How to type number powers in Muse?
I have to type this: 10−9
(ten to the power of minus 9)
but I can't find any formatting options to do so.
Any help please?
Hello,
Please take a look at this related post: http://forums.adobe.com/message/5708675#5708675
Cheers
Parikshit
Similar Messages
-
How to type Number in table?
it sounds stupid. but I really do not know.
when I type number like 89 in one cell of the table, it will change to the currency.
for example, "89" is automatically changed to "£89.00"
how to avoid this effect?pangeng,
Not stupid at all. Select the table, then click on the Table inspector > Format. Click on the Cell Format menu and select Number. Change the Decimal number to zero.
-Dennis -
How do i add type kit fonts to muse web site
how do I +add type kit fonts to muse website
Hi.
Check this video, might be helpful
Let me know if you have any questions -
How to change number range for document type ?
Dear All
Experts
How to change the number range for document types for entry view? I am trying to change the number range for all document type as per defined ranges in FBN1, but at the time of saving document type and number range the system is throwing error message as
Doc. type C1: Number range 07 is used for ledger L6 with doc. type AE
Message no. FAGL_LEDGER_CUST093
I have defined a leading ledger in system too with these settings
1) Define ledger for accounting.
2) Defining currencies for it.
3) Defining ledger group for the same.
4) Defining accounting principles
5) Assignment of principles to leading ledger.
Are there any extra settings required for leading ledger settings?
I have some doubts those are :-
How document types defined at ledger level?
How to define them at leading ledger level? (Like my case)
Focus on this will be appreciable.
Regards,
Sharvari Joshi.hi ,
The document numbers in the leading ledger and the non leading ledgers should be in sync, they should not have any differences, so incase you are trying to change the number range for C1, the number range 07 is already been assigned to doc type AE. i guess you have cant use 07 for C1. may be you can try out with an other number range. check this and let me know if you are able to do this.
coming to
1.How document types defined at ledger level?
2.How to define them at leading ledger level? (Like my case)
Ans 1. please try defining document types for entry view in a ledger.
path : SPRO- financial accounting new -financial accounting global settings new - document -document types -define document types for entry view in ledger.
upon prompt enter the ledger and go ahead creating the number ranges for the document types.
Hope this helps.
Regards
amrutha -
How to retrive value from column of type number
Hi,
I have a site column 'Sample' which is of type Number. Number of decimal places for the column is specified as 0.
Consider the Sample column has a value '2'.
When I retrieve the properties for Sample column, the value is displayed as 2.0000000
I am retrieving the listitem properties using SPListItem.Properties in ItemCheckedin event.
How to get value without the decimal places?
Thanks in advance,
dhijitHi.
You can cast this value as int.
int myVal = (int)myItem["myField"];
if cast crashes, try to use int.TryParse or Convert.ToInt32 Mehods
Regards,
Bubu
http://zsvipullo.blogspot.it
Please mark my answer if it helped you, I would greatly appreciate it. -
How to handle NUMBER data type of SQL
Hello All,
I have to call an Oracle store procedure developed by 3rd party, it has once of the input parameter as NUMBER.
Since NUMBER SQL data type is not support by PI 7.0 (http://help.sap.com/saphelp_nwpi71/helpdata/EN/44/7b72b2fde93673e10000000a114a6b/content.htm),
when I am execute this scenario, it through an error for - Unsupported parameter type 'NUMBER'.
I cannot change the store procedure or any thing in Oracle.
I gone through some thread but did not find any help. NUMBER type for Oracle SP
Please let me know if there any work around.
Thanks in Advance.
PradeepThanks for your reply.
I cannot customize the stored procedure parameter to NUMERIC, as this is standard SP is from a product.
