How to type the apple symbol on my keyboard?

i wonder what's the key combination to get the little apple character on my keyboard any help??

See thread:
http://discussions.apple.com/thread.jspa?threadID=1338971&stqc=true
For what I hope are easy points.
Thanks ... Ken

Similar Messages

  • How to type the rupee symbol in hp pavilion g4?

    My HP Pavilion notebook's model is G4, TX series 1202. the key board shows the rupee symbol (bottom right) on the same key as the $ and 4. but i am unable to figure out how to type!
    any pointers?

    Hi,
    I think you need font too. Here is another suggestion:
       http://www.quickonlinetips.com/archives/2011/07/type-indian-rupee-symbol-with-keyboard-key/
    Regards,
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • In Mail 7.3 on my Retina MacBook Pro on OS 10.9.4, how can I type from the keyboard into a mail message using the Apple Symbols font?

    In Mail 7.3 on my Retina MacBook Pro on OS 10.9.4, how can I type from the keyboard into a mail message using the Apple Symbols font?
    When I select the Apple Symbols font from the list accessed from under Format/"Show fonts"/collection-all fonts/Apple Symbol, and then continue typing, I get normal letters, if in a slightly different font.
    How can I type using the Apple Symbol font?  I want to use that font to include keyboard and cursor selections of actual screen symbols to help write easily understood explicit computer lesson emails to my 92 year-old mom from a few hundred miles away.
    Steve

    In Mail 7.3 on my Retina MacBook Pro on OS 10.9.4, how can I type from the keyboard into a mail message using the Apple Symbols font?
    When I select the Apple Symbols font from the list accessed from under Format/"Show fonts"/collection-all fonts/Apple Symbol, and then continue typing, I get normal letters, if in a slightly different font.
    How can I type using the Apple Symbol font?  I want to use that font to include keyboard and cursor selections of actual screen symbols to help write easily understood explicit computer lesson emails to my 92 year-old mom from a few hundred miles away.
    Steve

  • My iPhone 4 will not turn on and is just displaying the itunes symbol not the apple symbol. How do I fix it?

    My iPhone 4 will not turn on and is just displaying the itunes symbol not the apple symbol. How do I fix it? My phone died and I went to plug it in and it just displayed the itunes logo. It will not turn on at all. I plugged it into my computer in an attempt to connect to itunes with hoped of it turning on, yet nothing popped up as if it wasn't registering. Please help!

    http://support.apple.com/kb/HT1808

  • I was in the middle of downloading an update and my I4 disconnected.  Now I can not reconnect to itunes.  My phone wont power down.  It just has the apple symbol with a bar underneath. How do I fix this.

    I was in the middle of downloading an update and my I4 disconnected. Now I can not reconnect or power down my phone.  It has the apple symbol and a bar underneath.  How can I fix this?

    Dear Terence, Thank you for responding to my problem. In no way did I mean to discredit the dedication and work of the volunteers assisting Apple customers and if I did, I apologize. I am just so tired of having to purchase a new computer every other year as so it seems.  I know they are not perfected, but it is very frustrating when they just go kaput.  I am always the first person to appreciate a kind deed and do appreciate your support and help regarding this unfortunate issue. My iPad was the greatest computer I've had until this morning and was disappointed.  Again, thank you for your concern and for your help. It is greatly appreciated. 
    Sincerely,
    Shakabird1

  • How to type the symbol ^?

    How to type the symbol ^ on a MB Pro 13' AZERTY keyboard ? Thanks.

    It is really easy: the ^ is above the 6. But I assume you want to use it with a letter like ê : you do this by holding the Alt)option) key while clicking the 6 key, then let go and type the letter you want underneath it.
    I will give some others: alt+e then the letter, alt+u then the letter, etc.
    Another alternative: go to SystemPreferences/Keyboard, check the "show keyboard and character viewers in the menubar", they will stay in the menubar as a little flag. When clicking the flag-icon you can either choose the keyboard layout and see where the characters are or the character panel and there you can choose any character that you want: it will insert the character that you click on the spot where your mousepointer is. I made a short list of "favorites" everytime I used this panel.

  • How do i get  my i phone to show more than just the apple symbol?

    how do i get  my i phone to show more than just the apple symbol?

    Welcome to the Apple Community.
    AirPlay Mirroring requires a second-generation Apple TV or later, OS X 10.8 or better and is supported on the following Mac models: iMac (Mid 2011 or newer), Mac mini (Mid 2011 or newer), MacBook Air (Mid 2011 or newer), and MacBook Pro (Early 2011 or newer). It also requires the computer to be using wi-fi.

  • Lost the top line where the apple symbol is located. how do I get it back?

    I lost the top line (the one with the Apple symbol) and can not get it back.
    Thanks

    I assume you are in Fullscreen Mode.
    Hit the escape (ESC) key

  • Anyone know the History of the Apple symbol?

