How to turn OpenGL for PS CS4 in Windows 7 ?

Does anyone know how to permanently turn off Open GL for PS CS 4 in Windows 7 ?
I am trying so called "plugins" available here http://www.adobe.com/support/downloads/detail.jsp?ftpID=4056 which essentially are registry entries - however after running it I look into the registry and can't find the key that is supposed to be inserted from .reg file...
Reason I am asking is I am still experiencing problem that I believe are Open GL related - Open GL is already turned off in PS CS4 preferences and I have checked lots of GPU drivers including most recent week-old beta.

From what Adobe written in the KB that refers that registry entry, I concluded that you can turn Open GL somewhat more using that registry input that just by unchecking the box in the preferences. Sure I have updated to 11.01.As for the driver - PS seems to be only application that has problems with it, I run bunch of games (inluding Modern Warfare), some stability testing heating up the GPU (including Furmark that uses Open GL) and everything was fine, but causes a system hang-up after moving from ACR to PS that starts with artifacts first - it does not happen every single time but frequently enough. With Open GL turned on in prefs, it happens each time...

Similar Messages

How to turn off "re-open all application windows"

How to turn off "re-open all application windows". Even though its unselected in preferences. my computer still tries to do this and causes startup problems and delays. its been a hangup since lion. when are they going to fix this???

Try this. . .
You have two choices. You can choose that your applications not resume their previous state when you shutdown or restart the Mac by deselecting the checkbox that appears prior to shutdown:
Or you can navigate to the General pane in System Preferences and deselect the Restore windows when quitting and re-opening apps option. However, if you do this, applications will never resume their previous state, even when quit and restarted during a single boot session.

How to turn off volume adjustment sound under Windows 7

Hey all,
I'm running Windows7 x64 on an Intel iMac (July 2010 revision).
Things are running well for the most part. However, I am unable to find a way to turn off the blooping sound played when adjusting the volume in Windows 7 (I know how to turn it off in OS X). I have tried turning off all system sounds under Windows,but the volume adjustment sound still plays. Does anyone know how to turn this off? I find it jarring. I would appreciate any help that anyone can give.
Thanks.

That too bad because I use the MBP to do my radio show and it's very annoying. I know you can turn it off on the mac side.

How to disable UAC for standard account in windows 8.1 single language OS

Hi,
How to Disable UAC in a standard account on windows 8.1 single language OS.
application for mobile modem (TATA DOCOMO) always asks for administrator password, in windows 7 I used to just set UAC never Prompt in admin account and same setting would reflect in standard user account and then users where not prompted for password but in
windows 8.1 single language edition I have disabled UAC in admin account but in standard account the setting for UAC was still in default (notify me when programs try to make changes to my computer), if I try to set never, the ok button is greyed out with
message saying that you must be logged in as administrator.
And Group policy editor, local security policy are not available in windows 8.1 single language.
can any one give command to disable UAC using CMD.
OR
set registry to not prompt for admin password.
Thanks in advance..........

Hi Ed,
But in control panel -> user accounts -> Change user account control settings
I can set the settings to always notify
and default notify when programs try to make changes to computer.
But I can't set it to never prompt because only administrator as power to do that and if I set never prompt in administrator account the settings in standard user remains in
always notify.
so please let me know, if there is any other way to over come the problem.
Main problem is application from unknown source always prompt for admin password.
I need to disable it from prompting for admin password to run applications in standard accounts.

