How to Unassign a Configurable Material to Material in MRP3 View

Hello All,
Is there any way to Unassign a Configurable Material to Material in MRP3 View, the fieldl are greyed out.
We accidentally assigned a Configurable Material to Material in MRP-3 View.
Any Inputs would be of Great help.
regards,
BRN.

Guys,
Want to share what we have done further to resolve the issue,
Though SAP says this cannot be undone and recommends to archive the material and proceed completely new.....sometimes this maynot be realistically practical.....
here is what we did,
If we remove just the CUOBJ and STDPD values in MARC table, there can be inconsistencies existing in the tables and when for any reason if we want to assign the configurable material again in MRP3 view, SAP throws out a dump........
there is FM provided by SAP " CUCB_CHECK_AND_DELETE_CONF " which can used to remove all the corresponding entries in the remaining tables....following data is necessary...
ROOT_INSTANCE = CUOBJ value in MARC table.
OWNER = LeadingZeroesMaterialPlant Ex. 000000000001234560001
Note: The FM doesnot remove entries in MARC tables, hence removing CUOBJ and STDPD values in MARC still has to be done manually...
Regards,
BRN

Similar Messages

How to create Variant Configuration Material Master in SAP PP

Dear Friend's,
Pl 's guide me for How to Create Variant Configuration Material Master.
Give me step by step procedure for Creation of Variant Configuration.If some of you having screen shots for the same with one Example, that will be a very helpful to me for creating VC.
Thanks & Regards,
Sandeep N.Theurkar

Hi,
Eg: Ford car.If a sale order is raised for fiesta lxi model the system should choose red colour & for vxi blue colour respectively.
ie you need to define the characteristic and assign the values .
This characteristic need to assigned to class.
class need to be assigned to material master
1. T.code : CT04(characteristic) FORD_MODEL, Choose single value & entry required tab & give the input as 01 - fiesta_lxi & 02 - fiesta_vxi.( characteristic values)
2.Tcode: CT04, FORD_BODY( another characteristic)
Choose single value , don't click entry required.
01 - Red( characteristic values)
02- Blue
3. Create class T.code : CL02
fiesta_class
type : 300
4. OBJECT DEPENDENCY:
T.CODE : CT04
FORD_MODEL
CLICK VALUES TAB,
IN FIESTA_LXI CLICK THE 'O' meant for Obj dependency, action & extra.
Edit the dependecy,
010 $Self.ford_body = '01'. & save
Repeat the same for FIEST_VXI & instead of '01' give '02' for blue colour.
, then create a ROH as ford_body. & a KMAT material for the car. .
Then create a Super BOM with usage 3 & give component as ford_body
Then use T.code cu41 (Create config profile)
enter a profile name & class 300 & choose class assignment, choose fiest_class ,
Use T.code cu50 to check the values.
Then create a sale order.
Pl. reward if helpful.
Regards,
nandha

Adding configurable material in MRP3 using MATMAS .

Hi All,
I am working on creation of material using idoc ., message type is MATMAS and basic type is /AFS/MATMAS05. In the view MRP3 we have a field called 'CONFIGURABLE MATERIAL ; and I am trying to pass the configurable material into this space using segment E1MARCM where we have a field configurable material. But I am not able to see this detail when checking the material master, whereas other details required for the material are being added up.
Can someone guide me in the matter.
Thanks,
Vengal Rao.

please check OSS Note 64254 - Transfer of material master data - exceptions
among others it is said:
Data transfer is not supported for the following material master data:
7. Assignment of configurable material and characteristic value assignment for product configuration

Is there any bapi to upload c/s value for a material in MRP3 view.