    I'm probaby posting in the wrong section, but does anyone know the history behind the apple symbol? How and why was an apple chosen?
    Thanks

    The original logo for Apple Computer Co. had the look of a wood-cutting or block-print or tattoo. It featured Sir Isaac Newton sitting under an apple tree. You can see that logo here:
    http://en.wikipedia.org/wiki/Image:Originalapplelogo.jpg (You'll have to type in the full link, sorry.)
    The apple with a bite taken out of it is a later development, and its symbolic meaning is probably easy enough to interpret for most people who've read Genesis.
    Incidentally, the original Apple I was priced at $666.66....
    Tuttle

  • I am having an MacBok Pro 13inch,having an Startup Problem, the time i press the power button after few seconds the apple symbol appears w/a loading sign below it

    i am having an MacBook Pro 13inch  , having an Startup Problem , the time i press the power button after few seconds the apple symbol appears with a loading sign below it and wont go further ahead of it . My data is all in the hard drive .. . I even tried the Internet recovery but no use !!!! but still no respons and the recovery and macintosh hd is now lock! but earlier only the recovery is lock and after both of them is lock.  i can reinstall,... and i didnt try to back up any data bec i dont know how? so please help me to resolve my prroblem.?

    luoie wrote:
    This thing happend,, it say Disk utility stopped repairing "Macintosh HD" disk utility can't repair this disk
    Sorry, possibly you need a new hard drive or try reformating. First
    you can try something like http://www.alsoft.com/diskwarrior/  it has been known to repair disk that DiskUtility could not. YMMV and they don't give it away.
    If Disk Warrior can not repair then you need to Reformate the drive. Make sure you have a back-up in place no matter what.
    http://www.apple.com/support/backup/
    Disk Utility will tell you something about it's SMART status:

  • My iPod 5th gen will not completely turn on it shows the apple symbol then shuts off I have restarted it and tried to plug it into my computer but cannot find it to restart it

    My iPod 5th gen will not completely turn on it shows the apple symbol then shuts off I have restarted it and tried to plug it into my computer but cannot find it to restart it
    Its been like this for awhile and I can not fix it

    Try:                                               
    - iOS: Not responding or does not turn on           
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try another cable                                                       
    - Try on another computer                                                       
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
      Apple Retail Store - Genius Bar

  • HELP! My cord failed during sync and now my phone is stuck on the Apple symbol with an empty bar underneath it and iTunes won't pick it up at all. I can't tur off my phone to reset and just letting it be dosen't seem to be workig either. What's wrong?

    My cord failed during sync to an update and now my phone is stuck on the apple symbol but there is a empty bar under it. I tried to turn off the phone but that didn't work and the iTunes onn my computer isn't picking up the device at all. Whats wrong? How do I fix it?

    My cord failed during sync to an update and now my phone is stuck on the apple symbol but there is a empty bar under it. I tried to turn off the phone but that didn't work and the iTunes onn my computer isn't picking up the device at all. Whats wrong? How do I fix it?

  • HT3964 I have a MacBook Pro that will not boot up. The apple symbol   Read more: I have a MacBook Pro that will not boot up. The apple symbol is there and a spinning wheel continues to spin. Any options??

    I have a MacBook Pro that will not boot up. The apple symbol is there and the spinning wheel keeps spinning. Any idea how I can fix this?

    Reinstall OS X.
    Reinstalling Lion/Mountain Lion Without Erasing the Drive
    Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
    Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
    When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu.
    Reinstall Lion/Mountain Lion: Select Reinstall Lion/Mountain Lion and click on the Continue button.
    Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.
    OR
    Reinstall Snow Leopard without erasing the drive
    Do the following:
    1. Repair the Hard Drive and Permissions
    Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
    If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
    2. Reinstall Snow Leopard
    If the drive is OK then quit DU and return to the installer.  Proceed with reinstalling OS X.  Note that the Snow Leopard installer will not erase your drive or disturb your files.  After installing a fresh copy of OS X the installer will move your Home folder, third-party applications, support items, and network preferences into the newly installed system.
    Download and install the Combo Updater for the version you prefer from support.apple.com/downloads/.

  • I attempted to upgrade the software on my iPad and I got a message that said it couldn't restore the iPad software due to an error. Now the iPad has a black scrren with the apple symbol and the processing symbol going around.

    I attempted to upgrade the software on my iPad 2 and I got a message that said "unable to restore Ipad due to error". Now the iPad had a black screen with the Apple symbol and the processing symbol going around and around. When I tried to re connect it to iTunes is says "cannot connect to this iPhone due to error". How do I reset the ipad?

    Please Get the iPad User Manual for iOS 5.

  • My i pod has loading thing under the apple symbol on screen what do i do it doesnt respond and restarting it doesnt help

    my i pod has loading thing under the apple symbol on screen what do i do it doesnt respond and restarting it doesnt help

    If not successful try the remaining items of
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar       

Maybe you are looking for

  • How do I export the workspace I set up in CS6 32 bit to the 64 bit version?

    I've grown to accept that workspaces can't be simply exported from a previous version of AI and imported into the next one. So I painstakingly set up my workspace in the 32 bit version of Illustrator CS6, all the panels laid up over 2 screens in the

  • Playing videos on itunes

    Everytime I try to add a video file to the i-tunes library nothing happens. In fact I always seem to have to use the "Add folder to library" option and the "Add file to library" option does not do anything. The video is in the correct format. So I'm

  • NWDI in E.P 7.0 Configuration Problem

    Hello Everyone, I have Selected 'DI' While Installing SAP and for Configuring NWDI I have run the DI Template in SAP Netweaver Adminstration. Imported the Configuration in NWDS in DevelopmentConfiguration Perspective. 1.While creating the Development

  • PJC set_custom_property gives unable to communicate with runtime process

    Hi I am modifying a PJC that extends VTextItem to act as a hyperlink I have registered a property in the PJC with the following code: public static final ID activeColor = ID.registerProperty("ACTIVE_COLOUR"); I then attempt to set the property from m

  • TS5376 What's wrong with iTunes that it won't install on my Win 7 laptop?

    I always get Error 7 on launch.  I've tried it over and over and it still won't work.  iTunes was working perfectly until the last iTunes update and then it imploded.  I've removed and reinstalled over and over,  following the instructions perfectly.