How to turn off default attribute "Validity" in a web-report

Hi Experts,
We are using 0ORGUNIT with time-dependent hierarchy. This hierarchy is included in most of our reports. When we run a report with 0ORGUNIT hierarchy an attribute "Validity" is always shown next to the hierarchy. We can manually remove this every time it is shown, but is there a standard way to suppress the "Validity" attribute?
Note that in the back-end (RSA1) the InfoObject 0ORGUNIT does not have any (visible) attribute called "Validity". This attribute is only available in the attributes list of 0ORGUNIT at the time the report is generated.
Your help is highly appreciated.
Kind regards,
H. Bui

Save is "Command ("Apple Key")-S" not "Control-S". Are you sure you are not using that "other" OS?

Similar Messages

How to turn OFF Organize by Conversation in all mailboxes at once and set it as default?

The Apple Mail Organize by Conversation is not working properly on Mail 6.5 on Mac with OS X 10.8.4 (Mountain Lion).
How to turn off such Organize by Conversation in all mailboxes of at once and leave it off as default for past and new messages?

It works doing it with one mailbox at a time, selecting it and then deselecting "View - Organize by Conversation". A real pain and clealry impractical when you have thousands of mailboxes...
It does not work at all deselecting even all items in "Mail - Preferences - Viewing - View Conversations". After that, all the imported mailboxes have the Organize Conversation active.
Anyone knows how to overcome this? Thanks.

HT4972 When I Copy & Paste, what results in the Paste is NOT what I copied. With enough shaking, eventually a box appears saying "Undo Change attributes", which fixes it. HOW do I turn off "Change attributes" in iOS 5.1?

When I Copy & Paste, what results in the Paste is NOT what I copied. With enough shaking, eventually a box appears saying "Undo Change attributes", which fixes it. HOW do I turn off "Change attributes" in iOS 5.1?

Did you ever figure out which output worked the best? I have the same original footage; trying to determine the best output settings to make a dvd for tv.
thanks!

In Elements 13, how do I turn off default setting that sends my usage info to Adobe?

In Elements 13, how do I turn off default setting that sends my usage info to Adobe?
Vendors of proprietary software want to track everything you do. Adobe says that it is possible to turn off sending info to them, but doesn't include any info on how to do it.

Go to the main page of adobe.com and sign in if you aren't already signed in, then click Manage Account>Sign In again>Security & Privacy>Desktop App Usage Information.

'save in subfolder' - how to turn off by default ?

'save in subfolder' - how to turn off by default ?
Thank you for any help with this,
TB

It is really annoying when settings/features are added that just assume a specific work process - without an option to turn them off (or complicated work arounds). And even more annoying when I am asked to submit a feature request after adobe randomly changes things.
This was not a random change. The ability to render image sequences into a sub-folder was a feature request that we have received many many times over the years. Many After Effects users, myself included, sometimes forget to manually create a folder for an image sequence with the result of hundreds or thousands of files exploding into the renders folder or your desktop or wherever the render was saved to.
We answered not only this common feature request but extended the functionality to all formats by the following:
Adding the Save in Subfolder control to create a folder for any output module
Adding support for creating and using folder paths in output file name templates (which naturally interacts with the Save in Subfolder control)
Adding a new output file name template that creates a folder, which is used by default for image sequences
All of these additions were vetted by actual After Effects users before we released the After Effects CC (12.2) update.
not sure why defaults have to be changed.
Perhaps I didn't answer your original question directly: there is not a simple option to stop Save in Subfolder from being enabled when you choose an image sequence format. This would be an additional control on top of the rest of this new functionality. It's not something we thought was necessary as part of the original design of these changes, but we could be convinced to add it in the future. So if you (or anyone else) would like to see this added, please submit a feature request.
The reason why you can get the result you want by changing default output file name template is because that is how the logic works in After Effects. Choosing an image sequence format triggers the use of the Comp Folder and Name template. Changing what that template contains will apply your new rules instead.
Regardless of the template, you can always change the output file path on a case-by-case basis by simply unchecking Save in Subfolder or by choosing a different output file name template.

How to turn off categorization for case management

Hopefully a simple one, how to turn off categorization for case management.
I get this error in CRM 5.0 when choosing Cases.
CASE_MANAGEMENT, CASE_TYPE, Z_01
My categorization in the IC profile is set to ZDEFAULT (copy of default) but only contains
IR     Interaction Record
SO     Service Order
ST     Service Ticket
Does not have the CA case entry that is in DEFAULT.
Z_01 is my case type but I see no place to set the categorization.
I think I am missing something easy but don't see it.

