How to turn waste into a sundry stock item in SAP B1

G'day folks,
This is my first post ot the SAP B1 forum, and probably wont be the last. So far I've used this forum to resolve most problems, but I have an issue with I havn't seen to date on any thread.
Two of the 6 companies I'm implementing in SAP (2 down, 4 to go...) are retail timber businesses. There is a need to ocasionally dock pieces of timber which are already defined in the Item Master Data, into specific lengths. The offcuts can be put back into stock to be sold, but we don't want to set up a new item code, or necissarily set up a BOM/Production PO for a one off order.
For example, a customer wants 20 x 3m lengths of timber of a certain profile, but it only comes in lengths of 5m, thus the 2m offcuts can still be sold. How do you handle that in SAP B1 without utilising BOM for a small one off order and not setting up a special item code for the offcut which can also be sold?
Thanks

Hi,
Welcome you post on the forum.
In your case, you could use inventory UoM as one meter instead. It may not be convenient if majority sales are 5m total length. However, if the cut off is not rare, this work around would save you time.
Thanks,
Gordon

Similar Messages

HOW TO TURN $6 INTO $6,000!!!!!! READING THIS COULD CHANGE YOUR LIFE!

HOW TO TURN $6 INTO $6,000!!!!!! READING THIS COULD CHANGE
YOUR LIFE!
I found this on a bulletin board and decided to try it. A
little while back,
I was browsing through newsgroups, just like you are now, and
came across an
article similar to this that said you could make thousands of
dollars within
weeks with only an initial investment of $6.00! So I thought,
Yeah right,
this must be a scam,but like most of us, I was curious, so I
kept reading.
Anyway, it said that you send $1.00 to each of the 6 names
and address
stated in the article. You then place your own name and
address in the
bottom of the list at #6, and post the article in at least
200 newsgroups.
(There are thousands) No catch, that was it. So after
thinking it over, and
talking to a few people first, I thought about trying it. I
figured: what
have I got to lose except 6
stamps and $6.00, right? Then I invested the measly $6.00.
Well GUESS
WHAT!!...
within 7 days, I started getting money in the mail! I was
shocked! I figured
it would end soon, but the money just kept coming in. In my
first week, I
made about $25.00. By the end of the second week I had made a
total of over
$1,000.00! In the third week I had over $10,000.00 and it's
still growing.
This is now my fourth week and I have made a total of just
over $42,000.00
and it's still coming in rapidly. It's certainly worth $6.00,
and 6 stamps,
I have spent more than that on the lottery!! Let me tell you
how this works
and most importantly, why it works....Also, make sure you
print a copy of
this article NOW, so you can get the information off of it as
you need it. I
promise you
that if you follow the directions exactly, that you will
start making more
money than you thought possible by doing something so easy!
Suggestion: Read this entire message carefully! (Print it out
or download
it.) Follow the simple directions and watch the money come
in! It's easy.
It's legal. And, your investment is only $6.00 (Plus postage)
IMPORTANT: This is not a rip-off; it is not indecent; it is
not illegal; and
it is virtually no risk - it really works!!!! If all of the
following
instructions are adhered to, you will receive extraordinary
dividends.
PLEASE NOTE: Please follow these directions EXACTLY, and
$50,000 or more can
be yours in 20 to 60 days. This program remains successful
because of the
honesty and integrity of the participants. Please continue
its success by
carefully
adhering to the instructions. You will now become part of the
Mail Order
business. In this business your product is not solid and
tangible, it's a
service. You are in the business of developing Mailing Lists.
Many large
corporations are happy to pay big bucks for quality lists.
However, the
money made from the mailing lists is secondary to the income
which is made
from people like you and me asking to be included in that
list. Here are the
4 easy steps to success:
STEP 1: Get 6 separate pieces of paper and write the
following on each piece
of paper; PLEASE PUT ME ON YOUR MAILING LIST. Now get 6 US
$1.00 bills and
place ONE inside EACH of the 6 pieces of paper so the bill
will not be seen
through the envelope (to prevent thievery). Next, place one
paper in each of
the 6 envelopes and seal them. You should now have 6 sealed
envelopes, each
with a piece of paper stating the above phrase, your name and
address, and a
$1.00 bill. What you are doing is creating a service. THIS IS
ABSOLUTELY
LEGAL! You are requesting a legitimate service and you are
paying for it!
Like most of us I was a little skeptical and a little worried
about the
legal aspects of it all. So I checked it out with the U.S.
Post Office
(1-800-725-2161) and they
confirmed that it is indeed legal! Mail the 6 envelopes to
the following
addresses:
Mailing Adresses
Stephanie Hicks
1283 Evening Canyon
Henderson NV 89014
Ross Wilson
202 Belmont Dr.
Thibodaux, LA 70301
James Small
4690 Sierra St.
Riverside, CA 92504
Thomas G.
P.O. Box 591939
Houston, TX 77259
S. Parker
159 Main Street
Dadeville, Alabama 36853
A. Wyman
9734 Landowne ct.
Orlando, FL 32817
STEP 2: Now take the #1 name off the list that you see above,
