How to turn off PNG Images

How to turn off PNG Images?

PNG is a format for (compressed) images just like the JPG format. There is no way to disable this format.
If you have a problem with images on some web pages then you may need to block images from some domains.
You can look at the Adblock Plus extension to block specific content.
* Adblock Plus: https://addons.mozilla.org/firefox/addon/adblock-plus/
You need to subscribe to a Filter list (e.g. the EasyList).
* http://adblockplus.org/en/subscriptions
* http://adblockplus.org/en/getting_started

Similar Messages

  • How to turn off [Scaled] images in photoshop

    I found this solution once before, but for the life of me can't now.  In photoshop, while editing, my images are of the correct resolution.  But when I save them they are squeezed on the left and right.  I know this is because the "scaled" feature is enabled in photoshop.  How do you turn this off?
    se

    This is just a guess but since you are editing a YouTube video frame, the pixels are not square and PS has automatically set a non-square viewing mode.  This is useful if the frame you are editing will be going back into the video, but not useful if you want to save it as a still image.
    There are several Pixel Aspect Ratio options on the View menu.
    Here is someone with the same question in 2005:
    http://forums.adobe.com/message/6257869#6257869

  • How can I turn off the images of avatars that post...

    how can I turn off the images of avatars that post in this forum? they are annoying.

    I think the avatar pictures help a lot to visually tell apart the different users participating. Pictures are way quicker to discern than user names are.
    Do you want them removed because they distract you or you find certain ones disturbing (You can easily flag those to the moderation team)?
    Follow the latest Skype Community News
    ↓ Did my reply answer your question? Accept it as a solution to help others, Thanks. ↓

  • How to turn off all the layers in one go?

    How to turn off all the layers in one go?
    In case the pdf file contains layers, then how to turn them all off in one go?
    Thank you for the help,
    Best
    Jamal

    able,
    What happens if you select both the grunge and the image and in the Transparency flyout tick Make Opacity Mask? You may try different ticking/unticking and colours.

  • 'save in subfolder' - how to turn off by default ?

    'save in subfolder' - how to turn off by default ?
    Thank you for any help with this,
    TB

    It is really annoying when settings/features are added that just assume a specific work process - without an option to turn them off (or complicated work arounds).  And even more annoying when I am asked to submit a feature request after adobe randomly changes things.
    This was not a random change. The ability to render image sequences into a sub-folder was a feature request that we have received many many times over the years. Many After Effects users, myself included, sometimes forget to manually create a folder for an image sequence with the result of hundreds or thousands of files exploding into the renders folder or your desktop or wherever the render was saved to.
    We answered not only this common feature request but extended the functionality to all formats by the following:
    Adding the Save in Subfolder control to create a folder for any output module
    Adding support for creating and using folder paths in output file name templates (which naturally interacts with the Save in Subfolder control)
    Adding a new output file name template that creates a folder, which is used by default for image sequences
    All of these additions were vetted by actual After Effects users before we released the After Effects CC (12.2) update.
    not sure why defaults have to be changed.
    Perhaps I didn't answer your original question directly: there is not a simple option to stop Save in Subfolder from being enabled when you choose an image sequence format. This would be an additional control on top of the rest of this new functionality. It's not something we thought was necessary as part of the original design of these changes, but we could be convinced to add it in the future. So if you (or anyone else) would like to see this added, please submit a feature request.
    The reason why you can get the result you want by changing default output file name template is because that is how the logic works in After Effects. Choosing an image sequence format triggers the use of the Comp Folder and Name template. Changing what that template contains will apply your new rules instead.
    Regardless of the template, you can always change the output file path on a case-by-case basis by simply unchecking Save in Subfolder or by choosing a different output file name template.

  • How to Turn Off anti-aliasing in JavaFX?

    How to Turn Off anti-aliasing in JavaFX? Is that possible at all?

    If you find that doesn't work as well as you want, perhaps the easiest thing is to select the object (Select>All), Edit>Copy, File>New>Image from Clipboard.
    Then follow MichelBParis's instructions, then either copy and paste back to the original or drag to the original.
    If that is your only layer then using the Image Size is the best way.