How to turn off the Charms Bar in Windows 8.1

I have a new HP laptop with Windows 8.1. I absolutely HATE the charms bar. It's very annoying. I have turned off the corner function so the Charms bar no longer pops up if I swipe the corner edges, however, it still pops up randomly. I'll be typing along and it'll just pop up, blocking whatever I'm working on.
I have absolutely no need for this charms bar. In fact, the only thing I've used it for is to get to the option to turn them off. However, on this laptop, that doesn't completely turn them off.. I have tried going to the mouse control panel to turn them off, but that option isn't offered. However, I don't think it's the mouse pad causing them to pop up anyway.. I'll be typing along, not even touching the mouse pad, and they'll just suddenly pop up.
What is the cause of this and how can I get rid of it? I'm getting rather desperate and at times feeling the need to throw this laptop out the window!!! I much preferred my HP Windows XP laptop, and only replaced it because XP is no longer supported.. Window's 8.1 is one of the most frustating systems Microsoft has come up with.
Please help me to turn these dang things off for good!!
UPDATE: I think I found the solution. I received this link from a Microsoft Chat Line Employee. I followed the directions and the charms seem to be gone.. YAHOO...
Here's the link:
http://winaero.com/blog/how-to-disable-the-edge-panels-charms-bar-and-switcher-in-windows-8/
UPDATED UDATE: lol... I posted this below, but will repost here.. The solution given to me by the Microsoft Chat Line employee did not work.. Well, it worked for one day, I shut it down for the night, and when I turned it back on in the morning, the charms were back with a vengence.. Seriously, worse than ever before, popping out constantly. It was like they were really pissed off...
I went to Wally World and bought a $16 wireless mouse, which is keeping the charms at bay.. I actually think it's easier to use than the mouse pad on my laptop anyways. I can use it on the arm of my recliner, on my laptop next to the mouse pad, on a desk top (obviously), but the point being, unless I run the cursor to the very extreme right side of my screen, the charms have remained hidden...
I have a business website, and while working on it, the charms were constantly popping up as I was trying to add pictures and descriptions. It was seriously driving me out of my mind.. Everything was taking me twice as long to add, time I don't have to waste.. I've been working on it this morning using the wireless mouse and the charms bar has not popped out once..
This question was solved.
View Solution.

For anyone who came here looking for the same solution, I finally did find one that seems to have worked..
I got this link from a Microsoft chat line employee. I followed the directions and the charms have not appeared for quite some time now.. Here's the link:
http://winaero.com/blog/how-to-disable-the-edge-panels-charms-bar-and-switcher-in-windows-8/
Good luck to everyone trying to get rid of them.. They are one VERY annoying feature of Windows 8 and Windows 8.1

Previewing imported bitmaps for Illustrator CS4 using Windows XP

Hi all
Can anyone tell me if it is possible to preview a bitmap while importing it into Illustrator CS4 (File>Place). I am using Windows XP SP3 and I know you can see a preview on bitmaps with the Mac version.
Any help much appreciated.
Thanks
George

Some general comments (when I used CS3 and WinXp I did not have any problems, now I am on Win7 64bit Pro and CS5)
Check your WinXp configuration and eliminate (not remove, just stop from running at startup) anything you don't really need
Background programs can cause problems for video editing
The usual advice is to disable anti-virus (and, of course, don't connect to the Internet) to reduce the drain on resources
Also do not have other programs YOU start running, so PPro has 100% of the computer's attention & resources
Be sure you have a good device driver for your nVidia card
This is usually the latest one (direct from nVidia, not Windows update) but you MAY need to experiment with driver versions in case a later version does not work well
>HDV project where the bulk of the files are HDV from a Canon HV20
CS5 is much better at allowing different kinds of files in a project, I'm not so sure about earlier versions
If your final output is going to be DVD what MAY help is to do only the HDV part, save out to DV AVI Widescreen, then do the other codecs in a separate project, and finally join the DV AVI files in a final project
CS4 is 32bit so will not take FULL advantage of Win7 and a 64bit computer... but if you have enough memory (I would say 12 or 16 Gig, depending on motherboard) that will allow CS4 to use as much ram as possible
Just how do you have your drives configured?
My 3 hard drives are configured as... (WD = Western Digital)
1 - 320G WD Win7 64bit Pro and all program installs
2 - 320G WD Win7 swap file and video project files
3 - 1T WD all video files... input & output files
Search Microsoft to find out how to redirect your Windows swap file
http://search.microsoft.com/search.aspx?mkt=en-US&setlang=en-US

How to Use Schannel for TLS Sockets on Windows?

