How to Turn Your Mac into a Wireless Access Point?

How do i Turn my Mac into a Wireless Access Point in my home? even a link to where it tells me step by step would be great thanks!

Click here and follow the instructions.
(44739)

Similar Messages

Anyone know how to set up mac as a wireless access point?

thats pretty much my question, i wanna access the internet on my nintendo DS and Wii

Hello and Welcome to Apple Discussions.
Although I'm not familiar with the Nintendo DS you can use the iMac as a Wireless Access Point by going Apple Menu > System Preferences > Sharing > and selecting Share Connection from: popup menu: however you connect and the choose Airport to share to.
This article refers.
Merry Christmas
mrtotes

How to Turn Your Mac into a FireWire Hard Drive

I followed these instructions:
http://www.ehow.com/how2160597hard-drive-quick-data-transfer.html
and it worked great, I was able to use my macbook as a hard drive and quickly copies files to it. But I'm concerned that anyone with a firewire cable and a mac can easily get at my files, and that having to log into my laptop is useless. Does anyone now a way to password protect/restrict access to my macbook via a firewire?
Thanks!

Thanks. To enable Open Firmware Password I found this article:
http://support.apple.com/kb/HT1352
But enabling it blocks many other important start up troubleshooting task, such as starting up from a Diagnostic disc. It would be in the interest of security if I could password protect Target Disk Mode, because anyone can quickly get my files with just a firewire cable, but still allow the other start up task. So now I must decide between security and the ability to trouble shoot my computer if it doesn't start. I don't like having to choose between the two.

How can I get alerts if a Wireless Access Point has been disconneted from the network?

How can I get alerts if a Wireless Access Point has been disconneted from the network?
Is it possible to get alerts via email from the WLC or WCS if Access-Point has been removed from the network?
Thanks in advance.

Hi,
The below link will answer ur question!!
http://www.cisco.com/en/US/docs/wireless/wcs/7.0/configuration/guide/7_0event.html#wp1229996
Please dont forget to rate the usefull posts!!
Regards
Surendra

How to Turn your iPad into a WiFi router for your laptop?

how to Turn my iPad into a WiFi router for your laptop?

Chris CA wrote:
iPads have no tethering abilities either.
I know, but I still don't know what the OP was asking.

How do you remove a manually configured wireless access point on the iphone 4S?

I have manually configured my iPhone 4s to point to a wireless access point that I no longer use. How do I delete it from the list of access points on my iPhone?

You can only "Forget this Network" while actually connected to the network, so ignore iamjeremi's post. Other than restoring your phone as a new device, you can't if you cannot connect to the network anymore.

How do I configure WRT54G as a wireless access point?

Ater a whole series of problems related to Vista, a WAP54G, Airport xpress, wireless printers, etc. plus at least three hours on the phone with Linksys tech support acessing my computer remotely and still not fixing the problems, I dumped my WRT54GC for a Belkin-N router. I set it up over the weekend and slowly regained internet access, then the pinter, then the Airports.
I still would like to have an access point because my signal strength even with the new N router is too weak downstairs to allow my PS3 to connect to it. I cannot figure out how to configure the WAP54G to make it work. I want to take a shot with the WRT54GC. From what I've read, I should be able to do it.
I can get into the router (referring to the Linksys) no problem. I can reconfigure it to an extent, changing the IP address to the recommended 192.168.1.2. I do this by running an ethernet cable from my PC to the router. Howver, after changing the IP address in the router I can't get into it any more using the new IP address. When I attach teh Linksys router to the Belkin I can't get in either.
Both the Linksys and the Belkin use 192.168.1.1 as the default IP address for each device.
I would like to know what settings I need to change i nteh WRT54G to turn it ino an access point -- an extenson of my existing network with teh Belkin router attached to the Comcast modem. I have looked at various how-to's and they all seem to assume I am connecting the two routers with an ethernet cable. If it's not clear at this point, I'd like to connect them wirelessly.
Thanks.

