How to turn off service led in a SF 6900

Hello
I have a SF6900 (the big server) and the service yellow light on top of the rack is on.
I can see it on with showplatform on the SC. There are no HW faults in this server. Does anyone know how to turn of this led?
I copied below part of the showplatform in the SC where the frame led is on and prtdiag in the OS 5.9
Frame: 0003ba:694412 (Mon Feb 25 17:25:18 PST 2008)
Fail LED:Off Service LED:Off
Frame Fan Trays
Left Tray Right Tray
State: OK OK
Power LED: On On
Fault LED: Off Off
Service LED: Off Off
Speed: Slow Slow
Temperature: Normal Normal
Power: OK OK
Fan 0: OK OK
Fan 1: OK OK
Fan 2: OK OK
Frame RTS
Rear/Left - OK, Connected to the System
Rear/Right - OK
Front/Left - OK, Connected to the System
Front/Right - OK
root@server> prtdiag
System Configuration: Sun Microsystems sun4u Sun Fire E6900
System clock frequency: 150 MHz
Memory size: 114688 Megabytes
========================= CPUs ===============================================
CPU Run E$ CPU CPU
FRU Name ID MHz MB Impl. Mask
/N0/SB0/P0 0,512 1500 32.0 US-IV+ 2.2
/N0/SB0/P1 1,513 1500 32.0 US-IV+ 2.2
/N0/SB0/P2 2,514 1500 32.0 US-IV+ 2.2
/N0/SB0/P3 3,515 1500 32.0 US-IV+ 2.2
/N0/SB1/P0 4,516 1500 32.0 US-IV+ 2.2
/N0/SB1/P1 5,517 1500 32.0 US-IV+ 2.2
/N0/SB1/P2 6,518 1500 32.0 US-IV+ 2.2
/N0/SB1/P3 7,519 1500 32.0 US-IV+ 2.2
/N0/SB2/P0 8,520 1500 32.0 US-IV+ 2.2
/N0/SB2/P1 9,521 1500 32.0 US-IV+ 2.2
/N0/SB2/P2 10,522 1500 32.0 US-IV+ 2.2
/N0/SB2/P3 11,523 1500 32.0 US-IV+ 2.2
/N0/SB3/P0 12,524 1500 32.0 US-IV+ 2.2
/N0/SB3/P1 13,525 1500 32.0 US-IV+ 2.2
/N0/SB3/P2 14,526 1500 32.0 US-IV+ 2.2
/N0/SB3/P3 15,527 1500 32.0 US-IV+ 2.2
/N0/SB4/P0 16,528 1500 32.0 US-IV+ 2.2
/N0/SB4/P1 17,529 1500 32.0 US-IV+ 2.2
/N0/SB4/P2 18,530 1500 32.0 US-IV+ 2.2
/N0/SB4/P3 19,531 1500 32.0 US-IV+ 2.2
/N0/SB5/P0 20,532 1500 32.0 US-IV+ 2.2
/N0/SB5/P1 21,533 1500 32.0 US-IV+ 2.2
/N0/SB5/P2 22,534 1500 32.0 US-IV+ 2.2
/N0/SB5/P3 23,535 1500 32.0 US-IV+ 2.2
========================= Memory Configuration ===============================
Logical Logical Logical
Port Bank Bank Bank DIMM Interleave Interleave
FRU Name ID Num Size Status Size Factor Segment
/N0/SB0/P0/B0 0 0 2048MB pass 1024MB 16-way 0
/N0/SB0/P0/B1 0 1 2048MB pass 1024MB 16-way 0
/N0/SB0/P0/B0 0 2 2048MB pass 1024MB 16-way 0
/N0/SB0/P0/B1 0 3 2048MB pass 1024MB 16-way 0
/N0/SB0/P1/B0 1 0 2048MB pass 1024MB 16-way 0
/N0/SB0/P1/B1 1 1 2048MB pass 1024MB 16-way 0
/N0/SB0/P1/B0 1 2 2048MB pass 1024MB 16-way 0
/N0/SB0/P1/B1 1 3 2048MB pass 1024MB 16-way 0
