How to turn on the text suggestion in the adress bar?

Firefox doesn't give me any text suggestion when I type in the adress bar... It was working fine before the last update I believe...
How can I turn it back on?

Make sure that the Location Bar is not set to "Nothing":
* Firefox/Tools > Options > Privacy > Location Bar: When using the location bar, suggest: History, Bookmarks, History and Bookmarks
* https://support.mozilla.com/kb/Location+bar+autocomplete

Similar Messages

Does anyone actually like the texting suggestions on the IOS8 update?

I Really think the texting suggestions are irritating and I don't use them anyway. Get rid of them.. Is there any way that I can get rid of this update?

To make the rubberbands less sensitive, you can hold cmd to slow down the speed of dragging. This is especially necessary for using with a wacom which is really awful with Premiere Pro. I will occasionally use the rubberbands for opacity or volume, but I too am annoyed by them sometimes. However, I am also annoyed by adjust volume or opacity in the effects control panel which has keyframes set by default. Stupid.
I am also annoyed that you can't change the setting for what type of rubberband shows by track. It makes editing keyframes in the timeline more or less useless. If I want to see position keyframes for 100 clips on the same track, I have to change the setting 100 times. Much easier at that point to do it in the Effects control window.

Why Acrobat x professional is changing the text formatting specifically the font family and the font size of the text in my pdf on exporting it to Microsoft word file format ?How should i stop Acrobat x professional from doing that so that i get an exact

Why Acrobat x professional is changing the text formatting specifically the font family and the font size of the text in my pdf on exporting it to Microsoft word file format ?How should i stop Acrobat x professional from doing that so that i get an exactly same word file on exporting it from its pdf counterpart?

I was testing the preciseness & efficiency of Adobe acrobat x professional's doc conversion capabilities. As i have to take a document editing project in future which is going to need lot of pdf to word and vice versa conversions . What I did was I created a test word document converted into a pdf using a pdf maker in my word 2007 , Acrobat did convert the document from word to pdf keeping everything in the source file intact , However when i tried the other way round and attempted to convert the same pdf to word 2007 file format I lost my formatting ?So the font that I used to create the pdf are the ones taken from word 2007 which i believe is using the fonts that are installed in my computer. Any suggestions on how to preserve the formatting of the document after converting it from pdf to word file format?
Regards
Mike

How do you hide incoming text messages on the iphone 4 to just show the name of the person sending the text instead the entire text message?

How do you hide incoming text messagtes on the iphone 4. I can do on the 3G. Can it be done on the 4?

Settings>Notifications>Messages. Turn Show Preview to off.

How do I forward a text message with the iPhone?

How do I forward a text message with the iPhone?

You could take a screen shot (hold and release both buttons simultaneously) and then email the resulting image to someone.
// crude workaround for now...

How can I get the "text" field from the actionEvent.getSource() ?

I have some sample code:
import java.awt.*;
import java.awt.event.*;
import javax.swing.*;
import java.util.ArrayList;
public class JFrameTester{
     public static void main( String[] args ) {
          JFrame f = new JFrame("JFrame");
          f.setSize( 500, 500 );
          ArrayList < JButton > buttonsArr = new ArrayList < JButton > ();
          buttonsArr.add( new JButton( "first" ) );
          buttonsArr.add( new JButton( "second" ) );
          buttonsArr.add( new JButton( "third" ) );
          MyListener myListener = new MyListener();
          ( (JButton) buttonsArr.get( 0 ) ).addActionListener( myListener );
          ( (JButton) buttonsArr.get( 1 ) ).addActionListener( myListener );
          ( (JButton) buttonsArr.get( 2 ) ).addActionListener( myListener );
          JPanel panel = new JPanel();
          panel.add( buttonsArr.get( 0 ) );
          panel.add( buttonsArr.get( 1 ) );
          panel.add( buttonsArr.get( 2 ) );
          f.getContentPane().add( BorderLayout.CENTER, panel );
          f.setDefaultCloseOperation( JFrame.EXIT_ON_CLOSE );
          f.setVisible( true );
     public static class MyListener implements ActionListener{
          public MyListener() {}
          public void actionPerformed( ActionEvent e ) {
               System.out.println( "hi!! " + e.getSource() );
               // I need to know a title of the button (which was clicked)...
}The output of the code is something like this:
hi! javax.swing.JButton[,140,5,60x25,alignmentX=0.0,alignmentY=0.5,
border=javax.swing.plaf.BorderUIResource$CompoundBorderUIResource@1ebcda2d,
flags=296,maximumSize=,minimumSize=,preferredSize=,defaultIcon=,disabledIcon=,
disabledSelectedIcon=,margin=javax.swing.plaf.InsetsUIResource[top=2,left=14,bottom=2,
right=14],paintBorder=true,paintFocus=true,pressedIcon=,rolloverEnabled=true,
rolloverIcon=,rolloverSelectedIcon=,selectedIcon=,text=first,defaultCapable=true]
I need this: "first" (from this part: "text=first" of the output above).
Does anyone know how can I get the "text" field from the e.getSource() ?

