How to type diactrics (special characters)

Short of installing a localized version of OS X, is there any way to type diacritics on a Mac? I'm mostly intersted in Polish special characters: ą ę ł ó ś ż ż.

In the "Input Menu" of "International" Systems Preference, turn on "Character Palette" and "Keyboard Viewer", and enable "Show input menu in menu bar" (it's at the bottom of the window). This will put a flag icon in the menu bar to select the Keyboard Viewer and/or the Character Palette.
For the simpler diacriticals ( ` ´ ¨ ˆ ˜ ) hold down Option, press the diacritical key, as shown in the Keyboard Viewer), release Option, then type the character.
` e u i n will give ` ´ ¨ ˆ ˜
For other diacriticals you will need the Character Palette. "Latin" under "European Scripts" should have what you need. You can use the "Add to Favorites" function (press the little gear at the lower-left) for the ones you use most, then select "Favorites".

Similar Messages

How can I display special characters of NonEuropean languages (French, Italian, Spanish, German and Portuguese.) using import string mechanism

I would like to translate the User Interface of my application to French, Italian, Spanish, German and Portuguese.
When I put special characters in the import string file they showed up as ? (question mark)
The import strings file includes the following parameters for each string: font, text, size and style. (but no field for script)
In order to use a unicode font such as Arial I need to select a french script. But this option is not supported bu LabView (As far as I saw)
A) Is there a font which is directly German/ French etc and not regula font + script parameter?
B) Are there another required step
s for special characters support? (When I put speciual characters in the import string file the showed up as ? question mark)

This was discussed last week in this group- read the previous messages.
Look for the thread "Foreign Languages in Labview"
And recite the mantra
ActiveX is good
ActiveX is holy
All Hail Bill
Those who claim otherwise are heretics and not to be trusted
Actually, in this case the non-ActiveX suggestions may be good.
talia wrote in message
news:[email protected]..
> How can I display special characters of NonEuropean languages (French,
> Italian, Spanish, German and Portuguese.) using import string
> mechanism

How can I distinguish special characters or signs in Doc through VBA?

How can I distinguish special characters or signs in Doc through VBA?
I have a few large documents written in word 2003 format and now I work on them under word 2007.
Such large documents containing lots of special characters. I want to change them into Microsoft 3.0 equation form（It is required by the team). I find no way but using function AddOLEObject and Sendkeys through VBA. Common characters can be added
to equation by function Sendkeys, but the return value of Asc() or AscW() for "double arrow", "in" , " not greater than " such special characters or signs, to name but a few are the same ,i.e., 40 And I cannot distinguish them.
I found the link http://msdn.itags.org/word/44333/ may be of use to me, and the title is:
How to read symbols from a DOC documents! (Microsoft Word)
the original question is
Using function "InsertSymbol", I can insert a symbol into a document. But
how can I read a symbol from a document?
Using "Characters(i).range.text", I can read a char. But when meeting a
symbol, the value of "Characters(i).range.text" is always '('.How can I get the CharacterNumber of the symbol.
And the final answer is :
Hi chenfeng,
Word protects symbols from symbol fonts if you insert them from the "Insert
> Symbol" dialog.
This is done so they aren't changed when you change the font or style. But
it also results in Word reporting AscW( ) = 40 on all of them.
I've posted a macro to "unprotect" them (or to protect them again if you
want) ... just today again in
Newsgroups: microsoft.public.word.vba.customization
Subject: Symbol Characters
Date: Mon, 3 May 2004 11:00:46 -0700
Message-ID: <09f401c43138$8f92f900$[email protected]>
It isn't archived on Google yet, but tomorrow you should be able to simply
copy the message ID into http://www.google.com/advanced_group_search.
Regards,
Klaus
But the link for the macro in the final answer is missing.
Can anyone with kindness help me? Thaks a lot.