/N0/SB0/P2/B0 2 0 2048MB pass 1024MB 16-way 0
/N0/SB0/P2/B1 2 1 2048MB pass 1024MB 16-way 0
/N0/SB0/P2/B0 2 2 2048MB pass 1024MB 16-way 0
/N0/SB0/P2/B1 2 3 2048MB pass 1024MB 16-way 0
/N0/SB0/P3/B0 3 0 2048MB pass 1024MB 16-way 0
/N0/SB0/P3/B1 3 1 2048MB pass 1024MB 16-way 0
/N0/SB0/P3/B0 3 2 2048MB pass 1024MB 16-way 0
/N0/SB0/P3/B1 3 3 2048MB pass 1024MB 16-way 0
/N0/SB1/P0/B0 4 0 1024MB pass 512MB 16-way 1
/N0/SB1/P0/B1 4 1 1024MB pass 512MB 16-way 1
/N0/SB1/P0/B0 4 2 1024MB pass 512MB 16-way 1
/N0/SB1/P0/B1 4 3 1024MB pass 512MB 16-way 1
/N0/SB1/P1/B0 5 0 1024MB pass 512MB 16-way 1
/N0/SB1/P1/B1 5 1 1024MB pass 512MB 16-way 1
/N0/SB1/P1/B0 5 2 1024MB pass 512MB 16-way 1
/N0/SB1/P1/B1 5 3 1024MB pass 512MB 16-way 1
/N0/SB1/P2/B0 6 0 1024MB pass 512MB 16-way 1
/N0/SB1/P2/B1 6 1 1024MB pass 512MB 16-way 1
/N0/SB1/P2/B0 6 2 1024MB pass 512MB 16-way 1
/N0/SB1/P2/B1 6 3 1024MB pass 512MB 16-way 1
/N0/SB1/P3/B0 7 0 1024MB pass 512MB 16-way 1
/N0/SB1/P3/B1 7 1 1024MB pass 512MB 16-way 1
/N0/SB1/P3/B0 7 2 1024MB pass 512MB 16-way 1
/N0/SB1/P3/B1 7 3 1024MB pass 512MB 16-way 1
/N0/SB2/P0/B0 8 0 1024MB pass 512MB 16-way 2
/N0/SB2/P0/B1 8 1 1024MB pass 512MB 16-way 2
/N0/SB2/P0/B0 8 2 1024MB pass 512MB 16-way 2
/N0/SB2/P0/B1 8 3 1024MB pass 512MB 16-way 2
/N0/SB2/P1/B0 9 0 1024MB pass 512MB 16-way 2
/N0/SB2/P1/B1 9 1 1024MB pass 512MB 16-way 2
/N0/SB2/P1/B0 9 2 1024MB pass 512MB 16-way 2
/N0/SB2/P1/B1 9 3 1024MB pass 512MB 16-way 2
/N0/SB2/P2/B0 10 0 1024MB pass 512MB 16-way 2
/N0/SB2/P2/B1 10 1 1024MB pass 512MB 16-way 2
/N0/SB2/P2/B0 10 2 1024MB pass 512MB 16-way 2
/N0/SB2/P2/B1 10 3 1024MB pass 512MB 16-way 2
/N0/SB2/P3/B0 11 0 1024MB pass 512MB 16-way 2
/N0/SB2/P3/B1 11 1 1024MB pass 512MB 16-way 2
/N0/SB2/P3/B0 11 2 1024MB pass 512MB 16-way 2
/N0/SB2/P3/B1 11 3 1024MB pass 512MB 16-way 2
/N0/SB3/P0/B0 12 0 1024MB pass 512MB 16-way 3
/N0/SB3/P0/B1 12 1 1024MB pass 512MB 16-way 3
/N0/SB3/P0/B0 12 2 1024MB pass 512MB 16-way 3
/N0/SB3/P0/B1 12 3 1024MB pass 512MB 16-way 3
/N0/SB3/P1/B0 13 0 1024MB pass 512MB 16-way 3
/N0/SB3/P1/B1 13 1 1024MB pass 512MB 16-way 3
/N0/SB3/P1/B0 13 2 1024MB pass 512MB 16-way 3
/N0/SB3/P1/B1 13 3 1024MB pass 512MB 16-way 3
/N0/SB3/P2/B0 14 0 1024MB pass 512MB 16-way 3
/N0/SB3/P2/B1 14 1 1024MB pass 512MB 16-way 3
/N0/SB3/P2/B0 14 2 1024MB pass 512MB 16-way 3
/N0/SB3/P2/B1 14 3 1024MB pass 512MB 16-way 3
/N0/SB3/P3/B0 15 0 1024MB pass 512MB 16-way 3
/N0/SB3/P3/B1 15 1 1024MB pass 512MB 16-way 3
/N0/SB3/P3/B0 15 2 1024MB pass 512MB 16-way 3
/N0/SB3/P3/B1 15 3 1024MB pass 512MB 16-way 3
/N0/SB4/P0/B0 16 0 1024MB pass 512MB 16-way 4