I'm guessing zdefault had same description default and it was picking up the default one in error.

How to turn off automatic variable code suggest for a single page?

Does anyone know how to turn off the code assist feature where CFBuilder tries to assist you by listing all the variables on the page? I have a CFC with over 3000 lines and it causes CFBuilder to hang/freeze like you wouldn't believe. I'd like to turn off this feature for large files (or at least see if I can tune the feature to be smarter about what variables it suggests).
Does anyone know how to disable this feature on a specific template or turn this feature off altogether? Note: I do want to keep the tag attribute suggestion if possible.

Update: I tried using CFBuilder as a plugin for Eclipse (64 bit) and then followed the steps here: CFBuilder 2 Performance Problems on Windows 7 64-bit Solved » websolete.
So far I have experienced noticeably faster response times. However, the program still hangs when trying to suggest variable names. It would be great if there was a way just to disable that feature until Adobe fixes it.

How complitely turn off computer?

How complitely turn off computer?

Are you talking about where it shuts itself down after going through the shutdown routine? If it's not doing it automatically when you issue a "shutdown -r now" (or the like) then it's probably an issue with power management. There's a few ways to tackle that. Either use APM or ACPI. ACPI tends not to work all that great on computers that have really old bios. In that case it's better to utilize APM. Probably your issue is that the your system may not support ACPI very well or even at all. However, it may support it, but the kernel is turning it off by default from detecting your BIOS being dated beyond a certain point in time. They did that to error on the side of caution. They opted to choose a conservative default assumption since it makes more sense in that at least most systems will be able to boot up without any problems by default.
My computer used to be able to shutdown automatically through the use of APM, but not ACPI (ran into this issue when I upgraded my kernel from 2.4 series to 2.6 series back when I ran with Debian), but I ended updating it's BIOS and it worked fine with ACPI from there on. My system is pretty old too, so it doesn't completely implement ACPI. I think it's laptops that tend to make fuller use of ACPI anyway. However, it seems like most desktops with the last 8 or so years make some minimal use of it at least. So you can see there is many ways to approach this issue.
First thing to try is to look around in your BIOS setup to see if there is any ACPI related setting, like mentioned earlier. That's a good place to start. If you don't see any settings, it either means that your BIOS setup either don't allow you to set ACPI, doesn't support it, or just the current version of your BIOS doesn't allow changing related settings or make use of it. So naturally, the next thing to check is the manufacturer's sight for your motherboard and find any BIOS related info.
Upgrading the BIOS is probably the most elegent solution but it can be openning up a whole can worms if you don't know what you're doing. If you botch flashing the BIOS you run the risk of turning your motherboard into a paper weight. So the key there is make sure you at least read your manufacturer's instructions carefully and also make sure that your use the right utils and BIOS version for your BIOS and motherboard. And don't dare have a power failure or shut the system off while it's rewriting the boot block. That where people run into a serious problem of rendering their system completely unbootable since the system no longer has the most basic of code needed to even get the system to a state that it can even begin bootstrapping. Technically, the motherboard isn't probably trashed, but at that point you have a chicken before the egg syndrome going on. You can't get it to boot far enough to boot to anything, much less a floppy, to be able to reflash the bios to get yourself out of the pickle. So when, and if that sort of thing happens, then it would require replacing the BIOS chip itself which may or may not require soldering.
Anyway, don't let that scare you, it's just to point out that when you're doing things like flashing a system's BIOS it's critical to do it right since it's modifying the system on such a fundimental low-level. If that part of the system isn't functional, everything else, like HD and floppy being able to load anything, is a moot point.
If all of that stuff makes you uncomfortable, you may opt to utilize APM instead. I can't remember exactly how to instruct the kernel to use APM instead of ACPI. I believe there is kernel parameter you can set in your bootloader's settings. I can't remember it off hand. Sorry.

How absolutely turn off computer if I use lilo boot loader?

