How to turn pictures right side up permanently?

My wife took her first 600 pictures on the iphone4S upside down. When we view them in Windows preview, we can rotate them around correctly, but if we leave "Preview" and come back to use it later, they are all upside down again. How can we change them permanently?

Similar Messages

Whenever I click on a photo sent in email, it comes up upside down. How do I turn it right side up?

Whenever I click on a photo sent in email, it comes up upside down. How do I turn it right side up?

Please download the latest version of Firefox.
Thanks

Apple logo on new iPad Air appears sideways. Rotation is not locked. How do I turn it right-side up?

The apple logo on my new iPad Air appears sideways. Rotation is not locked. How can I turn I right-side up?

Hi chs2010,
Welcome to Apple Support Communities.
It sounds like the Apple logo isn't showing up in the correct orientation when you restart your iPad Air. The article below provides some general suggestions, like updating and restoring the device, which will help you find out if this is a hardware or software issue.
iPad: Basic troubleshooting
http://support.apple.com/kb/TS3274
I hope this helps.
-Jason

How do you populate right side of Shuttle control

Hi,
I am trying to use shuttle control. I am not sure how to populate the right side of the shuttle control from database. I am using the following code. But, it is not populating the right side. In this code, P35_COUNTRIES is my shuttle. P35_X is a text field just to test the output. I can see an output 5:8:9 in the text field. But, my shuttle right side is empty. Am I doing something wrong here ? I would really appreciate any suggestions.
DECLARE
vCountries VARCHAR2(100);
vSEP VARCHAR2(1);
BEGIN
:P35_X := 'Inside test';
vCountries := '';
FOR C IN (SELECT country_id FROM countries WHERE territory_id = 1)
LOOP
vCountries := vCountries || vSEP || c.country_id;
:P35_X := vCountries;
vSEP := ':';
END LOOP;
:P35_COUNTRIES := vCountries;
:P35_X := vCountries;
END;
Thanks

Hi,
Yes, it is getting populated: [http://apex.oracle.com/pls/otn/f?p=30879:5]
My Source settings for the shuttle ("P5_SHUTTLE") are:
Source Used: Only...
Source Type: Static Assignment...
Source Value: (Blank)
Post Calc Computation: (Blank)
Default Value: (Blank)
List of Values Definition: SELECT DNAME d, DEPTNO r FROM DEPT ORDER BY 1
Settings for my Computation for this item:
Item Name: P5_SHUTTLE
Type: PL/SQL Function Body
Computation Point: Before Header
Computation:
DECLARE
vDEPT APEX_APPLICATION_GLOBAL.VC_ARR2;
i NUMBER := 1;
BEGIN
FOR c IN (SELECT DISTINCT DEPTNO FROM EMP WHERE ENAME LIKE 'A%')
LOOP
vDEPT(i) := c.DEPTNO;
i := i + 1;
END LOOP;
RETURN APEX_UTIL.TABLE_TO_STRING(vDEPT);
END;This computation is unconditional, so runs everytime the page is loaded.
Andy

Iphoto shows pictures right side up when I upload to myspace its crooked.

I'm having a problem in which my pictures in iphoto are right side up yet when I load them to myspace they are rotated. I have taken the pictures with my iphone, and I cant seem to figure out the problem.

Karl:
The iPhoto and many cameras have an auto-rotate feature that add a tag to the photos telling other applications that can read that tag which orientations to display it. I don't believe that feature can be turned off on the iPhoto so you will have to do a manual rotate of the file before uploading to myspace. You can do that by exporting to the desktop and using the free contextual menu application PhotoTool CM to losslessly rotate the file in the direction needed. A good way to check the file is to drag it into a Safari window. Safari does not read the tag so will display the physical orientation of the file.
TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto (iPhoto.Library for iPhoto 5 and earlier) database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.
I've created an Automator workflow application (requires Tiger or later), iPhoto dB File Backup, that will copy the selected Library6.iPhoto file from your iPhoto Library folder to the Pictures folder, replacing any previous version of it. It's compatible with iPhoto 6 and 7 libraries and Tiger and Leopard. Just put the application in the Dock and click on it whenever you want to backup the dB file. iPhoto does not have to be closed to run the application, just idle. You can download it at Toad's Cellar. Be sure to read the Read Me pdf file.
Note: There's now an Automator backup application for iPhoto 5 that will work with Tiger or Leopard.