Thanks so much for the reply.
I was working with it all last night and somethign strange happened. After reading some other info on the internets, I changed the IP address on the WRT to 192.168.2.1. It updated, I then ran the wire from the Belkin to the WRT, I typed in 192.168.2.1, it took me to the Linksys setup page, but when I clicked "wireless" in the WRT setup, it took me to the Belkin setup page. How in the world did that happen?
Armed with tis new info, I did a hard reset on the WRT -- assuming it would change the WRT back to 192.168.1.1 -- got into the setup, turned off DHCP, left the IP as .1.1, and then wired it again into the Belkin. I can now get into the setup of either one.
Here's the thing: I don't want the two routers wired together. I want to move the WRT downstairs so a PS3 can pick up the signal. I want the WRT to wirelessly relay that signal to the Belkin to get the PS3 onto the net. I can't run a wire from the Belkin to the WRT.
I've read conflicting reports about whether the WRT can do this. Other sites suggest adding 3rd party firmware to add that functionality but that will definitely push the bounds of my abilities and likely exceed them. So, can the WRT even function in this way?
Inre the WAP, I don' know why but my ability to access the setup menu via 192.168.1.245 is very hit or miss -- much miss than hit. It makes no sense unless there is a bad connection somewhere because I hard reset, wire it to my laptop, put in the IP, and time out 19 times out of 20. I've got the MAC address for the router, and I think I know I want it to function as a repeater, but I've not been able to get that working right eihter.
Thanks for any further reply.

How to turn your imac into just a external monitor

Hi I was told I could use my IMAC 27" late 2009 as a external monitor for my Mac Book Pro I just got. I bought a thunderbolt cable but it doesnt work. Is there a command I need to use on the imac to act as a external monitor ?

Hi, not sure a TB cable works or not...
To use an iMac (27-inch, Mid 2010) or iMac (27-inch, Late 2009) in Target Display mode with another computer as the source:
Make sure both computers are turned on and awake.
Connect a male-to-male Mini DisplayPort cable to the Mini DisplayPort on each computer. The 27-inch iMac will enter Target Display mode and display content from the source computer.
Note: If you are connecting two 27-inch iMacs, connect a Mini DisplayPort cable to each computer and press Command + F2 on the 27-inch iMac keyboard that you will use as an external display.
To leave Target Display mode, press Command + F2 on the keyboard of the 27-inch iMac that is in Target Display mode. To return to Target Display mode, press Command + F2 again.
http://support.apple.com/kb/HT3924

How frequently does your Mac go on the fritz?

Today, I right clicked on a file on my desktop. It didn't respond at first, so I right-clicked again and then the beach ball appeared and it stayed that way. I think it was Finder stalling out. I tried switching and launching other programs, tried logging out, and finally tried CMD-option-Esc. All of them didn't work. Finally I was forced to hold down the power button to force shut down the system. Booted it back up and everything was back to normal again.
This is the first time this has ever happened since I recieved my Mini around early April. So I'm just doing a reality check with this post. This is my first Mac.
How frequently does your Mac act up to the point where you are forced to force shut down or pull the plug (the absolute last resort)?

Even then, Peter's advice may be a little bit over the top. There a loads of Macs out there that rarely get their permissions fixed, probably don't have cron tasks run at all, that don't have copies of any of the general purpose utilities such as OnyX or Cocktail, and where the users don't have crashes or kernel panics either.
The real skill in maintaining OS X is to resist doing things that you don't need to do, because it largely looks after itself. From time to time, you might notice a problem, the symptoms of which will generally help determine what needs to be done in order to rectify it.
But if a user is determined to do anything routinely, it should not be to alter the general use of the system (ie, not to suddenly decide to leave it on 24/7 not sleeping so the cron tasks can run), but to use MacJanitor maybe once a month to do the daily, weekly and monthly tasks all in one go, and to fix permissions after an install that has asked for an admin password. The user might also be wise to keep a copy of OnyX, Cocktail or YASU (YASU being the best for the novice user because it is very difficult to misuse) and to use it from time to time as and when the system exhibits poor overall performance or when it has trouble opening or running applications.
Which is not to really contradict Peter's advice, but to say that much that is said on the subject of maintaining Macs and MacOS in good working order is overstated. A low-key/light demand attitude to this aspect of caring for systems is typically rather better - not least because it's typically not a cron task or a permission fault that causes a problem - more commonly hacks, hardware/peripherals or software.

