How to un-exclude an external HDD from Time Machine

I just upgraded/replaced a 500GB Seagate drive with a 1TB Seagage Expansion external drive due to the size of my photo library. I want to continue to use Time Machine as my back up software (to a seperate 3TB drive). However, Time Machine won't allow me to un-exclude the new HDD (the old one is excluded).
I'm running OS X 10.7.5, and the new drive is formated in the FAT32 format. Is that my probem?
Thanks

Open Time Machine preferences, click on the Options button. At the bottom of the exclusion list click on the Add [-] button, select the drive in the File dialog, click on the Exclude button. Understand that this configuration will only remain as long as the drive remains mounted.

Similar Messages

How can I remove an external HDD from Time Machine

I want to remove an external HDD from Time Machine but it is not shown in the list, how can I do this please?

Open Time Machine preferences, click on the Options button. At the bottom of the exclusion list click on the Add [-] button, select the drive in the File dialog, click on the Exclude button. Understand that this configuration will only remain as long as the drive remains mounted.

How do i exclude internal hard drive from time machine?

I use OSX 10.7.4. My internal drive was maxed out so I copied it to an external and now I run my mac from this external drive. I want to use time machine to back up (to an additional external hard drive) but Time Machine fails because I don't have enough room. Whats happening is Time Machine wants to back up both my external drive (about 280 Gigs) and my internal (245 Gigs). I do not want or need my internal to be backed up however I cannot find a way to 'exclude it'.
In Time Machine/Options, my internal drive does not appear under devices. I have 3 external drives, (plus their partitions) but the proverbial Macintosh HD is not one of them. Even when I click the + to try and add to the devices which brings up the finder (and I check 'show hidden') still no dice.
Macintosh HD does appear in my finder.
I know one option would be to delete the contents of my internal drive, but I'm not ready to do that. I view it as my backup to my backup. It isn't updated, and it's missing things from the last few months, but in a critical failure, it might still be there.
Presumably all this is temp as I intend to replace my aging white imac with a new imac sometime this summer.
In the mean while though, I'd like time machine to do what its intended to do.
Thanks,
Bear

Open the TM preference pane, unlock it if necessary, and click Options. Click the "+" icon to add an exclusion. In the selection dialog, click the icon of your internal drive under DEVICES, then press return.

How do i change my computer hdd from time machine backup to normal so i can install mavericks

How do i change my computer hard drive back to normal cant install mavericks on it HELP !!!

Welcome to Apple Support Communities
You have got the "Backups.backupdb" folder in the root level of the hard drive. This is the folder used by Time Machine to save backups to, and the Mavericks installer has detected that your hard drive is the Time Machine disk when it's not.
To fix this, open a Finder window, select the Go menu (on the menu bar) > Go to Folder, and type:
Then, delete the "Backups.backupdb" folder and empty the Trash. Finally, open the OS X Mavericks installer again and follow the steps

I accidentally combined all of my photos on iphoto to be one event. i have it the way i want it saved on my external harddrive from time machine. how do i make my computer go back to that

i accidentally combined all of my photos on iphoto to be one event. i have it the way i want it saved on my external harddrive from time machine. how do i make my computer go back to that

Open Time Machine to the date that you know the iPhoto Library is in the format you want and select and Restore it.
http://pondini.org/TM/15.html
Ciao.

I backup to an external hdd with Time Machine, when it ran out of space it did not delete old backups, now my internal hdd says its full when before it had heaps of space. I have searched for extra files but cant find any. Can anyone help, please.

I backup to an external hdd with Time Machine, when it ran out of space it did not delete old backups, now my internal hdd says its full when before it had heaps of space. I have searched for extra files but cant find any. Can anyone help, please.