How to populate/persist right-side of Shuttle in apex 3.1.2 after submit

In the new Shuttle I can only specify one LOV (select empname, empid from emp where empid not in (1,3,4)) but I also want to populate the right-side of the shuttle to show values which the non-members (select empname, empid from emp where empid in (2,5)) so that the user can make selections which persist after submit.

Rashid,
The method that worked for me was to:
1) Create the LOV to populate the Left side of the shuttle (unselected).
2) Define the Source property to populate the Right side (selected). In my case, I used a PL/SQL Function Body type, but any would work.
I set the Source Used to Always, so that my user always started with the same default selection, but if you set it to "Only set when session value is null", that should do what you're asking for.
Good luck (and thanks for the points by marking my answer helpful or correct),
Stew

How to turn off right-click dictionary 'look up' search in OS X Lion

Right-click spotlight search was a very usefull feature in snow leopard, how can I enable this in Lion, I really don't need a dictionary.
Thanks

I've created a bug report for this. More information will most likely appear there.
https://bugzilla.mozilla.org/show_bug.cgi?id=687026

Right side of a shuttle - Retunr id and not the display value of the LOV.

Hi all,
The matter is how to populate/persist right-side of Shuttle in apex 4.0.1 after submit. The only problem I have is that the values
on the right side of the shuttle are dispayed as (retun value of the LOV) and not as (dislay valueo of the LOV). What I'm missing.
There is a way to pre-load dynamically, so depending on a query, a set of values on the right of the Shuttle, and then allow end user to change the preselection adding or removing values.?.

On page load you need to set the page item value to a colon separated list. Basically just reverse what ever processing you are doing on submit.

How to turn stereo into 5.1 suround sound

Hello i have cs 5.5 i would like to take old vhs or 8mm video tapes and put them on dvd in 5.1 surround sound can anyone tell me how to spit stereo into the left center tight live left surround right surround every time i try my receiver kicks into Dolby d but the sound only comes threw the front left and tight can anyone help me and if so a step by step would be a great help.

This is gonna get complicated..so I'm gonna put pics in first and then explain them cause I dont remember what order I made the pics in...plus I'm an idiot so my explanation will be weird.. plus I never do this stuff can im using cs3...
basically this is what I did. created new project and in preferences chose 5.1 surround...chose a few mono track, a couple stereo tracks, a few submix tracks and some 5.1 tracks..something for everyone..
Then I put a real stereo wav file into a stereo track. The left and right sides were recorded so that it is REALLY stereo and very obvious ( old beatle song ). You can tell by waveform how different left and right side of stereo wav file is...
then i opened soundforge and copied ONLY the left channel of the stereo wav file and saved it as a MONO file...so I can demonstrate THAT part..
using stereo wav and using 5.1 control you can put that wav into left front, right front, etc..but it puts it ALL there unless you play with stuff a LOT in your controls...to me its easier to make a mono wav file of the left side and just use that. I would have made a right side only wav ALSO if I was to continue with this project ...
above image is where you choose what to add to project
some controls ..you can assign to submix and you can use as a master..etc
above image is real stereo wav in stereo track..like yours...
above is making a mono track wav out of the stereo left side of original stereo wav..
above.. now if I put my mono wav into that track and move my dot to front left... I hear only the left part of the original stereo wav in the left front speaker... in essence I can put mono track of 'right' side into the right front speaker using another mono track and moving the dot.. I can also now put that stuff into the other speakers as desired..and mix the volumes etc in the sound controls ... know what I mean..you can do other stuff with the stereo only wav if you cant make mono tracks for more control...and play with the submix stuff etc.. this should get you started ??
ps.. I also made a stereo wav of the left side ONLY just in case you wanted to see what that looks like in a stereo track..but its only left side of original wav..
good luck !

Does anyone know how to get a right ragged margin on this pages app?

does anyone know how to make a right side margin ragged i.e. it does not break up any words.

Use the left aligned text arrangement & make sure hyphenate is unchecked in the document inspector.