move the other
names up (6 becomes 5, 5 becomes 4, etc...) and add YOUR Name
as number 6 on
the list.
STEP 3: Change anything you need to, but try to keep this
article as close
to
original as possible. Now, post your amended article to at
least 200
newsgroups. (I think there are close to 24,000 groups) All
you need is 200,
but remember, the more you post, the more money you make!
This is perfectly
legal! If you have any doubts, refer to Title 18 Sec. 1302
& 1341 of the
Postal lottery laws. Keep a copy of these steps for yourself
and, whenever
you need money, you can use it again, and again.
PLEASE REMEMBER that this program remains successful because
of the honesty
and integrity of the participants and by their carefully
adhering to the
directions. Look at it this way. If you are of integrity, the
program will
continue and the money that so many others have received will
come your way.
NOTE: You may want to retain every name and address sent to
you, either on a
computer or hard copy and keep the notes people send you.
This VERIFIES that
you are truly providing a service. (Also, it might be a good
idea to wrap
the $1 bill in dark paper to reduce the risk of mail theft.)
So, as each
post is downloaded and the directions carefully followed, six
members will
be reimbursed for their participation as a List Developer
with one dollar
each. Your name will move up the list geometrically so that
when your name
reaches the #1 position you will be receiving thousands of
dollars in
CASH!!! What an opportunity for only $6.00 ($1.00 for each of
the first six
people listed above) Send it now, add your own name to the
list and you're
in business!
---DIRECTIONS ----- FOR HOW TO POST TO NEWSGROUPS------------
Step 1) You do
not need to re-type this entire letter to do your own
posting. Simply put
your cursor at the beginning of this letter and drag your
cursor to the
bottom of this document, and select 'copy' from the edit
menu. This will
copy the entire letter into the computer's memory.
Step 2) Open a blank 'notepad' file and place your cursor at
the top of the
blank page. From the 'edit' menu select 'paste'. This will
paste a copy of
the letter into notepad so that you can add your name to the
list.
Step 3) Save your new notepad file as a .txt file. If you
want to do your
postings in different settings, you'll always have this file
to go back to.
Step 4) Use Netscape or Internet explorer and try searching
for various
newsgroups (on-line forums, message boards, chat sites,
discussions.) Step
5) Visit these message boards and post this article as a new
message by
highlighting the text of this letter and selecting paste from
the edit menu.
Fill in the Subject, this will be the header that everyone
sees as they
scroll through the list of postings in a particular group,
click the post
message button. You're done with your first one!
Congratulations...THAT'S
IT! All you have to do is jump to different newsgroups and
post away, after
you get the hang of it, it will take about 30 seconds for
each newsgroup!
**REMEMBER, THE MORE NEWSGROUPS YOU POST IN, THE MORE MONEY
YOU WILL MAKE!!
BUT YOU HAVE TO POST A MINIMUM OF 200**
That's it! You will begin receiving money from around the
world within days!
You may eventually want to rent a P.O.Box due to the large
amount of mail
you will receive. If you wish to stay anonymous, you can
invent a name to
use, as long as the postman will deliver it.
**JUST MAKE SURE ALL THE ADDRESSES ARE CORRECT.** Now the WHY
part: Out of
200 postings, say I receive only 5 replies (a very low
example). So then I
made $5.00 with my name at #6 on the letter. Now, each of
the 5 persons who just sent me $1.00 make the MINIMUM 200
postings, each
with my name at #5 and only 5 persons respond to each of the
original 5,
that is another $25.00 for me, now those 25 each make 200
MINIMUM posts with
my name at #4 and only 5 replies each, I will bring in an
additional
$125.00! Now, those 125 persons turn around and post the
MINIMUM 200 with my
name at #3 and only receive 5 replies each, I will make an
additional
$626.00! OK, now here is the fun part, each of those 625
persons post a
MINIMUM 200 letters with my name at #2 and they each only
receive 5 replies,
that just made me $3,125.00!!! Those
3,125 persons will all deliver this message to 200 newsgroups
with my name
at #1 and if still 5 persons per 200 newsgroups react I will
receive
$15,625,00!With an original investment of only $6.00!
AMAZING! When your
name is no longer on the list, you just take the latest
posting in the
newsgroups, and send out another $6.00 to names on the list,
putting your
name at number 6 again. And start posting again. The thing to
remember is:
do you realize that thousands of people all over the world
are joining the
internet and reading these articles
everyday?, JUST LIKE YOU are now!! So, can you afford $6.00
and see if it
really works?? I think so... People have said, "e;what if the
plan is played
out and no one sends you the money? So what! What are the
chances of that
happening when there are tons of new honest users and new
honest people who
are joining the internet and newsgroups everyday and are
willing to give it
a try?
Estimates are at 20,000 to 50,000 new users, every day, with
thousands of
those joining the actual internet.
Remember: play FAIRLY and HONESTLY and this will really work.

