How to un hide Industry type in material Master - mm01

Dear All Experts
Kindly help to unhide Industry Type field in Material Master .
Regards
Alok

Edited by: Sridhar Jayavarapu on Aug 4, 2011 5:17 PM

Similar Messages

How can we update insp. type in material master on mass basis.

Hi Team,
We are using LSMW for material master. I was told that we can not update inspection type through LSMW. Is it possible thru LSMW if not, how can we update insp. type in material master on mass basis.
Is there any T-Code to update mass chages for inspection type in material.
Please suggest.
Thanks

Hi,
You can use TCode -QA08.
This Tcode have facility to Inspection Type activation in single / mass material.
Also useful for deactivation, special setting at Inspection Type level.
Regards,
JM

How to activate the new fields on material master(MM01/MM02/MM03) for existing Materials

Hi,
We have a requirement to add some custom fields as a new tab in additional data option(Descriptions, Unit of measure, etc.) in Basic data of Material master (MM01/MM02/MM03). I have successfully added and these custom fields and they are not part of standard(MARA, MARC) but a custom table and the updates are also done in custom table.
For new materials, I can see the new tab in additional data screens of basic data view and I could successfully create/change/display using MM01/MM02/MM03. However I cannot see the new tab/fields for existing materials in the system in all 3 tcodes (MM01/MM02/MM03). This is not a main view in material master so that I can extend it by MM01.
Is there any setting or mass generation program I have top perform so that I can see and maintain these new fields for existing materials. Appreciate any leads or help on this.
Thanks,
Harry

Hello Harry,
Goto t.code SPRO ---> Display IMG ---> Logistics - General --> Material master --> Configuring the material master --> Create program for customized screens
Use the above path and create the screen and assign it to the sequence using the below link as reference.
**************** - Tips - Implementing screen exits for MM01/MM02/MM03
Regards,
Thanga

Authorization material type in material master

Hi expert,
I want to know how to restrict users to create/change Material Master following
the material type in the role.
In role authorization Object: M_MATE_MAR Material Master: Material Types.
I maintain material type like ROH , HALB , HAWA in authorization Group.
But it is not work. Please help me.
Thanks,

Hi,
Pl. check your role to users for the material master again for allowed material types. It should restrict the users only for the selected views only. This should be done for all the roles assigned to users in relation to materail master. (i.e. Create, Display & CHange). If you restrict the material type in create role only & it is not restricted in display role, then user will be able to create all the material types. hence restrict the material types in all roles related to material master (create, change, display) assigned to the user.
Regards,
Prashant

Message Type for Material Master Data Changes

Hi all
I'm managing Message Types for Material Master Data extraction from R\3 system to BW system, in order to load on BW only the changes done to some fields of MARA table that are delta relevant.
Now from R/3 BD50 Transaction I can see that there is a message type that refer to changes done on MARA fields: RS0044.
I would like to replace this message type with another one (RS0020) in order to align different systems.
Now changes to material master data in R/3 system are recorder with both message types but only those with RS0044 message type are processed and loaded into BW system.
So I would like to know:
1. How is the message type related to the DataSource 0material?
2. is it possible to replace a message type for BW?
3. if yes, how can I do it?
Thanks in advance.
Elisa
mail: [email protected]

Hi Oscar!
At the moment I'm using Delta queue of 0MATERIAL. I know that in the queue there are all the new and changed records.
But I would like to be able not to load all the changed records, but only those that refer to some fields of MARA table.
E.g. if the gross weight of a material is modified I don't want to load this change on BW with Delta loading .
I've seen that from R/3 Transaction BD52 you can set only delta relevant fields referred to a specific message type and to delete the other fields.
As I'm able to do this directly in the Development system and Test System, I haven't got the authorization of doing it in the Production system.
That's why I need to include this setting in a CR and then ask to transport it from Test to Production system.
But message types referred to MARA field changes are different between the two systems.
And it seems they are automatically created.
Is it true?
Thanks
Elisa

Deactivate inspection type from material master

Dears
i have a inspetion qty with satus LTCA CHCR(Cancelled inspection lot)
Now i need to deactivate inspection type from material master
system not allowing to deavtivate as inspection lot was there
how to remove the insepction qty form system
Any tips
Faisal

Hi Faisal,
Hi Faisal,
Try this way,,,
Run QA08
Enter the Plant, Material Code
Then go for the Fourth tab "Mass Processing"
Activate the check box for Activate Despite Inspection Stock and Create Change Documents
Then insert the inspection type.
Execute
System will prompt a screen similar to Inspection set up from MM02, there deactivate the inspection type and press Enter.
Select the Line item and Save.
Pls let me know if doesn't work.
Regards,
Shyamal
Let's do it again, When you complete the following steps, are you getting any list of materials there? after completing it up to
System will prompt a screen similar to Inspection set up from MM02, there deactivate the inspection type and press Enter.

Need to create a Store Business document type for material master and store a sharepoint link

Hello,
I need to create a Store business document type for material master and store a URL link . How do I do that?( or is there any functionality to upload a document for a store business document that it will automatically saves to sharepoint?)
Thanks,
Ran.