Below is the final XML generated with error on PALC and PREL parameter for NUMBER, ideally it should be
<PALC isInput="true" type="NUMBER"/>
<PREL isInput="true" type="NUMBER"/>
<Statement xmlns="">
<LSA_REL_DM action="EXECUTE">
<table>ACQDR.lsa_rel_dm</table>
<PPROJECTID isInput="true" type="VARCHAR">85LJ24210</PPROJECTID>
<PDMC isInput="true" type="VARCHAR">LJ200-A-J00-00-00-00-00AAA-00K-AA</PDMC>
<PLCN isInput="true" type="VARCHAR"/>
<PALC isInput="true"/>
<PTYPE isInput="true" type="CHAR"/>
<PSOURCE_CODE isInput="true" type="VARCHAR"/>
<PREL isInput="true"/>
<PRFU isInput="true" type="VARCHAR"/>
<POBJECT isInput="true" type="BLOB"><dmodule xsi:noNamespaceSchemaLocation="C:/Projects/S1000D/Document/schema/TIR_Parts_Vendors.xsd" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"><identAndStatusSection><dmAddress><dmIdent><dmCode modelIdentCode="LJ200" systemDiffCode="A" systemCode="J00" subSystemCode="00" subSubSystemCode="00" assyCode="00" disassyCode="00" disassyCodeVariant="AAA" infoCode="00K" infoCodeVariant="A" itemLocationCode="A"/><language languageIsoCode="US" countryIsoCode="sx"/><issueInfo issueNumber="0" inWork="1"/></dmIdent><dmAddressItems><issueDate year="20111107" month="20111107" day="20111107"/><dmTitle><techName>General</techName><infoName>Organizations technical information repository</infoName></dmTitle></dmAddressItems></dmAddress><dmStatus><security securityClassification="01"/><responsiblePartnerCompany enterpriseCode="24210"><enterpriseName>Learjet</enterpriseName></responsiblePartnerCompany><originator enterpriseCode="24210"><enterpriseName>Learjet</enterpriseName></originator><applicCrossRefTableRef><dmRef><dmRefIdent><dmCode modelIdentCode="LJ200" systemDiffCode="A" systemCode="J00" subSystemCode="0" subSubSystemCode="0" assyCode="00" disassyCode="00" disassyCodeVariant="A" infoCode="00W" infoCodeVariant="A" itemLocationCode="A"/></dmRefIdent></dmRef></applicCrossRefTableRef><brexDmRef><dmRef><dmRefIdent><dmCode modelIdentCode="LJ200" systemDiffCode="A" systemCode="J00" subSystemCode="0" subSubSystemCode="0" assyCode="00" disassyCode="00" disassyCodeVariant="A" infoCode="022" infoCodeVariant="B" itemLocationCode="D"/></dmRefIdent></dmRef></brexDmRef></dmStatus></identAndStatusSection><content><techRepository><partRepository/></techRepository></content></dmodule></POBJECT>
<PSTATUS isInput="true" type="CHAR">D</PSTATUS>
<PISSTYPE isInput="true" type="CHAR"/>
<POBJECT_CLASS isInput="true" type="VARCHAR">XML</POBJECT_CLASS>
</LSA_REL_DM>
</Statement>
Thanks in Advance -
How to get Document type , number , part and version from mm01
Hi ,
Can you help me out so that i can able to get the document type , number , part ,version from mm01. Iam using exit EXIT_SAPLMGMU_001 but i was not able to get those details inside the parameters . I not able to get any values inside wmara parameter. ?
Regards,
SivaganeshHello Siva,
Try with the below 2 BADI's
BADI_MM_MATNR
BADI_MATERIAL_CHECK
Regards,
TP -
How to change number format in a dynamic VO
Hi,
Dynamic VO :
Using "createViewObjectFromQueryStmt"
Dynamic UI :
<pre>
<af:table rows="#{bindings.DynamicVO.rangeSize}"
emptyText="No data to display."
var="row"
value="#{bindings.DynamicVO.collectionModel}"
id="t21"
rendered="#{pageFlowScope.ComponentDetailsBean.showContentTable}"
styleClass="AFStretchWidth">
<af:forEach items="#{bindings.DynamicVOIterator.attributeDefs}"
var="def">
<af:column headerText="#{def.name}" id="c21">
<af:outputText value="#{row[def.name]}"
id="ot41"/>
</af:column>
</af:forEach>
</af:table>
</pre>
Issue :
If there are any columns of type number are there , they are by default displayed in currency format. Can we change them. For (static) VOs , we can set column format in attributes. How to go about dynamic VOs.