  • NOT SURE HOW TO TURN OFF RESTRICTIONS AS i DO NOT HAVE A PASSCODE

    not sure how to turn off restrictions

    Are restrictions enabled? If they are and you don't know the restrictions passcode:
    If You Are Locked Out Or Have Forgotten Your Passcode
    iTunes 10 for Mac- Update and restore software on iPod, iPhone, or iPad
    iPhone, iPad, iPod touch: Wrong passcode results in red disabled screen
    iOS- Understanding passcodes
         If you have forgotten your Restrictions code, then follow the instructions
         below but DO NOT restore any previous backup. If you do then you will
         simply be restoring the old Restrictions code you have forgotten. This
         same warning applies if you need to restore a clean system.
    A Complete Guide to Restore or Recover Your iDevice (if You Forget Your Passcode)
    If you need to restore your device or ff you cannot remember the passcode, then you will need to restore your device using the computer with which you last synced it. This allows you to reset your passcode and re-sync the data from the device (or restore from a backup). If you restore on a different computer that was never synced with the device, you will be able to unlock the device for use and remove the passcode, but your data will not be present. Refer to Updating and restoring iPhone, iPad and iPod touch software.
    Try restoring the iOS device if backing up and erasing all content and settings doesn't resolve the issue. Using iTunes to restore iOS devices is part of standard isolation troubleshooting. Restoring your device will delete all data and content, including songs, videos, contacts, photos, and calendar information, and will restore all settings to their factory condition.
    Before restoring your iOS device, Apple recommends that you either sync with iTunes to transfer any purchases you have made, or back up new data (data acquired after your last sync). If you have movie rentals on the device, see iTunes Store movie rental usage rights in the United States before restoring.
    Follow these steps to restore your device:
         1. Verify that you are using the latest version of iTunes before attempting to update.
         2. Connect your device to your computer.
         3. Select your iPhone, iPad, or iPod touch when it appears in iTunes under Devices.
         4. Select the Summary tab.
         5. Select the Restore option.
         6. When prompted to back up your settings before restoring, select the Back Up
             option (see in the image below). If you have just backed up the device, it is not
             necessary to create another.
         7. Select the Restore option when iTunes prompts you (as long as you've backed up,
             you should not have to worry about restoring your iOS device).
         8. When the restore process has completed, the device restarts and displays the Apple
             logo while starting up:
               After a restore, the iOS device displays the "Connect to iTunes" screen. For updating
              to iOS 5 or later, follow the steps in the iOS Setup Assistant. For earlier versions of
              iOS, keep your device connected until the "Connect to iTunes" screen goes away or
              you see "iPhone is activated."
         9. The final step is to restore your device from a previous backup.
    If you can not restore your device then you will need to go to recovery mode.
    Placing your device into recovery mode:
    Follow these steps to place your iOS device into recovery mode. If your iOS device is already in recovery mode, you can proceed immediately to step 6.
         1. Disconnect the USB cable from the iPhone, iPad, or iPod touch, but leave the other end
             of the cable connected to your computer's USB port.
         2. Turn off the device: Press and hold the Sleep/Wake button for a few seconds until the
             red slider appears, then slide the slider. Wait for the device to turn off.
              If you cannot turn off the device using the slider, press and hold the Sleep/Wake
              and Home buttons at the same time. When the device turns off, release the Sleep/Wake
              and Home buttons.
         3. While pressing and holding the Home button, reconnect the USB cable to the device.
             The device should turn on. Note: If you see the screen pictured below, let the device
             charge for at least ten minutes to ensure that the battery has some charge, and then
             start with step 2 again.
         4. Continue holding the Home button until you see the "Connect to iTunes" screen.
             When this screen appears you can release the Home button.
         5. If necessary, open iTunes. You should see the following "recovery mode" alert:
         6. Use iTunes to restore the device.
    If you don't see the "Connect to iTunes" screen, try these steps again. If you see the "Connect to iTunes" screen but the device does not appear in iTunes, see this article and its related links.
    Additional Information:
    Note: When using recovery mode, you can only restore the device. All user content on the device will be erased, but if you had previously synced with iTunes on this computer, you can restore from a previous backup. See this article for more information.

  • How absolutely turn off computer if I use lilo boot loader?

    How absolutely turn off computer if I use lilo boot loader?
    With this /etc/lilo.conf content computer not absolutely turn off:
    # /etc/lilo.conf
    boot=/dev/hda
    # This line often fixes L40 errors on bootup
    # disk=/dev/hda bios=0x80
    default=arch
    timeout=0
    lba32
    prompt
    image=/boot/vmlinuz26 append="apm=power-off"
    label=arch
    root=/dev/hda1
    initrd=/boot/initrd26.img
    read-only

    Please provide some system specs so that we may give better advice. As phrakture has already said, you must have hardware that supports power management before auto shutdown works.

