How to turn On my send SMS option on Ichat? On my macPro

I'm trying to send sms from my macPro< when i go to file, The option of send sms is gray, I cant click on it, how can I turn it on? so i can send sms?

Not quite what you asked, but you can open an SMS-based conversation with File > New SMS...

Similar Messages

How can I simply re-send SMS from N-device (N70)?

I'm not sure but situation looks quite stupid. I have SMS in "Sent" box and need to re-send it, i.e. send same text to same recipient, but I cannot find any "civilized" way of doing that.
Am I blind or Nokia made this monkey design of SMS options?
I compared with my backup phone (cheap model of Sony-Ericsson) and there I can press Forward - Insert Recepient and then list of phones pops up, including number of original recepient of the message.
Nothing like that is possible in Nokia so-called "smartphone" - I cannot even copy number of recepient to clipboard from SMS message located in "Sent" box. Nokia even does not allow me to move message e.g. to "Drafts" where I could edit it.
Did I miss some simple step? Feel myself confused...
If there are really no way to extract number from Sent SMS and use it in new SMS, may be Nokia engineers could make small pocket on backside of the phone - you know, for small pencil and piece of paper, because it seems the only way to re-use the number.Message Edited by sidream on 31-Jul-200705:04 PM

No problem I can explain if you like:
1) many messages are sent in hurry - somobody dictates you a number and you think what to send - there's simply no time to enter number in address book
2) in general I don't like to enter ANY numbers on telephone in address book at all, Nokia has terrible PIM and calendar (and two-way PC sync), so I prefer to enter all data directly on PC in Outlook, and later sync it to Nokia (but not vice versa). That's separate issue, but also deserves to be mentioned here.
3) there are some service messages with my GSM provider, that have to be sent sometimes - to reset daily limits on incoming web-originated SMS, etc. It would be much easier just to "resend" this message.
4) sometimes my close people whom I ask something by SMS just forget to do what I'm asking, so it's easy just to resend SMS with same content to the same person, just to remind her/him I'm missing reply or action on their side.
More ideas? Enough for me....

How to override confirmation fr sending sms? -urgent-

I made an application that suppose to send an sms automatically. But it always prompts a confirmation question. How to override this? Thank you..

This is a problem not only when sending to the few people without a data plan but for people roaming with their data connection disabled to control costs. Somehow, my iPhone can tell the other phone is an iPhone even with no data connection and tries to send an iMessage. It would be nice to be able to send a text message right away instead of waiting for the iMessage to fail or perhaps failing to notice that the "Delivered" notice did not appear.

How select multiple contacts to send SMS using nok...

I want to send a SMS to multiple contacts (suppose 100/150) at a time,how can do it by single click?I tried it from nokia ovi suite but I can't do that.i can't create a groups to create a group in nokia ovi suit & how to send single SMS to that group by one click?How to make a phn call from my PC through my x5?
Solved!
Go to Solution.

If you have created 'GROUPS' on your phone..Sync the Contacts with the OVI Suite..Then in Messaging-->In the Right window under 'Add Recipient'..Pull Down menu.. you will see the Groups listed at the end of the list...
As far as Making Call thru' OVI Suite.. thats not possible I think..

How to turn off Require Sender Authentication in on premises AD?

My client has Exchange Online and Office 365 with on-premises AD server. They just realized that a distribution group is set in Exchange Online to only allow email from internal users. When I tried to turn that off, I get the message below.
The action 'Set-DistributionGroup', 'RequireSenderAuthenticationEnabled', can't be performed on the object 'Operations' because the object is being synchronized from your on-premises organization. This action should be performed on the object
in your on-premises organization
Where in AD do I adjust this so the DL can receive external email? I assume it is in the ADSI edit tool, but I do not know which attribute.
Thanks!
Charlie
Plexus IT
Charlie O'Hearn http://www.plexus-it.com

The action 'Set-DistributionGroup', 'RequireSenderAuthenticationEnabled', can't be performed on the object 'Operations' because the object is being synchronized from your on-premises organization. This action should be performed on the object
in your on-premises organization
Hi Charlie,
This error message occured when the DG is synced from on-premieses via DirSync, can only be changed from on-premises.
Please follow steps below:
1. Went to the properties of the DG, on-premises, via ADSIEdit.
2. Changed the msExchRequireAuthToSendTo from False to True.
3. Ran a sync with DirSync(Start-OnlineCoexistenceSync).
Since Office 365 is different from Exchange On-Premises, I still suggest ask Office 365 Forum to double confirm this issue so that you can get more professional suggestions. For your convenience:
http://community.office365.com/en-us/default.aspx
Thanks
If you have feedback for TechNet Subscriber Support, contact
[email protected]
Mavis Huang
TechNet Community Support