Actually, it would be helpful, if some one can say, where its getting format from.
Appreciate your help.
Thanks
VenkateshHi.
This is Business Planning forum ...
Try to post your question to Logistic forums ...
Regards. -
How to find number of lines in an internal table
Dear all,
how to find number of records present in an internal table.DESCRIBE TABLE
Syntax
DESCRIBE TABLE itab [KIND knd] [LINES lin] [OCCURS n].
Extras:
1. ... KIND knd
2. ... LINES lin
3. ... OCCURS n
Effect
This statement determines some properties of the internal table itab and assigns them to the specified variables. The various additions enable you to determine the table type, the number of currently filled rows and the initial memory requirement.
In addition, the system fields sy-tfill and sy-tleng are filled with the current number of table rows and the length of a table row in bytes.
Notes
For detailed information about an internal table, you should use the methods of RTTS of the DESCRIBE TABLE statement.
Without the specification of an addition, the statement DESCRIBE TABLE only sets the system fields sy-tfill and sy-tleng.
Addition 1
... KIND knd
Effect
The table type of the internal table itab is determined and a corresponding one-digit identification is assigned to the data object knd. A character-type data type is expected for the data object. The identifications are "T" for standard tables, "S" for sorted tables and "H" for hashed tables. These values are also defined as constants sydes_kind-standard, sydes_kind-sorted, and sydes_kind-hashed in the type group SYDES.
Addition 2
... LINES lin
Effect
The current number of table rows of the internal table itab is determined and is assigned to the data object lin.The data type i is expected for the data object.
Note
As of release 6.10, the current number of rows of an internal table can also be determined using the in-built function lines.
Addition 3
... OCCURS n
Effect
The initial memory requirement defined during the creation of the internal table with the addition INITIAL SIZE or the obsolete addition OCCURS is determined and assigned to the data object n. The data type i is expected for the data object.
Example
Descending sorting of a generically typed internal table in a subprogram. Since sorted tables cannot be sorted in a descending order, the table type is checked to avoid an exception that cannot be handled.
TYPE-POOLS sydes.
FORM sort_descending CHANGING itab TYPE ANY TABLE.
DATA tabkind(1) TYPE c.
DESCRIBE TABLE itab KIND tabkind.
IF tabkind = sydes_kind-standard OR
tabkind = sydes_kind-hashed.
SORT itab DESCENDING.
ELSEIF tabkind = sydes_kind-sorted.
MESSAGE '...' TYPE 'E'.
ELSE.
MESSAGE '...' TYPE 'E'.
ENDIF.
ENDFORM.
DESCRIBE FIELD INTO
Note
This statement is for internal use only.
It cannot be used in application programs.
Syntax
DESCRIBE FIELD dobj INTO td.
Effect
All characteristics of the field f, its components , sub-components etc. are displayed in the field td (type description). td has to be of the type SYDES_DESC, defined in Type Group SYDES. Because of this, the type group SYDES must be integrated into the ABAP-program with a TYPE-POOLS statement .
The structure SYDES_DESC has two table-type components TYPES and NAMES:
In TYPES, the tree structure of the type belonging to f is displayed. The components of a node are stored in the table TYPES in a continuous manner. Beginning and end of the line area that represents the components are stored in TYPES-FROM and TYPES-TO. The reference to the superior node can be found in TYPES-BACK. If no superior resp. subordinate node exists, then this is marked by the value 0 (For the relevance of further components, refer to the following sections).
The names of components, types etc. are not stored directly in TYPES. Instead, the components TYPES-IDX_... hold an index in the name table NAMES. The value 0 indicates that there is no reference to the name table.
