How to type Apple symbol?

In the past I've used the Option+Shift+k to get the Apple symbol, but now, even in Helvetica that key combination produces the degree symbol.  I know there has to be a key combo that works.

Sounds like you have the US Extended keyboard active instead of the one called US.  Switch back to US and you will find  at the usual place.  (US Extended does not have one)

Similar Messages

  • HOW TO TYPE EURO SYMBOL

    HOW TO TYPE EURO SYMBOL IN ILLUSTRATOR

    And for other symbols; Window > Type > Glyphs is your friend.

  • How to type the symbol ^?

    How to type the symbol ^ on a MB Pro 13' AZERTY keyboard ? Thanks.

    It is really easy: the ^ is above the 6. But I assume you want to use it with a letter like ê : you do this by holding the Alt)option) key while clicking the 6 key, then let go and type the letter you want underneath it.
    I will give some others: alt+e then the letter, alt+u then the letter, etc.
    Another alternative: go to SystemPreferences/Keyboard, check the "show keyboard and character viewers in the menubar", they will stay in the menubar as a little flag. When clicking the flag-icon you can either choose the keyboard layout and see where the characters are or the character panel and there you can choose any character that you want: it will insert the character that you click on the spot where your mousepointer is. I made a short list of "favorites" everytime I used this panel.

  • In Mail 7.3 on my Retina MacBook Pro on OS 10.9.4, how can I type from the keyboard into a mail message using the Apple Symbols font?

    In Mail 7.3 on my Retina MacBook Pro on OS 10.9.4, how can I type from the keyboard into a mail message using the Apple Symbols font?
    When I select the Apple Symbols font from the list accessed from under Format/"Show fonts"/collection-all fonts/Apple Symbol, and then continue typing, I get normal letters, if in a slightly different font.
    How can I type using the Apple Symbol font?  I want to use that font to include keyboard and cursor selections of actual screen symbols to help write easily understood explicit computer lesson emails to my 92 year-old mom from a few hundred miles away.
    Steve

    In Mail 7.3 on my Retina MacBook Pro on OS 10.9.4, how can I type from the keyboard into a mail message using the Apple Symbols font?
    When I select the Apple Symbols font from the list accessed from under Format/"Show fonts"/collection-all fonts/Apple Symbol, and then continue typing, I get normal letters, if in a slightly different font.
    How can I type using the Apple Symbol font?  I want to use that font to include keyboard and cursor selections of actual screen symbols to help write easily understood explicit computer lesson emails to my 92 year-old mom from a few hundred miles away.
    Steve

  • How to remove the '#'symbols for infoobject movement types in bex reporting

    Hi All,
      I have a problem in Bex reporting. The problem is when ever executing the report  that time some of the characteristic values is shown in layout '#' Symbols. i want to remove the '#' valuse in report.
    is it possible please give me step by step procedure for how to remove the '#' Symbols in reporing layout.
    this is very urgent please help to me on this issue.
    Thanks & Regards,
    Guna.

    Hi Guna,
    To achieve this issue, we need to replace the value of ‘#’, we need to change the description while retrieving the data from tables. So we need to write some ABAP code in SE38. Go to RSA1 transaction and go to Info objects tab. Then go to context menu for ‘cProject Key Figures’ as shown below. Click on the ‘Object Overview’ to get the overview of all the info objects. Here you can see the field names which are used to know the table names.
    In SE11, type the table name in ‘Database Table’ field. Now press ‘F4’, then you will get the next screen to select one of the P/Q/S/T tables.
    Now click on the button rounded in the below screen to view the data in the table.
    Now click the execute button or press ‘F8’ to view the records.
    Now go to Tcode: SE38. Create a source code and give some program name for that source code. To write code, you need access key. Contact your BASIS for this.
    Now write the below code for that particular table in which you want to change the value ‘#’ to description ‘Blank’. In the below source code, we are updating particular table, setting the field as ‘Blank’ where it is null or no value. Here the field will automatically get updated to ‘#’ if there is no value or null.
    update /BIC/PXXXXX set /BIC/ZXXXX = 'Blank' where /BIC/ZXXXXX is null or /BIC/ZXXXX = ''.
    if sy-subrc eq 0.
    write 'successful'.
    commit work.
    else.
    write 'unsuccessful'.
    endif.
    OR
    If this # is because of the missing master data than,
    right click that IO -> maintain master
    you will see first row as a blank.
    whatever value you maintain in this row that will come in the report for all Not assigned # values of the master data in the report.
    maintain it according to your requirement, save and activate the master data
    Hope this helps u...
    Regards,
    KK.