System.out.println( "hi!! " + ( (JButton) e.getSource() ).getText() );I think the problem is solved..If your need is to know the text of the button, yes.
In a real-world application, no.
In a RW application, a typical need is merely to know the "logical role" of the button (i.e., the button that validates the form, regardless of whether its text is "OK" or "Save", "Go",...). Text tends to vary much more than the structure of the UI over time.
In this case you can get the source's name (+getName()+), which will be the name that you've set to the button at UI construction time. Or you can compare the source for equality with either button ( +if evt.getSource()==okButton) {...}+ ).
All in all, I think the best solution is: don't use the same ActionListener for more than one action (+i.e.+ don't add the same ActionListener to all your buttons, which leads to a big if-then-else series in your actionPerformed() ).
Eventually, if you're listening to a single button's actions, whose text change over time (e.g. "pause"/"resume" in a VCR bar), I still think it's a bad idea to rely on the text of the button - instead, this text corresponds to a logical state (resp. playing/paused), it is more maintainable to base your logic on the state - which is more resilient to the evolutions of the UI (e.g. if you happen to use 2 toggle buttons instead of one single play/pause button).

How can I make a table cell extend beyond the page? The text disappears when the cell becomes larger than the page.

How can I make a table cell extend beyond a page? The text disappears when the cell becomes bigger than the page. I want the table to continue to the next page.

As a student, you might be able to get Office for Mac from the college bookstore at a substantial discount. Otherwise, I think your best option for documents that need to be shared with Office users is to get one of the free Office clones such as LibreOffice.

How to use the separate symbol in the text field in the adobe form.

Hi,experts,
I dont know how to use the separate symbol to make a paragraph separate into several lines correctly in the text field in the adobe form.
Action:
1. config the ADS successfully.
2. create the adobe form with a mult-line textfield(binding the 'remark' context in the interface of the form) using sfp.
3. create a WDA for invoke the form and transfer the 'remark' context data.
I use the following codes to display the paragraph in the PDF document:
CONCATENATE
'1、aaaaaaaaaaa；'
'2、bbbbbbbbb '
'3、ccccccccccc'
'4、ddddddddd'
INTO remark .
lo_nd_z_hr_php_payslip->set_attribute(
EXPORTING
name = `REMARK`
value = remark ).
But I found all the content aren't paragraph separate correctly in the text field in the adobe form when I run the WDA.
Could you please give me some hints to make the paragraph separate correctly in PDF document? Thanks a lot in advance!
My email is : [email protected]
Best regards,
Tao
Edited by: wang tao on Apr 8, 2008 1:58 AM

Hi,
If it is just a one word value then you could use this in the exist event;
this.rawValue
= util.printx(">?<*",this.rawValue);
This changes the first character (represented by the ?) to uppercase (represented by the >) and all trailing characters (represented by the *) to lowercase (represented by the <).
If you wanted something more general ... if they could also enter a middle name then you could call a function like;
function toTitleCase(textValue)
return textValue.toLowerCase().replace(/\b[a-z]/g, function replacer(match) { return match.toUpperCase(); });
This uses a regex to change all lowercase letters following a word boundary to uppercase.
Bruce

This is my first use of this program. How do I remove a page break? How do line up my drop down box along side the text box on the left of it? The drop down is for a multiple choice answer for the question to the left.

This is my first use of this program. How do I remove a page break? How do line up my drop down box along side the text box on the left of it? The drop down is for a multiple choice answer for the question to the left of each drop down.

See McAfee support to find out how to disable that McAfee feature - that isn't part of the normal Firefox installation.