NAMES contains the possibly fragmented names in the component NAMES-NAME. If a name continues in the following line, this is indicated by an asterisk ('*') in the component NAMES-CONTINUE.
The type description table (TYPES) not only stores information about the tree structure but also further information about the type of f resp. its components. This includes especially all information that can be determined using the usual additions to DESCRIBE FIELD. In detail, TYPES contains the following columns:
IDX_NAME
Component Name
IDX_USER_TYPE
Name of a user-defined type, i.e., a type that was defined through its TYPES-statement. Derived types (... TYPE A-B) and structures from the ABAP-Dictionary are not considered to be user-defined types.
CONTEXT
For user-defined types only: The context, in which the type is defined. Possible values are defined in the constant SYDES_CONTEXT of the type group SYDES. Please only use these constants to carry out a comparison. In detail, we distinguish between the following type contexts:
SYDES_CONTEXT-PROGRAM: Program-global type
SYDES_CONTEXT-FORM : FORM-local type
SYDES_CONTEXT-FUNCTION: FUNCTION-local type
SYDES_CONTEXT-METHOD : METHOD-local type
IDX_CONTEXT_NAME
For user-defined types only:
With a local context: The name of the FORM or FUNCTION, whose type was defined. The name of the associated program is then the first entry in the name table.
With a global context: The name of the program in which the type was defined.
IDX_EDIT_MASK
Conversion routine from the ABAP-Dictionary, is in accordance with the addition EDIT MASK at simple DESCRIBE.
IDX_HELP_ID
Help-Id when referencing to fields from the ABAP-Dictionary
LENGTH
Internal length, corresponds to the addition LENGTH at simple DESCRIBE
OUTPUT_LENGTH
Output length, corresponds to the addition OUTPUT-LENGTH at simple DESCRIBE
DECIMALS
Number of decimal digits, corresponds to the addition DECIMALS at simple DESCRIBE
TYPE
ABAP-Type, corresponds to the addition TYPE at simple DESCRIBE
TABLE_KIND
A table type is stored here for the components which represent an internal table. The same values are returned as with the variant DESCRIBE TABLE itab KIND k. Components which do not represent a table get the return value set to SYDES_KIND-UNDEFINED (see type group SYDES).
Example
Example definition of the complex data type EMPLOYEE_STRUC:
PROGRAM DESCTEST.
TYPES: BEGIN OF name_struc,
first TYPE c LENGTH 20,
last TYPE c LENGTH 20,
END OF name_struc,
BEGIN OF absence_time_struc,
day TYPE d,
from TYPE t,
to TYPE t,
END OF absence_time_struc,
phone_number TYPE n LENGTH 20,
BEGIN OF employee_struc,
id LIKE sbook-customid,
name TYPE name_struc,
BEGIN OF address,
street TYPE c LENGTH 30,
zipcode TYPE n LENGTH 4,
place TYPE c LENGTH 30,
END OF address,
salary_per_month TYPE p LENGTH 10 DECIMALS 3,
absent TYPE STANDARD TABLE OF absence_time_struc
WITH NON-UNIQUE DEFAULT KEY,
phone TYPE STANDARD TABLE OF phone_number
WITH NON-UNIQUE DEFAULT KEY,
END OF employee_struc.
You can determine the structure of the type EMPLOYEE_STRUC by collecting the type group SYDES as follows:
TYPE-POOLS: sydes.
DATA: employee TYPE employee_struc,
td TYPE sydes_desc.
DESCRIBE FIELD employee INTO td.
