How to udate material master from contrat when there is a change in me32k

Planned delivery time is maintained in MRP 2 view of material master. Whenever contract is created for the material, the procurement team changes the planned delivery time in contract. This leads to inconsistency between the two values.
It is required that whenever planned delivery time for a material is changed in contract, the same value should get updated in MRP 2 view in material master.
Moderator message: "spec dumping", please work yourself first on your requirement.
Edited by: Thomas Zloch on Sep 7, 2011 11:00 AM

Try adding a trigger that will add records to a table that can be checked by the ODBC application whenever it runs. Of course, the trigger could also call a stored procedure that called some external code as well.
HTH

Similar Messages

  • How to replicate material master from R/3 to CRM

    Hi guys,
    I am trying to replicate material master from R/3 to CRM using BAPI_MATERIAL_SAVEDATA but no changes are getting replicated to CRM.
    Any help..??
    Thanks,
    Sid

    Hi find below for the product cat
    Steps to create the product category in SRM:
    1)       Create MM material groups in ECC client. This will create a transport. Go to SRM Tcode R3AS and select the object u201CDNL_CUST_PROD1u201D from the list and run it. You can monitor the job using R3AM1 in SRM. This will bring the material group into SRM. This can be seen in TCode u201CCOMM_HIERARCHYu201D in SRM.
    2)       Once it is done. Go to IMG in SRM and go to path SRM> SRM server> Cross app biz settings> Account aassigmnet> Define GL code for Acc *** Cat and Prod Cat. Maintain the GL code against this prod cat for all the account assignment codes. This is client specific setting and need to be done in every client by opening it. This GL code is given in the form in ticket.
    3)       Do a test and check if the product category is available for procurement in SC.
    Regards,
    Satish

  • Replicating of Material Master from ECC6.0 to SRM 5.0 in real-time

    Hi,
    I saw the URL on the steps to replicate Material Master from ECC to SRM:
    /people/marcin.gajewski/blog/2007/02/05/how-to-replicate-material-master-from-r3-to-srm
    It requires to run transaction r3as to load the material.
    Can I check do we have to do this step periodically to pull material master from ECC?
    Is there anyway to have a real-time RFC whenever the material is created or changed?
    Thanks!
    WEi

    Hi all,
    Thanks for the answers. Has anyone successfully sync the new material creation to SRM after initial load by configuring the delta?
    What is the exact function module / Bdoc / idoc that sync the material master to SRM?
    If we want to cusomize our own filter criteria like exlude certain material groups and include only material starting with certain numbers, how can we do that?
    Thanks!
    Regards,
    Wei

  • Uploading material master from R/3 to CRM problem

    Hi Experts,
    I am new to the Middleware
    I have downloaded the material master from R/3 to CRM but I am not able to see the downloaded products in CRM.
    I have checked the queue of R/3 there is no error.
    I even checked the queue of CRM there is no error.
    When I see in SMW01 the status is green and
    BDoc. Error message is showing “Mat. for Initial Download: Function table not supported”
    Can anybody give me suggestions?
    I will reward the points

    i have checked the filters
    i have down the following settings
    Request Name     MATERIAL
    Table Name       MARA
    Field Name       MATNR
    Incl/Excl      Inclusive defined set/array
    Option           Greater or equal then (>=Low)
    Low              a1(r/3 material no.)
    even thin i did not get the result
    i have the same error that is
    "Mat. for Initial Download: Function table not supported"
    help me out it is very urgent

  • How to set 'Material Master' tab as default in standard transaction CG54?