HOW TO TURN $6 INTO $6,000!!!!!! READING THIS COULD CHANGE
YOUR LIFE!
I found this on a bulletin board and decided to try it. A
little while back,
I was browsing through newsgroups, just like you are now, and
came across an
article similar to this that said you could make thousands of
dollars within
weeks with only an initial investment of $6.00! So I thought,
Yeah right,
this must be a scam,but like most of us, I was curious, so I
kept reading.
Anyway, it said that you send $1.00 to each of the 6 names
and address
stated in the article. You then place your own name and
address in the
bottom of the list at #6, and post the article in at least
200 newsgroups.
(There are thousands) No catch, that was it. So after
thinking it over, and
talking to a few people first, I thought about trying it. I
figured: what
have I got to lose except 6
stamps and $6.00, right? Then I invested the measly $6.00.
Well GUESS
WHAT!!...
within 7 days, I started getting money in the mail! I was
shocked! I figured
it would end soon, but the money just kept coming in. In my
first week, I
made about $25.00. By the end of the second week I had made a
total of over
$1,000.00! In the third week I had over $10,000.00 and it's
still growing.
This is now my fourth week and I have made a total of just
over $42,000.00
and it's still coming in rapidly. It's certainly worth $6.00,
and 6 stamps,
I have spent more than that on the lottery!! Let me tell you
how this works
and most importantly, why it works....Also, make sure you
print a copy of
this article NOW, so you can get the information off of it as
you need it. I
promise you
that if you follow the directions exactly, that you will
start making more
money than you thought possible by doing something so easy!
Suggestion: Read this entire message carefully! (Print it out
or download
it.) Follow the simple directions and watch the money come
in! It's easy.
It's legal. And, your investment is only $6.00 (Plus postage)
IMPORTANT: This is not a rip-off; it is not indecent; it is
not illegal; and
it is virtually no risk - it really works!!!! If all of the
following
instructions are adhered to, you will receive extraordinary
dividends.
PLEASE NOTE: Please follow these directions EXACTLY, and
$50,000 or more can
be yours in 20 to 60 days. This program remains successful
because of the
honesty and integrity of the participants. Please continue
its success by
carefully
adhering to the instructions. You will now become part of the
Mail Order
business. In this business your product is not solid and
tangible, it's a
service. You are in the business of developing Mailing Lists.
Many large
corporations are happy to pay big bucks for quality lists.
However, the
money made from the mailing lists is secondary to the income
which is made
from people like you and me asking to be included in that
list. Here are the
4 easy steps to success:
STEP 1: Get 6 separate pieces of paper and write the
following on each piece
of paper; PLEASE PUT ME ON YOUR MAILING LIST. Now get 6 US
$1.00 bills and
place ONE inside EACH of the 6 pieces of paper so the bill
will not be seen
through the envelope (to prevent thievery). Next, place one
paper in each of
the 6 envelopes and seal them. You should now have 6 sealed
envelopes, each
with a piece of paper stating the above phrase, your name and
address, and a
$1.00 bill. What you are doing is creating a service. THIS IS
ABSOLUTELY
LEGAL! You are requesting a legitimate service and you are
paying for it!
Like most of us I was a little skeptical and a little worried
about the
legal aspects of it all. So I checked it out with the U.S.
Post Office
(1-800-725-2161) and they
confirmed that it is indeed legal! Mail the 6 envelopes to
the following
addresses:
Mailing Adresses
Stephanie Hicks
1283 Evening Canyon
Henderson NV 89014
Ross Wilson
202 Belmont Dr.
Thibodaux, LA 70301
James Small
4690 Sierra St.
Riverside, CA 92504
Thomas G.
P.O. Box 591939
Houston, TX 77259
S. Parker
159 Main Street
Dadeville, Alabama 36853
A. Wyman
9734 Landowne ct.
Orlando, FL 32817
STEP 2: Now take the #1 name off the list that you see above,
move the other
names up (6 becomes 5, 5 becomes 4, etc...) and add YOUR Name
as number 6 on
the list.
STEP 3: Change anything you need to, but try to keep this
article as close
to
original as possible. Now, post your amended article to at
least 200
newsgroups. (I think there are close to 24,000 groups) All
you need is 200,
but remember, the more you post, the more money you make!
This is perfectly
legal! If you have any doubts, refer to Title 18 Sec. 1302
& 1341 of the
Postal lottery laws. Keep a copy of these steps for yourself
and, whenever
you need money, you can use it again, and again.
PLEASE REMEMBER that this program remains successful because
of the honesty
and integrity of the participants and by their carefully
adhering to the
directions. Look at it this way. If you are of integrity, the
program will
continue and the money that so many others have received will
come your way.
NOTE: You may want to retain every name and address sent to
you, either on a
computer or hard copy and keep the notes people send you.
This VERIFIES that
you are truly providing a service. (Also, it might be a good
idea to wrap
the $1 bill in dark paper to reduce the risk of mail theft.)
So, as each
post is downloaded and the directions carefully followed, six
members will
be reimbursed for their participation as a List Developer
with one dollar
each. Your name will move up the list geometrically so that
when your name
reaches the #1 position you will be receiving thousands of
dollars in
CASH!!! What an opportunity for only $6.00 ($1.00 for each of
the first six
people listed above) Send it now, add your own name to the
list and you're
in business!
---DIRECTIONS ----- FOR HOW TO POST TO NEWSGROUPS------------
Step 1) You do
not need to re-type this entire letter to do your own
posting. Simply put
your cursor at the beginning of this letter and drag your
cursor to the
bottom of this document, and select 'copy' from the edit
menu. This will
copy the entire letter into the computer's memory.
Step 2) Open a blank 'notepad' file and place your cursor at
the top of the
blank page. From the 'edit' menu select 'paste'. This will
paste a copy of
the letter into notepad so that you can add your name to the
list.
Step 3) Save your new notepad file as a .txt file. If you
want to do your
postings in different settings, you'll always have this file
to go back to.
Step 4) Use Netscape or Internet explorer and try searching
for various
newsgroups (on-line forums, message boards, chat sites,
discussions.) Step
5) Visit these message boards and post this article as a new
message by
highlighting the text of this letter and selecting paste from
the edit menu.
Fill in the Subject, this will be the header that everyone
sees as they
scroll through the list of postings in a particular group,
click the post
message button. You're done with your first one!
Congratulations...THAT'S
IT! All you have to do is jump to different newsgroups and
post away, after
you get the hang of it, it will take about 30 seconds for
each newsgroup!
**REMEMBER, THE MORE NEWSGROUPS YOU POST IN, THE MORE MONEY
YOU WILL MAKE!!
BUT YOU HAVE TO POST A MINIMUM OF 200**
That's it! You will begin receiving money from around the
world within days!
You may eventually want to rent a P.O.Box due to the large
amount of mail
you will receive. If you wish to stay anonymous, you can
invent a name to
use, as long as the postman will deliver it.
**JUST MAKE SURE ALL THE ADDRESSES ARE CORRECT.** Now the WHY
part: Out of
200 postings, say I receive only 5 replies (a very low
example). So then I
made $5.00 with my name at #6 on the letter. Now, each of
the 5 persons who just sent me $1.00 make the MINIMUM 200
postings, each
with my name at #5 and only 5 persons respond to each of the
original 5,
that is another $25.00 for me, now those 25 each make 200
MINIMUM posts with
my name at #4 and only 5 replies each, I will bring in an
additional
$125.00! Now, those 125 persons turn around and post the
MINIMUM 200 with my
name at #3 and only receive 5 replies each, I will make an
additional
$626.00! OK, now here is the fun part, each of those 625
persons post a
MINIMUM 200 letters with my name at #2 and they each only
receive 5 replies,
that just made me $3,125.00!!! Those
3,125 persons will all deliver this message to 200 newsgroups
with my name
at #1 and if still 5 persons per 200 newsgroups react I will
receive
$15,625,00!With an original investment of only $6.00!
AMAZING! When your
name is no longer on the list, you just take the latest
posting in the
newsgroups, and send out another $6.00 to names on the list,
putting your
name at number 6 again. And start posting again. The thing to
remember is:
do you realize that thousands of people all over the world
are joining the
internet and reading these articles
everyday?, JUST LIKE YOU are now!! So, can you afford $6.00
and see if it
really works?? I think so... People have said, "e;what if the
plan is played
out and no one sends you the money? So what! What are the
chances of that
happening when there are tons of new honest users and new
honest people who
are joining the internet and newsgroups everyday and are
willing to give it
a try?
Estimates are at 20,000 to 50,000 new users, every day, with
thousands of
those joining the actual internet.
Remember: play FAIRLY and HONESTLY and this will really work.