The following table shows a few selected columns of the type description table TD-TYPES. For a better overview, the names of the columns IDX_NAME, IDX_UERR_TYPE and IDX_EDIT_MASK have been shortened:
|FROM| TO |BACK|NAME|UTYP|EMSK|TYPE
|--||||||--
1 | 2 | 7 | 0 | 0 | 2 | 0 | v
2 | 0 | 0 | 1 | 6 | 0 | 4 | N
3 | 8 | 9 | 1 | 7 | 5 | 0 | u
4 | 10 | 12 | 1 | 8 | 0 | 0 | u
5 | 0 | 0 | 1 | 9 | 0 | 0 | P
6 | 13 | 13 | 1 | 11 | 0 | 0 | h
7 | 17 | 17 | 1 | 12 | 0 | 0 | h
8 | 0 | 0 | 3 | 13 | 0 | 0 | C
9 | 0 | 0 | 3 | 14 | 0 | 0 | C
10 | 0 | 0 | 4 | 15 | 0 | 0 | C
11 | 0 | 0 | 4 | 16 | 0 | 0 | N
12 | 0 | 0 | 4 | 17 | 0 | 0 | C
13 | 14 | 16 | 6 | 0 | 18 | 0 | u
14 | 0 | 0 | 13 | 20 | 0 | 0 | D
15 | 0 | 0 | 13 | 21 | 0 | 0 | T
16 | 0 | 0 | 13 | 22 | 0 | 0 | T
17 | 0 | 0 | 7 | 0 | 0 | 0 | N
Please note that the entries in rows 6 and 7 represent internal tables (ABAP-Type h). There is always an entry for the corresponding row type (rows 13 and 17) to an internal table.
The indices in the rows 5 to 7 refer to entries in the name table TD-NAMES. If you look, e.g., at row 3, you find the corresponding component name in TD-NAMES from row 7 (NAME) onward and the corresponding user type from row 5 (NAME_STRUC) onward.
In the name table TD-NAMES you find the following entries. Note that the names SALARY_PER_MONTH and ABSENCE_TIME_STRUC are stored in two parts:
|CONTINUE|NAME |CONTINUE|NAME
|--| -||--
1 | |DESCTEST 12 | |PHONE
2 | |EMPLOYEE_STRUC 13 | |FIRST
3 | |SBOOK-CUSTOMID 14 | |LAST
4 | |==ALPHA 15 | |STREET
5 | |NAME_STRUC 16 | |ZIPCODE
6 | |ID 17 | |PLACE
7 | |NAME 18 | * |ABSENCE_TIME_ST
8 | |ADDRESS 19 | |RUC
9 | * |SALARY_PER_MONT 20 | |DAY
10 | |H 21 | |FROM
11 | |ABSENT 22 | |TO -
How to get number of digits in given amount
Hi Experts,
How to get number of digits in given amount.
Regards
MohitCheck this :
data: v_data1 type p decimals 3 value '12.860',
v_char1 type char20,
v_char2 type char20,
v_char3 type char20,
len type i.
write v_data1 to v_char1.
split v_char1 at '.' into v_char2 v_char3.
len = strlen( v_char3 ).
write:/ v_char2,
/ v_char3, " this holds the digit value
/ len. " number digits -
How to restrict number of concurrent connections etc.
Hi,
I'm able to use wi-fi thru WRT54GC.
I want to know:
1. How to restrict number of users connecting to the wireless network that is setup thru my router?
2. I also want to know about any monitoring software which can tell me about connected PCs, user names, bandwidth available, bandwidth utilized etc.
Thanks in advance
Rajeev1. logon to router's setup page, open I.E. and in the address bar type 192.168.1.1, it would ask for username and password, put "admin" default password without any username... click on the wireless tab >> wireless security >> try setting up wireless security as per the requirements, also you can setup wireless MAC filter and you can setup MAC address of wireless computers which you want to allow to coonect to the network...
2. not quiet sure about monitoring software which would show you detail log about bandwidth, bandwidth utilized by each computer...however you should view router's logs from linksys "logviewer" utility...go to ftp.linksys.com/pub/network and download the "logviewer" utility.
let me know if you have any issues. -
How to transport number range group Configuration in Material Master
Hi,
I have this query regarding how to transport number range group in material master from one server to another.
Problem: There was no number range assignment done for a particular material type. So, i assigned the particular mat. type to a group which had some number range intervals with the help of T-Code MMNR.
