How to turn off Manual Feed envelope prompt on printer scrn LaserJet Pro 200 Color MFP M276?

Somehow, in trying to figure out how to get an envelope to print from the feeder tray (which I found out isn't possible), I turned on something that produces a printer screen prompt that says something like 'Manual Feed" then says the size of envelope and waits for response.  This is every time I print an envelope & it's really a pain and I'm not finding where/how to turn this off.  Can anyone help?  Thanks in advance.

Hello miebs, and welcome to the HP Forums, I hope you enjoy your experience!
I see you are having envelope issues. I would love to try and help you, but I do need a little information first. I am linking a few HP Support documents below that will show you how to find which operating system you are using. Also, if you're using Windows, please include whether your operating system is 32-bit or 64-bit. With this information we can provide you with accurate information.
Mac OS X: How Do I Find Which Mac OS X Version Is on My Computer?
Which Windows operating system am I running?
Is the Windows Version on My Computer 32-bit or 64-bit?
Also, What programs are you printing from?  Does it occur from multiple programs?
Please let me know what you find.  Thanks for posting on the HP Forums!
Please click “Accept as Solution " if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks" for helping!
Jamieson
I work on behalf of HP
"Remember, I'm pulling for you, we're all in this together!" - Red Green.

Similar Messages

  • Manual duplex HP LaserJet Pro 200 color MFP M276

    I have a HP LaserJet Pro 200 color MFP M276 and my manual duplex is not duplexing properly.
    There are no error messages just me grumbling at the final output.
    I am using Windows 8.1 Pro and no new hard or software changes.
    Here is what happens:
    I am attempting to print 5 pages with the manual duplex option checked
    3 pages come out (pages 1,3, & 5) and a pop up window says to reinstall the pages and hit ok.
    I reinstall the pages (not adulterating the page order) Just take them off the printer and put in the tray face down with the top of paper toward the back of the printer.
    What comes out is page 2 on the back of page 5 instead of being on page 1; page 4 is on the back of page 3 and page 1 is blank.
    Why doesn't it know how to reverse print the odd page numbers so page 2 will end up on page the back of page 1 etc?
    I tried it with a 3 page document and page 2 ended up on the back of page 3 instead of page 1. Page 1 came out blank.

    Hello, I understand that you are having an issue with printing in manual mode.  When printing documents in manual duplex, the best method is to select manual duplex in the printer driver and not through the application.  There is a public document that might help, which can be found at the HP product/support page.  When the page is availalbe search on this public document id number for instructions-c02851622.   Please reply if this does or does not help. 
    Norm
    (Although I am employed by HP, I am speaking for myself and not for HP)

  • Broken document feeder on LaserJet Pro 200 Color MFP M276

    I love this LaserJet Pro 200 Color MFP M276 printer. A few weeks ago, it fell onto the floor from a low platform. The top part with the automatic document feeder became completely separated from the rest of the unit. A few small pieces of plastic that hold it upright broke off. I have saved those pieces.
    The printer still works perfectly as a printer and scanner. However, the automatic document feeder does not work at all now. I know there is some sort of wire that connects it to the main body of the printer so that it has power. But, I don't know how to re-connect that wire so that the automatic document feeder will work again.
    Please help with this. I hope the repair is simple and inexpensive. Thank you.
    Doug

    Hi @DougSF ,
    I see that a part is broken for the ADF. I can help you with this.
    Please call our technical support to inquire about a repair or a replacement printer, at 800-474-6836. If you live outside the US/Canada Region, please click the link below to get the support number for your region.
    Contact HP.
    Have a great day!
    Thank You.
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
    Gemini02
    I work on behalf of HP

  • How to Print Envelopes - HP LaserJet Pro 200 color MFP

    I can't work out how to print envelopes on my HP LaserJet Pro 200 color MFP.  
    I put the envelope upright (flap down) in the adjustable tray at the very top of the machine (as I have done in almost every printer I've used) and it prints the address on a sheet of paper!  

    Hi goodgrandma ,
    I see by your post that you would also like to know how to print envelopes.
    I will be happy to help you.
    Both the Laserjet m251 and M276 have a main tray only.
    Above the tray is the jam access door to remove paper jams.
    To print on the envelopes, you would need to remove all the paper from the main tray and load the envelopes in the main (bottom) tray, to print to envelopes with these two units.
    If you are using Word Application, click on Tools, select Letters and Mailing/Envelopes and labels, the envelope box will open, in the envelope tab enter your address, click on Options, click the Printing Options tab, you will need to change the Feed from to Auto, it is likely set to Manual.
    What is the full name and product
    number of your printer? How Do I Find My Model Number or Product Number?
    Hope this helps.
    Thank you for posting on the HP Forums.
    Have a great day!
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
    Gemini02
    I work on behalf of HP

  • LaserJet Pro 200 color MFP M276nw/ a code 79 service error turn off then on, on screen the product

    I have an HP LaserJet Pro 200 color MFP M276nw. I keep getting a code 79 service error turn off then on, on screen the product

    I have same problem - this doesn't help. Did you did something that worked?