How to turn columns into rows

Hi. Does anyone know how to turn columns into rows ie:
select field1, field2, field3, field4, field5 from table
desired result:
field1 field2
field1 field3
field1 field4
field1 field5
Thank you!

Something like this ?
select field1
, case n.l
when 1 then field2
when 2 then field3
when 3 then field4
when 4 then field5
end field
from table
, (select level l from dual connect by level <= 4) n

Does anyone know how I turn negatives into a positive on Aperture please? I have scanned a bunch of negs and want ot make a contact sheet. Would really appreciate some clues on where to start. Thanks

does anyone know how I turn negatives into a positive on Aperture please? I have scanned a bunch of negs and want ot make a contact sheet. Would really appreciate some clues on where to start. Thanks

Yeah, it's simple. You scan your images singly, then import them. Then, one by one adjust them. Under the adjustment brick, pull up the CURVES tool. It is one of dozens available from the pulldown menu on the left side.
So, with your image in view, you click on the adjustment tool, select CURVES (which will be at the bottom of a few other adjustment sliders such as EXPOSURE) under the Histogram and then grab the bottom of the right hand curve and swing it all the way to the left. Then grab the left hand curve and drag it all the way to the right.
The right curve represents highlights. The left curve represents shadows. Now the two are reversed. Your negative is now a positive. For added control, you can create mid-tone curves of your own and make finer adjustments. I haven't done this much so the experts might weigh in here with corrections and added advice.

