How to turn on debug mode for NW 7.3 trial version?

Hello SDN!
I've got a trial version of NW 73 from here: http://scn.sap.com/community/netweaver/blog/2012/07/12/netweaver-compositon-environment-73-trial-version-available-on-scn and installed it from instruction. Installation was OK and Java instance is up and running now. System asked me to change administrator password after I logon to the NWA for the first time. I've changed password and now I'm able to login to the NWA but system doesn't accept neither new administrator password nor OS users (root and cesadm users) passwords when I try to turn on debug mode for Java instance.
What I did wrong?
Regards, Lev

Hi Benny!
Thanks for answer.
The installation finished without any errors. Java instance run successfully. After install I opened browser right in VM window with url http://sapnwce73:50000/nwa to switch on debug mode. Since it was my first logon to the system as "Administrator" user the system asked me to change password. I've changed password and logon to NWA successfully as user with login "Administrator" and his new password. After I switched on debug mode the system asked me to login and password as shown on the follow screenshot:
This screen didn't accept neither Administrator user credentials, nor cesadm user credentials, nor root user credentials.
Also I've found that I'm not able to restart/stop Java instance because of the same issue - system doesn't accept user credentials.

Similar Messages

Turn off compatibility mode for itunes

How to turn off compatibility mode for itunes

Here's a support article that may help:
iTunes for Windows: How to turn off Compatibility Mode - Apple Support
Cheers,
GB

Every time I start iTunes I get the message: "iTunes exec has been set to run in compatability mode for an older version of Windows. Turn off compatability mode for iTunes before you open it." How do I turn off the compatability mode?

Every time I start iTunes I get the message: "iTunes exec has been set to run in compatability mode for an older version of Windows. Turn off compatability mode for iTunes before you open it." How do I turn off the compatability mode? Particularly when I have to do it before I turn on iTunes.

Try the following document, only be sure that none of the boxes in the compatibility mode tab are checked (not just the compatibility mode box itself):
iTunes for Windows: How to turn off Compatibility Mode

Getting error message that states itunesexe has been set to run in compatibilty mode for an older versions of windows for best results turn off compatibility mode for itunes before you open it .How do i turn off compatibility mode?

recieved error message that states" itunes exe has been set to run in compatibility mode for an older versions of windows for best results turn off compatibility mode for itunes before you open it. How do i access compatibility mode and turn it off ? Believe i have Windows 7.

Try the following document, only be sure that none of the boxes in the compatibility tab are checked (not just the compatibility mode box itself):
iTunes for Windows: How to turn off Compatibility Mode

HOW TO TURN ON DEBUG OPTION OF APXIIMPT

제품 : FIN_AP
작성날짜 : 2003-05-13
HOW TO TURN ON DEBUG OPTION OF APXIIMPT
=======================================
PURPOSE
PAYABLES OPEN INTERFACE IMPORT PROGRAM (APXIIMPT) 수행시 erorr 가 발생하였을 경우 debug mode로 log를 생성하게 하여 문제해결에 도움을 준다.
Explanation
1. Loggon to Applications with System Administrator Responsibility.
2. Go to 'Concurrent -> Program -> Define'
3. Query 'APXIIMPT' in Short Name field
4. Click Parameter button
5. Select 'Trace Switch' Row and then check 'Display' checkbox in the bottom
6. Select 'Debug Switch' Row and then check 'Display' checkbox in the bottom
7. Save what you are done
8. Change Responsibility to 'Payables User'.
9. Run the open interface program with parameter 'Trace Switch' to 'Yes' and 'Debug Switch' to 'Yes'
Example
N/A
Reference Documents
NOTE 107617.1

Open this file: C:\Program Files\Cisco\Desktop\config\Agent.cfg
Then change this line: Threshold=DEBUG (or TRACE).
Empty this folder's contents to give you a clean slate: C:\Program Files\Cisco\Desktop\log
Restart CAD and reproduce the issue.
[...] Agent himself can turn-on debug to gather debug logs ??
As long as the agent has write access to those directories it is possible to self-enable/disable trace logging.
Please remember to rate helpful responses and identify helpful or correct answers.

TS1538 how to turn off compatibility mode so my itunes can play..... wont play on windows 8

i have an i phone i downloaded music on my home pc which is vista but can not play on windows 8 on my office pc its says turn off compatibility mode how do i do that?