    Hi All
    I am having a requirement to call the transaction CG54 from a custom program. On calling the transaction, I need to put some default values to the input fields and the default tab selected should be 'Material Master'. I am able to default input fields using BDC Transaction call. Can anybody guide me how to set Material Master tab as the default tab selected?
    Thanks in advance
    Rinzy Deena Mathews

    Hi All
    Solved the issue by myself.
    Initialization of tab in transaction CG54 is based on the values in the standard table TCGSGP - EHS: Search parameter (reproduction from SET/GET memory).
    Calling of the transaction CG54, with default values and parameters can be done with the help of following standard function module:
    *-- Types
      TYPES : BEGIN OF t_obj_tab.
              INCLUDE STRUCTURE rcgapplobj.
      TYPES : END OF t_obj_tab.
      TYPES : tt_obj_tab  TYPE t_obj_tab OCCURS 20.
      TYPES: BEGIN OF t_zplm02,
               sbgvid TYPE zppr_de_sbgvid,
             END OF t_zplm02.
    *-- Internal Tables
      DATA: li_obj_tab    TYPE tt_obj_tab WITH HEADER LINE,
            li_report     LIKE rcgstdrecn OCCURS 20 WITH HEADER LINE,
            li_variant    LIKE rcgstdrecn OCCURS 20 WITH HEADER LINE,
            li_subid_tab  TYPE espre_subid_rep_tab_type WITH HEADER LINE,
            li_report_m   LIKE rcgstdrecn OCCURS 20 WITH HEADER LINE,
            li_variant_m  LIKE rcgstdrecn OCCURS 20 WITH HEADER LINE,
            li_subid_tab_m TYPE espre_subid_rep_tab_type WITH HEADER LINE,
            li_zplm02     TYPE STANDARD TABLE OF t_zplm02.
    *-- Structures
      DATA: ls_addinf     TYPE rcgaddinf,
            ls_rcgradmsel TYPE rcgradmsel,
            lw_zplm02     TYPE t_zplm02.
    *-- Variables
      DATA: lv_trtype     TYPE rcgdialctr-trtype VALUE 'D',
            lv_actype     TYPE rcgdialctr-actype VALUE 'D',
            lv_viewappl   TYPE tcgl3-repappl     VALUE 'MATMASTER',
            lv_sel_valdat TYPE rcgradmsel-valdat,
            lv_sel_langu  TYPE rcgradmsel-langu,
            lv_ucomm      TYPE syucomm,
            lw_gen        TYPE char10,
            lv_flag       TYPE esp1_boolean,
            lv_werks      TYPE werks_d,
            lv_bsbgvid    TYPE zppr_de_bsbgvid.
    *-- Parameters
      ls_addinf-aennr      = sy-datum.
      ls_addinf-valdat     = sy-datum.
      ls_rcgradmsel-sbgvid = iw_gen.
      ls_rcgradmsel-matnr  = p_matnr.
      ls_rcgradmsel-namcat = 'MATNR'.
      ls_rcgradmsel-reprefflg = abap_true.
      ls_rcgradmsel-numcat = 'NUM'.
    *-- Application Object
      li_obj_tab-repappl = 'MATMASTER'.
      li_obj_tab-objectkey = p_matnr.
      APPEND li_obj_tab.
    *-- Evaluate selection screen and fill keytab
      CALL FUNCTION 'C1G0_KEYTAB_FILL_FROM_RADMSEL'
        EXPORTING
          i_radmsel             = ls_rcgradmsel
          i_valdat              = ls_addinf-valdat
          i_actype              = lv_actype
          i_flg_popup_no_param  = abap_true
        IMPORTING
          e_flg_cancel          = lv_flag
        TABLES
          i_applobj_tab         = li_obj_tab
          e_keytab_report       = li_report
          e_keytab_variant      = li_variant
          e_subid_refreport_tab = li_subid_tab
        EXCEPTIONS
          OTHERS                = 1.
    *-- Initilize Report Header Buffer
        CALL FUNCTION 'C1AP_ESTDH_BUF_INIT'
          EXPORTING
            i_aennr  = ls_addinf-aennr
            i_valdat = ls_addinf-valdat.
    *-- Parameters
        ls_addinf-aennr      = sy-datum.
        ls_addinf-valdat     = sy-datum.
        ls_rcgradmsel-sbgvid = iw_gen.
        ls_rcgradmsel-matnr  = p_matnr.
        ls_rcgradmsel-namcat = 'MATNR'.
        ls_rcgradmsel-reprefflg = abap_true.
        ls_rcgradmsel-numcat = 'NUM'.
    *-- Application Object
        li_obj_tab-repappl = 'MATMASTER'.
        li_obj_tab-objectkey = p_matnr.
        APPEND li_obj_tab.
    *-- Initial report block tree of information
        CALL FUNCTION 'C1G2_ENTRY_INQUIERY'
          EXPORTING
            i_trtype              = lv_trtype
            i_actype              = lv_actype
            i_addinf              = ls_addinf
            i_viewappl            = lv_viewappl
            i_sel_valdat          = lv_sel_valdat
            i_sel_langu           = lv_sel_langu
            i_rcgradmsel          = ls_rcgradmsel
          IMPORTING
            e_okcode              = lv_ucomm
          TABLES
            i_keytab_report       = li_report
            i_keytab_variant      = li_variant
            i_subid_refreport_tab = li_subid_tab
            i_applobj_tab         = li_obj_tab.
    With Regards
    Rinzy Deena Mathews.