How can i pin a text box to the bottom of a VBOX

Hi,
Thank you in advance for your time, the question is how do i pin a text box to the bottom of a VBox, i dont know what code to add kindly help me out. The code i have with me is
VBox {
translateX: 10
translateY: 10
spacing: 20
content: [
Label {
text: "TextBox:"
TextBox {
layoutInfo: LayoutInfo { minWidth: 100 width: 150 maxWidth: 200 }
] //contents
//VBox
now the text box has to go to the bottom of the VBox even if the VBox has other objects or if its resized.
Regards,
Kibu

Vbox, acts much like a linear layout like in other languages.
Just keep your declared textbox at the bottom of your content (content :[] ), then the text box will continue to get pushed further down your view, as you add other controls to your content.
layoutX and layoutY will just increase your spacing from the previous declared control in that content.

Am new at pages and cannot figure out how to insert a bullet where I want it in the text, not at the beginning of the paragraph. Word was much easier for me

Am new at this forum and also at pages and can't figure out how to insert a bullet where I want it in the text, not at the beginning of the paragraph. I found word much easier to use. Please help. Trying to do a resume.

On a US keyboard it is Option + 8 (above the letters). •

How to find the text id for the text in the sales order

Hi all,
How to find the text id for the item-text in the sales order?
There are different Text available in the sales order under item like Warehouse instruction, CSR instruction...
I want to know the corresponding Text id for the text ELECTRONIC ORDER COMMENT.
Table TTXID contains the validation of the Text id.
Please help me in knowing the way to identify the text-id from the text list..
Thanks foryour help
Suresh Kumar

U can fetch the texts for the items using
Read_text.
Example:
    g_f_tdname = xvttp-vbeln.
    g_f_obj = p_obj.
    g_f_langu = 'DE'.
    REFRESH g_t_lines.
    CLEAR g_t_lines.
    CALL FUNCTION 'READ_TEXT'
         EXPORTING
              id                      = p_var
              language                = g_f_langu
              name                    = g_f_tdname
              object                  = g_f_obj
         TABLES
              lines                   = g_t_lines
         EXCEPTIONS
              id                      = 1
              language                = 2
              name                    = 3
              not_found               = 4
              object                  = 5
              reference_check         = 6
              wrong_access_to_archive = 7
              OTHERS                  = 8.
    IF sy-subrc <> 0.
     MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
             WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
    ENDIF.
The Required fields are,
Text-id ,language,name,object.
Let me know if you further require help.
Regards

How to find out all the text elements in the report using Java?