Hello Expert
Is there any bapi available to change material and upload the characteristic values in its MRP3 view? I want to change material and assign values for characteristic, I got one bapi /SAPMP/BAPI_MATERIAL_SAVEDATA which change material.. but I donu2019t know how to use it.. i.e. how to set c/s vales in MRP3 view. plz help.
-Shweta

Hi
Check the BAPI
<b>BAPI_CHARACT_CREATE</b>
<b>Reward points for useful Answers</b>
Regards
Anji

How to configure Material Master

Dear Guru,
May I know how the steps to configure material master?
Thank you.
Rgds,
Goh Yen

Hi,
Follow the below steps for customization of material master
1. Material Number:
SPRO -> Logistic - General -> Material Master -> Basic Settings -> Define Output Format of Material Number
TCODE: OMSL
2. Define Field Reference:
SPRO -> Logistic - General -> Material Master -> Field Selection -> Maintain field Selection For data Screens
T CODE: OMS9
3. Define Industry Sector:
SPRO -> Logistic - General -> Material Master -> Field Selection -> Define industry Sectors and industry -sector- specific Field Selection
T.Code:OMS3
4. Material Type:
SPRO -> Logistic - General -> Material Master -> Basic Settings -> Material Type ->Define attribute of material Type
T.Code:OMS2
(Select Material Type: ROH for ur raw material( example) copy it and renamed it to UR RAW MATERIAL)
5. Define Screen Sequence:
SPRO -> Logistic - General -> Material Master -> Configuring the Material Master -> Define structure of Data Screens for each Screen Sequence
T.Code:OMT3B
(Select Screen Sequence: 21, copy it and renamed it to Z with any letter( Like ZA or ZB )
6. Ordering Screen Sequence:
SPRO -> Logistic - General -> Material Master -> Configuring the Material Master -> Maintain Order of main and Additional Screen
T.Code:OMT3R
7. Assign Screen Sequence to Industry Sector:
SPRO -> Logistic - General -> Material Master -> Configuring the Material Master -> Assign Screen Sequences to User/Material Type/Truncation/Industry Sector
T.Code:OMT3E
8. Assign Field Reference to Plant:
SPRO -> Logistic - General ->Material Master -> Field Selection -> Define Plant -Specific Field Selection and Plant -Specific Screen Selection
T.Code:OMSA
9. Define Material Group
SPRO -> Logistic - General -> Material Master -> Setting for Key Field -> Define Material Group
T.Code:OMSF
10. Define Number Range of Material:
SPRO -> Logistic - General -> Material Master -> Basic Settings -> Material Type ->Define Number Range for each Material Type
T.Code:MMNR
11. Define Purchasing Group:
SPRO -> Material Management->Purchasing->Create Purchasing Group
T.Code:OME4
Regards,
Biju K

How to put configurable material in finished stock???

Hi
How to put configurable material in finished stock?? wt is transaction code??or is there any different process for that?????????//

Hi
In Variant Configuration Scenario stock will be maintained for the material variants not for the K-mat directly. Certain Material Variants will be Produced and Kept in stock before a sales order will be raised by customer for the K-mat
Material Variant Creation Steps (Material variants are the stockable items in VC Scenario)
1) Create a MV with Material type FERT and Stg 10 or 40 (Classification view not essential)
2) Assign the K-mat material to this MV in Basic data - 2 view in Cross Plant CM field and click on Configure variant tab to select the fixed char value combination for this MV. Do the same steps in MRP-III view
Regards
Brahmaji
Edited by: Brahmaji Devarapalli on May 13, 2009 7:32 PM

How to configure Material Ledger?

Does anybody knows how to configure material ledger? Please give me details on how to configure. Please and thank you.

Hi,
Here you need to define the valution method in t.code"OB59"
then you need to assign the GL like forex gain and fore loss accounts in t.code"OBA1", now if you think there is difference then you can valuate in t.code"F-05".
Hope understood and you can reward if you are cleared.
Thanks,
Vasu..

How to do the Partial delivery for configurable material ?

Hi All,
I am creating a sales order for a configurable material and is trying to do the partial delivery for the same. But, after the outbound delivery the status of the sales order is shown as completed although I have done the partial delivery.
Here are the steps I followed.
1. material I used here is a configurable material.
Main settings.
a. In Basic Data tab, marked as configurable
b. Procurement type='E' in MRP 2 tab
c. Strategy group as 82 in MRP 3 view.
2. I created a sales order for quantity 10
3. Created a production order followed by goods Movement thereby increasing the stock.
4. Did the outbound delivery for quantity 5.
Now if I checked for the status of the sales order using VA02, the status for the line item as well as for the sales order was "Completed" although I had done partial delivery.
I have checked for setting in Customer master record, item category in VOV7. Everything seems to be fine.
I checked for all the information in the FORUM without any help.
Can you please help me?
Kind Regards,
Anupama

