrow would have appeared) and removed it from "find my phone", but when I reconnected to itunes it turned on and reappeared in the "find my phone" list.  Luckily, the screen suddenly appeared (it had done this several times yesterday, just briefly), so I was able to turn off "find my device" from the phone.  I was then able to restore.  Unfortunately, this does not answer the question of how to remove the device from "find my iphone" and keep it off while connecting with itunes to restore (unless you have my good fortune of having the screen suddently reappear).  Apple support seemed puzzled that it had reappeared on the device list under "find my iphone".  Time will tell whether the restoration fixes the blank screen issue.

  • How to turn off linking on folder when publishing it as portlet

    when I publish a folder as a portlet. The display name of the
    portlet becomes a link. I just want to display the folder items
    under the name rather than have a link on the name. It confuses
    the users and looks weird. How do I turn it off?

    You'll have to wait for the next release. The only solution in
    the current release is to turn off portlet headers in the region.
    Regards,
    Jerry

  • How to turn off tone that sounds when importing is done?

    Hello,
    Is it possible to stop iTunes from making the sound it does after I've imported a cd?
    I have Windows XP media center, and I went to the "Sounds and Audio Devices" folder in Control Panel, but it seems only Microsoft programs are listed there.
    Thanks!
    Dan

    According to Apple support, you cannot remove the phone on the device list under "find my iphone" until you turn it off and it goes offline.  (It also says the device will go back on "find my iphone" when it goes online again, which seems to mean you can successfully remove it, but as soon as you turn it back on it will be back on the list, and thus you will not be able to restore it.)  It's a bit of a conundrum.  In my case I couldn't for some reason turn off my phone  with the home/sleep buttons - nothing happens, the phone stays on.  While on a chat with Apple support, they got my iphone offline (I was able to turn it off by pressing the sleep button and swiping where the red "turn off iphone" arrow would have appeared) and removed it from "find my phone", but when I reconnected to itunes it turned on and reappeared in the "find my phone" list.  Luckily, the screen suddenly appeared (it had done this several times yesterday, just briefly), so I was able to turn off "find my device" from the phone.  I was then able to restore.  Unfortunately, this does not answer the question of how to remove the device from "find my iphone" and keep it off while connecting with itunes to restore (unless you have my good fortune of having the screen suddently reappear).  Apple support seemed puzzled that it had reappeared on the device list under "find my iphone".  Time will tell whether the restoration fixes the blank screen issue.

  • How to turn off the welcome screen when I start Illustrator

    Can it be done. I know in earlier version it was under preferences, general. Don't see it in CC.
    Thanks!!

    cghelton,
    I believe this is your rescue:
    Re: How can I turn off the Illustrator CC 2014 hello screen permanently?

  • How to turn off sound Ipaq mini when charging

    I still kepp My Ipaq mini on , then I turn off screen only. Plugin charge . But later , It make noisy short sound , and repeat all time un till i disconect charge  . Even I Power off , I paq automatic on again and sounding while charging . I don;t want to minimum sound from setting. But I want to disable that sound . Someone help?

    I have to agree this is the most annoying thing about the iPhone.  The chirp when it charges.  I had a situation the other night where my phone was on analog roam (uses a lot of power) and ever couple of minutes it would chirp (assume it was because it found a network, charged, and then went analog and discharged and the cycle repeated!!).
    The phone was next to my bed since I use it as an alarm clock.  Basically using the mute switch toatally makes the iPhone usesless as an alarm clock which is why it was next to my bed!  Apple seriously needs to fix this issue.
    Dear Apple, please make the battery notification sound user selectable.  Thanks.

  • How to turn off Verizon browser tabs when launching Firefox???

    Hey all, when i launch Firefox 2 addtional, seperate Verizon browser tabs open beside the Firefox one at the top of the screen.
    Can't figure out how to stop them from opening?? Can anyone help?
    Thanks.

    If you click on those tabs, what displays?

  • How to turn off iTunes auto-start when iPhone connected?

    The option "Open iTunes when this iPhone is connected" is disabled (grayed out) in iTunes 10. The grayed-out check box is unchecked, yet iTunes starts every time I plug in my iPhone 3G. I would like to be able to plug in my phone without iTunes starting. Is there a way?

    Right. Un-checking the preference to prevent auto-sync re-enabled the auto-start option. Then I was able to check and un-check the auto-start option and re-check the prevent auto-sync preference. Now all seems well. Despite appearances (the un-checked option), the internal setting was in the wrong state and twiddling it seems to have set things right.
    What a boneheaded user interface, where items on widely separated parts of the UI affect each other invisibly.

  • How to turn off the warning message when re-compiling jsp in embedded OC4J?