Following Cindy Meister's Advice ,I use MathType SDK.
The sample in MathType SDK in the following may be meaningful,but I do not know how the MTEF for cos^^2Theta, MTEF for sin^^2Theta and MTEF for 1 are generated .
It looks much complicated,and I searched the docs in MathType SDK to get a explanation.Is there any function to generate them? I want to use this method to change commaon text mathematical signs( in special character table) and Greek letters and characters
with subscripts and superscripts to Microsoft 3.0 equation form.
Can anyone with kindness help me?
Sub MTEFTextSubstitution()
    Dim MTEFStr1$, MTEFStr2$, MTEFStr3$
    Dim stat
    'MTEF for cos^^2Theta
    MTEFStr1$ = "% MathType!MTEF!2!1!+-" + _
        " % feaaeaart1ev0aaatCvAUfeBSjuyZL2yd9gzLbvyNv2CaerbuLwBLn" + _
        " % hiov2DGi1BTfMBaeXatLxBI9gBaerbd9wDYLwzYbItLDharqqtubsr" + _
        " % 4rNCHbGeaGqiVu0Je9sqqrpepC0xbbL8F4rqqrFfpeea0xe9Lq-Jc9" + _
        " % vqaqpepm0xbba9pwe9Q8fs0-yqaqpepae9pg0FirpepeKkFr0xfr-x" + _
        " % fr-xb9adbaqaaeGaciGaaiaabeqaamaabaabaaGcbaGaci4yaiaac+" + _
        " % gacaGGZbWaaWbaaSqabeaacaaIYaaaaOGaeqiUdehaaa!3B65!"
    'MTEF for sin^^2Theta
    MTEFStr2$ = "% MathType!MTEF!2!1!+-" + _
        " % feaaeaart1ev0aaatCvAUfeBSjuyZL2yd9gzLbvyNv2CaerbuLwBLn" + _
        " % hiov2DGi1BTfMBaeXatLxBI9gBaerbd9wDYLwzYbItLDharqqtubsr" + _
        " % 4rNCHbGeaGqiVu0Je9sqqrpepC0xbbL8F4rqqrFfpeea0xe9Lq-Jc9" + _
        " % vqaqpepm0xbba9pwe9Q8fs0-yqaqpepae9pg0FirpepeKkFr0xfr-x" + _
        " % fr-xb9adbaqaaeGaciGaaiaabeqaamaabaabaaGcbaGaci4CaiaacM" + _
        " % gacaGGUbWaaWbaaSqabeaacaaIYaaaaOGaeqiUdehaaa!3B6A!"
    'MTEF for 1
    MTEFStr3$ = "% MathType!MTEF!2!1!+-" + _
        " % feaaeaart1ev0aaatCvAUfeBSjuyZL2yd9gzLbvyNv2CaerbuLwBLn" + _
        " % hiov2DGi1BTfMBaeXatLxBI9gBaerbd9wDYLwzYbItLDharqqtubsr" + _
        " % 4rNCHbGeaGqiVu0Je9sqqrpepC0xbbL8F4rqqrFfpeea0xe9Lq-Jc9" + _
        " % vqaqpepm0xbba9pwe9Q8fs0-yqaqpepae9pg0FirpepeKkFr0xfr-x" + _
        " % fr-xb9adbaqaaeGaciGaaiaabeqaamaabaabaaGcbaGaaGymaaaa!36A4!"
    Selection.Copy
    'Init API, reset transform
'    If MTUtil.CheckMTDLLVersion = 0 Then Exit Sub
    If Not IsDLLVersionOK() Then Exit Sub
    MTXFormReset
    'first substitution
    stat = MTXFormAddVarSub( _
        mtxfmSUBST_ONE, _
        mtxfmVAR_SUB_PLAIN_TEXT, "<v1>", 0, _
        mtxfmVAR_SUB_MTEF_TEXT, MTEFStr1$, Len(MTEFStr1$), 0)
    If stat <> 0 Then
        MsgBox "1st MTXFormAddVarSub returned: " + Str(stat)
        Exit Sub
    End If
    'second substitution
    stat = MTXFormAddVarSub( _
        mtxfmSUBST_ONE, _
        mtxfmVAR_SUB_PLAIN_TEXT, "<v2>", 0, _
        mtxfmVAR_SUB_MTEF_TEXT, MTEFStr2$, Len(MTEFStr2$), 0)
    If stat <> 0 Then
        MsgBox "2nd MTXFormAddVarSub returned: " + Str(stat)
        Exit Sub
    End If
    'third substitution
    stat = MTXFormAddVarSub( _
        mtxfmSUBST_ONE, _
        mtxfmVAR_SUB_PLAIN_TEXT, "<v3>", 0, _
        mtxfmVAR_SUB_MTEF_TEXT, MTEFStr3$, Len(MTEFStr3$), 0)
    If stat <> 0 Then
        MsgBox "3rd MTXFormAddVarSub returned: " + Str(stat)
        Exit Sub
    End If
    'do the substitution
    stat = TransformGraphicEquation
    If stat <> 0 Then
        MsgBox "TransformGraphicEquation returned: " + Str(stat)
        Exit Sub
    End If
    MTTermAPI
    'Paste new equation
    Selection.Collapse Direction:=wdCollapseEnd
    Selection.PasteSpecial Placement:=wdInLine
End Sub

How to check multiple special characters in instr function sql query.