/N0/SB4/P0/B1 16 1 1024MB pass 512MB 16-way 4
/N0/SB4/P0/B0 16 2 1024MB pass 512MB 16-way 4
/N0/SB4/P0/B1 16 3 1024MB pass 512MB 16-way 4
/N0/SB4/P1/B0 17 0 1024MB pass 512MB 16-way 4
/N0/SB4/P1/B1 17 1 1024MB pass 512MB 16-way 4
/N0/SB4/P1/B0 17 2 1024MB pass 512MB 16-way 4
/N0/SB4/P1/B1 17 3 1024MB pass 512MB 16-way 4
/N0/SB4/P2/B0 18 0 1024MB pass 512MB 16-way 4
/N0/SB4/P2/B1 18 1 1024MB pass 512MB 16-way 4
/N0/SB4/P2/B0 18 2 1024MB pass 512MB 16-way 4
/N0/SB4/P2/B1 18 3 1024MB pass 512MB 16-way 4
/N0/SB4/P3/B0 19 0 1024MB pass 512MB 16-way 4
/N0/SB4/P3/B1 19 1 1024MB pass 512MB 16-way 4
/N0/SB4/P3/B0 19 2 1024MB pass 512MB 16-way 4
/N0/SB4/P3/B1 19 3 1024MB pass 512MB 16-way 4
/N0/SB5/P0/B0 20 0 1024MB pass 512MB 16-way 5
/N0/SB5/P0/B1 20 1 1024MB pass 512MB 16-way 5
/N0/SB5/P0/B0 20 2 1024MB pass 512MB 16-way 5
/N0/SB5/P0/B1 20 3 1024MB pass 512MB 16-way 5
/N0/SB5/P1/B0 21 0 1024MB pass 512MB 16-way 5
/N0/SB5/P1/B1 21 1 1024MB pass 512MB 16-way 5
/N0/SB5/P1/B0 21 2 1024MB pass 512MB 16-way 5
/N0/SB5/P1/B1 21 3 1024MB pass 512MB 16-way 5
/N0/SB5/P2/B0 22 0 1024MB pass 512MB 16-way 5
/N0/SB5/P2/B1 22 1 1024MB pass 512MB 16-way 5
/N0/SB5/P2/B0 22 2 1024MB pass 512MB 16-way 5
/N0/SB5/P2/B1 22 3 1024MB pass 512MB 16-way 5
/N0/SB5/P3/B0 23 0 1024MB pass 512MB 16-way 5
/N0/SB5/P3/B1 23 1 1024MB pass 512MB 16-way 5
/N0/SB5/P3/B0 23 2 1024MB pass 512MB 16-way 5
/N0/SB5/P3/B1 23 3 1024MB pass 512MB 16-way 5
========================= IO Cards =========================
Bus Max
IO Port Bus Freq Bus Dev,
FRU Name Type ID Side Slot MHz Freq Func State Name Model
/N0/IB6/P0 PCI 24 B 0 33 33 1,0 ok pci-pci8086,b154.0/network (netw+ pci-bridge
/N0/IB6/P0 PCI 24 B 0 33 33 0,0 ok network-pci100b,35.30 SUNW,pci-ce
/N0/IB6/P0 PCI 24 B 0 33 33 1,0 ok network-pci100b,35.30 SUNW,pci-ce
/N0/IB6/P0 PCI 24 B 0 33 33 2,0 ok scsi-pci1000,b.7/disk (block)
/N0/IB6/P0 PCI 24 B 0 33 33 2,1 ok scsi-pci1000,b.7/disk (block)
/N0/IB6/P0 PCI 24 A 3 66 66 1,0 ok network-pci100b,35.30 SUNW,pci-ce
/N0/IB6/P1 PCI 25 B 4 66 66 1,0 ok pci-pci8086,537c.7/network (netw+ pci-bridge
/N0/IB6/P1 PCI 25 B 4 66 66 0,0 ok network-pci100b,35.30 SUNW,pci-x-qge
/N0/IB6/P1 PCI 25 B 4 66 66 1,0 ok network-pci100b,35.30 SUNW,pci-x-qge
/N0/IB6/P1 PCI 25 B 4 66 66 2,0 ok network-pci100b,35.30 SUNW,pci-x-qge
/N0/IB6/P1 PCI 25 B 4 66 66 3,0 ok network-pci100b,35.30 SUNW,pci-x-qge
/N0/IB6/P1 PCI 25 A 7 66 66 1,0 ok SUNW,qlc-pci1077,2312.1077.10a.2+ 0x10a
/N0/IB6/P1 PCI 25 A 7 66 66 1,1 ok SUNW,qlc-pci1077,2312.1077.10a.2+ 0x10a