Refer to this article:
iTunes for Windows: How to turn off Compatibility Mode
http://support.apple.com/kb/TS1489

Debug-Mode for Security Realm

Hi,
then i try start the server with the debug mode i get the following
exception:
Starting WebLogic Server ....
<Tue Oct 24 17:45:33 GMT+02:00 2000> <Info> <Management> <Loading
configuration file .\config\virtHoDomain\config.xml...>
Unable to dump log: Fatal initialization exception
Throwable: java.lang.StackOverflowError
java.lang.StackOverflowError
at java.util.Collections$SynchronizedMap.get(Collections.java:1433)
at
weblogic.kernel.ResettableThreadLocal.currentStorage(ResettableThreadLocal.j
ava:100)
at
weblogic.kernel.ResettableThreadLocal.get(ResettableThreadLocal.java:35)
at
weblogic.transaction.internal.TransactionManagerImpl.getOrCreateThreadProp(T
ransactionManagerImpl.java:844)
at
weblogic.transaction.internal.TransactionManagerImpl.getTransaction(Transact
ionManagerImpl.java:359)
at weblogic.transaction.TxHelper.getTransaction(TxHelper.java:34)
at
weblogic.management.logging.LogBroadcaster.log(LogBroadcaster.java:156)
at
weblogic.management.logging.LogBroadcaster.log(LogBroadcaster.java:145)
at
weblogic.management.logging.LogBroadcaster.log(LogBroadcaster.java:138)
at weblogic.logging.LogManager.log(LogManager.java:93)
at weblogic.logging.LogOutputStream.debug(LogOutputStream.java:80)
at weblogic.security.acl.CachingRealm.getUser(CachingRealm.java:775)
at weblogic.security.acl.Security.getCurrentUser(Security.java:238)
at
weblogic.management.logging.LogBroadcaster.log(LogBroadcaster.java:161)
at
weblogic.management.logging.LogBroadcaster.log(LogBroadcaster.java:145)
at
weblogic.management.logging.LogBroadcaster.log(LogBroadcaster.java:138)
at weblogic.logging.LogManager.log(LogManager.java:93)
at weblogic.logging.LogOutputStream.debug(LogOutputStream.java:80)
at weblogic.security.acl.CachingRealm.getUser(CachingRealm.java:775)
at weblogic.security.acl.Security.getCurrentUser(Security.java:238)
at
weblogic.management.logging.LogBroadcaster.log(LogBroadcaster.java:161)
at
weblogic.management.logging.LogBroadcaster.log(LogBroadcaster.java:145)
at
weblogic.management.logging.LogBroadcaster.log(LogBroadcaster.java:138)
at weblogic.logging.LogManager.log(LogManager.java:93)
I even get that exeception if try to initialize the
weblogic.logging.LogManager in a commun class.
I think this is a bug.