Hi,
The following special characters are comma(,), slash(/), colan(:)
these special characters i need to be check in instr function.
select SUBSTR(master_title,1,INSTR(master_title,',',1,1)-1) from dual;
Can you please write the query with right answer.
Thanks in advance,
Lakshman.

Why multiple post?
How to check multiple special characters in this query.

How to remove the Special characters like @,#,$ ,..from field

How to remove the Special characters like @,#,$<,..from text field. we nedd to remove any specila char from text field .
ex:text = just#fi%cation@text
the text should be justification.

hi check this ..
data:char(25) value '5#4#2#&1#&',
     char1(9) .
       replace all occurrences of '#' in char with 'and' .
       replace all occurrences of '&' in char with 'num' .
     write: char.
or use this..
data:char(25) value 'test@ing*5#4#2#&1#&',
     char1(9) .
       replace all occurrences of '#' in char with space .
       replace all occurrences of '&' in char with space .
       replace all occurrences of '@' in char with space .
       replace all occurrences of '*' in char with space .
     write: char.
regards,
venkat.

How do you insert special characters with imovie 08?

How do you insert special characters into a project
with imovie 08?

Don't think that would work. Since my "system date" is already set at 2007. I have 2 imports, one has the year as 2048, and the other at 2016!! I don't know where they are getting these dates from, but they are not the system date.
Were the files imported directly from a camcorder or from files already on your hard drive? In the first case the year may have been taken from the time "stamp" recorded when the footage was shot (which may or may not have been correctly set by the user). On the other hand, files imported from the hard drive seem to be keyed to the date the imported file is written to the "Events" folder which, of course, reflects the current system time/date setting. That's why I said you had to then import (re-import) the files from a hard drive source -- i.e., to ensure the DTG would be re-written.

How do I create special characters in 10.5.8

How do I create special characters in 10.5.8, like accents above letters.

Paulfhannan wrote:
like accents above letters.
The most common ones for European languages can be created with the normal US keyboard layout using alt/option dead keys. alt + e, then e gives you é. A list:
http://homepage.mac.com/thgewecke/diacritics.html

How to add more special characters

hello, is there any possibility to add more special
characters ? I know how to use characters from windows, i read that
tutorial, but if i want to add into special characters toolbar from
fireworks is there any chance ?
Because i have a problem with adobe acrobat. If i add a
special characters from windows i get this error "?", but if i
choose to add a character from adobe fireworks, it works fine.

Hi Anubhav,
Please refer in this code:
DATA : INT_VAR TYPE /BI0/OIPOSTXT.
DATA : length TYPE i.
DATA : num type i.
MOVE SOURCE_FIELDS-SGTXT TO INT_VAR.
TRANSLATE int_var TO UPPER CASE .
num = 0.
length = STRLEN( int_var ).
DO length TIMES.
   IF int_var+num(1) CN
   ',<>?/\:;"''ABCDEFGHI JKLMNOPQRSTUVWXYZ!%^&*()__+=1234567890'.
    int_var+num(1) = ''.
   ENDIF.
   num = num + 1.
ENDDO.
condense int_var NO-GAPS.
RESULT = int_var.
Revise that code based on your scenario..Just post here for any queries..
For other solutions, please refer in this thread:
handle invalid char at end of text
Regards,
Loed

How to you enforce special characters under Authentication in the CMC?

Is there a way to to enfoce special characters in the password for user authentication? I do know BO XI R2 SP3 does allow special characters, but I would like to notify users when they get prompt to change their password.

Margaret,
Using the CMC, navigate to the entry entitled "Authentication", next choose the tab "Enterprise".
There are two key options (they appear towards the top), and here is a brief explanation of these:
When you enable the enforce mixed-case passwords option, then it ensures that passwords contain at least two of the following character classes: upper case letters, lower case letters, numbers, or punctuation.
The second option, must contain at least (N) characters stipulates the minimum length that a user can choose for his or her password.
From a practical point of view, I would say that if you have the first option taken (enforce mixed-case), then your next option should be set at no lower than 8.
As far as educating the user, this is done externally from the web page when it presents to the user (the user gets three prompts: old password, new password, and re-type new password). As far as a clue to using at least two of the upper/lower/number/punctuation in their password, I don't know how you communicate that other than an internally circulated "Introduction to Our System" handout and you include this tidbit amongst other details you'd like your users to know, etc, etc.
Thanks,
John

How can I enter special characters in a text title?