I made a picture collage in pages from the pictures in iPhoto. You used to be able to print and then say save as a jpeg to iPhoto and that option is gone. How do you turn your document into a jpeg now.

I made a picture collage in pages from the pictures in iPhoto. You used to be able to print and then say save as a jpeg to iPhoto and that option is gone. How do you turn your document into a jpeg now?

If you chose print, you can save as PDF. If you open the saved PDF in preview, you can save as JPEG, GIF, PNG. FYI you can crop in preview.
Another option is you could use command + shift + 4 to do a screen shot of a specific part of of the screen.

HT4913 How to add My Mac into my I Tunes account.

Hi, I want to download an App which I purchased through my iPad into my Mac Pro.
So, I noticed that my Mac is not yet registered to my device list, even though it is already authorised.
How to add the Mac into the device List? I can only see how to remove a device but not adding one.
Please help to give step by step guidance, since I tried to follow the Apple Support article and I followed it but could find the "add device".

Not sure what you mean.
Just sign into your account on your computer. Go to Quick Links>Purchased in the iTunes store to download past purchases or connect your iPad and click File>Device Transfer Purchases
iphone/ipod/ipad apps do not work on a computer at all.

Hi guys i used boot camp and turned my mac into windows and i wanted to play a pc game on the windows and i cant find a proper program to actually setup the game someone help me please

hi guys i used boot camp and turned my mac into windows and i wanted to play a pc game called guild wars 2 and i cant find a proper program to actually setup the game

Only if you decide to share with us your particular situation. Guild Wars should install and run like any other Game. Other than the Game Installer, Games don't need some other installer to make them work. Only someone who reads the instructions for the proper installation.

HT201263 how to place your device into recovery mode without home button?

How to place your device into recovery mode without home button?

Try these programs:
RecBoot: Easy Way to Put iPhone into Recovery Mode
The Firmware Umbrella - TinyUmbrella

What peripherals do you need to turn your iPhone into a conference room speakerphone?

What peripherals do you need to turn your iPhone into a conference room speakerphone system?
If you buy a separate conference mic and a speaker, can they somehow work together off the iPhone headphone jack like a huge set of group earphones? What if you want to connect 2 mics and a speaker?
Do you have to be very careful that they can all be attached somehow at the same time?
Are there reasonably priced conference room speakerphone peripherals the work well together that you would recommend?
Steve

Why don't you contact Apple and find out? Certainly if you can find your way around the internet to have been able to find this forum, you can certainly find the number for AppleCare.

How can I set up a guest access point with a Time Capsule and an Airport Extreme? I am using a Telus router with the Time Capsule used as a wireless access point (bridge mode). I don't want the guest access point to have access to my network.

How can I set up a guest access point with a Time Capsule and an Airport Extreme? I am using a Telus router with the Time Capsule used as a wireless access point (bridge mode). I don't want the guest access point to have access to my network.

The Guest Network function of the Time Capsule and AirPort Extreme cannot be enabled when the device is in Bridge Mode. Unfortunately, with another router...the Telus...upstream on your network, Bridge Mode is indicated as the correct setting for all other routers on the network.
If you can replace the Telus gateway with a simple modem (that performs no routing functions), you should be able to configure either the Time Capsule or the AirPort Extreme....whichever is connected to the modem....to provide a Guest Network.

How to Turn Your Mac into a Wireless Access Point?

Similar Messages

Maybe you are looking for