Hi,
For Info, I am creating a sales order for Item category TAC.
1. In my case, after completing the partial delivery, in the document flow for Order, the status is shown as completed.
2. In status overview for this item, delivery status indicator is set as 'Fully delivered'.
I did check in the customer master record and the field
Partial delivery per item is set to Blank( Partial delivery allowed)
3. I did run the report RIBELF20 and I am getting this error for all the sales order I created for partial delivery for configurable material.
For Normal item, the status is showing properly.
Is there any other settings I have to check?
I needed this to be working. Please help

Creation of Sale Order for configurable material with availability check.

Hi,
We have a scenario in which the material is configurable. The configurable material (X) has few variants (Ex: X1, X2, X3, X4, X5). While booking the sale order, we use the material number (X).
Further, the material planning is done for the variants X1, X2, X3, X4, X5. The standard variants are planned for production in advance.
1.     While booking the sale order, we want the availability check of the stock (type matching to happen). What needs to be done in configuration?
2.     While booking the sale order, there is a possibility that the configuration selected will not match with any of the standard variants due to some additional requirements of the optional features, in such cases how to link the standard variants to the sale order & create requirement for additional requirements.
Regards,
Umesh

Hi Umesh,
           1.Create material master for configurable material and variants in mm01.
           2.Maintain BOM for the configurable material in CS01
           3. Configur the variant configuration steps
              a. Create charecteristics T.code CT04
              b. Create values and assign classes
              c. assign the values to charecteristics
              d . Maitain dependence T.code CU01
              e.create configuration profile t.code CU41
              f.stimulate the configuration profile.
4. Do the availability check configuration through this path
IMG --> Sales and distribution > Basic functions ,> Availabilty check and Transfer of requirements.
5. Maintain the Availbility check field and MRP views in the material masters other wise you sit with PP people and do that
I hope it will help you
Regards,
Murali.

Issue in consumption of forecast for configurable material

Hi,
we have a issue in consumption of forecast by sales order for a configurable material.
Please find the below details for the settings maintained and the steps followed.
Please let me know how we can overcome this issue.
settings in R/3
1. Class and characterisitcs are created in R/3
2. standard material was created and class assigned
3. planning strategy used is 56
4. material, class, characteristics,ATP check, ATP customizing , sales order were integrated to APO
Settings in APO
1. CBF table, CBF profile, Consumption group were created in APO
2. Consumption group is attached to the product master
following steps were followed.
1. Forecast was created in DP for a certain characterstics ansd relaesed to SNP/PPDS
2. forcast is visible in product view
3. sales order was created in R/3
4. slaes order is visible in APO but it is not consuming the foreacast for the same set of characteristics.
Please let me know how we can overcome this..are we missing any customization ...?
Thanks
Ram

Hi Srinivas,
thanks for your response.
The forecast consumption problem was solved after correcting the entries in requirement strategy.
have one more query.
when the sales order for a configurable material is transferred from R/3 to APO, we should be able to see the values under "descriptive characteristics tab" in APO product view.(when we click on the green triangle representing the configuration).
However, we could see the values under "descriptive characteristics tab" for some of the characterisitcs and not for other characteristics.
we tried comparing the characteristics but could not figure out the reason.
any pointers / clues to come over this issue would be helpful.
thanks
Ram

Configurable Material : error while creating value contract

First snapshot of our Configurable Material 'Material 01'
In MM03 > Basic Data 2
under Client specific configutarion
Cross-Plant CM : (material 01)
Varient (checkbox checked)
In MM03 > MRP1
MRP Type: PD
In MM03 > MRP3
Plant-specific configuration
Configurable Material : Material 01
Varient (checkbox checked)
Planning Varient (checkbox checked)
When we are raising value contract, we are getting error
'Material 01 has status: Configure to Order'
In Item category assignment we have assigned Zw1 (value contract doc type) on lines of 'OR doc' type as follows
SaTy ItCGr Usg   HLevltCA Difftc MltCa
Zw1 0002 blank blank    TAC    TAM
Zw1 0002 blank TAC      TAE
Zw1 0002 blank TAE      TAE
Zw1 0002 blank TAM      TAC
Still we are getting same error .how to resolve this.
Thanks
Rohit

closing...