/N0/IB7/P0 PCI 26 B 0 33 33 1,0 ok pci12d4,301-pci12d4,301.12d4.301+
/N0/IB7/P0 PCI 26 B 1 33 33 2,0 ok pci12d4,301-pci12d4,301.12d4.301+
/N0/IB7/P0 PCI 26 A 2 66 66 2,0 ok pci12d4,301-pci12d4,301.12d4.301+
/N0/IB7/P0 PCI 26 A 3 66 66 1,0 ok pci12d4,301-pci12d4,301.12d4.301+
/N0/IB8/P0 PCI 28 B 0 33 33 1,0 ok pci-pci8086,b154.0/network (netw+ pci-bridge
/N0/IB8/P0 PCI 28 B 0 33 33 0,0 ok network-pci100b,35.30 SUNW,pci-ce
/N0/IB8/P0 PCI 28 B 0 33 33 1,0 ok network-pci100b,35.30 SUNW,pci-ce
/N0/IB8/P0 PCI 28 B 0 33 33 2,0 ok scsi-pci1000,b.7/disk (block)
/N0/IB8/P0 PCI 28 B 0 33 33 2,1 ok scsi-pci1000,b.7/disk (block)
/N0/IB8/P0 PCI 28 A 3 66 66 1,0 ok network-pci100b,35.30 SUNW,pci-ce
/N0/IB8/P1 PCI 29 B 4 66 66 1,0 ok pci-pci8086,537c.7/network (netw+ pci-bridge
/N0/IB8/P1 PCI 29 B 4 66 66 0,0 ok network-pci100b,35.30 SUNW,pci-x-qge
/N0/IB8/P1 PCI 29 B 4 66 66 1,0 ok network-pci100b,35.30 SUNW,pci-x-qge
/N0/IB8/P1 PCI 29 B 4 66 66 2,0 ok network-pci100b,35.30 SUNW,pci-x-qge
/N0/IB8/P1 PCI 29 B 4 66 66 3,0 ok network-pci100b,35.30 SUNW,pci-x-qge
/N0/IB8/P1 PCI 29 A 7 66 66 1,0 ok SUNW,qlc-pci1077,2312.1077.10a.2+ 0x10a
/N0/IB8/P1 PCI 29 A 7 66 66 1,1 ok SUNW,qlc-pci1077,2312.1077.10a.2+ 0x10a
/N0/IB9/P0 PCI 30 B 0 33 33 1,0 ok pci12d4,301-pci12d4,301.12d4.301+
/N0/IB9/P0 PCI 30 B 1 33 33 2,0 ok pci12d4,301-pci12d4,301.12d4.301+
/N0/IB9/P0 PCI 30 A 2 66 66 2,0 ok pci12d4,301-pci12d4,301.12d4.301+
/N0/IB9/P0 PCI 30 A 3 66 66 1,0 ok pci12d4,301-pci12d4,301.12d4.301+
========================= Active Boards for Domain ===========================
Board Receptacle Occupant
FRU Name Type Status Status Condition Info
/N0/SB0 CPU_V3 connected configured ok powered-on, assigned
/N0/SB1 CPU_V3 connected configured ok powered-on, assigned
/N0/SB2 CPU_V3 connected configured ok powered-on, assigned
/N0/SB3 CPU_V3 connected configured ok powered-on, assigned
/N0/SB4 CPU_V3 connected configured ok powered-on, assigned
/N0/SB5 CPU_V3 connected configured ok powered-on, assigned
/N0/IB6 PCI+I/OBo connected configured ok powered-on, assigned
/N0/IB7 PCI+I/OBo connected configured ok powered-on, assigned
/N0/IB8 PCI+I/OBo connected configured ok powered-on, assigned
/N0/IB9 PCI+I/OBo connected configured ok powered-on, assigned
========================= Available Boards/Slots for Domain ===========================
Board Receptacle Occupant
FRU Name Type Status Status Condition Info
There are currently no Boards/Slots available to this Domain
========================= Hardware Failures ==================================
No Hardware failures found in System