But when i want to transport this config. to other sever, it is only transporting the interval but not the assignment done to that group. In the menu bar only Interval transport option is there.
Can anybody help me with this I hope the query is clear.
Regards
VivekHi,
Number range objects can be transported using Workbench requests.
Thanks
Kishore -
How to calculate number of sundays and saturdays between two Dates
friends i want to calculate how many Sundays come in two Dates
i have tried following code which is hard coded i have to impliment method which can give me number of Sundays between two Dates
please help me
import java.util.Date;
import java.text.DateFormat;
import java.text.SimpleDateFormat;
import java.util.Calendar ;
import java.util.GregorianCalendar;
public class DateDiffCalculator {
private static final SimpleDateFormat SDF = new SimpleDateFormat("yyyy-MMM-dd");
public DateDiffCalculator() {
public static Date getDate (String date) throws Exception {
//log.debug(" "+date);
return SDF.parse(date);
public static Date getDate (Date date) throws Exception {
// log.debug("date is "+date);
return getDate(SDF.format(date));
public static long getDiffInDays(Date d1,Date d2) {
boolean isdiffGreaterThanYear=false;
long diffInMilliSeconds=d1.getTime()-d2.getTime();
return diffInMilliSeconds/(1000*60*60*24);
public static int getYear(String date) {
//String[] day= {Sun,Mon,Tue,Wed,Thu,Fri,Sat};
Integer year=new Integer(date.substring(0,4));
return year.intValue();
public static int getMonth(String date) {
//String date.substring(5,7);
System.out.println(" "+date.substring(5,8));
String m= date.substring(5,8);
int month=0;
if(m.equalsIgnoreCase("Jan")) {
month=1;
if(m.equalsIgnoreCase("Feb")) {
month=2;
if(m.equalsIgnoreCase("Mar")) {
month=3;
if(m.equalsIgnoreCase("Apr")) {
month=4;
if(m.equalsIgnoreCase("May")) {
month=5;
if(m.equalsIgnoreCase("Jun")) {
month=6;
if(m.equalsIgnoreCase("Jul")) {
month=7;
if(m.equalsIgnoreCase("Aug")) {
month=8;
if(m.equalsIgnoreCase("Sep")) {
month=9;
if(m.equalsIgnoreCase("Oct")) {
month=10;
if(m.equalsIgnoreCase("Nov")) {
month=11;
if(m.equalsIgnoreCase("Dec")) {
month=12;
return month;
public static int getDay(String date) {
Integer day=new Integer(date.substring(9,11));
return day.intValue();
public static int getNumberofSundays(String d1,String d2) throws Exception {
//d1 is leave start date d2 is leave end date
// get object in Date form
Date date1=getDate(d1);
Date date2=getDate(d2);
// now get calender objects from it
GregorianCalendar c1= new GregorianCalendar(getYear(d1),getMonth(d1),getDay(d1));
GregorianCalendar c2= new GregorianCalendar(getYear(d2),getMonth(d2),getDay(d2));
// get period
long leavePeriod = getDiffInDays(date1,date2);
return 12; // it should return number of sundays but we type 12 to perform compilation
public static void main(String[] arg)throws Exception {
System.out.println(" "+getNumberofSundays("2005-Oct-07","2006-Mar-01"));
}thanks now i have modified the get Month Code
as follows
public static int getMonth(String date) {
//String date.substring(5,7);
System.out.println(" "+date.substring(5,8));
String m= date.substring(5,8);
int month=0;
if(m.equalsIgnoreCase("Jan")) {
month=0;
if(m.equalsIgnoreCase("Feb")) {
month=1;
if(m.equalsIgnoreCase("Mar")) {
month=2;
if(m.equalsIgnoreCase("Apr")) {
month=3;
if(m.equalsIgnoreCase("May")) {
month=4;
if(m.equalsIgnoreCase("Jun")) {
month=5;
if(m.equalsIgnoreCase("Jul")) {
month=6;
if(m.equalsIgnoreCase("Aug")) {
month=7;
if(m.equalsIgnoreCase("Sep")) {
month=8;
if(m.equalsIgnoreCase("Oct")) {
month=9;
if(m.equalsIgnoreCase("Nov")) {
month=10;
if(m.equalsIgnoreCase("Dec")) {
month=11;
return month;
but question remains same how to calculate number of Sundays Between 2 Dates -
How many types i can import as file in FLA and what's the differences ??