How to turn stereo into 5.1 suround sound

Hello i have cs 5.5 i would like to take old vhs or 8mm video tapes and put them on dvd in 5.1 surround sound can anyone tell me how to spit stereo into the left center tight live left surround right surround every time i try my receiver kicks into Dolby d but the sound only comes threw the front left and tight can anyone help me and if so a step by step would be a great help.

This is gonna get complicated..so I'm gonna put pics in first and then explain them cause I dont remember what order I made the pics in...plus I'm an idiot so my explanation will be weird.. plus I never do this stuff can im using cs3...
basically this is what I did. created new project and in preferences chose 5.1 surround...chose a few mono track, a couple stereo tracks, a few submix tracks and some 5.1 tracks..something for everyone..
Then I put a real stereo wav file into a stereo track. The left and right sides were recorded so that it is REALLY stereo and very obvious ( old beatle song ). You can tell by waveform how different left and right side of stereo wav file is...
then i opened soundforge and copied ONLY the left channel of the stereo wav file and saved it as a MONO file...so I can demonstrate THAT part..
using stereo wav and using 5.1 control you can put that wav into left front, right front, etc..but it puts it ALL there unless you play with stuff a LOT in your controls...to me its easier to make a mono wav file of the left side and just use that. I would have made a right side only wav ALSO if I was to continue with this project ...
above image is where you choose what to add to project
some controls ..you can assign to submix and you can use as a master..etc
above image is real stereo wav in stereo track..like yours...
above is making a mono track wav out of the stereo left side of original stereo wav..
above.. now if I put my mono wav into that track and move my dot to front left... I hear only the left part of the original stereo wav in the left front speaker... in essence I can put mono track of 'right' side into the right front speaker using another mono track and moving the dot.. I can also now put that stuff into the other speakers as desired..and mix the volumes etc in the sound controls ... know what I mean..you can do other stuff with the stereo only wav if you cant make mono tracks for more control...and play with the submix stuff etc.. this should get you started ??
ps.. I also made a stereo wav of the left side ONLY just in case you wanted to see what that looks like in a stereo track..but its only left side of original wav..
good luck !

How to assign account assigment automatically Non Stock Item ?

Dear All,
How to assign account assignment automatically at PO level for Non Stock Item Material for expense charges ? Since our user does not familiar with the GL Account code.
Regards,
Setiadi

Setup for Automatic Account Assignment
SPRO-IMG - MM- Valuation Class and Account Assignment- Account Determination-Account determination without wizard
1. Define valuation control T Code OMWM
2. Group together valuation areas T Code OMWD
3. Define valuation class T Code OMSK
u2022 Account category reference
u2022 Valuation class
u2022 Material type / Account Cat Ref
4. Define Account grouping for movement type T Code OMWN
5. Configure automatic posting T Code OBYC
Maintain Transaction/ Event Keyu2019s for your Chart of Accounts
BSX - Stock Posting / Inventory Posting
PRD - Price difference
GBB - Offsetting entry for stock posting
WRX - GR/IR Clearing
Let me know if you need more detailed setup procedure-Switesh!
Edited by: Switesh Nage on Dec 4, 2011 9:33 AM

How to turn something into a voice memo

hey i have a ipod g5 and i noticed that there was a voice memo option i want to turn a recorcing and put it into the voice recording folder can and if i can how do i do it? Thanks for the help

Hi,
Welcome you post on the forum.
In your case, you could use inventory UoM as one meter instead. It may not be convenient if majority sales are 5m total length. However, if the cut off is not rare, this work around would save you time.
Thanks,
Gordon

Logic recording your jam in the background how to turn it into a track

Im new to the logic 8, I had logic 5 and then dabbled with garageband.
So I' have some things to learn and reteach myself,
question is:::::::::
I know you can have your tracks recording enabled and just jam out and it will record and be held in your memory
without hitting the record button and feeling the pressure,
What is the command or how do I make that *jam or music I played* into a recording on that track, (without having to push the record button)
Thanks

The bad news is that the feature you are talking about is called "magic", so it is not possible with audio.
The good news is that logic is filled with magic and can perform some pretty neat tricks, so with Midi, it actually is possible.
The feature is called "capture recording" (default key combination ctrl-apple-alt-R). This only works if the session was playing when you were jamming of course.
Cheers.

Pages - How to turn posters into invitations?

how do I reduce the whole size of what I've created to copy it to a new page and make invitations from it?
The invitation needs to duplicate the poster put will be 2 smaller versions printed onto one page - how do I simply copy all the content, reduce the size to fit etc….

Print to pdf and drag the pdf back into Pages and reduce to fit two up.
Peter

I cannot view any weather info in iOS 7 Notification Center. Any ideas how to turn this widget on? Stocks and daily calendar are there, just not weather.