  • ALE IDOC Transfering Material Master From One Client to Another Client

    I am using ALE Idoc transfering material master from one client to another client with MATMAS msgtype the details of Idoc received on receiver side is showing message i.e no Idoc is selected at receiving side after passing partner number in WE02 transaction.
    As I am new to ALE/IDOCS , I am transferring material master from one client to another client with in same system on IDES using ALE/Idocs the details of IDOC received on receiver side is showing message i.e no IDOC is selected at receiving side after passing partner number in WE02 transaction and showing current status 51 instead of 53  i.e no details of IDOC is received at receiver side  using MATMAS Message-Type. It is <removed by moderator>
    Kindly provide solution.
    Naveen
    Message was edited by: Naveen Grover
    Message was edited by: Manish Kumar : Subject and formatting changed

    Hello Naveen,
    If the connection is available (test with SM59 + Connection identifier),
    after choosing your Connection you can test the connection:
    you might find the idocs with the daate when they where sent in SM58:
    The message says in this case there was no service, there might also be other errors like "wrong password" and so on.
    After solving the error, you can restart sending the idoc from this screen.
    Hope this helps .
    Regards,
    Gerlinde

  • How to extend material master product Hierarchy

    Hi,
    How to extend material master product Hierarchy
    Define Product Hierarchies (SAP Library - Material Master)
    In SAP help, the procedure is given, But in procedure we need to change standard structures and data elements.
    Need to know, This is only the possibilty?
    Need to change structure and data elements by Access key only or there is some other way.
    Regards
    Sukumar

    Hi,
    Use t.code:MM01 and in Copy From Field Give Material No ( u wan to copy) and in Next Screen Give Extending Plant & Storage Location and in Copy From Fields give Reference Plant & Storage Location.
    For more check the links for material extension.
    http://www.copacustomhelp.state.pa.us/infopak/nav/procurement/pr%20master%20data/file1434/index.htm
    http://www.copacustomhelp.state.pa.us/infopak/standard/fastpaths/mm01_content.htm
    Regards,
    Biju K

  • How to get Material Master Moving average price into Purchase Order

    Hi,
    How to get Material master moving average price into purchase order instead of Purchase Info record.
    Thanks,
    Sridhar

    Hi,
            I  cannot understand whether it is necessary .
           How about as following step?
                 1. create Purcahse requisition
                                Price come form moving average price in material master.
                 2. Create Purchase order reference Purchase  requisition
                                There is a setting  from the unit price of P/R onto the unit price of P/O.
      Regards,
         Gaito