Hello
How many types i can import as file in FLA and what's the differences ??you wouldn't import a .as file.
you could open it in the flash ide (or any text editor) and edit it.
you could create a fla and assign a document class which flash will compile into your swf.
you could create a library object in a fla, tick export for actionscript and assign a class that flash will compile that class into your swf.
you could instantiate a class object (using the "new" constructor) in a flash movieclip timeline or in another class file and flash will compile that class into your swf.
for Workers to extend a class use something like:
package
import Citizens;
public class Workers extends Citizens
protected var baseSalary:Number = 1000;
public function Workers()
super();
public function receivePayment():Number
return this.baseSalary; -
Question: How to assign number ranges to the Official Excise Document Numbe
Question: How to assign number ranges to the Official Excise Document Number
Field name is: EXNUM, table name: J_1IEXCHDR
SAP CIN
Dear expert,
I will briefly explain the scenario:
I have created return po.
Process MIGO w.r.t. return PO- Material document generated.
Process: J1IS - excise invoice other movement create.
--> Now I want to print the document --> I m trying with T-code J1IP --> entered all the required data --. Used out put type - J1I0
But I am not getting the list of document for printing and even print is not coming.
There is no print document getting for a printing.
When I checked in an above said table (mentioned in question), I found that for transaction type OTHR, there is no number ranges defined for official document no.
And because of this reason I m not getting any document in the print.
Can you Pl extend Ur help and Pl suggest me where (path or transaction) the number ranges can be maintained for the official excise document No.
Thanking you all n advance and expecting your earliest response.
Regards
omDear Friend,
J_1IEXCHDR this table stores the all the excise documents created while excise transactions are done ,
for that Goto j1i9 or SNRO in these transaction you maintiane the number ranges for the
J_1IPLA2 PLA part II number range object
J_1IRG1 RG1 Number range object
J_1IRG1_T No. Range for RG1 - Excise group / Material
J_1IRG23A1 RG23A part 1 no. range object
J_1IRG23A2 RG23A part II number range object
J_1IRG23C1 RG23C part I number range object
J_1IRG23C2 RG23C part II number range object
J_1IRG23D Folio Numbers for RG 23D
like these lot of objects are there for them u maintiane the no. ranges
Regards
Pramod
Maybe you are looking for
-
How to find R/3 fields to BI InfoObjetcs .
Hi, I have R/3 fields , but now i want to find corresponding BI Infoobjects , Pls let me know how to find it. I have tried RSOSFIELDMAP, 90% Infoobjects are not available i nBI. Note : I have Created generic datasource and now i want to store the dat
-
Label becomes nil when coming from UIView in UIViewController
Hi, I'm trying to call a method in UIViewController from UIView to change the UILabel in UIViewController by passing a NSString argument from UIView. But it doesn't the UILabel becoz the UILabel becomes nil in UIViewController. But method is called p
-
Financial Reporting GetCell Function
Hi All, I am trying to fetch the value of one cell into another cell using the GetCell function: GetCell("grid1",1,A,current) But that gives a syntax error: Error in formula: GetCell("grid1",1,A,current) At position 1 Unrecognized character(s): 'getc
-
I am using OWB 10g R2. I want to have a Process Flow (which will eventually run in Oracle Workflow) run a mapping which does a straightforward ETL process from a source table to a target table. If that mapping completes successfully I want to run a s
-
Where is the document.write calling file?
I an new on the job and still finding my way around the files. I need to edit an html file. I find the file, (or, what I think is the file) but it is a document.write calling another page. I can't find the actual page of code to edit. It is a simple