How to turn off "save as" when opening a project template?

Every time i open my template and want to start working, there's logic's menu appears which offer "save current project as", how can i turn it off? if i want to save i will do it manually when create something cool.
didn't find it in preferences/general/startup action.
any thoughts will be appreciated.

my sine is fine wrote:
well, every time when i switch record button it always asks me where to save recorded data.
My point exactly. By not permitting Logic to establish a functional folder sturucture, you ask for a lot more mouseclicks and distractions than necessary.
so thanks but i still don't know how to avoid that "save as"
Do as I said, save it once and live happily ever after.
Christian

Similar Messages

How to turn off red LED when have a new voice mail?

How to turn off red LED when have a new voice mail?
My SPA303 VOIP Phone
Thanks

You must disable message waiting indication (MWI) on your platform.
Regards.

How can I turn off Recently Websites when opening new Safari window? After tapping on the two overlapping boxes on the bottom right of Safari, a new blank window appears with Favorites, but now in iOS 8, recently viewed websites are listed.

How can I turn off Recently Visited Websites when opening new Safari window?
After tapping on the two overlapping boxes on the bottom right of Safari, a new blank window appears with Favorites, but now in iOS 8, recently viewed websites are listed. How can I turn this function off? I do NOT want my new Safari windows to have history displayed of previous websites I visited. I only want my Favorites (on the top) to be displayed. Please help.
Thank you for your time, patience, understanding, kindness, and concern.

Thanks for replying, but that isn't the answer I am looking for. Also, there is no + sign, UNLESS you do tap the overlapping boxes.
Let me try to ask my question a little more clearly:
When I tap the two overlapping boxes on the lower left (the option to Open New Windows), the new Window that appears will show your Bookmarked FAVORITES. But with my new iPhone 6, and the new iOS 8.0.2, when I tap the two boxes to open a New Window, my Bookmark Favorites show (as they always have and should), but below them, there is a dividing line underneath them, and it says Recently Viewed Websites, and has these websites available to tap.
So my question is, HOW DO I TURN THESE OPTION OFF?
*UPDATE (10.13.14): Since I have asked this question, I no longer see these Recently Viewed Websites under my Bookmarked Favorites in my new Window tabs. So I hope that Apple fixed it, or somehow it was a mistake, or somehow I changed an Option on my iPhone 6 that stopped this for reoccurring.
Thank you for your help bobseufert! I appreciate your concern, kindness, and the time to try to help. I am grateful.
Have a blessed day.

How to turn off i-pad when circle coniues inmiddle/

How do I turn off my i-pad 2 when the circle coninues in the middle of the screen?

Have you tried a reset and then tried shutting down after the iPad has restarted ? Press and hold both the sleep and home buttons for about 10 to 15 seconds, after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.

Satellite A660-11M how to turn off the screen when I'm downloading?

i just want to know how to trurn off the screen for save energy and protect the screen,someone tell me please! thanks a lot !

If you are ready to switch off, put to standby/sleep mode you laptop by pressing alt-F3-F4 or through menu, then I recommend you set in power options "when I close the lid-do nothing". In that case closing the lid will switch off the screen for downloading time.

How to turn off Wi-Fi when I leave home?

I like to have Wi-Fi on when I'm home.
However, when I'm not at home, I'd like to have it off, to save battery - and back on when I return.
Is there a way to do this using Siri (disappointingly - I'm pretty sure not) or to do it using location-based services - similar to location-based reminders ("Remind me to feed the cat when I get home")?
I'd rather not have to manually edit Settings->Wi-Fi all the time.
Thanks.

as far as i know there isnt way to turn off the wifi..however u can go to tools-settings-connection-wireless LAN -show availability -never
this way it saves the battery of your phone and keeps u away from unwanted connection
try out!!!

How to turn off number sounds when dialing out?

? I have the keyboard sound off already, but, when I dial out the numbers are not silent.

The keyboard is just that, ...the keyboard, ....used only for text, email and web. The phone dialing screen is totally different and is uneffected by any changes you make to the keyboard settings. The only way to silence the phone when dialing out is to either turn the volume all the way down (not logical) or to engage the mute slide on the side of the phone. **Warning, ...both options also turn the ringer off or down. I would like to see apple address this in the next update. Users don't need to hear these loud numbers.

How to turn off suggested sites when using - Inbox

I don't want the suggested sites. Displaying them causes problems when rand children use computer.

You can turn off search suggestions & auto complete through Firefox & the search engine settings etc. depending specifically on what you are wanting to achieve.
See:
[[Search suggestions]]

Save As when opening new project?