  • How to avoid material master data migration of inactive materials to SRM

    We are replicating material master from R3 4.6b to SRM 5.0 system.  Under COMMPR01 , we can see the product status as deleted or locked .
    How we can avoid the master data replication of  materials which are already flagged as inactive (deletion) in R3.
    Pls suggest.
    Regards,
    Avinash

    Hi
    Please try this ->
    1) It is possible to use product_id without needing to replicate material masters from R/3 to SRM. For this to work you have to set the flag "Do not check product" in customizing
    (see SRM Server > Master Data > Define External Web Services).
    We do it like that and it works perfect for us. Only annoyance is, that we have to put leading zeroes in the product_id field.
    "Do not check product" is used to avoid product check in SRM (to avoid replicating products into SRM), so they are not checked against SRM product master.
    But this is not related to R/3 check.
    In a classic or extended classic scenario, SRM will check that this material exists in the backend, especially for the current plant (location), before creating follow on doc.
    As you created your catalog item without zeros, I guess SRM is sending this material to R/3 that does not recognize it.
    Then you have this error message. Adapt your product IDs to be aligned with R/3 material master.
    2) Try to run the report BBP_PRODUCT_SETTINGS_MW, there you select user as SRM instead of CRM and select service product active
    3) Did you already checked OSS note 722600 and 366135 ? Also, Check the SAP OSS Notes -  786345, OSS Note 456753. It talks abt the internal and external representation of product ID in catalog and R3 system.
    Related useful pointers ->
    Product xx does not exist in plant xx or it has been flagged for deletion
    Stock reservation movement (field XWAOK) is not flagged in ECC ??
    Product XXX  does not exist in plant YYY or it has been flagged for delete.
    material deletion flag
    Product XXX does not exist in plant YYY or it has been flagged for deletion
    Hope this will help. Do let me know.
    Regards
    - Atul

  • How to Delete the node from cluster when the machine crashed?

    In an three nodes Rac of 11g r2,How to delete the node from cluster when the machine crashed?
    There is now way to repair the machine and have to add a new one.
    What is step to follow up?

    hi
    IF YOU WANT TO DELETE RAC1 NODE
    check $./olsnodes
    1) delete the instance using dbca from any active nodes
    crs_stat -t
    srvctl stop asm -n rac1
    2) delete listener
    3) delete oracle_home from oracle user
    $ORACLE_HOME/bin/runInstaller -updatenodelist ORACLE_HOME=<db_home> "CLUSTER_NODES={RAC1}
    4)delete asm home
    $ORACLE_HOME/bin/runInstaller -updatenodelist ORACLE_HOME=<asm_home> "CLUSTER_NODES={RAC1}
    5) update cluster node
    $ORACLE_HOME/bin/runInstaller -updatenodelist ORACLE_HOME=<db_home> "CLUSTER_NODES={active nodes like rac2,rac3}
    6) update ASm home
    $ORACLE_HOME/bin/runInstaller -updatenodelist ORACLE_HOME=<asm_home> "CLUSTER_NODES={active nodes like rac2,rac3}
    cd $ORA_CRS_HOME
    cd crs/opmn/conf
    check for
    $cat ons.config
    remoteport=6200
    cd crs_home/bin
    $./racgons remove_config rac1:6200
    $ go to crs home
    and $ORA_CRS_HOME/crs/install/rootdelete.sh
    $ORA_CRS_HOME/crs/install/rootdeletenode.sh
    check for ./olsnodes

  • ERROR -WHILE LOADING MATERIAL MASTER FROM A FLAT FILE

    HI GUYS ,
    I AM TRYING TO CREATE MATERIAL MASTER FROM A FROM FLAT FILE
    IAM GETTIGN AN ERROR MESSAGE
    'YOU HAVE NOT FULLY MAINTAINED THE DESCRIPTIONS'
    REQUIRE HELP ON THIS
    THANKS

