How to type a Hash?

Hi everyone,
A simple question - how do I type a hash? Up untill now I have been using the character pallet and dragging the hashes into place, but this is a pain. I suspect there is a keystroke for this but I don't know it.
Sam

You can also bring up the keyboard viewer. Turn it on in System Preferences –> International –> Input Menu. (BTW if you need to make it bigger click the green dot in the upper left corner.)
Then you can hold down the different modifier keys and see what they will do for you.
Part of the issue here is that us folks in the US often don't know that overseas keyboards have different default setups.

Similar Messages

Is there a way to change the type of hash for passwords in active direcroty?

I would like to know what type of hash used for active directory passwords and if there is a way to change the type of hash.

Hi,
Windows generates and stores user account passwords by using two different password representations, generally known as "hashes." When you set or change the password for a user account to a password that contains fewer than 15 characters, Windows generates
both a LAN Manager hash (LM hash) and a Windows NT hash (NT hash) of the password.
You can configure the type to only store the stronger NT hash of your password.
How to prevent Windows from storing a LAN manager hash of your password in Active Directory and local SAM databases
http://support.microsoft.com/kb/299656/en-us
Regards,
Mandy
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

How many types of internal tabels?

hi all,
how many types of internal tbels ,
how they are differetiate ?
regards.
raj

Hi,
Three Types of Internal Table:
1.Standard Table
2.Sorted Table
3.Hashed Table
Standard Table - the most commonly used type of table.
The key access to a standard table uses a sequential search. The time required for an access is linearly dependent on the number of entries in the internal table.
You should usually access a standard table with index operations.
You can sort and resort this table anytime. You can have duplicate records in them. Recommend that when accessing these tables, you sort them by a key and then READ via a BINARY SEARCH - better performance. When you write to this table the record is "appended" to the end of the table. In order to maintain the sort sequence (if any) you must use the SORT command again.
Sorted table - this table has a defined sort sequence. You cannot resort. You can have duplicates.
The table is always stored internally sorted by its key. Key access to a sorted table can therefore use a binary search. If the key is not unique, the entry with the lowest index is accessed. The time required for an access is logarithmically dependent on the number of entries in the internal table.
Index accesses to sorted tables are also allowed. You should usually access a sorted table using its key.
When you READ these tables, SAP automatically tries to use a BINARY SEARCH. Because you use a Binary Search, the retrieval time isexpodential to the number of records. When you write a record to this table the table is resorted.
Hashed Table - this table has a defined key.
The table is internally managed with a hash procedure. All the entries must have a unique key. The time required for a key access is constant, that is it does not depend on the number of entries in the internal table.
When you write to the table it uses a hashing algorithm to identify where the record is stored (think if this as writing the location of a page in an index of a book). When you READ this table the system looks up this "index" and retrieves the record. Because of this the retrieval time is constant. Writing to this type of table takes the most time as it needs to calculate the hashing algorithm.
Personally I generally use Standard Tables as they are the most flexible table available. It lets me resort my data anyhow I like any time I like. I very rarely use a Sorted Table.
I use Hashed Tables as "buffer" tables. Let's say for example I want to retrieve HR data for a number of sales reps. To get HR data I need to use FM 'HR_READ_INFOTYPE'. This takes time. So what I do is read my hashed table to see if I have already got the data (very quick). If I don't have the data, I hit the FM and update my hashed table for next time. By using the hashed table in this way I reduce the number of FM calls I need to make.
/people/harry.dietz/blog/2005/10/28/performance-improvement-hints-3-internal-table--fill-and-read
http://www.sap-img.com/abap/what-are-different-types-of-internal-tables-and-their-usage.htm
http://help.sap.com/saphelp_erp2005/helpdata/en/fc/eb35de358411d1829f0000e829fbfe/frameset.htm
Regards,
Padmam.

How meny types of internal tables?

how meny types of internal tables? can any one explain brifly what r their use?