  • How do I select two-sided printing on LaserJet Pro 200 Color?

    How can I print documents with two-sided printing with LaserJet Pro 200 color printer. I have Mac )S X 10.10 Yosemite.

    Hi @jleo ,
    I see that you would like to know how to select the two-sided printing. I would be happy to help you, but I will need some more information.
    What is the full name and product number of your printer? How Do I Find My Model Number or Product Number?
    Are you using the Full Feature HP Software and Drivers or the Apple Update drivers?
    How is the printer connected? (USB/Ethernet/Wireless)
    Depending which printer you have and what drivers you are using, usually from the application you are printing from, go to File, Print, click on the Layout in the dropdown and you might have one also listed for Manual Duplex option, you should be able to select the two-sided setting there.
    Have a nice day!
    Thank You.
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
    Gemini02
    I work on behalf of HP

  • How to lock the Printer of LaserJet Pro 500 Color MFP m570dw

    how to lock the Printer of LaserJet Pro 500 Color MFP m570dw

    You can set a control panel lock security level and password for your HP LaserJet series printer. To lock your printer, follow below link:
    http://h20564.www2.hp.com/hpsc/doc/public/display?​docId=emr_na-bpl03612

  • LaserJet Pro 200 Color M251nw : Wifi turned off but still broadcasting

    Hello there,
    First of all, forgive my English.
    I have a HP LaserJet Pro 200 color M251nw, so it has wifi capability. Since the printer is plugged with an ethernet cable to my router, I don't feel the need to use the wifi embedded in the printer.
    Thing is, when if I turn off the wifi on the printer, and even if I disable "wifi direct printing", I can still see the SSID of the printer on my home devices (HP-Print-a6-LaserJet 200 color).
    I have looked on the forum and tried the "factory reset" by turning on, unplug both printer and wall socket, wait for 15 seconds... etc. It didn't work. I have also already installed the latest firmware.
    Any help would be greatly appreciated! :-)
    This question was solved.
    View Solution.

    Hello revlib,
    Welcome to the HP Support Forums!
    Turning off the Wireless Direct on the LaserJet Pro 200 color M251nw should have disabled the SSID from broadcasting. Since disabling from the front display did not resolve, let us try from the Embedded Web Server (EWS).
    To access the EWS you need to enter the I.P address for the M251nw into the address bar of your web browser. The I.P address can be collected by touching Setup ()> Reports> Network Summary.
    Once in the EWS, click Network> Wireless Direct Setup> select Off and Apply.
    Let me know if this has help
    JERENDS
    I work on behalf of HP
    Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

  • Squeaking when my HP LaserJet Pro 400 color MFP M475 feeds from Tray 1

    There is a low pitched squeaking when my HP LaserJet Pro 400 color MFP M475 feeds from Tray 1. We use this tray for printing individual envelopes. Is there a part that I should replace or clean? Trays 1 & 3 feed with no noise.

    Noise issues are difficult to troubleshoot remotely and they could easily misguide even when we are close to the device.
    Please do confirm if the noise is a grinding noise or squeky/humming noise.
    As you have mentioned that it happens only while calibrating, hence I would suggest you to re-check & validate your toner cartridges.  One of the toner cartrdige may be defective and causing this issue.
    If not the toner cartridge then it would be one of the printer hardware component which is in question, hence an HP tech. might need to perform physical inspection of the device and the error condition.
    Please mark the post that solves your problem as Accepted Solution
    Click the 'Kudos Thumbs Up' if this was helpful. Thank You!
    (Although I am an HP employee, I am speaking for myself and not for HP)

  • Hp laserjet pro 400 color MFP model m475dw repair manual

    While trying to copy some documents, display shows the following errors:
    1.-  Service error 49.  I'd review on a downloaded owner manual what to do and no more messages. After I restarted the printer shows the following error.
    2.- Service error 79. I'd followed the the owners manual once again and the problem was solved, then I discovered that the upper paper tray send the message to remove clogged paper, I'd removed the paper and then when I try to make a copy the printer showed me on display the scanner number 6 error.
    I want to check the upper tray assy to avoid broken parts cause the tray stared to do a rattling sound...
    what should I do?. 