    Hello Nishant
    All the inputs that are required to create a material in dialog (MM01) should be mandatory as well if you are going for LSMW or BAPI. Obviously your material requires a description (which will end up in MAKT). If you have this description in your flat file then there are additional (perhaps language-dependent) descriptions required.
    You could try to use BAPI_MATERIAL_SAVEDATA in your test environment to find out the minimum input that is required to create a material in R/3.
    You may also have a look at thread what are the parameters have to pass to bapi material creation?
    Regards
      Uwe

  • Replication of Customer and Material master from R/3 to CRM

    Hi
    Recently in our quality server basis administrator has made a client copy from production server after that customer master and material master are not flowing from R/3 to CRM, even sales orders were not getting copied from CRM to R/3 , i went through C71 BB config document and fixed the sales orders updation from CRM to R/3 but not able to resolve the problem of customer master and material master from ECC to CRM.
    I went to B09 BB document and all settings are fine.
    Using R3AS I have loaded following objects DNL_CUST_PROD0, PROD1, PROD3, SPROD , DNL_PLANT. and Material.
    I went to R3AM1 and checked the status as running or wait for each object.
    There are no filters in R3AC1 .
    Queue name withR3AD_MATERIA0000000001 has status SYSFAIL in SMQ2  .
    What can i do to resolve this problem.
    Please advice.
    Thanks,
    Vaishnavi

    Hello Vaishnavi,
    After the client copy , have you run txn:BDLS in order to change the LOGSYS in all relevant tables?
    You can run this txn in test mode as well to see the affected tables.
    Are you getting any dump on these load ?Check it in txn:ST22.
    Hope this helps!
    Best Regards,
    Shanthala Kudva.

  • I have a macbook pro with OSX 10.9.3 and Safari 7.0.4. How do I remove BING FROM SEARCHING when i type something into the search bar

    I have a macbook pro with OSX 10.9.3 and Safari 7.0.4. How do I remove BING FROM SEARCHING when i type something into the search bar