INTERNAL TABLES:
Internal tables are holds the data which is having the same structure and storing it in working memory in ABAP. The data is stored line by line in the memory. The main purpose of internal table is for storing and formatting data from a database table within a program. It is used to minimize the DB access time in report programs.
Internal table are dynamic data objects, since they can contain any number of lines of a particular type. The maximum memory that can be occupied by an internal table (including its internal administration) is 2 gigabytes.
Types of Internal Tables :
1. Standard Internal Tables :
Standard tables have an internal linear index. The system can access records either by using the table index or the key. The response time for key access is proportional to the number of entries in the table. This means that standard tables can always be filled very quickly, since the system does not have to check whether there are already existing entries. WE can fill a standard table by appending lines (ABAP APPEND statement), and read, modify and delete entries by specifying the index (INDEX option with the relevant ABAP command).
2. Sorted tables :
Sorted tables are always saved sorted by the key. They also have an internal index. The system can access records either by using the table index or the key. The response time for key access is logarithmically proportional to the number of table entries, since the system uses a binary search. Entries are inserted according to the sort sequence defined through the table key.
3. Hashed tables :
Hashed tables have no linear index. You can only access a hashed table using its key. The response time is independent of the number of table entries, and is constant, since the system access the table entries using a hash algorithm. we cannot access a hashed table using its index.

How many types of authentications in sharepoint and how to implement those authentication in sharepoint?

Hi All,
How many types of authentications in sharepoint and how to implement those authentication in sharepoint?
can any one explain the above things with examples?
Thanks in Advance!

In addition to
A Sai Gunaranjan you can also check this URL for Sharepoint 2010:
http://technet.microsoft.com/en-us/library/cc288475(v=office.14).aspx
http://www.codeproject.com/Tips/382312/SharePoint-2010-Form-Based-Authentication
***If my post is answer for your query please mark as answer***
***If my answer is helpful please vote***

How to use one hash table inside another hash table

Hi everyone,
Any example of hash table inside another hash table.
Can one here help me how to write one hash table inside another with repeating keys for the first hash table.
Thanks,
kanty.

Do you mean you want the 'value' entries in a hash table to themselves be hash tables? Easy but this often indicates a design flaw.
Hashtable<String,<Hashtable<String,Value>> fred = new Hashtable<String,<Hashtable<String,Value>> ();But what do you mean by "with repeating keys for the first hash table"?
Edited by: sabre150 on Jul 2, 2010 10:11 PM
Looks like you have already handled the declaration side in your other thread. I suspect you should be writing your own beans that hold the information and these beans would then be stored in a Map. The problem I have is that your description is too vague so I can't be certain.

How many types of tables exists and what are they in data dictionary?

hi,
How many types of tables exists and what are they in data dictionary?
regards.

Hello Liu,
Please search in forum before posting any question .
anyhow check the below link :
http://web.mit.edu/sapr3/dev/sap_table_types.htm
Thanks
Seshu

How many types of ports are there which we use for data transfe in ale/idoc

friends let me know how many types of ports are there which we use for transfering
data in ale/idocs?

Hello,
you can use file port,trnasactional RFC port.FI you are using IDOC-XML conversion combination,then you can XML port also.
Thanks

How many types of errors in process chian

Hello all,
Kindly tell me How many types of all possible errors we can face when we will monitoring the process chain.please reply with all errors and solution for it.its too urgent.

Please search...this has been discussed many times and there is also a blog on it.

How to type the rupee symbol in hp pavilion g4?

My HP Pavilion notebook's model is G4, TX series 1202. the key board shows the rupee symbol (bottom right) on the same key as the $ and 4. but i am unable to figure out how to type!
any pointers?

Hi,
I think you need font too. Here is another suggestion:
http://www.quickonlinetips.com/archives/2011/07/type-indian-rupee-symbol-with-keyboard-key/
Regards,
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

How many types of projects exist in sap bw

i heard that there are two types of projects
1.implementation project
2.support project
and what about up gradation project, migration project, and i want to know what all the projects exists and there processes..
if not possible please provide the link to navigate me to there

sb92075 wrote:
how many types of searching is in dbms ?42(What was the question, again? ;-) )
Learn something new every day. I thought there were only 2 - successful (aka correct) and failed (aka wrong).