    Hello Ajton,
    To get your issue more exposure I would suggest posting it in the commercial forums since the HP LaserJet Pro 400 color MFP M475dw is a commercial product. You can do this at HP Enterprise Business Community.
    The support page for your product may be helpful in the meantime:
    HP Support Center.
    I hope this helps!
    RnRMusicMan
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" to say “Thanks” for helping!

  • Can the LaserJet Pro 100 Color MFP M175nw print envelops in c5??

    Can the LaserJet Pro 100 Color MFP M175nw  print envelops in c5??
    Thank you

    Hi,
    Which application are you using ? Under Word, you can check it yourself using Print Envelopes as shown:
    Regards.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • How do I set up the HP web services on my laser Jet Pro 200 color MFP 276nw?

    I am trying to be able to print on my Laser Jet Pro 200 color MFP 276nw printer from my Galaxy Note 10.1 and am instructed to set up HP web services.  I need some help to know how to do this.

    Hi,
    Please try a print app such as HP ePint on your Galaxy:
        http://www.hp.com/united-states/campaigns/mobility/
    Regards.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • I have an hp laserjet pro 100 color mfp m175. how to i get the printer online?

    Product name: LaserJet Pro 100
    OS: Windows 7
    My printer will not print.  Windows says the printer is not online.  I have checked cables and tried rebooting my computer.  Also turned printer off and turned it back on.  My print jobs are stuck in the print que.

    Hi Stickdude,
    Follow the steps in the document at the link.
    http://h10025.www1.hp.com/ewfrf/wc/document?docnam​e=c02241610&tmp_task=solveCategory&cc=us&dlc=en&la​...
    I am an HP employee.
    Say Thanks by clicking the Kudos Star in the post that helped you.
    Please mark the post that solves your problem as "Accepted Solution"

  • LaserJet Pro 300 color MFP automatic document feeder - page stops feeding with 1" to go

    Scan page won't finish feeding when using the automatic document feeder.  Leaves approximately the last 1 to 2 inches of paper in the scanner. The Scan ADF Paper Jam error message pops up.  Seems like the page hangs/gets stuck  once the page passes through the document feeder roller assembly.  Haven't been able to find any information on what moves the paper through the scanner once it gets past this roller assembly. 

    @Debbie-M 
    ‎Thank you for using HP Support Forum. I have brought your issue to the appropriate team within HP. They will likely request information from you in order to look up your case details or product serial number. Please look for a private message from an identified HP contact. Additionally, keep in mind not to publicly post ( serial numbers and case details).
    If you are unfamiliar with the Forum's private messaging please click here to learn more.
    Thank you,
    Omar
    I Work for HP

  • LaserJet Pro 400 color MFP scanner: Ripped paper stuck in scan feeder, cannot dislodge

    A piece of paper became stuck in the automatic scan feeder.  I tried my best to slowly guide it out, but the paper ripped and now I cannot dislodge the ripped piece of paper.  The pieces are held so tightly together that they do not allow for opening up.  I have tried tweezers unsuccessfully.  I have also disconnected the spring and tried to unscrew the bolted down affixed pieces, but my screwdriver just spins aimlessly and does not make progress on the bolts.  Help!

    Hello there,
    To get your issue more exposure, I would suggest posting it in the commercial forums since your product is a commercial product. You can do this at Commercial Forums - Printers - LaserJet.
    Enjoy your day!
    R a i n b o w 7000I work on behalf of HP
    Click the “Kudos Thumbs Up" at the bottom of this post to say
    “Thanks” for helping!
    Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

Maybe you are looking for

  • Manipulate the URL in HTTP receiver adapter possible?

    hello together, i have an HTTP receiver adapter. To the parameters which i can tick in XI as default (sender  party, sender service, ....) i want to add some parameters too. who can i do that? i have read the weblog from william li. i tried to change

  • App Fails Moving from Development to Prod for Identical Environments

    All, I know everyone says* this but, we really need resolution to this problem ASAP. We are in a situation wherein APEX Applications are thoroughly QAed and then, only after being delivered to Production, the same JavaScript calls that succeeded in D

  • My Magic Mouse will work side to side but not scroll

    I have a magic mouse it will not scroll up and down. I can scroll left to right though.

  • 2 BIZ questions: ODPs and PayPal vs GooglePay??

    Hey folks, I'm producing a series of posters for a client who wants to use an ODP for printing and sell them on her website. I've only used one ODP on a client's request. Their work was OK, but they weren't particularly pleasant to deal with. Do you

  • Cannot insert value with : into BLOB field

    I am using Oracle 10g Express Edition. Attempting to run this insert from the SQL Commands page: INSERT INTO table1 (col1, col2) VALUES ('one', '\"2.001:2372.002:002.005:Y2.018:G') Table1 info: col1 = VARCHAR2(25) col2 = BLOB After I click Run an Ent