    Members,
    I would like to remove the annoying warning messages whenever we re-compile a jsp file using embedded OC4J.
    Steps:
    1. create an web project
    2. create a test jsp file (say, test.jsp)
    3. run the jsp file.
    4. on the jsp visual editor, modify the jsp file.
    5. go to the browser, reload the page. the following warning messages are displayed:
    06/03/03 08:09:13 Warning: directory C:\Projects\TestAgain\UserInterface\public_html\WEB-INF\classes doesn't exist on classpath
    06/03/03 08:09:14 C:\Projects\TestAgain\UserInterface\classes\.jsps\_test.java:31: warning #556: variable session assigned to but never used
    06/03/03 08:09:14 HttpSession session = pageContext.getSession();
    06/03/03 08:09:14 ^
    06/03/03 08:09:14 C:\Projects\TestAgain\UserInterface\classes\.jsps\_test.java:32: warning #559: variable __jsp_tag_starteval declared but never used
    06/03/03 08:09:14 int __jsp_tag_starteval;
    06/03/03 08:09:14 ^
    06/03/03 08:09:14 C:\Projects\TestAgain\UserInterface\classes\.jsps\_test.java:33: warning #556: variable application assigned to but never used
    06/03/03 08:09:14 ServletContext application = pageContext.getServletContext();
    06/03/03 08:09:14 ^
    06/03/03 08:09:14 C:\Projects\TestAgain\UserInterface\classes\.jsps\_test.java:35: warning #556: variable page assigned to but never used
    06/03/03 08:09:14 _test page = this;
    06/03/03 08:09:14 ^
    06/03/03 08:09:14 C:\Projects\TestAgain\UserInterface\classes\.jsps\_test.java:36: warning #556: variable config assigned to but never used
    06/03/03 08:09:14 ServletConfig config = pageContext.getServletConfig();
    06/03/03 08:09:14 ^
    06/03/03 08:09:14 C:\Projects\TestAgain\UserInterface\classes\.jsps\_test.java:37: warning #556: variable __ojsp_varRes assigned to but never used
    06/03/03 08:09:14 javax.servlet.jsp.el.VariableResolver __ojsp_varRes = (VariableResolver)new OracleVariableResolverImpl(pageContext);
    06/03/03 08:09:14
    I'm so much glad to see JDeveloper giving out all the details and warnings, but sometimes they spit out too much warning messages that simply annoys and distracts my programming.
    There seems to be no parameters for me to shut those up, maybe I should do it manually?
    thanks.

    Ronald,
    I've already tried setting up the j2ee-config.xml file, but
    it seems that the warning message does not come from the oc4j, but is generated when jsp file is being compiled, so no matter what you do with the j2ee-config.xml, it would not work to remove the warnings.
    I was thinking maybe I could setup the java compiler option found in server.xml, by adding -nowarn option in javac options attribute, but it seems that the file server.xml gets overwritten automatically whenever the oc4j restarts (so, no avail).
    So... any other ideas?

  • How to turn off buffering of stdout when redirecting to a file

    I have a Bourne Shell script wrapped around an ldapmodify step. I desire to redirect both stdout and stderr from the console to a common file. Unfortuately, Unix will start buffering stdout when it is written to a file. This results in all error messages (which are sent to unbuffered stderr) to appear before all the stdout messages.
    It is not very useful to see errors (e.g., constraint violation) appear out of context to the actual ldif statements being processed.

    Issue is resolved. Using the -e (i.e., error file) option of the ldapmodify binary will result in a meaningful error along with offending ldif entry being written to the error file.
    BTW - I've come to the conclusion that from within a shell script you cannot override the "block buffering" of STDOUT when redirecting it to a file.

  • How to turn off Voice tags in Nokia 5310 when conn...

    Now i've got my new Nokia 5310 xpress music,
    Does anyone know how to turn off the voice tags when connected to a bluetooth headset?
    I've problem when put bluetooth in my pocket and not intend to push the button so the phone will dial to anyone that I won't to talk to.

    lock the keypad on the phone and make sure automatic lock of the keypad is working, this should do the trick, pressing and holding the button on the bluetooth headset will prompt for the voice tag of course

  • How to turn off screen rotation on itouch 5

    I just upgraded to a 32 bit iTouch 5 and was wanting to know how to turn off the screen rotation when I'm playing music. I have the shake to shuffle off (great feature!) but would like to turn off the screen rotation. I just find that to be annoying (to me anyway)...how do I do this on the 5?

    Pull up the Control Center and lock the screen rotation. Tap the arrowed-circled padlock on the right side to toggle
    If the screen doesn't rotate on your iPhone, iPad, or iPod touch - Apple Support

  • I turned off my phone and when I turned it back on, all my apps were deleted. I tried to reinstall my apps, but it wouldn't let me. My storage still remained the same even though, all my apps were deleted. How can I get my apps back?

    I turned off my phone and when I turned it back on, all my apps were deleted. I tried to reinstall my apps, but it wouldn't let me. My storage still remained the same even though, all my apps were deleted. How can I get my apps back?

    Hold the home and power button down until your phone restarts. If that doesn't work, backup and restore using iTunes.

  • Is there a need to turn off my Apple TV when I'm using it? If so, how do I turn it off?

    Is there a need to turn off my Apple TV when I'm not using it? If so, how do I turn it off?

    Kappy,
    I know you said that my Apple TV shuts itself off after about an hours idle time but mine only shuts itself off radomly maybe one every two days even when the TV has been off and the iMack has been off over night. My wife and I both have iPhones and she has an iPad which may be causing the Apple to stay on. Don't know. Incidentally, my Apple TV  shows my iMack iPhoto pictures and albums great. Still a little concerned that it doesn't shut off after some idle time.

Maybe you are looking for