Hello to all!
Have been trying to get in a special character [the tick mark] onto a text title on my current project. Had gone to the special character option under EDIT menu, and added the desired special character to the 'favourite' list, but after that I do not know how to move ahead. Would like help.
Thanks to all.
Dr. Somanna

Thank you for your reply.
However I am afraid that neither double click nor drag/drop is adding the character to the text.
Is there any other method to get special characters into FCPX?

How does one enter special characters, in particular french accents into text in PS Elements?

I'm trying to produce some artwork in Photoshop Elements with some French text in it, so I need to know how to input special characters for the letters with accents. Anyone got any ideas - I've tried looking for a glyph menu but that doesn't seem to exist on Elements.

Which operating system are you using and version of photoshop elements?
Photoshop elements doesn't have a Glyphs panel or menu.
Here's a way:
windows
http://symbolcodes.tlt.psu.edu/accents/codealt.html
mac
http://symbolcodes.tlt.psu.edu/accents/codemac.html

How export datas with special characters from SQL Developer?

Hi.
I'm doing an import of datas of a table, but this table have special characteres in specific accents (á,é,í,ó,ú), my source table have for example "QRCN Querétaro, Candiles" but when I done an export from opcion Tool --> Export DLL (and Datas) from SQL Developer generate the next script
Insert into tablexxx(CADENA,NUMERO_FARMACIA,SUCURSAL_REFERENCIA) values ('C002','20280','QRCN Quer?ro, Candiles');
How can I do for export my datas and generate the script correct?
Insert into tablexxx(CADENA,NUMERO_FARMACIA,SUCURSAL_REFERENCIA) values ('C002','20280','QRCN Querétaro, Candiles');
thanks.

Hi sybrand_b,
1. In my SQL Developer I select Tool-->Export DDL (and Data).
2. I Select name file, connection (this is a remote DB), objects to export in this case I select 'Tables and data' and table name to export
3. Run the procedure and generate the script following:
-- File created - jueves-julio-01-2010
-- DDL for Table TABLEXXX
CREATE TABLE "BOLINF"."TABLEXXX"
(     "CADENA" VARCHAR2(50 BYTE),
     "NUMERO_FARMACIA" VARCHAR2(50 BYTE),
     "SUCURSAL_REFERENCIA" VARCHAR2(200 BYTE)
-- DATA FOR TABLE TABLEXXX
-- FILTER = none used
REM INSERTING into TABLEXXX
Insert into TABLEXXX (CADENA,NUMERO_FARMACIA,SUCURSAL_REFERENCIA) values ('C002','20280','QRCN Quer?ro, Candiles');
Insert into TABLEXXX (CADENA,NUMERO_FARMACIA,SUCURSAL_REFERENCIA) values ('C002','20281','QRCG Quer?ro, Corregidora');
Insert into TABLEXXX (CADENA,NUMERO_FARMACIA,SUCURSAL_REFERENCIA) values ('C002','20282','QRFU');
Insert into TABLEXXX (CADENA,NUMERO_FARMACIA,SUCURSAL_REFERENCIA) values ('C002','20283','QRFU');
Insert into TABLEXXX (CADENA,NUMERO_FARMACIA,SUCURSAL_REFERENCIA) values ('C002','20284','SAUN San Lu?P, Universidad');
Insert into TABLEXXX (CADENA,NUMERO_FARMACIA,SUCURSAL_REFERENCIA) values ('C002','20285','SAEV San Lu?P, Eje Vial');
Insert into TABLEXXX (CADENA,NUMERO_FARMACIA,SUCURSAL_REFERENCIA) values ('C002','20286','SALB San Lu?P, Los Bravo');
Insert into TABLEXXX (CADENA,NUMERO_FARMACIA,SUCURSAL_REFERENCIA) values ('C002','20287','SAAL San Lu?P, Alvaro Obreg?');
Insert into TABLEXXX (CADENA,NUMERO_FARMACIA,SUCURSAL_REFERENCIA) values ('C002','20288','SACA San Lu? Callej?n de Cod');
4. But my source table have the next datas.
Select * from TABLEXXX.
CADENA     NUMERO_FARMACIA     SUCURSAL_REFERENCIA
C002     20280     QRCN Querétaro, Candiles
C002     20281     QRCG Querétaro, Corregidora
C002     20282     QRFU
C002     20283     QRFU
C002     20284     SAUN San Luís P, Universidad
C002     20285     SAEV San Luís P, Eje Vial
C002     20286     SALB San Luís P, Los Bravo
C002     20287     SAAL San Luís P, Alvaro Obregó
C002     20288     SACA San Luís, Callejón de Cod
5. I have done a query to table nls_database_parameters.
NLS_LANGUAGE     AMERICAN
NLS_TERRITORY     AMERICA
NLS_CURRENCY     $
NLS_ISO_CURRENCY     AMERICA
NLS_NUMERIC_CHARACTERS     .,
NLS_CHARACTERSET     UTF8
NLS_CALENDAR     GREGORIAN
NLS_DATE_FORMAT     DD-MON-RR
NLS_DATE_LANGUAGE     AMERICAN
NLS_SORT     BINARY
NLS_TIME_FORMAT     HH.MI.SSXFF AM
NLS_TIMESTAMP_FORMAT     DD-MON-RR HH.MI.SSXFF AM
NLS_TIME_TZ_FORMAT     HH.MI.SSXFF AM TZH:TZM
NLS_TIMESTAMP_TZ_FORMAT     DD-MON-RR HH.MI.SSXFF AM TZH:TZM
NLS_DUAL_CURRENCY     $
NLS_COMP     BINARY
NLS_NCHAR_CHARACTERSET     AL16UTF16
NLS_LENGTH_SEMANTICS     BYTE
NLS_NCHAR_CONV_EXCP     FALSE
NLS_RDBMS_VERSION     10.2.0.4.0
6. I have revised in Regedit-->HKEY_LOCAL_MACHINE-->SOFTWARE-->ORACLE-->ORACLE HOME and value for NLS_LANG=AMERICAN_AMERICA.UTF8
where should I change for export my datas correct?
or exist any form for export my datas?
thanks a lot.
regards