>
dhayes12 wrote:
> A) When I do the (Material Backflush) MFBF for the 04 type, the Inspection Lot gets created OK. I then can go into QA32 and assign the correct Inspection Plat by clicking the Inspection Lot button.
>
> B) When I do the MIGO via the Purchase Order (type Z01), it will not create the Lot if I have the Multiple Specs selected in the QM Material Master MM02. If, I turn off the Multiple Specs in the QM Material Master and create a new PO and MIGO, it will create the Lot, however, it automatically assigns the lot to the wrong Inspection Plan (2nd Plan see above) I need to be able to select the plan like I can with the 04 type.
>
> Is their some setting that can be changed in Config or somewhere that acts the same way as example A above?
For case A, create insp plan with usage "1- production" If you have one IP with this usage for given material then system will assign Plan to lot automatically. In your case for second plan update usage as 1.
For case B, system should assign 1st plan make sure for both plan udage is correct. for 1st plan usage should be 5 while 2nd plan usage should be 1. Now if your 1st have status 4 and key date before lot date then system will assign plan auto.
Thanks!!!

How to use the customer types in customer master data

how to use the customer types in customer master data?
menu path is Extras -> account group info -> customer types

hi,
This is an option given to you to choose (if you need to) the way you perceive this customer.Here you get options including ompetitors,Salespartner, prospect,
default sp ,consumer.
See it helps you to differentiate between prospect(which you may use for quotation or inquiry purpose)Sales partner and the competetor.
I hope this clarifies your quiery.Reward points if so.
Thanking you,
Best regards,
R.Srinivasan

Kindly give authorization object for mrp type in material master

Hi friends,
Kind tell me what is the authorization object for MRP type in material master.
Your help is considered more important.
thanks in advance
willaims

hi,
check your authorisation objects here:
Go to PFCG --> Environment (at menu bar) --> authorization objects --> Display...
Here see for MRP and MM for material managament in the tree structure...
Regards
Priyanka.P

Valuation type in material master

Dear SAP GURU'S
please tell me what is a valuation type, it's uses and what are it's setting so that i can get the valuation type in material master.
thanks and regards.

Hi Yogesh ,
Valuation type is A subdivision of a valuation category in split valuation.
Example
An enterprise manages its stocks of a material using the valuation category "Quality", comprising the following valuation types:
High quality
Average quality
Inferior quality
Valuation category: A criterion for the separate valuation of different stocks of a material managed under one material number for quality and other purpose ...
If you have any further query on the same then let us know ........
Thanks
Kaushik

How to cancel serial no. profile from material master ?

dear all SAP experts,
I have 1 mateial in which i assign serial no. profile in work scheduling view in material master. So how can cancel serial no. profile from material master ?
Suggest me
regards,
Nitin Nerkar

As long as no serial numbers exist for the material you are able to cancel or change the serial number profile.
As soon as serial numbers exist for the material and you want to change or delete the serial number profile, you must note the following:
The previously assigned serial numbers are no longer suited to the current serial number profile.
The indicator for the stock check may have changed. If this is the case, you can copy the profile settings in the serial number using the executable report program RISERNR9. However, you should only start this program once the changes have been updated in the material master record.
You can no longer delete the serial number profile in the material master record. Instead of this, you create a serial number profile without serialization procedures in Customizing and enter this in the material master record.

Adding a new long-text type to Material Master

We need to add a long-text type to Material master, in addition to Basic, Inspection and Internal comment texts.
What would be the best way to do this?
Is there configuration that will allow the generation of a new tab in MM01 - Additional data screen, along with Basic, Inspection etc or should we create a new Screen exit for the new Text type to be edited?
If a screen Exit is available could you please name it?
Thanks a lot for the help - in Advance.

Hi,
You can add your own tabstrip in material master and put your long texts on it.
Please have a look at transactions OMT3C, OMT3B, OMT3E.
All customizing for material master extention can be found in SPRO -> Logistics - General -> Material Master -> Configuring the Material Master.
Krzys

Maintain Text Types in Material Master

Hi,
Is it possible to maintain different text types in the materials master "Sales text" tab just like we can maintain at the sales order header and item levels.
In VOTXN there is no option for configuring text types for material master (text object MVKE) so I was wondering that if it is possible at all. Please let me know if you have any idea on the same.
Regards
Deepak

Hi Deepak,
In Material Master you can maintain the "Basic data text". It can be maintained in Basic data 1 view by selecting the Additional data. This text can also be fetched according to your requirement with the help of developer.
Thanks,
Sravan

TCode for collective changes in inspection type in Material Master

Hi
Can any one tell me the TCODE for mass changes for inspection type in Material Master.
Charuhas

you can use MM17 or through LSMW or create a BDC through ABAP.
Regards,
qsm sap

Please guide me how to include storage location to existing material master

Hi Guru's,
Please guide me how to include storage location to existing material master....
please provide step by step process or provide any documentation that would be helpfull to me...
please let me know of my question is not clear..
Thanks in advance and will give full points....
Srinivas...

Hi
First :- You can define the storage loctions in the plant under the customization :- SPRO -> Enterprise Structure ->Definition -> Materials Management ->Maintain storage location
Once defined under the plant, you can create the same storage locations in the material master
Second :- Under SPRO -> MM -> Inventory -> palnt parameters, for your plant check the field " Create Storage locations Automatically" . This will lead to create new storage locations at the time of GR, even if you have not maintained under step 1.
Hope it answers your question.
Regards,

How to un hide Industry type in material Master - mm01

Similar Messages

Maybe you are looking for