Make to Order for Configurable Material & Error in Confirmation

Hello, PP Gurus,
I am doing one MTO for Fabric business but during the confirmation I am getting error that
SALES order Stock does not Exist as well Please inform me Costing procedure in this scenario.
*is it necessary to run MRP in this scenario?*
Please see the all Details of Business so that U can give answer properly.
One is raw fabric (Raw material) which has to passed different process to convert Colored fabric as my Finish product as well I can sale Raw fabric also.
is it possible to maintain raw fabric and Colored fabric with same mat.code?
I have configured the material as well all pricing BOM, Recipe its working properly.
How can I assign the material to Operation? I am getting GRAY field in New Assignment in change recipe mode ..
Is it possible to use Material type other than KMAT? I want to use Finish material type. If yes How?
Right now I can create Process order from the Sales order but I am facing error in confirmation that Sales Order stock does not exist than I have to transfered stock to Sales order and error get solved temporarily but I want to avoid this manual transaction to remove this error. Any configuration is required please inform.
My configuration is given below.
MRP Type : PD
BOM item Category: L Stock Item.
In dependency & Profile I have set radio Button as Single level Bom explosion.
Order Bom selection in profile.
Strategy : 25 make to order for configure material.
How can I do ? please suggest any changes
I have only 9 months of SAP experience within short time I have gain lot knowledge from this site and other reading material as well my learning Learning thirst.
thanks to all SAP gurus..
THANKS IN ADVANCE .... Definitely I will reward points even if my some questions get solved...
Regards,
Bhavik dangi.

Hi,
You can use variant configuration for selling the colored fabric. Use the basic fabric as raw. and maintain variant configuarations to have many variants.
Please use strategy 25. When you run MRP the planned orders will be generated and will be assigned to the sales orders. You can see it on the account assignment tab.
In material master pleasse maintain Individual collective requirement indicator to 1-individual in the MRP-4 view.
Then the stocks will be reserved to the specific sales orders.
Thanks and regards
Murugesan

Configurable Material as BOM component in SALES Order BOM

Hi Gurus
I have following
1. Material ABC is a configurable material (variant)
2. BOM of this ABC has further configurable materials
Is it possible to maintain requried charasterstic of the compoents which are configurble at the time of SALES ORDER BOM CREATION.
If yes, how. please explain.
Thanks in advance
sunil

Dear Sunil,
Please refer to the following link:
http://sap-img.com/sap-sd/sales-bom-implementation.htm
I will suggest you to visit http://sap-img.com/sap-sd.htm. It will give you the overview of SAP SD module.
Moreover there is a separate section of FAQs with answers which will help you in great deal.
Do let me know in case of any queries.
Hope this helps you.
Do award points if you found them useful.
Regards,
Rakesh