How absolutely turn off computer if I use lilo boot loader?
With this /etc/lilo.conf content computer not absolutely turn off:
# /etc/lilo.conf
boot=/dev/hda
# This line often fixes L40 errors on bootup
# disk=/dev/hda bios=0x80
default=arch
timeout=0
lba32
prompt
image=/boot/vmlinuz26 append="apm=power-off"
label=arch
root=/dev/hda1
initrd=/boot/initrd26.img
read-only

Please provide some system specs so that we may give better advice. As phrakture has already said, you must have hardware that supports power management before auto shutdown works.

How to turn off geolocation on BB Playbook?

Hi,
Please, can anyone tell me how to turn off geolocation on BB Playbook?
It looks like it's on by default since the last OS update. But I may be wrong.
I read on this forum you can't turn off the GPS sensor.
That's OK as long as I can disable it's geolocation function on the Play Book.
Thank you, Walt.

It's defined on a per application level, not system level. See Security/Application permissions in system settings...

Yoga 2 Pro -- how to turn off switching mode notifications -- e.g. "tent mode", "tablet mode", etc?

Does anyone know how to turn off the notifications that pop up in the upper right corner telling you that you have just changed from one configuration to another -- e.g. changing from tent mode to tablet mode?
Solved!
Go to Solution.

Just disable it -
Task manager > Startup > Click "Yoga Picks" > Click "disable"
Next time you start your computer no more annoying pop ups. If you want to be annoyed again you can always re-enable it.

I simply want to know how to turn off iCloud* without losing my contacts

Call me old fashioned, but I really do NOT want to use iCloud EXCEPT for ONE THING*: and that's to find my phone, ipad or laptop if it goes missing.
Having said that, I have figured out how to turn off icloud on my ipad and my iphone (I am not using the phone as a phone, just as a glorified ipod) while keeping the "find my ipad/iphone" function active, BUT
I can't quite figure out how to do it on my laptop.
I seem to have done it already for photos, and for the calendar, (I know this from checking iCloud to see what it's got) but just cannot figure out how to turn it off for contacts.
And YES, I've backed up all of those things at LEAST 3 different ways, I just don't want the Cloud to be one of them.
So can anyone tell me how to turn off contacts in the cloud without it also magically deleting them in my laptop? (I had it happen on the ipad, that's why I'm worried.)
Thank you for understanding-I'm older and this stuff just keeps getting more complicated and I'm a simple person. I'll back up my own stuff!

If you are refering to documents such as Pages and Numbers files....
The only way around this is to "save as" you icloud documents using the associated app to a local folder on your mac. Then turn off icloud.
Of course, when you sign off of icloud, the docs are removed from the mac, but remain in icloud. In the future when you sign back in, the documents are available to you again.
Oh, and the icloud documents are also stored locally in ...
~/Library/Mobile Documents
Note that Library in the user's home folder is now hidden, so you'll have to set Finder to view hidden files.
The Mobile Documents folder has subfolder where copies of the doc/data files are stored.
You can move these files to another folder to save them.

I'm using same icloud and same apple ID on two iphones. Now i get calls from same number on both iphones at the same time. How to turn off that?

I'm using same icloud and same apple ID on two iphones. Now i get calls from same number on both iphones at the same time. How to turn off that?

Apple ID's are not device specific, so when you changed it on the iPad 2 it changed it on the iPhone 4 as well, since it's the same account still. What you need to do is create a second Apple ID (so you'll have two accounts, one for iPhone 4 and a seperate one for iPad 2).
To create a new Apple ID on your iPad 2:
1) Go into Settings > Store.
2) If you are already signed in, tap your Apple ID on the screen and you will be given a few options, one of which is to sign out of your account.
3) After you sign out, now click the "Sign in" button.
4) Tap "Create New Apple ID" and follow the instructions on-screen.

HT4314 Does anyone know how to turn off the pics of your Game Center friends showing on the right side of the screen while playing a game?

Does anybody know how to turn off the pics of your Game Center friends that show while you're playing a game?

Swamava,
Thank you for the link you provided and I am glad I am not the only one with this problem, however beforeI install Adblock is it a free program or is there a fee you
must pay to download the program? I am some what hesitant to be oblighted to
a monthly or yearly bill.
i

How to turn off pop-up blocker

How to turn off pop-up blocker?

Are you speaking of the one in the Firefox browser or Firefox OS?
* Desktop Browser: [[Pop-up blocker settings, exceptions and troubleshooting]]

How to turn off default attribute "Validity" in a web-report

Similar Messages

Maybe you are looking for