I need make a c++ TLS socket server running on Windows XP, and a c# TLS socket client on Windows 7.
The reason of using Schannel TLS is that it is FIPS 140-2 validated.
But it is not easy to find some sample code of Schannel.
By search, I found two c++ TLS samples, but the samples use the secur32.dll, some APIs seem are FIPS non-approved.
codeproject SSL/TLS client/server for .NET and SSL tunnelling
http://www.coastrd.com/c-schannel-smtp C++ SSPI Schannel TLS example
According to 140sp1000.pdf (Microsoft Windows Vista Kernel Mode Security Support Provider Interface (ksecdd.sys) Security Policy Document), following APIs are FIPS non-approved APIs.
InitializeSecurityContextW
ImpersonateSecurityContext
EncryptMessage
DecryptMessage
I am quite confused about two things:
One is that the FIPS non-approved APIs of ksecdd.sys also are also non-approved in secur32.dll?
Another question is what's the correct way of using Schannel. Are the samples using Schannel in the correct way, must the APIs InitializeSecurityContextW/EncryptMessage be used?
I want some sample code about how to use Schannel in native c++ and managed c#.

I'm not sure what information you are referring to that indicates InitializeSecurityContext() and EncryptMessage() are not FIPS compliant. InitializeSecurityContext() is required API on the client side. EncryptMessage() is the required API to
encrypt data. Both APIs are important APIs in SSPI.
In .NET, you would use the SSLStream Class, https://msdn.microsoft.com/en-us/library/system.net.security.sslstream(v=vs.110).aspx .
MSDN has sample code for both the client and server.
There used to be an SSPI client + server sample (WebClient & WebServer) on the Windows SDK. I don't know if it is still there. If you can't find them, please let me know.
thanks
Frank K [MSFT]
Follow us on Twitter, www.twitter.com/WindowsSDK.

How to recreate capture for oracle 10gR2 in window

Hi Experts,
After I got the archived issues, I restarted capture process in vmsdbhq by strmadmin account and then I saw the messages as: WAITING FOR REDO: LAST SCN MINED 6134217037123.
SQL> DECLARE
2 -- Declare variable to hold instantiation SCN
3 iscn NUMBER;
4 BEGIN
5 iscn:=DBMS_FLASHBACK.GET_SYSTEM_CHANGE_NUMBER();
6 DBMS_OUTPUT.PUT_LINE ('Instantiation SCN is: ' || iscn);
7 END;
8 /
Instantiation SCN is: 6134217223400
SQL> begin
2 DBMS_cAPTURE_ADM.ALTER_CAPTURE(
3 capture_name => 'STREAM_CAPTURE',
4 start_scn => 6134217223400,
5 first_scn => 6134217223400);
6 end;
7 /
begin
ERROR at line 1:
ORA-26666: cannot alter STREAMS process STREAM_CAPTURE
ORA-06512: at "SYS.DBMS_CAPTURE_ADM_INTERNAL", line 166
ORA-06512: at "SYS.DBMS_CAPTURE_ADM", line 212
ORA-06512: at line 2
PL/SQL procedure successfully completed.
I got advice to recreate this capture.
How to recreate a capture? May I have a procedure in detail? which difference between recreate capture and create capture?
Or i need to stop propagation during using alter exist capture?
If drop capture, do I need to all capture steps?
I am new person in here
Thanks for your help!
JIm