How to define multiple recipents for send mail option

Dear all,
I am trying to send mail to multiple recipients. can some help me with a solution as we donot have orgnizational chart maintained in our organization.
also
is there some study material for how to use expression in send mail option
thanks in advance.
Best of regards,
Gaurav Sood

I don't know if there is a comparable FM like SO_USER_READ_API1 that uses a table for SOUDNAMEI1. I simply create a table of SOUDNAMEI1, loop SO_USER_READ_API1 adding to recipients and then SEND.
This what you referring to?
if there is a comparable FM, let me know. I don't 'see' any in package SO's FGs.
Rick

SMS option is greyed out.

I cannot seem to send sms from my iChat. In my File menu, SMS option is greyed out. Does anybody else have this problem. I also tried adding a to my phone number contacts. that did not solve my problems.

Hi
To Explain this Picture.
It is the Pop when you go to the iChat > File Menu SMS (When it is not Greyed Out)
To get that item to be active you have to have the Computer set as if it is in the United States
This is set in System Preferences > International in versions Snow Leopard or Earlier.
It is called text and Something in Lion on the top row of panes.
The Format Tab is the one that has to show the United States.
The Phone Number has to be in the United States as this is the only place AIM Offer the service.
What they don't make quite so clear is that the Phone Service also has to be linked to the AIM SMS Forwarding service.
8:46 PM Sunday; August 21, 2011
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb( 10.6.8)
 Mac OS X (10.6.8),
"Limit the Logs to the Bits above Binary Images."  No, Seriously

I can't send SMS text from iPad 4 w/ cellular, no option to add or turn off/on

I can no longer send SMS text with IPad 4 w/ cellular. There is no option in settings-messages to turn on SMS like on iphone5. Everything is trying to be sent iMessage which fails when sending text to non apple users. This change occurred after last iOS update.

I can confirm this for the Ipad Mini with iOS6.1
Although the cellular hardware is available - the iPad doesn't handle SMS Text messages.
For those trying to use prepaid 3G internet data simcards, not being able to send or receive text messages pretty much cripples most 3G prepaid internet simcard packages available around the world.
Follow this issue here: 3G prepaid internet in the iPad Mini

Why does Messages still send my txt via SMS when I have the "send as SMS" option turned off?

Why does Messages still send my txt via SMS when I have the "send as SMS" option turned off?

I haven't missed any point, but you don't get it.
If people take "Send as SMS" being turned off as the iPhone shoiuld not be sending SMS messages without reading this text that is included below the option:
Send as SMS when iMessage is unavailable. Carrier messaging rates may apply.
They are idiots.
But you're saying you have this other piece of information that tells you that this option only applies to two iphones exchanging txt. Where did you obtain such information?
Copied from my previous post.
Under the Send as SMS option, the following is available:
Send as SMS when iMessage is unavailable. Carrier messaging rates may apply.
You should check available text below an option such as this so you know what it does.

How do I send SMS only at ALL TIMES with an iPhone to ALL contacts? My family shares iPads under my ID and now my teenager gets all my business texts!

How do I send SMS only at ALL TIMES with an iPhone to ALL contacts? iOS 8 now forces all Apple users to use iMessage all the time with all other iOS users. The option to send as SMS only is subordinate to iMessage in iOS 8 settings and CANNOT be turned off to send only SMS texts to another iOS device! This is a serious privacy issue for all households using iOS and doing family sharing, including over a number of iOS devices, under one member's Apple ID. Why should business conversations or financial conversations between parents be readable on an iPad in the hands of a teenager or a seven year old? The answer is not as simple as "Just don't enable iMessage on your other devices," because amy family that shares the Apple ID password is vulnerable to teenagers particularly hacking into iMessage to monitor, for example, what their parents are saying. If I were Samsung or Google I would hammer this issue immediately and continually until it is fixed by Apple (and I'm not sure why they haven't yet). iMessage is a convenience but it has this serious limitation given the architecture of the Apple universe. Apple simply cannot force all its users to conduct text messaging in arbitrarily limited way, any more than it was able to force all its users to switch from Google Maps. When will Apple fix this?