Hi Lars Klippert
Sorry for the late reply. First of all, thank you for uncovering an untested part of ServerDebug MBean. The Debug Mode for Security Realms currently works for fileRealm but doesnot work for alternate realms(e.g., LDAP realm). We're in the process of fixing this in the future releases(may not be Beta Refresh but will definitely be fixed in GA). I'm attaching a working config.xml(with fileRealm) and the only change you've to make to your config.xml is
<Server
<ServerDebug
DebugSecurityRealm="true"
Name="myserver"
/>
</Server>
If you're debugging a fileRealm then I belive, this serves your purpose. But if you're debugging a Security Realm other than fileRealm and this is blocking you, plz let us know so that this will be fixed with a higer priority. Thanks again for uncovering this. We will let you know as soon as this is fixed.
regards
"Lars Klippert" <[email protected]> wrote:
Hi,
Part from config.xml:
<Server ...>
<ServerDebug Name="virtHoServer" DebugSecurityRealm="false"/>
</Server>
Part from my start-script:
%JAVA_HOME%\bin\java.exe -ms16m -mx64m -classpath
%CLASSPATH% -Dweblogic.Domain=virtHoDomain -Dweblogic.Name=virtHoServer -Dja
va.security.policy==.\lib\weblogic.policy weblogic.Server
As you can see i enable the debug-mode in the config.xml.
I also get the exception then i disable the debug-modus and
initialize the weblogic.logging.LogOutputStream by hand.
For our EntityBeans we have developed a custom error logger
that uses the weblogic.logging.LogOutputStream and it works
fine. Maybe the error only acccours if two or more
weblogic.logging.LogOutputStreams are active...
With the 5.1.0 version of the server everything works fine.
Thanks
"Paul Ferwerda" <[email protected]> schrieb im Newsbeitrag
news:[email protected]...
How exactly are you starting "the server with debug mode"?
Thanks,
Paul
Lars Klippert wrote:
Hi,
then i try start the server with the debug mode i get the following
exception:
Starting WebLogic Server ....
<Tue Oct 24 17:45:33 GMT+02:00 2000> <Info> <Management> <Loading
configuration file .\config\virtHoDomain\config.xml...>
Unable to dump log: Fatal initialization exception
Throwable: java.lang.StackOverflowError
java.lang.StackOverflowError
at
java.util.Collections$SynchronizedMap.get(Collections.java:1433)
at
weblogic.kernel.ResettableThreadLocal.currentStorage(ResettableThreadLocal.j
ava:100)
at
weblogic.kernel.ResettableThreadLocal.get(ResettableThreadLocal.java:35)
at
weblogic.transaction.internal.TransactionManagerImpl.getOrCreateThreadProp(T
ransactionManagerImpl.java:844)
at
weblogic.transaction.internal.TransactionManagerImpl.getTransaction(Transact
ionManagerImpl.java:359)
atweblogic.transaction.TxHelper.getTransaction(TxHelper.java:34)
at
weblogic.management.logging.LogBroadcaster.log(LogBroadcaster.java:156)
at
weblogic.management.logging.LogBroadcaster.log(LogBroadcaster.java:145)
at
weblogic.management.logging.LogBroadcaster.log(LogBroadcaster.java:138)
at weblogic.logging.LogManager.log(LogManager.java:93)
atweblogic.logging.LogOutputStream.debug(LogOutputStream.java:80)
atweblogic.security.acl.CachingRealm.getUser(CachingRealm.java:775)
atweblogic.security.acl.Security.getCurrentUser(Security.java:238)
at
weblogic.management.logging.LogBroadcaster.log(LogBroadcaster.java:161)
at
weblogic.management.logging.LogBroadcaster.log(LogBroadcaster.java:145)
at
weblogic.management.logging.LogBroadcaster.log(LogBroadcaster.java:138)
at weblogic.logging.LogManager.log(LogManager.java:93)
atweblogic.logging.LogOutputStream.debug(LogOutputStream.java:80)
atweblogic.security.acl.CachingRealm.getUser(CachingRealm.java:775)
atweblogic.security.acl.Security.getCurrentUser(Security.java:238)
at
weblogic.management.logging.LogBroadcaster.log(LogBroadcaster.java:161)
at
weblogic.management.logging.LogBroadcaster.log(LogBroadcaster.java:145)
at
weblogic.management.logging.LogBroadcaster.log(LogBroadcaster.java:138)
at weblogic.logging.LogManager.log(LogManager.java:93)
I even get that exeception if try to initialize the
weblogic.logging.LogManager in a commun class.
I think this is a bug.

Enable the Debug mode for Dispatcher and Server0.

Hello All,
In our EP server 7.0(stand alone java) apart from SDM we need to enable the Debug mode for Dispatcher and Server0.I tried to do it from mmc but cannot do so.When I try to right click & enable from mmc the "Enable Process" is not highlited,it is disabled.How Can I enable the the Debug mode for Dispatcher and Server0?

Hi
Goto Configtool Select Instance_IDxxxxx on the right side you can see "Servers Debug" tab, select that and choose, enable debug and debuggable options.
Save the settings.
Then expand the above mentioned node and select Server_IDxxxxxxx , you will see a tab Debug select it and choose, enable debug and debuggable options.
Save the settings.
After it is done, take a restart of the instance. This should help you.
Regards
Rahul

Enabling debug mode for j2ee engine

hi,
I would like to enable the debug mode for my j2ee engine (installed on a remote host)
I followed already the below mentioned steps, but I was not successfull
http://help.sap.com/saphelp_nw04/helpdata/en/ae/40e1407e858031e10000000a1550b0/content.htm
In the NWDS I see always that the Productive Use is enabled (YES). How can I switch this field to NO?
kind regards
Michael

Here the steps...
1.     login to config tool
2.     access serverX node
3.     select debug manu
4.     select all 3 option(checkbox)
                  "DebugMode" -> "yes"
                  "DebugPort" -> "50021"
                  "Debuggable" -> "yes"
5.              restart engine.