If I understand your description correctly,
it's the frame manager that has the fault light.
That's an old quirk that is specific to that rack component.
It has (essentially) no impact on whatever systems are installed to the rack.
It is usually just a visual annoyance.
Use your service contract and open a support case with Sun.
That will give them a chance to help you check on everything.
They'll walk you through the correct steps of power-cycling the frame manager.
That can be done while the servers are happily serving.

Similar Messages

How to turn off red LED when have a new voice mail?

How to turn off red LED when have a new voice mail?
My SPA303 VOIP Phone
Thanks

You must disable message waiting indication (MWI) on your platform.
Regards.

Don't know how to turn off T420 LED light

I upgraded my thinkpad T420 to Windows 8. Everything is good, but the Bluetooth LED light is always turned on. I don't know how to turn it off. Does anyone have same situation?

Yes, unfortunately. You can turn off the bluetooth led by disabling bluetooth in the bios. Not very convenient if u use Bluetooth regularly.

How to turn OFF status LED on VC220?

I'm looking for a way to turn off the status LED on a VC220. This is not the IR LED, but instead the large blinking LED on the front.
The documentation mentions that it can be turned off, but I can't find a menu option for this.
Thanks for your help!
--Joe
Status LED
Indicates the following status:
LED Off—The power is off or the LED status is turned off.
Flashing green in one second intervals—The camera and network is functioning.
Steady orange—The camera can’t detect a networking signal; thus the camera is not functioning. For example, the Ethernet cable is not attached.
Flashing orange—The PIR sensor noted movement. Flashing green rapidly—The firmware is being
upgraded.
Flashing orange rapidly—The camera’s default settings are being restored.
Alternating flashing green and orange—Video has been lost.