How to type spanish characters

Have Ideapad S210. Does anyone know how to type spanish characters. I have regular USA keyboard. Thanks.
Solved!
Go to Solution.

Which windows ?
normally you go in control panel and find "language" to add new language for keyboard

How many types of inbound process r there

how many types of inbound process r there for a inbound idoc?

Hi,
Creating an Inbound Process Code
The inbound process code, that is, its attributes, indicates how an inbound IDoc is processed. A process code has the following attributes:
·        Processing type (for example, should the inbound function module be called immediately, or should a workflow or work item be started?);
Standard: "ALE, function module called directly"
·        Name of inbound function module;
·        Error processing attributes (objects and events; see the section on objects, and so on, for error handling);
·        Application object type used for ALE links;
¡        the object type created or changed by the inbound function module. Example: An inbound ORDERS IDoc, containing a customeru2019s purchase order, creates a customer order in the receiving SAP System. Here the application object type is BUS2032, the object type for customer orders in the BOR (Business Object Repository).
·        The application event to be triggered (dealt with in the section on advanced techniques) is not generally used.
For an example, have a look at the process code MATM used for material master data.
Reward If Helpfull,
Naresh

How many types of mappings in sap xi

hi,
how many types of mappings in sap xi,what are there can u explain me
bye
phenix

hi suresh,
There are 4 types of mapping in XI
1. Graphical
2. XSLT
3. java
4. ABAP.
There is no hard and fast rule for using the mapping techniques. But, I will try to put things in the right perspective for you.
Graphical Mapping is used for simple mapping cases. When, the logic for your mapping is simple and straight forward and it does not involve any complex logic.
Java and XSLT mapping are used when graphical mapping cannot help you.
When the choice is between Java And XSLT, XSLT is simpler than java mapping and easier. But, it has its drawbacks. One among them being that you cannot use Java APIs and Classes in it. There might be cases in your mapping when you will have to perfrom something like a properties file look up or a DB lookup, such scenarios are not possible in XSLT and so, when you want to use some specific Java API's you will have to go for Java Mapping.
Java Mapping uses 2 types of parsers. DOM and SAX. DOM is easier to use with lots of classes to help you create nodes and elements, but , DOM is very processor intensive.
SAX parser is something that parses your XML one after the other, and so is not processor intensive. But, it is not exaclty easy to develop either.
For further info on each of the mapping, refer to these links,
Graphical Mapping,
http://help.sap.com/saphelp_nw04/helpdata/en/6d/aadd3e6ecb1f39e10000000a114084/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/43/c4cdfc334824478090739c04c4a249/content.htm
XSLT Mapping
http://help.sap.com/saphelp_nw04/helpdata/en/73/f61eea1741453eb8f794e150067930/content.htm
http://www.w3.org/TR/xslt20/
Java Mapping
http://help.sap.com/saphelp_nw04/helpdata/en/e2/e13fcd80fe47768df001a558ed10b6/content.htm
DOM parser API
http://java.sun.com/j2se/1.4.2/docs/api/org/w3c/dom/package-frame.html
Also, check this thread for more info,
Different types of Mapping in XI
Regards,
Bhavesh

How many types i can import as file in FLA and what's the differences ??

Hello
How many types i can import as file in FLA and what's the differences ??

you wouldn't import a .as file.
you could open it in the flash ide (or any text editor) and edit it.
you could create a fla and assign a document class which flash will compile into your swf.
you could create a library object in a fla, tick export for actionscript and assign a class that flash will compile that class into your swf.
you could instantiate a class object (using the "new" constructor) in a flash movieclip timeline or in another class file and flash will compile that class into your swf.
for Workers to extend a class use something like:
package
import Citizens;
      public class Workers extends Citizens
       protected var baseSalary:Number = 1000;
           public function Workers()
               super();
          public function receivePayment():Number
                return this.baseSalary;

How to type a Hash?

Similar Messages

Maybe you are looking for