First, empty the Trash if you haven't already done so. Then reboot. That will temporarily free up some space.
To locate large files, you can use Spotlight as described here. That method may not find large folders that contain a lot of small files.
You can also use a tool such as OmniDiskSweeper (ODS) to explore your volume and find out what's taking up the space. You can delete files with it, but don't do that unless you're sure that you know what you're deleting and that all data is safely backed up. That means you have multiple backups, not just one.
Proceed further only if the problem hasn't been solved.
ODS can't see the whole filesystem when you run it just by double-clicking; it only sees files that you have permission to read. To see everything, you have to run it as root.
Back up all data now.
Install ODS in the Applications folder as usual.
Triple-click the line of text below to select it, then copy the selected text to the Clipboard (command-C):sudo /Applications/OmniDiskSweeper.app/Contents/MacOS/OmniDiskSweeper
Launch the Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Paste into the Terminal window (command-V). You'll be prompted for your login password, which won't be displayed when you type it. You may get a one-time warning not to screw up. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator.
I don't recommend that you make a habit of doing this. Don't delete anything while running ODS as root. If something needs to be deleted, make sure you know what it is and how it got there, and then delete it by other, safer, means.
When you're done with ODS, quit it and also quit Terminal.

How can I restore Parental Control Settings from Time Machine Backup?

I was trying to adjust one of the parental controlled accounts for my child. I disabled parental controls, rebooted, and re-enabled it. Now all the settings that I had setup before are gone. How can I restore Parental Control Settings from Time Machine Backup?

Hi ...
I've found a solution to my problem.
Time Machine locates extenal HDD backups differently depending if they were done via a network or via a USB/FireWire/Thunderbolt connection.
My initial backup was done via a direct Thunderbolt connection. I ran into the above issue b/c the second time when I tried looking for the backup file the HDD was conencted to my iMac and I was accessing it via a network conenction.
I simply connected the drive directly to my MacBook pro and ... voila. I was able to see the backup, select the iPhoto library and begin the restore.
Hope this helps.
BTW - I found this out by reading the 'blue box' selection on this page: http://pondini.org/TM/E2.html
(Thanks goes to Pondini!)

HT4927 How to restore photos in mountain lion from time machine ?

How to restore photos in mountain lion from time machine?

I have tried doing this but it dosen't work.
I opened time machine. I picked the file from the date needed.
I restored it (I told it to keep both).
Then when I double click on the file it opens a treminal window.
I have also tried opening iphoto while holding down the option key.
This file is not slectable.....
Any thought or ideas?

How do I restore smtp mail setting from time machine?

Earlier today I was fooling around with my smtp mail settings and managed to mess them up.
How do I restore smtp mail setting from time machine?
I'm using Lion 10.7.4
Messages and incoming mail works fine. It's just the smtp mail setting that's the problem.
Any help greatly appreciated.

The mail rules are stored in your ~/Library/Mobile Documents/com~apple~mail/Data.MailData folder, in a plist called SyncedRules.plist.
If you're signed into iCloud D&D, that's where you'll find it.
If you're *not* signed into iCloud, then you probably have a folder called something like ~/Library/Mobile Documents.####### where the # signs are actual numbers. Digging into that folder, you'll fild the SyncedRules.plist file.
Thing is, I don't know how Mail uses rules without iCloud; if there's a "local" rules location. There probably is, but someone else who's not using iCloud may have to help you there...

How do I back up an external HDD AND my macbook to another external HDD using Time Machine?

Hi,
My little old Macbook is pretty slow and clunky at the moment and I have decided to transfer my iphoto library to an external HDD named 'photos'.
I've check, it's all there - present and correct.
I've removed 'iphoto' from my 'pictures' folder on my macbook to trash.
I've tried to back both macbook and photos HDD to time machine but I'm unable to recover the photos HDD.
I have opened TM preferences, selected options and excluded the 'photos' HDD from backups as I was under the impression that the drive shown in the window is the drive used by TM.
Can somebody help me please. I've tried to recover a photo, just to test the backup but unable to find anything.
Kind regards
T

If I understand you correctly you want to back up two drives simultaneously. If that is correct, you will find a guide here: http://pondini.org/TM/32.html

How to retrieve files on external HDD via Time Capsule?

I have external HDDs connected to Time Capsule but when I access those HDDs, they don't show the files that were stored in them. However, when I check the "Get Info" on those HDDs, it shows how much capacity is used and how much is available. How can I retrieve my files on those external HDDs via Time Capsule? Many thanks for your help!!