Joe,
Use the Network Setting > IP Setting page to set the IP address and other related
settings. When you complete the configuration, click Save to save the settings;
otherwise click Cancel to discard the changes.
• Disable LED Operators—Select to disable the LED illuminators. You may
choose to do this if you don't want to alert others that the network camera is
on. Use the Network Setting > IP Setting page to set the IP address and other related
settings. When you complete the configuration, click Save to save the settings;
otherwise click Cancel to discard the changes.
http://www.cisco.com/en/US/docs/security/csbvsc/vc220/administration/guide/VC220AdministrationGuide.pdf
page; 41
Hope this is what you're looking for,
Jasbryan

MSI Z87 GD65 "Dragon" Motherboard - How to turn OFF blue LED?

Hi guys, recently purchased this motherboard for my i7 4770k and I LOVE IT. BIOS works great and the computer boots up flawless with no errors.
My question is, the motherboard has a red theme to it, and my case is red/black as-well.
However, the mobo has a BLUE LED on it, when it is powered on. I Looked in BIOS but could not find a way to turn it off.
Is there any way to turn this blue LED off? It kind of ruins the red/black theme! :(
Please let me know,
Thank you!

Nope , the option is NOT under hardware monitor
There is a "Power LED" option under the "advanced" setting, but it doesn't affect the "blue LED" for the BIOS , only the purple-redish LED for "audio" on the motherboard.....

How to turn off screen on Macbook Air when connected to Computer LeD monitor?

How to turn off screen on Macbook Air when connected to Led monitor screen?

The only way you can turn it off is to close the lid - so you would need an external wired or wireless keyboard and mouse/trackpad attached.
Matt

How can I turn off the LED light? It's constantly on.

If anyone can give me some help, that would be tremendous. How can I turn off the LED light as it's contstantly turned on???

If a reset does not work, then the next steps in user troubleshooting are restore from a backup and if that doesn't work, then restore as a new device. If that doesn't work, then you can make an appointment to take the device to the Apple store and have the hardware checked.
If you live close to an Apple store, you could go there first, but they will probably ask if you have done a restore and would do one there, so make sure you have backed up and synced all of your data.

GT70 Turn off Display LED Backlight

Does anyone know how to turn off the DISPLAY LED Backlight when using an external monitor on a GT70 running 64bit windows 8?

You mean display all only on external?
Just righclick desktop and go to resolution setting. Set screen output only on external. You can do it in Intel graphic card settings too.
You can use Fn button on keyboard too. If i good rember FN + F2(just check images on buttons).
If you want to have 2 monitors but from some reasons you want to turn of screen on build in for some moment there is button to do next to power button 0 right side.

How to turn off categorization for case management

Hopefully a simple one, how to turn off categorization for case management.
I get this error in CRM 5.0 when choosing Cases.
CASE_MANAGEMENT, CASE_TYPE, Z_01
My categorization in the IC profile is set to ZDEFAULT (copy of default) but only contains
IR     Interaction Record
SO     Service Order
ST     Service Ticket
Does not have the CA case entry that is in DEFAULT.
Z_01 is my case type but I see no place to set the categorization.
I think I am missing something easy but don't see it.

I'm guessing zdefault had same description default and it was picking up the default one in error.

2Wire Router Issues - How to Turn off Security

There appears to be an ongoing issue with MacBook wireless and the 2Wire routers (via AT&T/SBC). My wireless was working fine until I downloaded the recent Apple updates.
I saw one fix for this posted here:
http://discussions.apple.com/thread.jspa?threadID=874076
However, I do not know how to turn off the security to the router. Also, what would be the implications of doing so?
Have any other MacBook/2Wire users had this issue and come up with a fix until Apple does? Just called Customer Service, and they don't have any fixes at this time.
Thanks!

You will need to follow the directions in the 2Wire user guide.