BAPI_SALESORDER_CREATEFROMDAT2 with configurable material

Hello everybody.
I have been looking for information and I can't find how to do it. I can create the sales order, but without any configuration value.
Please, Can anyone tell me who I have to call BAPI_SALESORDER_CREATEFROMDAT2 with configurable material?
     lv_configid = ld_itm_number1."item position
      lv_inst_id = lv_inst_id + 1.
      CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
        EXPORTING
          input = lv_inst_id
        IMPORTING
          output = lv_inst_id.
      lv_root_id = lv_root_id + 1.
      CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
        EXPORTING
          input = lv_root_id
        IMPORTING
          output = lv_root_id.
      li_order_cfgs_ref-posex = ld_itm_number1.
      li_order_cfgs_ref-config_id = lv_configid.
      li_order_cfgs_ref-root_id = lv_root_id.
      APPEND li_order_cfgs_ref.
      li_order_cfgs_part_of-config_id = lv_configid.
      li_order_cfgs_part_of-parent_id = lv_inst_id.
      li_order_cfgs_part_of-inst_id    = lv_inst_id.
      li_order_cfgs_part_of-obj_type   = 'MARA'.
      li_order_cfgs_part_of-class_type = '300'.
      li_order_cfgs_part_of-obj_key    = it_pedidos_pos-matnr.
      APPEND li_order_cfgs_part_of.
      li_order_cfgs_refinst-posex     = ld_itm_number1.
      li_order_cfgs_refinst-config_id = lv_configid.
      li_order_cfgs_refinst-inst_id   = lv_inst_id.
      APPEND li_order_cfgs_refinst.
      li_order_cfgs_inst-config_id = lv_configid.
      li_order_cfgs_inst-inst_id   = lv_inst_id.
      li_order_cfgs_inst-obj_type      = 'MARA'.
      li_order_cfgs_inst-class_type    = '300'.
      li_order_cfgs_inst-obj_key = it_pedidos_pos-matnr.
      li_order_cfgs_inst-quantity = 1.
      CONDENSE li_order_cfgs_inst-quantity.
      li_order_cfgs_inst-complete      = 'T'.
      li_order_cfgs_inst-consistent    = 'T'.
     li_order_cfgs_inst-persist_id_type = 'G'.
     li_order_cfgs_inst-quantity_unit = 'ST'.
      APPEND li_order_cfgs_inst.
      li_order_cfgs_value-config_id = lv_configid.
      li_order_cfgs_value-inst_id = lv_inst_id.
      li_order_cfgs_value-charc = 'Z_MC_NOMBRE'.
      li_order_cfgs_value-value = it_pedidos_pos-nombre_serigr.
      APPEND li_order_cfgs_value.
      li_order_cfgs_value-inst_id = lv_inst_id.
      li_order_cfgs_value-charc = 'Z_MC_LETRA'.
      li_order_cfgs_value-value = it_pedidos_pos-tipo_letra.
      APPEND li_order_cfgs_value.
Thank you in advance.
Regards.

Hi REIS did you get any answer to your pb I have exactly the same request .
these internal id for instance and configuration are confusing .
Thanks for your return if your pb has been solved since .
Rgards
Yvon

Routing for configurable material

Hello PP gurs,
I want to create Routing for Configurable Material in SAP PP-PI or PP industries. How the object dependency is defined applied ?
This requirement is for Make TO Order scenario for Configurable Material.
At present I am working with resources only.
I want to create in such away So that while creating Production order system should ask select BOM & routing.
How can I define the Super BOM & Super Routing in Order?
Is it possible to calculate cost for this kind of requirement?
Please Give your Contribution from Whatever the Questions above....
Thanks & Regards,
Bhavik Dangi.

Dear,
In can explain youn w/ example
Let us say you have to manufactur CAR's(matyerial no in SAP is CAR). The coonfiguration options are - Paint, and tyre
Create a char inn CT04 as piant and tyre with value as below(data type = char)
Paint - white, red, blue and black
Tyre - Redial, Normal
Create materials like White-paint, Red-paint, Blue-paint, black-paint, Tyre-redial, tyre-Normal, Engine
Create a class in CL01 called CAR-CLASS , clas type 300 and assign the above Char to this class
Assign this class to Material CAR.
Create BOm with following items
Engine
White-paint
RED paint
Blue-paint,
black-paint,
Tyre-redial,
tyre-Normal,
Create a object dependency in CU40 type - selcetion condition to selcet red-paint material when in Sales order select paint red. and like this all others.
Selection condition for red paint is as below
Paint = 'red'
Like this for all others
Paint = 'white'
Paint = 'black'
Paint = 'blue'
Tyre = 'Normal'
Tyre = 'Redial'
Assign this object dependency to BOm items
Engine
White-paint -
>Paint = 'white'
RED paint -
>Paint = 'red'
Blue-paint, -
>Paint = 'blue'
black-paint, -
>Paint = 'black'
Tyre-redial, -
>Tyre = 'Redial'
tyre-Normal---->Tyre = 'Normal'
Now create a configuration profile
When you create a Sales order, system will pronmpt to enter the vlaues for piant and tyre
if you have selceted piant as red and tyre as normal, then the BOm will look like as below
Engine
RED paint
tyre-Normal
This is the configured BOM...what you have cretaed is supre BOM.
It is available in PP
For nmore information see blow
http://help.sap.com/saphelp_47x200/helpdata/en/92/58d455417011d189ec0000e81ddfac/frameset.htm

How to Unassign a Configurable Material to Material in MRP3 View

Similar Messages

Maybe you are looking for