Right side menu

Hi,
I want to create menu list in right side. already created global menu,main Menu,subMenu,MenuList in left side.now i want to create menulist in right side.
How to create this right side menulist? i am using JDeveloper version 10.1.3.2.0.
please help me.
Thanks,

You can use a panel border layout and insert your menu in the "end" facet.

When I click on a picture or map in i.e. Kijiji real estate pages, Firefox opens it all crunched to the right side of the page. How can I correct this?

When I click on a picture or map in i.e. Kijiji real estate pages, Firefox opens it all crunched to the right side of the page. How can I correct this?
For instance I view an apartment ad which has various pictures attached. It says click on the pictures to see an enlarged version. FF opens the page however most of the page is blank and the picture appears to be pushed to the right side of the page and shows as if it has been scrunched agains the right side not showing the whole picture.
What Can I do to correct this?

I see that you have increased some font sizes considerably.
* font.size.fixed.x-western: 20
* font.size.variable.x-western: 22
This can effect margins when the website specifies these as em values and cause content to shift.
If you have made changes to Advanced font settings like increasing the minimum/default font size then try the default minimum setting "none" and the default font size 16 in case the current setting is causing problems.
*Tools > Options > Content : Fonts & Colors > Advanced > Minimum Font Size (none)
Make sure that you allow pages to choose their own fonts.
*Tools > Options > Content : Fonts & Colors > Advanced: [X] "Allow pages to choose their own fonts, instead of my selections above"
It is better not to increase the minimum font size, but to use an extension to set the default page zoom to prevent issues with text not being displayed properly.
You can use the NoSquint extension to set font size (text/page zoom) and text color on web pages.
*NoSquint: https://addons.mozilla.org/firefox/addon/nosquint/
Note that your System Details List shows multiple Flash plugins.
* Shockwave Flash 16.0 r0
*Shockwave Flash 12.0 r0
You can find the installation path of all plugins on the <b>about:plugins</b> page.
*http://kb.mozillazine.org/Issues_related_to_plugins#Identifying_installed_plugins
You can check the Flash player installation folder for multiple Flash player plugins and remove older version(s) of the plugin (NPSWF32) and possibly (re)install the latest Flash player.
*(32 bit Windows) C:\Windows\System32\Macromed\Flash\
*(64 bit Windows) C:\Windows\SysWOW64\Macromed\Flash\
Your System Details list shows that you have a user.js file in the profile folder to initialize prefs each time Firefox starts.
The user.js file is only present if you or other software has created this file and normally it wouldn't be there.
You can check its content with a plain text editor (right-click: Open with) if you didn't create this file yourself.
The user.js file is read each time Firefox is started and initializes preferences to the value specified in this file, so preferences set via user.js can only be changed temporarily for the current session.
You can delete this user.js and rename (or delete) the prefs.js file to reset all prefs to the default value including prefs set via user.js and prefs that are no longer supported in the current Firefox release.
*http://kb.mozillazine.org/Preferences_not_saved
*http://kb.mozillazine.org/Resetting_preferences

How do you change a brush tool color in Photoshop13. The color chart that has always been on the right side of the screen is gone and I cannot find out how to turn it on

How do you change a brush tool color in Photoshop13. The color chart that has always been on the right side of the screen is gone and I cannot find out how to turn it on

I now have the pallete on the right side of my screen. But, I am unable to change the color of the brush. I move the eye dropper over red and click on it. A panel comes saying 'Pure Red', I click ok but the brush color does not change.
David Miller
[email protected]

How can I get the picture to show in Photoshop? The thumbnail image appears in the right side panel but the full image isn't showing at all.

How can I get the picture to show in Photoshop CS3? The thumbnail image appears in the right side panel but the full image isn't showing at all.

What specific information would you need? The program was working just fine early yesterday morning and than when I came back in the afternoon to edit some more pictures that is when I wasn't able to see the full image anymore. It is providing me with all of the editing options as if the picture is there but it is just a blank screen with the thumbnail pic showing in the right panel.

How do I turn a video, taken upside down, right side up?

I woould like to know what App can enable me to turn a video, taken upside down, back to desired right side up cond

There are programs for computers which can do it
http://www.toptrix.net/2011/10/how-to-change-orientation-of-video.html
You can get more by googling
change orientation of video

How to turn pictures right side up permanently?

Similar Messages

Maybe you are looking for