Location services are on. Weather app is installed. I can get weather info if I go to the app. That info is completely nonexistent in the pull down Notification Center.
Any ideas?

Never mind.. I turned off location services for the weather app, turned it back on and now it's magically working.

How to turn logo into crisp clean vector black and white outline?

I have the colored logo in vector but I need a crisp clean vector black and white outline.
Please advise.
Thank you!

You might be able to at least color all the dark parts in black via Edit > Edit colors > Recolor art.
Maybe you can use it as well to color all the other parts in white (depends on how many there are and if it doesn't get too cluttered).
You might also try to use the magic wand tool to select stuff and then apply different colors.

How to turn widescreen into 4:3?

Hello. I have a videoclip to make but some scenes were filmed in widescreen and some in regular 4:3. Il would like the whole video to be in 4:3. How should I do?
Thanks,
Gautier

Thanks for your answers but I didnt really understand. Here's my problem again. I imported 2 types of video (4:3 and 16:9) on the same project, wich I set on DV NTSC Standard 48. I want the 2 clips to look the same in size, I dont care if its with a black stripe or not.
THIS PICTURE SHOWS THE 16/9 VIDEO. (It's all original setings. I just import and drag the clips on the working space)
THIS IS THE 4:3 VIDEO

Maps: how to turn a dropped pin into a favorite

For iPhone iOS 8: The User Guide doesn't tell how to do this. Have dropped a pin at the current location but can't figure out how to turn it into a favorite. And then once you have a list of favorites, how do you access them?

Yes I had the same problem on the iPad with the new Apple Maps.
I have found that pins dropped by holding your finger on the map can be removed by the method described by the previous answer (from the Inofo panel) but pins that have been dropped by searches cannot be removed this way. To remove these pins clck on the search field and then in the top left corner of the 'Recents' list you will see 'Clear'. When you click on this you can clear all recent searches and all the drop pins associated with these searches should be cleard too. Trouble is it only 'clears all' you cannot 'swipe' to delete one at a time or 'Edit' the list.
Hope this helps.

Post data into Ajax function for Item type plugin

Please advise how to post data into Ajax function for item type plugin
Edited by: Casufi on Jan 16, 2013 7:44 AM

Casufi wrote:
Casufi wrote:
Please advise how to post data into Ajax function for item type plugin
Edited by: Casufi on Jan 16, 2013 7:44 AMI used the following code
var get = new htmldb_Get(null, html_GetElement(''pFlowId'').value, ''NATIVE='||apex_plugin.get_ajax_identifier||''', $v(''pFlowStepId''));
get.addParam(''x01'', node.data.key);
gReturn = get.get();You should use this published true ajax API instaed. apex.server.process( pAjaxIdentifier, pData, pOptions )

How to turn this Java into something I can use in CF?