  • Professional 7: How to turn off display of tab order numbers in a form?

    When I open a PDF which has form fields, it displays each form field's tab order number. They appear as little boxed numbers in the upper left-hand side of each form field. Can anyone let me know how to turn off the display of these tab order numbers?
    Thanks in advance for your help.

    Bernd Alheit wrote:
    But I can't see the numbers in the original form.
    Have they posted the original form somewhere? I just see a couple of image files that the OP posted.

  • Yoga 2 Pro -- how to turn off switching mode notifications -- e.g. "tent mode", "tablet mode", etc?

    Does anyone know how to turn off the notifications that pop up in the upper right corner telling you that you have just changed from one configuration to another -- e.g. changing from tent mode to tablet mode?
    Solved!
    Go to Solution.

    Just disable it -
    Task manager > Startup > Click "Yoga Picks" > Click "disable"
    Next time you start your computer no more annoying pop ups.  If you want to be annoyed again you can always re-enable it.

  • I simply want to know how to turn off iCloud* without losing my contacts

    Call me old fashioned, but I really do NOT want to use iCloud EXCEPT for ONE THING*: and that's to find my phone, ipad or laptop if it goes missing.
    Having said that, I have figured out how to turn off icloud on my ipad and my iphone (I am not using the phone as a phone, just as a glorified ipod) while keeping the "find my ipad/iphone" function active, BUT
    I can't quite figure out how to do it on my laptop.
    I seem to have done it already for photos, and for the calendar, (I know this from checking iCloud to see what it's got) but just cannot figure out how to turn it off for contacts.
    And YES, I've backed up all of those things at LEAST 3 different ways, I just don't want the Cloud to be one of them.
    So can anyone tell me how to turn off contacts in the cloud without it also magically deleting them in my laptop? (I had it happen on the ipad, that's why I'm worried.)
    Thank you for understanding-I'm older and this stuff just keeps getting more complicated and I'm a simple person. I'll back up my own stuff!

    If you are refering to documents such as Pages and Numbers files....
    The only way around this is to "save as" you icloud documents using the associated app to a local folder on your mac.  Then turn off icloud.
    Of course, when you sign off of icloud, the docs are removed from the mac, but remain in icloud.  In the future when you sign back in, the documents are available to you again.
    Oh, and the icloud documents are also stored locally in ...
    ~/Library/Mobile Documents
    Note that Library in the user's home folder is now hidden, so you'll have to set Finder to view hidden files.
    The Mobile Documents folder has subfolder where copies of the doc/data files are stored.
    You can move these files to another folder to save them.

  • I'm using same icloud and same apple ID on two iphones. Now i get calls from same number on both iphones at the same time. How to turn off that?

    I'm using same icloud and same apple ID on two iphones. Now i get calls from same number on both iphones at the same time. How to turn off that?

    Apple ID's are not device specific, so when you changed it on the iPad 2 it changed it on the iPhone 4 as well, since it's the same account still. What you need to do is create a second Apple ID (so you'll have two accounts, one for iPhone 4 and a seperate one for iPad 2).
    To create a new Apple ID on your iPad 2:
    1) Go into Settings > Store.
    2) If you are already signed in, tap your Apple ID on the screen and you will be given a few options, one of which is to sign out of your account.
    3) After you sign out, now click the "Sign in" button.
    4) Tap "Create New Apple ID" and follow the instructions on-screen.

  • HT4314 Does anyone know how to turn off the pics of your Game Center friends showing on the right side of the screen while playing a game?

    Does anybody know how to turn off the pics of your Game Center friends that show while you're playing a game?

    Swamava,
    Thank you for the link you provided and I am glad I am not the only one with this problem, however beforeI install Adblock is it a free program or is there a fee you
    must pay to download the program? I am some what hesitant to be oblighted to
    a monthly or yearly bill.
    i

  • How to turn off pop-up blocker

    How to turn off pop-up blocker?

    Are you speaking of the one in the Firefox browser or Firefox OS?
    * Desktop Browser: [[Pop-up blocker settings, exceptions and troubleshooting]]

  • How to turn off voice over command in mac book pro 10.6.8

    how to turn off voice over command in mac book pro 10.6.8

    Open Universal Access preferences and disable it there.

Maybe you are looking for