How is the drive formatted?
Does it show up in the airport utility?
TC has very restricted ability to read HFS+ (ie standard Mac format) or Fat32.

Installed new SSD. How do I get my files back from Time Machine?

Hi all, if you take the time to read my issue, thanks a lot. I appreciate any help you can offer, and sorry if anything is unclear...
The 1tb drive eventually failed on my 2009 27", quad core i7 imac. I had USB backup using time machine to an external 2 tb disk.
Repair guy took my mac to his shop, and installed a new samsung 1tb SSD.
He had trouble reinstalling from my time machine backup - so he's just installing Yosemite (I was using 10.8.x?) and giving it back to me with a fresh install of Yosemite.
When he tried to use time machine to restore my system to how it was, he started the process, and it said that it would take 13 hours, so he left it overnight.
When he returned, he found a white screen with a frozen mouse pointer. He did a hard reboot, and then could not access the drive at all - the system would not allow him to read the drive and he had to take the drive out, reformat from another mac, and then install Yosemite again.
Now he has suggested that I simply drag and drop all my folders from the USB time machine backup into my computer, and seems to think this will get things back to how they were. I'm not sure that it works like that though...I'd expect certain applications need to be installed, settings changed, permissions granted, passwords entered...that kind of thing.
Now I have a choice - whether to
A) reinstall my applications one at a time, and then copy the data from my backup drive.
B) manually drag and drop all the files from the most recent backup folder into the "computer" folder. (This was his suggestion)
C) attempt some kind of migration using the Migration assistant. (I believe this is what the guy tried- he started it off, it said "13 hours remaining) he left it running overnight, and came back to a static white screen with frozen mouse, he powered down, then when he switched it back on, the screen did not load any OS (not sure whether it had booted into some kind of BIOS, but he said it was so unresponsive that he had to remove the drive and reformat it from another computer).
D) Try some other application for intelligently restoring my apps and data from the Time Machine backup.
To be honest, my main concern is screwing things up badly! I'm veering towards reinstalling my apps, even if it means fixing up preference settings and typing in codes etc... I would rather take a slow and steady approach rather than a "risk having to take it back to the shop/take it apart" approach.
Also, is migration different from restoring from time-machine?
Perhaps you could advise me? Many thanks

Restart the computer and hold the Command & R keys.
Thanks - I didn't know how to do that!
I did that, and it went through the steps for restoring from the time machine backup. I didn't click on "restore" just yet... My concern is that when the guy in the shop tried that, it resulted in the serious failure that required the drive to be removed and formatted from another computer.
I'm wondering what might have caused that - is it possible that the external drive had a failure, or (more likely) that the drive caddy it sits in briefly lost power or something?
Also, can you tell me if simply drag-dropping the files from the time-machine backup would result in everything returning to its initial state? Or is that (as I suspect) a bad idea?
Right now I have a fresh Yosemite install which works. I'd rather have that, and slowly restore my files and apps manually than risk getting the same result as the guy in the shop. Do you think that restoring from the restore partition is worth trying again?

Unable to exclude VMware disk image from Time Machine backup

In Time Machine Preferences, I elected to exclude home\Documents\Virtual Machines folder in my home directory. Whether I use the "+" button to add the exclusion or dragged it in from Finder, the exclusion list only shows [Virtual Machine]. Coming from a Windows world, I am concerned that I don't see the fully qualified path for the "Virtual Machine" folder name. Even the folder property doesn't show the full path information. Since I do not exclude Documents folder, it is included in all Time Machines backup. Unfortunately, so is my home\Documents\Virtual Machines folder.
Question #1: What am I missing?
This question is related to this next issue.
Question #2: If I have a folder called "Users Guide" in addition to the built-in "Documents folder in my home directory, and they each contain the sub-directory "Preliminary", how do I tell Time Machine I want to exclude the folder \User Guide\Preliminary from TM backup?