Hi - Following on from a recent post about how to strip our special characters from a string before insertion to the db I have found this Java code - my question is, how can I turn this into something I can use with CF? I think I need to use the cfscipt tag but that's right on the boundaries of my knowledge base.. If anyone could please help I'd be ever so grateful - thank you!
package net.htmlescape;
* HtmlEscape in Java, which is compatible with utf-8
* @author Ulrich Jensen, http://www.htmlescape.net
* Feel free to get inspired, use or steal this code and use it in your
* own projects.
* License:
* You have the right to use this code in your own project or publish it
* on your own website.
* If you are going to use this code, please include the author lines.
* Use this code at your own risk. The author does not warrent or assume any
* legal liability or responsibility for the accuracy, completeness or usefullness of
* this program code.
public class HtmlEscape {
private static char[] hex={'0','1','2','3','4','5','6','7','8','9','a','b','c','d','e','f'};
 * Method for html escaping a String, for use in a textarea
 * @param original The String to escape
 * @return The escaped String
public static String escapeTextArea(String original)
 return escapeSpecial(escapeTags(original));
 * Normal escape function, for Html escaping Strings
 * @param original The original String
 * @return The escape String
public static String escape(String original)
 return escapeSpecial(escapeBr(escapeTags(original)));
public static String escapeTags(String original)
 if(original==null) return "";
 StringBuffer out=new StringBuffer("");
 char[] chars=original.toCharArray();
 for(int i=0;i<chars.length;i++)
 boolean found=true;
 switch(chars[i])
 case 60:out.append("<"); break; //<
 case 62:out.append(">"); break; //>
 case 34:out.append("""); break; //"
 default:found=false;break;
 if(!found) out.append(chars[i]);
 return out.toString();
public static String escapeBr(String original)
 if(original==null) return "";
 StringBuffer out=new StringBuffer("");
 char[] chars=original.toCharArray();
 for(int i=0;i<chars.length;i++)
 boolean found=true;
 switch(chars[i])
 case '\n': out.append(" "); break; //newline
 case '\r': break;
 default:found=false;break;
 if(!found) out.append(chars[i]);
 return out.toString();
public static String escapeSpecial(String original)
 if(original==null) return "";
 StringBuffer out=new StringBuffer("");
 char[] chars=original.toCharArray();
 for(int i=0;i<chars.length;i++)
 boolean found=true;
 switch(chars[i]) {
 case 38:out.append("&"); break; //&
 case 198:out.append("Æ"); break; //Æ
 case 193:out.append("Á"); break; //Á
 case 194:out.append("Â"); break; //Â
 case 192:out.append("À"); break; //À
 case 197:out.append("Å"); break; //Å
 case 195:out.append("Ã"); break; //Ã
 case 196:out.append("Ä"); break; //Ä
 case 199:out.append("Ç"); break; //Ç
 case 208:out.append("Ð"); break; //Ð
 case 201:out.append("É"); break; //É
 case 202:out.append("Ê"); break; //Ê
 case 200:out.append("È"); break; //È
 case 203:out.append("Ë"); break; //Ë
 case 205:out.append("Í"); break; //Í
 case 206:out.append("Î"); break; //Î
 case 204:out.append("Ì"); break; //Ì
 case 207:out.append("Ï"); break; //Ï
 case 209:out.append("Ñ"); break; //Ñ
 case 211:out.append("Ó"); break; //Ó
 case 212:out.append("Ô"); break; //Ô
 case 210:out.append("Ò"); break; //Ò
 case 216:out.append("Ø"); break; //Ø
 case 213:out.append("Õ"); break; //Õ
 case 214:out.append("Ö"); break; //Ö
 case 222:out.append("Þ"); break; //Þ
 case 218:out.append("Ú"); break; //Ú
 case 219:out.append("Û"); break; //Û
 case 217:out.append("Ù"); break; //Ù
 case 220:out.append("Ü"); break; //Ü
 case 221:out.append("Ý"); break; //Ý
 case 225:out.append("á"); break; //á
 case 226:out.append("â"); break; //â
 case 230:out.append("æ"); break; //æ
 case 224:out.append("à"); break; //à
 case 229:out.append("å"); break; //å
 case 227:out.append("ã"); break; //ã
 case 228:out.append("ä"); break; //ä
 case 231:out.append("ç"); break; //ç
 case 233:out.append("é"); break; //é
 case 234:out.append("ê"); break; //ê
 case 232:out.append("è"); break; //è
 case 240:out.append("ð"); break; //ð
 case 235:out.append("ë"); break; //ë
 case 237:out.append("í"); break; //í
 case 238:out.append("î"); break; //î
 case 236:out.append("ì"); break; //ì
 case 239:out.append("ï"); break; //ï
 case 241:out.append("ñ"); break; //ñ
 case 243:out.append("ó"); break; //ó
 case 244:out.append("ô"); break; //ô
 case 242:out.append("ò"); break; //ò
 case 248:out.append("ø"); break; //ø
 case 245:out.append("õ"); break; //õ
 case 246:out.append("ö"); break; //ö
 case 223:out.append("ß"); break; //ß
 case 254:out.append("þ"); break; //þ
 case 250:out.append("ú"); break; //ú
 case 251:out.append("û"); break; //û
 case 249:out.append("ù"); break; //ù
 case 252:out.append("ü"); break; //ü
 case 253:out.append("ý"); break; //ý
 case 255:out.append("ÿ"); break; //ÿ
 case 162:out.append("¢"); break; //¢
 default:
 found=false;
 break;
 if(!found)
 if(chars[i]>127) {
 char c=chars[i];
 int a4=c%16;
 c=(char) (c/16);
 int a3=c%16;
 c=(char) (c/16);
 int a2=c%16;
 c=(char) (c/16);
 int a1=c%16;
 out.append("&#x"+hex[a1]+hex[a2]+hex[a3]+hex[a4]+";");
 else
 out.append(chars[i]);
 return out.toString();