Hi All,
In Logic Express 9 when starting a new project from a template I am presented a dialog box with, among other things, a "Save As" that allows me to name the project and choose where it is to be saved. This creates a Project Folder with asset sub-folders which is handy because after recording I like to bounce files to the Project Bounce Folder for use in other programs. Also, any changes to the project like recording audio are automatically saved.
For the life of me I cannot find a way to do this in Logic X.
It seems I now need to create a new project then do a "Save As" and re-open it to create a Project Folder with the good old "Bounce" sub-folder.
If I forget to do a "Save" or "Save As" until after I've recorded tracks Logic hasn't yet saved anything and will need to do so before it closes and I can re-open the project and bounce my mixes.
Hopefully someone with more experience and better reading skills and help me get X to act like 9. Is it possible?
Thanks,
Jon

I just tried: created New project from empty, recorded some audio on 1 track, then did a "Save" (not a "Save As...") and I was presented with the familiar "include assets?" dialog. I selected nothing (no Audio Files), nevertheless I got a Project Folder like this, complete with the untitled audio file I had just recorded.
So I don't understand what it is you can't do in LP X, and if you indeed cannot do it, maybe you need to enable some extra Advanced settings in the prefs? Other than that, it should all work - IF you are on v. 10.0.6

How to turn off a CS6 automatically opening a copy of a particular AI file when I open it

I must have clicked on something unintentionally... When I open this one CS6 file, automatically an additional copy appears on the screen too. It only does it to this one file.

You could set one window to outline mode and the one to preview mode and then don't need to switch the view when tracing an image. Or work in detail in one window and see the complete image in the other.

How to turn off "wake on clamshell open" ?

Hi,
The hinge on my Mab Book Pro is a little warped or something and when I close the lid it won't stay asleep, it keeps re awaking every 30 seconds or so. So how do I turn this off? Can't find that settings page.
Thanks

1) copy "sudo pmset -a lidwake 0" (without the quotation marks) from this post
2) Start up Terminal (in your Utilities folder)
3) Paste "sudo pmset -a lidwake 0" (without the quotation marks) at the grey prompt mark and hit return
4) Enter your Mac account admin password if requested (it won't appear on screen as you type) and hit return
If you wish to make sure it has changed use "sudo pmset -g" in the same fashion. It should produce a result which will include the line that "lidwake 0"
That's it!
The new setting will stay in place until you deliberately change it back. To do this use "sudo pmset -a lidwake 1"
Cheers
Rod

How to turn off XML tag when outputting xml nodes?

I'm outputting some xml data and each time ColdFusion adds the <?xml version="1.0" encoding="UTF-8"?> tag. Is there any way to turn this off?

It's difficult to tell what are are doing and how best to remedy it without you giving us at least some idea what your code looks like.
Adam

How to turn off image info when hovering mouse over image?

I think I must have selected something by accident because now everytime I hover my mouse over an image, I get all this info about that image. I know it can be info will be good to know but I don't want to see it all the time. I can't find anything in the settings that seems like it would be able turn it off.
suggestions?

ress the T key on your keyboard

How do I edit data source when opening Lumira project on a new PC?

I have been working on a project in Lumira for a client of the company I work for. The idea is that I build the Lumira project for them (with the goal of them being able to analyse data from their logistics department), and I then hand the completed project over to them, from which point they are able to update the data on a weekly basis.
I have been updating the data (which is derived from an excel spreadsheet) for a number of weeks with no issue at all, and the client is thoroughly impressed with it, and with the capabilities of Lumira. The problem is that when I want to share the project with the client, ie. by allowing them to open it and edit it on their own computers I am unable to do so.
This is the procedure I follow:
From My Documents, I open the folder named SAP Lumira Documents, select the project in question, and email it to the intended recipients.
From there, I instruct the recipients to open SAP Lumira, select File>Import to folder, and then select the project.
When the project is open, it works and interacts perfectly, but at this point, I want the client to be able to do the following:Select Data>Edit; to allow them to specify a new data source (which is identical to the one upon which the project is built), and therefore be able to update the data as and when necessary, without my help.
When I do this, however, I receive the following error:
Unable to find file "File Name & Location"
How do I work my way around this? I could rebuild the project on a computer at the client’s premises, but the idea is that many people are able to use this project, and refresh the data. So it is obviously impractical for me to rebuild this multiple times. I would really appreciate your assistance with this.

To elaborate on Tammy's idea, you could use for instance C:\Users\Public at the place where you initially put your Excel file to make sure this is found on the target computer. I would consider this a workaround though.
Or for Lumira documents that you already designed, change the location of the Excel file and use Data/Edit from your computer, then save the Lumira documents before sending them to the target audience.
From my humble opinion, the product should allow to use Data/Edit and change the source file even if the initial file path is no longer found. This should be possible for your target audience.
Antoine

How to turn off check memory

still my quetions:i wonder how to turn off Ram Check when i turn on my PC
my mainboard:MS-6323 as you know

turn on quick boot /fast boot is the usual one

How to turn off "save as" when opening a project template?

Similar Messages

Maybe you are looking for