Thanks for the tip. Hovering does show the path. Now the mystery is a little worst than before, and I'm back to trying figure out how to exclude the home\Documents\Virtual Machines folder (where he VM disk images are stored) from Time Machine backups while it's allowed to backup home\Documents (as intended).
When I get back home tonight, I'm going to try excluding some other sub-folders (which I created) of [Documents] from Time Machine while I allow [Documents] to be backed up. I'll post the results, and hopefully can ask a smarter questions.

How do I restore an adjusted version from Time Machine?

I use time machine.
How do I restore an adjusted version?
E.g. I take a 1000 pix, bring them into a project, spend a few days making adjustments.
Client cancels project.
I delete project.
Month later I figure out a new market for that project. (Yeah, I shouldn't have been so quick to delete...Work with me)
I can restore the masters from Time Machine. (I use referenced images)
How do I recover my adjustments, without overwriting my library? Groveling through the .aplibrary they are stored as xml files, but there is a chane of references and set of encoding that is not transparent.
At this point the ONLY way I can see is to:
* Rename my present library
* Restore the entire library, whcih if I have lots of images can take hours.
* Find the project.
* Export the project.
* Delete extra library.
* Rename my original library.
While this gets my adjustments back, it does NOT get them back in an editable form. they are now locked in.
Is there a way to export versions as version info? E.g. as an xml file that sits in the same directory as the master?
Spin the question differently. How can I send YOU a set of versions of a particular master, WITHOUT copying the data of the master for each version.
Say we have referenced files on a network server. I want to send you a version, but NOT the master.
E.g. I send you ONE master, and 6 versions of it. In YOUR version of aperture how can you load the 6 versions to continue tweeking them.

There is another, huge thread on TM backups on this forum and exactly this issue has come up. Sadly, no one has a perfect answer. I do not have a spare drive available to test this myself, but I would try something along these lines.
-- Ask TM to restore your full Library and the Masters, if Referenced. I believe that TM will give you the option to not overwriting your current Library, but be careful. However you do, stick this "Recovery Library" out somewhere. (Yes, this is gonna take some time, run it overnight.)
-- Open "Recovery" with Aperture and select the Project(s) that contain the images you want. Export these "Projects as New Library." (Don't export as either Versions or Masters.) I would select the box "Consolidate Masters" and I would probably discard the Previews. Stick this somewhere.
-- Now open "Original Library" and import the "Library" that you exported back into your Original Library as something like "Stupid Lost Project."
-- You should now have a Project full of adjusted, and adjustable images. (N.B. this is basically the technique I use with my laptop. I shoot, load into AP3 on the laptop, noodle, and then export/import into AP3 on the MacPro when I get home.)
-- Clean up. (Delete "Recovery", convert the recovered Project back to Referenced Masters, if you wish, etc.)
One good argument for never throwing those old USB drives away.
I have missed some of the details in the process, so be careful, but I believe that this will work until Apple lets us run Aperture inside Time Machine.
Best wishes.

How can I restore an old backup from Time Machine to my iPhone 5?

I have the iPhone 5 that I had previously transferred my apps and other data to from my iPhone 4. Due to poor battery life, I had to restore the iPhone 5 as a new phone. This helped battery life but now I habve lost my text messages, App data and photos. I use Time Machine on my Mac so whayt do I need to do to get the data back on my phone. I'd like to do this without restoring the phone but rather syncing it with data recovered from Time Machine. I don't want to screw up the battery life again.

Hi ...
I've found a solution to my problem.
Time Machine locates extenal HDD backups differently depending if they were done via a network or via a USB/FireWire/Thunderbolt connection.
My initial backup was done via a direct Thunderbolt connection. I ran into the above issue b/c the second time when I tried looking for the backup file the HDD was conencted to my iMac and I was accessing it via a network conenction.
I simply connected the drive directly to my MacBook pro and ... voila. I was able to see the backup, select the iPhoto library and begin the restore.
Hope this helps.
BTW - I found this out by reading the 'blue box' selection on this page: http://pondini.org/TM/E2.html
(Thanks goes to Pondini!)

How to un-exclude an external HDD from Time Machine

Similar Messages

Maybe you are looking for