How to trace the contents of an rpt file?
I am able to open the rpt file in my report viewer but can not trace it using the JAVA code.
Actually, I need to find out all the text elements of rpt (Report) file and replace them with the contents of resource bundle.
My Java code to open a report is given below:
import com.crystaldecisions.reports.sdk.ISubreportClientDocument;
import com.crystaldecisions.reports.sdk.ParameterFieldController;
import com.crystaldecisions.reports.sdk.ReportClientDocument;
import com.crystaldecisions.sdk.occa.report.data.ConnectionInfo;
import com.crystaldecisions.sdk.occa.report.data.ConnectionInfos;
import com.crystaldecisions.sdk.occa.report.data.Fields;
import com.crystaldecisions.sdk.occa.report.data.IConnectionInfo;
import com.crystaldecisions.sdk.occa.report.data.ParameterField;
import com.crystaldecisions.sdk.occa.report.data.ParameterFieldDiscreteValue;
import com.crystaldecisions.sdk.occa.report.data.Values;
import com.crystaldecisions.sdk.occa.report.lib.IStrings;
import com.crystaldecisions.sdk.occa.report.lib.PropertyBag;
import com.crystaldecisions.sdk.occa.report.lib.PropertyBagHelper;
import com.crystaldecisions.sdk.occa.report.lib.ReportSDKException;
import com.crystaldecisions.sdk.occa.report.reportsource.IReportSource;
public String viewRpt()
               //1.) Setting Database Infos
                        IConnectionInfo iConnectionInfoObj=setDatabaseConnectionInfos();
               //2.) Setting Report Path
               String reportPath=u201DE:
was60
rptFilesLocation
u201D;
               reportPath=(reportPath!=null)?                                             reportPath:AppConstants.CONSTANTS.BLANK;
               String reportName="report1.rpt";
               String reportFullPath = reportPath +   rptName;
             //3.) Setting Report Source
                         ReportClientDocument reportClientDoc = new ReportClientDocument();
                                          reportClientDoc.open(reportPath, 0);
              IReportSource reportSource = reportClientDoc.getReportSource();
              setReportSource(reportSource);
              reportClientDoc.close();
          //4.) Setting the Fields Starts
          setFieldsCrystal(null);
          Fields fields = new Fields();
          ParameterField pfield1 = new ParameterField();
          Values vals1 = new Values();
          ParameterFieldDiscreteValue pfieldDV1 = new ParameterFieldDiscreteValue();
          pfield1.setName("@parameter1");
          pfieldDV1.setValue(u201Cvalue1u201D);
          vals1.add(pfieldDV1);
          pfield1.setCurrentValues(vals1);
          fields.add(pfield1);
          pfield1 = new ParameterField();
          vals1 = new Values();
          pfieldDV1 = new ParameterFieldDiscreteValue();
          pfield1.setName("@parameter2");
          pfieldDV1.setValue(u201Cvalue2u201D);
          vals1.add(pfieldDV1);
          pfield1.setCurrentValues(vals1);
          fields.add(pfield1);
          setFieldsCrystal(fields);
          //Setting the Fields Ends
The sample jsp code to view the report is as follows:
<%@taglib uri="http://www.businessobjects.com/jsf/crystalreportsviewers"
     prefix="bocrv"%>
<bocrv:reportPageViewer viewerName="CrystalViewer"
                                             reportSource="#{CrystalReportBeanObject.reportSource}"
                                             displayToolbarRefreshButton="false"
                                             allowDatabaseLogonPrompting="false"
                                             allowParameterPrompting="false"
                                             databaseLogonInfos="#{CrystalReportBeanObject.connectionInfosCrystal}"
                                             parameterFields="#{CrystalReportBeanObject.fieldsCrystal}"
                                             displayGroupTree="false" displayToolbarLogo="false"
                                             displayToolbarToggleTreeButton="false"
                                             enablePageToGrow="false" height="540"
                                             zoomPercentage="100" width="750"
                                             allowDrillDown="false"
                                             displayToolbarPrintButton="true"
                                             printMode="PDF"
                                             ></bocrv:reportPageViewer>
Edited by: JayKumarSharma on Mar 23, 2011 12:42 PM

This is how you retrieve all the text fields in the reort:
ReportObjects reportObjects = (ITextObject) oReportClientDocument.getReportDefController().getReportObjectController().getReportObjectsByKind(ReportObjectKind.text);
for(int i=0; i< reportObjects.size();i++)
ITextObject textObject = (ITextObject)reportObjects.get(i);
// use ReportObjectController to modify the text object.
If you want to modify the contents of the text element, you can do it as follows:
TextObject oTextObject = new TextObject();
Paragraphs oParagraphs = new Paragraphs();
Paragraph oParagraph = new Paragraph();
ParagraphElements oParagraphElements = new ParagraphElements();
ParagraphTextElement oParagraphTextElement = new ParagraphTextElement();
oParagraphTextElement.setText("This is the new text field");
oParagraphTextElement.setKind(ParagraphElementKind.text);
oReportClientDocument.getReportDefController().getReportObjectController().modify(textObject, oTextObject);
oReportClientDocument.save();

How do you change the text font on the Droid Global Phone

How do you change the text font on the Droid Global Phone. I would like it to be darker (like bold)

Hi.
Below I have provided you with the steps to change your font settings.
From the main menu
Select Settings
Select Display Settings
Select Font Style
You can select from what is available,
Or you select [Get Fonts Online] to find something you want.
Thank you,

I had set my passcode by pressing 1 repeatedly till it filled the passcode box. I dont know how many times I have pressed 1. Can someone tell me the character length of the text box of the Passcode

Hi,
My son foolishly pressed a single digit till it just filled the text box of the passcode. Now i dont know how many times he has pressed it. If I can know the charcter length, or how many digits can just fill the text box of passcode, I can unlock my ipad2. If anyone reading this has ipad2, he can do the same thing and count how many digits will just fill the text box. I will really appreciate the help.
Thanks

You can put the iPad into Recovery mode and Restore it. See this link and note the sentence commencing, 'If you restore from a different computer.... ' down near the bottom of the page.
http://support.apple.com/kb/HT1808

How to turn on the text suggestion in the adress bar?

Similar Messages

Maybe you are looking for