hi Dan, thanks for asking
I did this in the end..
<cfscript>
// function cleantext(string) {
// string = "" & string;
// string = Replace(string, chr(13) & chr(10) & chr(13) & chr(10), "", "all");
// string = Replace(string, chr(13) & chr(10), " ", "all");
// string = string & "";
// return string;
* HtmlEscape in Java, which is compatible with utf-8
* @author Ulrich Jensen, http://www.htmlescape.net
* Feel free to get inspired, use or steal this code and use it in your
* own projects.
* License:
* You have the right to use this code in your own project or publish it
* on your own website.
* If you are going to use this code, please include the author lines.
* Use this code at your own risk. The author does not warrent or assume any
* legal liability or responsibility for the accuracy, completeness or usefullness of
* this program code.
function cleantext(string) {
private static char[] hex={'0','1','2','3','4','5','6','7','8','9','a','b','c','d','e','f'};
 * Method for html escaping a String, for use in a textarea
 * @param original The String to escape
 * @return The escaped String
public static String escapeTextArea(String original)
 return escapeSpecial(escapeTags(original));
 * Normal escape function, for Html escaping Strings
 * @param original The original String
 * @return The escape String
public static String escape(String original)
 return escapeSpecial(escapeBr(escapeTags(original)));
public static String escapeTags(String original)
 if(original==null) return "";
 StringBuffer out=new StringBuffer("");
 char[] chars=original.toCharArray();
 for(int i=0;i<chars.length;i++)
 boolean found=true;
 switch(chars[i])
 case 60:out.append("<"); break; //<
 case 62:out.append(">"); break; //>
 case 34:out.append("""); break; //"
 default:found=false;break;
 if(!found) out.append(chars[i]);
 return out.toString();
public static String escapeBr(String original)
 if(original==null) return "";
 StringBuffer out=new StringBuffer("");
 char[] chars=original.toCharArray();
 for(int i=0;i<chars.length;i++)
 boolean found=true;
 switch(chars[i])
 case '\n': out.append(" "); break; //newline
 case '\r': break;
 default:found=false;break;
 if(!found) out.append(chars[i]);
 return out.toString();
public static String escapeSpecial(String original)
 if(original==null) return "";
 StringBuffer out=new StringBuffer("");
 char[] chars=original.toCharArray();
 for(int i=0;i<chars.length;i++)
 boolean found=true;
 switch(chars[i]) {
 case 38:out.append("&"); break; //&
 case 198:out.append("Æ"); break; //Æ
 case 193:out.append("Á"); break; //Á
 case 194:out.append("Â"); break; //Â
 case 192:out.append("À"); break; //À
 case 197:out.append("Å"); break; //Å
 case 195:out.append("Ã"); break; //Ã
 case 196:out.append("Ä"); break; //Ä
 case 199:out.append("Ç"); break; //Ç
 case 208:out.append("Ð"); break; //Ð
 case 201:out.append("É"); break; //É
 case 202:out.append("Ê"); break; //Ê
 case 200:out.append("È"); break; //È
 case 203:out.append("Ë"); break; //Ë
 case 205:out.append("Í"); break; //Í
 case 206:out.append("Î"); break; //Î
 case 204:out.append("Ì"); break; //Ì
 case 207:out.append("Ï"); break; //Ï
 case 209:out.append("Ñ"); break; //Ñ
 case 211:out.append("Ó"); break; //Ó
 case 212:out.append("Ô"); break; //Ô
 case 210:out.append("Ò"); break; //Ò
 case 216:out.append("Ø"); break; //Ø
 case 213:out.append("Õ"); break; //Õ
 case 214:out.append("Ö"); break; //Ö
 case 222:out.append("Þ"); break; //Þ
 case 218:out.append("Ú"); break; //Ú
 case 219:out.append("Û"); break; //Û
 case 217:out.append("Ù"); break; //Ù
 case 220:out.append("Ü"); break; //Ü
 case 221:out.append("Ý"); break; //Ý
 case 225:out.append("á"); break; //á
 case 226:out.append("â"); break; //â
 case 230:out.append("æ"); break; //æ
 case 224:out.append("à"); break; //à
 case 229:out.append("å"); break; //å
 case 227:out.append("ã"); break; //ã
 case 228:out.append("ä"); break; //ä
 case 231:out.append("ç"); break; //ç
 case 233:out.append("é"); break; //é
 case 234:out.append("ê"); break; //ê
 case 232:out.append("è"); break; //è
 case 240:out.append("ð"); break; //ð
 case 235:out.append("ë"); break; //ë
 case 237:out.append("í"); break; //í
 case 238:out.append("î"); break; //î
 case 236:out.append("ì"); break; //ì
 case 239:out.append("ï"); break; //ï
 case 241:out.append("ñ"); break; //ñ
 case 243:out.append("ó"); break; //ó
 case 244:out.append("ô"); break; //ô
 case 242:out.append("ò"); break; //ò
 case 248:out.append("ø"); break; //ø
 case 245:out.append("õ"); break; //õ
 case 246:out.append("ö"); break; //ö
 case 223:out.append("ß"); break; //ß
 case 254:out.append("þ"); break; //þ
 case 250:out.append("ú"); break; //ú
 case 251:out.append("û"); break; //û
 case 249:out.append("ù"); break; //ù
 case 252:out.append("ü"); break; //ü
 case 253:out.append("ý"); break; //ý
 case 255:out.append("ÿ"); break; //ÿ
 case 162:out.append("¢"); break; //¢
 default:
 found=false;
 break;
 if(!found)
 if(chars[i]>127) {
 char c=chars[i];
 int a4=c%16;
 c=(char) (c/16);
 int a3=c%16;
 c=(char) (c/16);
 int a2=c%16;
 c=(char) (c/16);
 int a1=c%16;
 out.append("&#x"+hex[a1]+hex[a2]+hex[a3]+hex[a4]+";");
 else
 out.append(chars[i]);
 return out.toString();
</cfscript>
<cfset cleanedtext = cleantext(dirtytext)>
Although actually I also ended up changing my charset of my tables to utf8 (it was latin_swedish) and that seems to have solved the head issue (with special characters (bullet points i think it was) throwing an error when inserting them in the db)

How to turn waste into a sundry stock item in SAP B1

Similar Messages

Maybe you are looking for