Trademann wrote:
Fox, that does not work, because then you are blocked from sending any form of message to another Apple user. iMessage MUST be activated to text any other iOS device. And then Apple defaults by ALWAYS using iMessage between iOS devices.There is simply no way, within iOS 8, to send SMS only to another Apple user. Apple has made that impossible.
The SMS-only choice used to be on the same menu level as iMessage, but now it is locked WITHIN iMessage, and is not available as a choice unless iMessage is activated. Then it is limited solely to being used if iMessage is not available.
I'm sure their argument is that they are saving their customers money because iMessage is free, but they are imposing an opportunity cost on 100 percent of their user base in the guise of saving that money. What they are really doing is entrapping faithful users such as myself further within the Apple ecosystem. If I hadn't already spent thousands of dollars on my iTunes library I might consider a Galaxy ... Samsung does not deserve to regain any momentum if they can't figure out how to exploit this.
Turning off iMessage does not prevent you from sending messages to other Apple users. You can send an SMS to any iPhone without your own iMessage turned on, even if it is turned on on their iPhone.
The SMS-only option is: Turn off iMessage. Literally. That's it.

How to send SMS by using ABAP program

HI Gurus,
I need to notify the vendor through sms when his goods are received. His details are stored in vendor master.
My problem is that I am not able to find any function module for the same.
Do any of you know how to send 'sms' to particular mobile number using ABAP.
Are there any basis settings required for the same?
Thanks and Regards,
Saurabh

Hi,
Pls check the below links
http://help.sap.com/saphelp_nw04/helpdata/en/58/97c43af280463ee10000000a114084/frameset.htm
/people/ronen.fox/blog/2007/12/06/sending-sms-notification-via-business-workflow
http://www.****************/Tutorials/Workflow/Workflow.htm
You can use the FM: 'SO_DOCUMENT_SEND_API1' &
'SO_DOCUMENT_SEND_API1_NEW'.
to send the mail,sms etc.
But you have to make some chamnges in the reciever table, jus go thru FM documnetaion once, you will fine the option for sending SMS thru either of this FM.
Below is a sample code for sending e-mail.
so, u can take help from this.
data declarations
DATA : v_sender TYPE soextreci1-receiver,
v_doc TYPE sodocchgi1,
it_paklist TYPE STANDARD TABLE OF sopcklsti1 ,
wa_paklist TYPE sopcklsti1 ,
it_obj_head TYPE STANDARD TABLE OF solisti1 ,
it_obj_bin TYPE STANDARD TABLE OF solisti1 ,
it_obj_txt TYPE STANDARD TABLE OF solisti1 ,
it_obj_rcv TYPE STANDARD TABLE OF somlreci1 ,
wa_obj_rcv TYPE somlreci1 ,
v_desc(100).
CONSTANTS: c_start(12) TYPE c VALUE '000000000000001',
c_num(12) TYPE c VALUE '000000000000002',
c_num1(12) TYPE c VALUE '000000000010030',
c_raw(3) TYPE c VALUE 'RAW',
c_test(4) TYPE c VALUE 'TEST',
c_X(1) TYPE c VALUE 'X'.
refresh internal tables
REFRESH : it_paklist, it_obj_rcv.
clear internal tables
CLEAR : it_paklist, it_obj_rcv, v_sender.
v_sender = sy-uname.
fill internal table it_paklist
wa_paklist-head_start = c_start.
wa_paklist-head_num = c_num.
wa_paklist-body_start = c_start.
wa_paklist-body_num = c_num1.
wa_paklist-obj_name = c_test .
wa_paklist-doc_type = c_raw .
wa_paklist-transf_bin = c_X .
APPEND wa_paklist TO it_paklist.
clear: wa_paklist.
Data in the Header/subject Line
v_desc = text-005 .
v_doc-obj_name = c_objname .
v_doc-obj_descr = v_desc.
Mail text
APPEND v_desc TO it_obj_txt.
Preparing the receiver list
wa_obj_rcv-rec_type = 'U'.
wa_obj_rcv-rec_type = 'C'.
v_dlist = 'SCE_TEST'.
wa_obj_rcv-receiver = v_dlist. "Distribution list.
wa_obj_rcv-receiver = Enter the mail id .
APPEND wa_obj_rcv TO it_obj_rcv.
Call the function module to send mail
IF NOT it_obj_rcv[] IS INITIAL.
CALL FUNCTION 'SO_DOCUMENT_SEND_API1'
EXPORTING
document_data = v_doc
sender_address = v_sender
sender_address_type = 'B'
put_in_outbox = 'X'
commit_work = 'X'
TABLES
packing_list = it_paklist
object_header = it_obj_head
contents_bin = it_obj_bin
contents_txt = it_obj_txt
receivers = it_obj_rcv
EXCEPTIONS
too_many_receivers = 1
document_not_sent = 2
document_type_not_exist = 3
operation_no_authorization = 4
parameter_error = 5
x_error = 6
enqueue_error = 7
OTHERS = 8.
IF sy-subrc NE 0.
MESSAGE text-006 TYPE 'I' .
ENDIF.
ENDIF .