+" which difference between recreate capture and create capture?"+
No major difference.
Create capture - You are creating capture process for the first time.
Recreate capture - You are dropping capture process and creating it again..
To recreate capture process, first you have to stop associated propagation and apply process.
than stop and drop the exising capture process. You can follow the same procedure as you followed for creating the capture process initially..
See following example, followed by me for the same:
1) stop capture process
BEGIN
DBMS_CAPTURE_ADM.STOP_CAPTURE(
capture_name => 'APPS_CAPTURE');
END;
2) Stop propagation process.
Execute following command as stream administrator from primary database.
BEGIN
DBMS_PROPAGATION_ADM.STOP_PROPAGATION(
propagation_name => 'APPS_PROP');
END;
3) Stop apply process.
Execute following command as stream administrator from replica database.
BEGIN
DBMS_APPLY_ADM.STOP_APPLY(
apply_name => 'APPS_APPLY');
END;
4) drop capture process
BEGIN
DBMS_CAPTURE_ADM.DROP_CAPTURE(
capture_name => 'APPS_CAPTURE',
drop_unused_rule_sets => true);
END;
5) check table status. (as sys user)
select count(*) from dba_objects where object_name like 'APPS_CAP_TABLE';
6) ----check rules (our rule is:
SELECT rule_owner, rule_name FROM dba_rules
7) ----create capture process
begin
DBMS_CAPTURE_ADM.CREATE_CAPTURE(
queue_name => 'APPS_CAP_QUEUE',
capture_name => 'APPS_CAPTURE',
rule_set_name => NULL,
start_scn => NULL,
source_database => 'AQPROD',
use_database_link => FALSE,
first_scn => NULL,
logfile_assignment => 'implicit',
negative_rule_set_name => NULL,
capture_user => NULL,
checkpoint_retention_time => 6);
end;
8) --------START CAPTURE PROCESS
BEGIN
DBMS_CAPTURE_ADM.START_CAPTURE(
capture_name => 'APPS_CAPTURE');
END;
9) --------START PROPAGATION PROCESS
BEGIN
DBMS_PROPAGATION_ADM.START_PROPAGATION(
capture_name => 'APPS_PROP');
END;
10) Start apply process.
Execute following command as stream administrator from replica database.
BEGIN
DBMS_APPLY_ADM.START_APPLY(
apply_name => 'APPS_APPLY');
END;
HTH.
Regards,
Dipali..

How To Configure GP For Client DC on Windows Server 2003

Dear all,
I have been installed windows server 2003 and make one DC on my server. And i create several group and want to make policy for that each group. For example I have created '2014' group and all user who join my dc and registered as a part of '2014' group couldn't
access their browser such as Firefox and IE and couldn't access their bluetooth. How can I make it possible?
Thanks before.
Warm Regards,

Hi Denni Sembiring,
Could you clarify your question “all user who join my dc and registered as a part of '2014' group couldn't access their browser such as Firefox and IE and couldn't access their
Bluetooth”, are you want to realize to limit some user can access the specific software and computer device? GPOs can be linked to the following levels:
•Site
•Domain
•Organizational Unit
We can not link GPO to group, if you want to limit specific user can only access specific software you can refer the following KB to restrict user access.
The related KB:
How To use Software Restriction Policies in Windows Server 2003
http://support.microsoft.com/kb/324036
I’m glad to be of help to you!
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

How to turn on password peek funtion in windows 8

One of the few things I like about windows 8 is the ability to check to see if you have put in the password correctly clicking on the peek symbol. but I can't make it work in Firefox? It works in explorer. I would like to turn it on in Firefox. thanks for your help Bob

Hi,
According to your description, I would like to share the link with you:
Airplane Mode On or Off Shortcuts - Create in Windows 8
http://www.eightforums.com/tutorials/24541-airplane-mode-off-shortcuts-create-windows-8-a.html
If you want to the detail of the script, I suggest to post the question on Script Center forum for further help.
Script Center forum:
http://social.technet.microsoft.com/Forums/scriptcenter/en-US/home
Note: Microsoft provides third-party contact information to help you find technical support. This contact information may change without notice. Microsoft does not guarantee the accuracy of this third-party contact information.
Regards,
Kelvin_Hsu
TechNet Community Support

How to Turn On/Off Airplane mode in windows through powershell script

I want to turn on and off Airplane mode through powershell script, any way for this?
I know that there are some exe files that can be used, but still I want to do this from powershell script.