Turn off notification LED

So, I've been a crackberry user for years, until now. In the pas I was able to easily turn on and off, and set notification types via profiles. I've been able to figure out how to ensure the Droid does not vibrate or make noise when I recieve messages, but does anyone know how to shut off the notification LED? This is a pretty annoying flash at 3:00 am

I apologize, but you can not turn off the LED from the settings menu on the phone.
There are applications like hancent, missed call, and gmail notifier on the Android Market that will allow you to change the LED notification color. These are Android applications offered on the Android Market and are not Verizon Wireless applications. You can try turning the phone facedown to suppress the LED light.

Yoga 2 Pro -- how to turn off switching mode notifications -- e.g. "tent mode", "tablet mode", etc?

Does anyone know how to turn off the notifications that pop up in the upper right corner telling you that you have just changed from one configuration to another -- e.g. changing from tent mode to tablet mode?
Solved!
Go to Solution.

Just disable it -
Task manager > Startup > Click "Yoga Picks" > Click "disable"
Next time you start your computer no more annoying pop ups. If you want to be annoyed again you can always re-enable it.

I simply want to know how to turn off iCloud* without losing my contacts

Call me old fashioned, but I really do NOT want to use iCloud EXCEPT for ONE THING*: and that's to find my phone, ipad or laptop if it goes missing.
Having said that, I have figured out how to turn off icloud on my ipad and my iphone (I am not using the phone as a phone, just as a glorified ipod) while keeping the "find my ipad/iphone" function active, BUT
I can't quite figure out how to do it on my laptop.
I seem to have done it already for photos, and for the calendar, (I know this from checking iCloud to see what it's got) but just cannot figure out how to turn it off for contacts.
And YES, I've backed up all of those things at LEAST 3 different ways, I just don't want the Cloud to be one of them.
So can anyone tell me how to turn off contacts in the cloud without it also magically deleting them in my laptop? (I had it happen on the ipad, that's why I'm worried.)
Thank you for understanding-I'm older and this stuff just keeps getting more complicated and I'm a simple person. I'll back up my own stuff!

If you are refering to documents such as Pages and Numbers files....
The only way around this is to "save as" you icloud documents using the associated app to a local folder on your mac. Then turn off icloud.
Of course, when you sign off of icloud, the docs are removed from the mac, but remain in icloud. In the future when you sign back in, the documents are available to you again.
Oh, and the icloud documents are also stored locally in ...
~/Library/Mobile Documents
Note that Library in the user's home folder is now hidden, so you'll have to set Finder to view hidden files.
The Mobile Documents folder has subfolder where copies of the doc/data files are stored.
You can move these files to another folder to save them.

I'm using same icloud and same apple ID on two iphones. Now i get calls from same number on both iphones at the same time. How to turn off that?

I'm using same icloud and same apple ID on two iphones. Now i get calls from same number on both iphones at the same time. How to turn off that?

Apple ID's are not device specific, so when you changed it on the iPad 2 it changed it on the iPhone 4 as well, since it's the same account still. What you need to do is create a second Apple ID (so you'll have two accounts, one for iPhone 4 and a seperate one for iPad 2).
To create a new Apple ID on your iPad 2:
1) Go into Settings > Store.
2) If you are already signed in, tap your Apple ID on the screen and you will be given a few options, one of which is to sign out of your account.
3) After you sign out, now click the "Sign in" button.
4) Tap "Create New Apple ID" and follow the instructions on-screen.

HT4314 Does anyone know how to turn off the pics of your Game Center friends showing on the right side of the screen while playing a game?

Does anybody know how to turn off the pics of your Game Center friends that show while you're playing a game?

Swamava,
Thank you for the link you provided and I am glad I am not the only one with this problem, however beforeI install Adblock is it a free program or is there a fee you
must pay to download the program? I am some what hesitant to be oblighted to
a monthly or yearly bill.
i

How to turn off service led in a SF 6900

Similar Messages

Maybe you are looking for