Can someone please tell me how to turn OFF Disk Mode on an Ipod Classic?

Can someone please tell me how to turn OFF Disk Mode on an Ipod Classic

Just Reset it like this
Toggle the Hold switch, make sure you dont see the red mark when you do the next step
Reset the iPod -> Press Menu and Center button simultaneously for about 10 secs or till the Apple Logo comes ON
Then release the buttons
Select your preferred language.
Here is the Apple support Article on the 5Rs
http://www.apple.com/support/ipod/five_rs/classic/
Good Luck!

How to turn on debug logging

I'm using OIM 9031 on Oracle Application Server.
I need to turn on debug mode logging while processing reconciliation events.
The problem is that Recon event is in Status 'Received', but when I try to proceed it by clicking 'Create User' button in the Reconciliation Manager, it shows me error 'Mandatory fields are blank or null'. But I can't see the name of fields that are blank, even in logs.

Check $XELLERATE_HOME/config/log.properties and chage log level:
log4j.logger.XELLERATE.SCHEDULER=DEBUG
log4j.logger.XELLERATE.SCHEDULER.Task=DEBUG
and also to DATABASE
log4j.logger.XELLERATE.DATABASE=DEBUG
Check also your reconciliation mapping attributes in Xellerate User
Regards

TS1489 Using Windows 7 but there is no Compatibility Tab in Properties. Any idea how to turn off this mode please.

I am using Windows 7 but when I go into iTunes - then Properties, I cannot find a Compatibilty Tab. Any idea how to turn off this mode please?

I am using Windows 7 but when I go into iTunes - then Properties, I cannot find a Compatibilty Tab. Any idea how to turn off this mode please?

Debug Mode for CustomRealm

( maybe see as well entry #27 in this list)
For debugging / logging from my ( now working) CustomRealm implements DebugableRealm, i tried to set DebugSecurityRealm=true. Starting WL Server gives the behaviour, described in thread 27.
As well instanciating a new LogOutoustream results in runtime Stackoverflow.
The same thing works well wit a custom AuditProvider.
Are there sulutions to this problem ?
Thanks,
Paul

Thanks for the comment. i implmented my own debug file, so i can live with it for now.
Paul
"Suresh Vallabhaneni" <[email protected]> wrote:
>
Hi Paul
Sorry for the late reply. First of all, thank you for uncovering an untested part of ServerDebug MBean. The Debug Mode for Security Realms currently works for fileRealm but doesnot work for alternate realms(e.g., LDAP realm). We're in the process of fixing this in the future releases(may not be Beta Refresh but will definitely be fixed in GA). I'm attaching a working config.xml(with fileRealm) and the only change you've to make to your config.xml is
<Server
<ServerDebug
DebugSecurityRealm="true"
Name="myserver"
/>
</Server>
If you're debugging a fileRealm then I belive, this serves your purpose. But if you're debugging a Security Realm other than fileRealm and this is blocking you, plz let us know so that this will be fixed with a higer priority. Thanks again for uncovering this.Will let you know as soon as this is fixed.
regards
"Paul Hettl" <[email protected]> wrote:
( maybe see as well entry #27 in this list)
For debugging / logging from my ( now working) CustomRealm implements DebugableRealm, i tried to set DebugSecurityRealm=true. Starting WL Server gives the behaviour, described in thread 27.
As well instanciating a new LogOutoustream results in runtime Stackoverflow.
The same thing works well wit a custom AuditProvider.
Are there sulutions to this problem ?
Thanks,
Paul

How can we send read mode for a query..?

How can we send read mode for a query..?
thanks in advance
regards

Hi Chaudhary.
I am not sure I understand your question correct?
Do you want to set a query to read only so it can not be changed? If so you should be controlling this with authorizations.
Hope it helps.
BR
Stefan

How to turn off demo mode in Xeperia Z1

Hi,
How to turn off demo mode in Xeperia Z1, Please help on this.
Solved!
Go to Solution.

You might have a demo unit in that case.Contact your seller.
All we have to decide is what to do with the time that is given to us - J.R.R. Tolkien

How to turn on debug mode for NW 7.3 trial version?

Similar Messages

Maybe you are looking for