    See below if the search engine setting was changed without your knowledge and you can't change it back.
    You installed the "Genieo/InstallMac" rootkit. The product is a fraud, and the developer knowingly distributes an uninstaller that doesn't work. I suggest the tedious procedure below to disable Genieo. This procedure may leave a few small files behind, but it will permanently deactivate the rootkit (as long as you never reinstall it.)
    Malware is constantly changing to get around the defenses against it. The instructions in this comment are valid as of now, as far as I know. They won't necessarily be valid in the future. Anyone finding this comment a few days or more after it was posted should look for more recent discussions or start a new one.
    Back up all data. You must know how to restore from a backup even if the system becomes unbootable. If you don't know how to do that, or if you don't have any backups, stop here and ask for guidance.
    Step 1
    In the Applications folder, there may (or may not) be an application named "Genieo". Genieo may be partially installed even if this item is absent. If it's present, select it and open the Finder Info window. If it shows that theVersion is less than 2.0, download and install the current version from the genieo.com website. This may seem paradoxical, since the goal is to remove it, but you'll be saving yourself some trouble as well as the risk of putting the system in an unusable state.
    There should be another application in the same folder named "Uninstall Genieo". After updating Genieo, if necessary, launch "Uninstall Genieo" and follow the prompts to remove the "newspaper-style home page." Restart the computer.
    This step does not completely inactivate Genieo.
    Step 2
    Don't take this step unless you completed Step 1, including the restart, without any error messages. If you didn't find the Genieo application, or if you couldn't complete Step 1 for any reason, stop here and ask for instructions.
    Triple-click anywhere in the line below on this page to select it:
    /Library/Frameworks/GenieoExtra.framework
    Right-click or control-click the line and select
    Services ▹ Reveal in Finder (or just Reveal)
    from the contextual menu.
    If you don't see the contextual menu item, copy the selected text to the Clipboard by pressing the key combination command-C. In the Finder, select
    Go ▹ Go to Folder...
    from the menu bar and paste into the box that opens by pressing command-V. You won't see what you pasted because a line break is included. Press return.
    A folder should open with an item named "GenieoExtra.framework" selected. Move that item to the Trash. You'll be prompted for your administrator password.
    Move each of these items to the Trash in the same way:
    /Library/LaunchAgents/com.genieo.completer.update.plist
    /Library/LaunchAgents/com.genieo.engine.plist
    /Library/LaunchAgents/com.genieoinnovation.macextension.plist
    /Library/LaunchDaemons/com.genieoinnovation.macextension.client.plist
    /Library/PrivilegedHelperTools/com.genieoinnovation.macextension.client
    /usr/lib/libgenkit.dylib/usr/lib/libgenkitsa.dylib
    /usr/lib/libimckit.dylib
    /usr/lib/libimckitsa.dylib~/Library/Application Support/com.genieoinnovation.Installer~/Library/LaunchAgents/com.genieo.completer.download.plist
    ~/Library/LaunchAgents/com.genieo.completer.update.plist
    If there are other items with a name that includes "Genieo" or "genieo" alongside any of those listed above, move them as well. There's no need to restart after each one. Some of these items will be absent, in which case you'll get a message that the file can't be found. Skip that item and go on to the next one.
    Restart and empty the Trash. Don't try to empty the Trash until you have restarted.
    Step 3
    From the Safari menu bar, select
    Safari ▹ Preferences... ▹ Extensions
    Uninstall any extensions you don't know you need, including ones called "Genieo" or "Omnibar," and any that have the word "Spigot" or "InstallMac" in the description. If in doubt, uninstall all extensions. Do the equivalent for the Firefox and Chrome browsers, if you use either of those.
    Your web browser(s) should now be working, and you should be able to reset the home page and search engine. If not, stop here and post your results.
    Make sure you don't repeat the mistake that led you to install this software. Chances are you got it from an Internet cesspit such as "Softonic" or "CNET Download." Never visit either of those sites again. You might also have downloaded it from an ad in a page on some other site. The ad has a large green button labeled "Download" or "Download Now" in white letters. The button is designed to confuse people who intend to download something else on the same page. If youever download a file that isn't obviously what you expected, delete it immediately.
    You may be wondering why you didn't get a warning from Gatekeeper about installing software from an unknown developer, as you should have. The reason is that the Genieo developer has a codesigning certificate issued by Apple, which causes Gatekeeper to give the installer a pass. Apple could revoke the certificate, but as of this writing, has not done so, even though it's aware of the problem. This failure of oversight is inexcusable and has compromised both Gatekeeper and the Developer ID program. You can't rely on Gatekeeper alone to protect you from harmful software.
    Finally, be forewarned that when Genieo is mentioned on this site, the perpetrator of the scam sometimes shows up under the name "Genieo support." He will tell you to run the provided uninstaller. As he knows and intends, the uninstaller does not completely remove the malware.

  • How to Create material master workflow

    Hi All,
    Can anybody tell me how to create material master workflow?
    i need to customize the workitem  for creating data in different views in MM01 transaction with restriction to particular user.
    Regards,
    Priti

    Hi,
    This link is to  display a material.My requirement is to create a workflow which will allow a responsible person to enter data for specific department data e.g Purchase,Accounting etc.Initially anyone can create data using basic data1 and basic data2 views.After this my workflow will be triggered and it will go to next person who is responsible to enter Purchase data and then Accounting data.
    Plz help me to create different views with respect to person.
    Thanks in advance.

  • I have an Iphone 4S, when I am on the phone and I get a new message my phone vibrates and rings. How can I stop this from happening when I am on the phone

    I have an Iphone $S, when I am on the phone and I get a new message my phone vibrates and rings, How can I stop this from happneing when I am on the phone

    Flip the Ring/Silent switch. Make sure Vibrate when silent is off in Settings>Sound.

Maybe you are looking for