HT1614 How come I can't see "Nike+" option in itunes when I plug in my iphone? I have it turned on in my iphone and have work out data in it.

How come I can't see "Nike+" option in itunes when I plug in my iphone? I have it turned on in my iphone5 and have work out data in it.

Hello Kanji0513,
Thank you for using Apple Support Communities
I found this bit of info about the way Nike+ works on the iPhone and iPod Touches versus the way it works with other model iPods.
Your iPod touch or iPhone 3GS or later wirelessly sends workout data to nikeplus.com from wherever you are on the road. So right after your run, you can track your progress and analyze your performance. If you walk or run with iPod nano, workout data is sent to nikeplus.com when you connect it to your Mac or PC.
From: http://www.apple.com/ipod/nike/sync.html
The option in iTunes only appears if you are not using an iPod Touch or iPhone.
All the best,
Sterling

How do i send sms messages from my mac to a phone

the gurl from apple said i could send sms messages from my imac to a phone. How do i di that?

Hi Lanny,
Actually those two pics don't tell you what you need to know.
The First is correct as it can be from the Messages app but the second goes to no way to tell you how to do and b fact does not even mention SMS messages.
@ 10411
You will need to have an AIM or AIM Valid name that you can add to the Messages > Preferences > Accounts at the + icon below the list.
Next the Mac need to be in the United States.
Go to System Preferences > Language and Text and set the Region to the Untied States.
(In iChat this added SMS items to some of the Menus in iChat)
The iPhone has to be on a Carrier that is in the United States See list
Which in turn means the phone number is a United States one (+1 country code)
This means you add the Cell/mobile number as if it were a Buddy to an AIM list.
So Creating an Address Card for "SMS Test" and adding the mock number +1234567890 to that I get this in Messages (Mousing over the Name to see the "Screen Name" which is the number in this case)
Basically this is a feature that iChat has always had since AIM included a link to SMS to certain Phones.
Messages does everything iChat did/does and this includes SMS Messaging via an AIM Buddy list even though in this case the Menu items has disappeared.
AS has been said there are also other methods.
8:24 PM Saturday; April 6, 2013
 iMac 2.5Ghz 5i 2011 (Mountain Lion 10.8.3)
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb (Snow Leopard 10.6.8)
 Mac OS X (10.6.8),
 Couple of iPhones and an iPad
"Limit the Logs to the Bits above Binary Images."  No, Seriously

How to send sms from iPad via iphone

How to send sms from iPad via iphone?

You don't easily.
The pad, with I message turned on, will send text like messages to any other ios5 user that has I message turned on.
The pad is not a phone, and does not have the radio to send 'real' SMS messages, which use the phone channel.
There are a few apps in the store that will convert messages to SMS, for use with non apple folks. Check out the app store. Search SMS.

How to send SMS from JSP application.

Hi,
I have created a web application using JSP for our Office internal use. I want to include the folowing option in our app.
1) How to send SMS from the application to mobile.
2) I don't want to use third party service (ex: SimpleWire). as the app is for internal purpose only.
It will be helpful, if I get the complete procedure to implement it, as this is my first application.
Thanks & Regards
suresh.

I am having problem with smslib. smslib is an enhanced version of jsmengine, I have compiled the program, there is no error but when I run it , the following error is found. Can you help? my email is [email protected]
Exception in thread "main" java.lang.NoClassDefFoundError: CIncomingMessage (wrong name: org/smslib/CIn
comingMessage)
at java.lang.ClassLoader.defineClass1(Native Method)
at java.lang.ClassLoader.defineClass(ClassLoader.java:620)
at java.security.SecureClassLoader.defineClass(SecureClassLoader.java:124)
at java.net.URLClassLoader.defineClass(URLClassLoader.java:260)
at java.net.URLClassLoader.access$100(URLClassLoader.java:56)
at java.net.URLClassLoader$1.run(URLClassLoader.java:195)
at java.security.AccessController.doPrivileged(Native Method)
at java.net.URLClassLoader.findClass(URLClassLoader.java:188)
at java.lang.ClassLoader.loadClass(ClassLoader.java:306)
at sun.misc.Launcher$AppClassLoader.loadClass(Launcher.java:268)
at java.lang.ClassLoader.loadClass(ClassLoader.java:251)
at java.lang.ClassLoader.loadClassInternal(ClassLoader.java:319)

How to turn On my send SMS option on Ichat? On my macPro

Similar Messages

Maybe you are looking for