  • My iPhone 4 will not turn on and is just displaying the itunes symbol not the apple symbol. How do I fix it?

    My iPhone 4 will not turn on and is just displaying the itunes symbol not the apple symbol. How do I fix it? My phone died and I went to plug it in and it just displayed the itunes logo. It will not turn on at all. I plugged it into my computer in an attempt to connect to itunes with hoped of it turning on, yet nothing popped up as if it wasn't registering. Please help!

    http://support.apple.com/kb/HT1808

  • My Imac is locked with apple symbol and loading sign, how i do fix this?

    my iMac is locked with apple symbol and loading sing since last night, how i do fix this?

    Zap the PRAM and Reset the SMC, then try again.

  • How to type the rupee symbol in hp pavilion g4?

    My HP Pavilion notebook's model is G4, TX series 1202. the key board shows the rupee symbol (bottom right) on the same key as the $ and 4. but i am unable to figure out how to type!
    any pointers?

    Hi,
    I think you need font too. Here is another suggestion:
       http://www.quickonlinetips.com/archives/2011/07/type-indian-rupee-symbol-with-keyboard-key/
    Regards,
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • I was in the middle of downloading an update and my I4 disconnected.  Now I can not reconnect to itunes.  My phone wont power down.  It just has the apple symbol with a bar underneath. How do I fix this.

    I was in the middle of downloading an update and my I4 disconnected. Now I can not reconnect or power down my phone.  It has the apple symbol and a bar underneath.  How can I fix this?

    Dear Terence, Thank you for responding to my problem. In no way did I mean to discredit the dedication and work of the volunteers assisting Apple customers and if I did, I apologize. I am just so tired of having to purchase a new computer every other year as so it seems.  I know they are not perfected, but it is very frustrating when they just go kaput.  I am always the first person to appreciate a kind deed and do appreciate your support and help regarding this unfortunate issue. My iPad was the greatest computer I've had until this morning and was disappointed.  Again, thank you for your concern and for your help. It is greatly appreciated. 
    Sincerely,
    Shakabird1

  • How to type @ sign on Japanese apple wireless keyboard?

    Hi:
    I have recently bought apple wireless japanese version, everything is ok only that I am unable to find how to type @ sign. Anyone using the same keyboard, can you please help?
    Regards,
    Nauman

    Isn't it on the key next to P?
    http://en.wikipedia.org/wiki/Keyboard_layout#Japanese

  • My Ipod has frozen showing apple symbol and bar on screen, how do i fix it

    my ipod touch has frozen showing the apple symbol anb a bar on the screen how do i fix it

    Hello Norm,
    Try a hard reset of the iPod.  To do this, press and hold both the Sleep/Wake and Home buttons together long enough for the Apple logo to appear again.  Keep in mind, this troubleshooting procedure may take a few attempts.
    B-rock

  • How do i get  my i phone to show more than just the apple symbol?

    how do i get  my i phone to show more than just the apple symbol?

    Welcome to the Apple Community.
    AirPlay Mirroring requires a second-generation Apple TV or later, OS X 10.8 or better and is supported on the following Mac models: iMac (Mid 2011 or newer), Mac mini (Mid 2011 or newer), MacBook Air (Mid 2011 or newer), and MacBook Pro (Early 2011 or newer). It also requires the computer to be using wi-fi.

  • How can I type the symbol for greater than or equal to

    I wish to type the symbol for greater than or equal to in an equation but my keyboard does not have such a symbol

    Mathematical Operators - 2200-22FF
    :≥     ≥ 8805 GREATER-THAN OR EQUAL TO
    :http://www.sql-und-xml.de/unicode-database/mathematical-operators.html
    If this is for HTML use ≥ to create ≥
    you can bring up CharMap (charmap.exe)
    go down 11 windows (of 10 rows each) and it is on bottom row
    You should be able to type as Alt+8805 on the Numeric keypad (not number row)
    or on laptop with NumLock off as Fn+Alt+8805
    but that is not working for me and I verified that hex(x2265) and decimal (8805)
    values are equivalent.

  • Lost the top line where the apple symbol is located. how do I get it back?

    I lost the top line (the one with the Apple symbol) and can not get it back.
    Thanks

    I assume you are in Fullscreen Mode.
    Hit the escape (ESC) key

  • My iphone 4 is locked on a black screen with apple symbol and loading sign since last night, how do i fix this?

    my iphone 4 is locked on black screen with apple symbol and loading symbol since last night

    You need to restore the iOS using iTunes. Place the device into Recovery Mode and Restore the device
    Read here for instruction > http://support.apple.com/kb/HT1808

Maybe you are looking for