Hi,
According to your description, I would like to share the link with you:
Airplane Mode On or Off Shortcuts - Create in Windows 8
http://www.eightforums.com/tutorials/24541-airplane-mode-off-shortcuts-create-windows-8-a.html
If you want to the detail of the script, I suggest to post the question on Script Center forum for further help.
Script Center forum:
http://social.technet.microsoft.com/Forums/scriptcenter/en-US/home
Note: Microsoft provides third-party contact information to help you find technical support. This contact information may change without notice. Microsoft does not guarantee the accuracy of this third-party contact information.
Regards,
Kelvin_Hsu
TechNet Community Support

How to set permissions for files created by Windows on OS 10.8 volume

I am in process of upgrading from an iMac with OS 10.6 to an iMac with OS 10.8. In my office network, I store all files on my iMac and let the Windows PCs act as workstations to read/write onto the Mac. (It's simpler to have all files centralized in one location, and only have to be concerned about backing up one volume.)
When I had OS 10.4 and OS 10.6 any newly created file saved by the Windows PCs onto the Mac could be opened by the Mac.
But with OS 10.8, I can not open newly created files from Windows. The file permissions for the newly created files from the Windows PCs are:
PCUser = read/write; Everyone = no access.
What do I need to do so that newly created files from the Windows PC (currently Windows 7) can be opened by the Mac, without having to use Get Info to reset the permissions each time?

You could try adding this Access Control Entry (ACE) to the folders you let them save to:
sudo chmod -R +a "accountinggroup allow delete,chown,list,search,add_file,add_subdirectory,delete_child,file_inherit,directory_inherit" /Path/to/topmost/folder
You first need to create a group for all the sharing people you want to have access to that folder, if you don't already have one. In the example, "accountinggroup" is the group, so change that to whatever you want to use.
The ACE allows them full access to the files in the folders. If you want to limit that, remove the option (such as delete).
You create Groups in Users & Groups System Preference just like creating a new user. Just change the account type to Group.
If you want a GUI to do the settings, try Sandbox. It's got a few glitches in the Interface, but it seems to write the ACL correctly. One glitch is selecting the Group or User. I had just a list of Continuing in the popup menu. I typed in the Group name I wanted and it worked. Some errors pop up as you traverse the file hierarchy, but you can dismiss them.
Here is an old hint, which gives a little background, and some other options: http://hints.macworld.com/article.php?story=20090219133314985
The Server tools would allow you to set this up more easily, but if this is all you need as the server, I don't know if it is worth it.

How to change size for pop-up history window

Hello!
I work with PoSH and like use shortcut F7 for access to history powershell commands. But it is very small for my purposes.
Are there way to change size (increase) this window?
Truly, Valery Tyurin

Hi Varlery,
I also haven't found a good methad, the explaination below is for your reference:
The command-line buffer retains the last 50 commands by default. You can increase or decrease that setting by editing the properties of the console window itself. Click on the window’s control box and select Properties. Change the size of the “Command History
buffer size” on the Options tab.
This command history is actually separate from Windows PowerShell itself. It’s maintained by the console-hosting application. Windows PowerShell isn’t even aware this exists.
Refer to:
Windows PowerShell: Those Who Forget History
If there is anything else regarding this issue, please feel free to post back.
Best Regards,
Anna Wang
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

How to disable openGL in after effects cs6?

I have posted a previous discussion, but I don't know why, no one is answering me and it's really annoying. Please, please, please, I can't wait anymore, tell me how to disable openGL in after effects cs6
windows 7 SP1 64 bit, ati radeon 5570, 6 Go ram, 4 core processor 2.8 GHz, creative x fi sound blaster.

This is the other discussion: http://forums.adobe.com/message/4518765#4518765
I've tried to lower the quality, and with pure magic, it now works, even when I put highest quality. I don't understand what happened. I asked you how to disable openGL because they told me to in the last discussion. So, thank you for repairing my problem (I think you repaired it, i'll make tests to see). Just in case, could you verify if it's posible to disable openGL like the other person told me?

How do you disable the split screen / multi-window feature.

I have had my phone for 2 days, and I can not figure out how to turn off the split screen/multi-window feature. It pops up automatically at the worst times and it is getting very frustrating. I have read many things on how to use it, but have yet to find any thing that explains of to disable it.

Well, it doesn't seem that there is a way. But I solved my
problem because my minimal player was Flash 7,0,29,0 and reset the
minimal player to 7,0,0,0.

How to turn OpenGL for PS CS4 in Windows 7 ?

Similar Messages

Maybe you are looking for