How to replace XML special characters using Xpress e.g. ' = '

Hellos
I need to write some XML built from resource data.
The resource data strings can contain anything e.g. & ' " < and > characters.
How do I replace these characters with the strings & ' " etc.... from within Xpress?
I try something like:-
<set name='testchar'>
<switch>
<ref>thisLetter</ref>
<case>
<s>'</s>
<s>'</s>
</case>
<case>
<s>"</s>
<s>"</s>
</case>
<case default='true'>
<ref>thisLetter</ref>
</case>
</switch>
</set>
But when saved the <s>'</s> gets saved as <s>'</s>
Is this impossible with Xpress forcing me to invoke my own Java class? (which is a pain to do because of internal politics re restarting of App Server).

Hmmmm seems there is transformation in this set up too.
What I am trying to do is to parse a string which may or may not contain XML special characters into an XML acceptable string.
e.g. transform the surname O'Connor into O&apos ;Connor (with no embedded blank)
I wish to write a rule which uses XPress language to achieve this.
I want to convert the character ' into the string &apos ; (with no blank between apos and ;) and similar for the other XML specials.
Is this possible?

How to find the 'special characters' window

Hi,
Frequently I want to access the 'special characters' window, but when I click on the 'special characters' menu item the window does not appear. Sometimes I later find it on another screen (I use nine screens in Spaces), and sometimes can I see it on another screen using Expose, but when I go there it has disappeared. It seems a very fugitive tool, and in its way displays some cute, personality........ But I would love to know how to find it or to force it to appear on the same screen as the application from which I tried to open it!
all the best,
Jeremy Harbinson

Hi,
Thanks for the reply.
I tried what you suggest - in the International section of the System Preferences there is a tab labelled 'input menu' and there is a check box (which is checked) titled 'Show input menu in Menu bar'. Unchecking that removes a national flag from the the menu bar, checking it restores that flag. So far, so good. If a click on the flag, a drop down menu appears with 'Hide character palette' as an item - clicking this changes it state to 'Show character palette' but clicking this (several times) changes nothing else that I can see,
all the best,
Jeremy

How do I add special characters from my favorites to text?

I have the new version of Numbers 3.5. In previous versions if I wanted to add foreign language symbols to the text, I only had to click my mouse from the "special characters" and it was added to the word I was typing. Today I am not able to use my Spanish vocabulary because I cannot add the necessary symbols. How do I use this feature in my document text?

Input from the Character Viewer normally requires double-clicking or drag/drop.
The special characters needed for spanish are also available by just holding down the key for the base letter. If you hold down the n key, you should get a popup menu where you can choose ñ.
There are also option key shortcuts for such letters. Option n then n will give you ñ.

How to type diactrics (special characters)

Similar Messages

Maybe you are looking for